RMAN-03009 / Failure Of Backup Command On ORA_DISK_2 Channel
Jul 4, 2010
when im taking backup on rman it showing the error like this
RMAN-03009:failure of backup command on ORA_DISK_2 channel
ORA-19502:write error on file "disk1/oradata/car/rm/Oalhudpe.bkp". block number 16385(block size =8192)
ORA-27072:FILE I/O ERROR
Linux Error:2:no such file directory
addittional information:4
addittional information:16385
addittional information:823296
View 2 Replies
ADVERTISEMENT
Sep 17, 2013
I've attempted to backup my database using RMAN but i got the ERROR that follows:
RMAN> backup database; output:Starting backup at 16-SEP-13using target database control file instead of recovery catalogallocated channel: ORA_DISK_1channel ORA_DISK_1: SID=20 device type=DISKchannel ORA_DISK_1: starting full datafile backup setchannel ORA_DISK_1: specifying datafile(s) in backup setinput datafile file number=00001
[code]...
View 4 Replies
View Related
Jul 19, 2013
I am running Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
I ran the following commands in RMAN:
RMAN>
connect target /
CONFIGURE COMPRESSION ALGORITHM 'MEDIUM' ;
set encryption identified by 'xxxx' only;
run {
[code]...
I get the follwing error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ch1 channel at 07/19/2013 06:57:4
ORA-03113: end-of-file on communication channel
[code]...
View 3 Replies
View Related
Mar 19, 2009
Would like to check how do we check the current value for limit channel in rman backup..
eg set limit channel d1 kbytes 2024800;
View 2 Replies
View Related
Sep 21, 2012
What is Channel in RMAN Backup. What is the use of Channel In RMAN?
View 2 Replies
View Related
Apr 24, 2013
it is necessary to allocate channel for rman back up and during rman back up what should be the state of target database me script for configuration and incremental level 1 daily back up script
and normal oracle secure incremental level bacl up script back up should be done daily
View 2 Replies
View Related
Jul 8, 2012
The RMAN backup is failing daily due the below issue..
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 07/08/2012 02:10:38
RMAN-10038: database session for channel t1 terminated unexpectedly
database version : 10.2.0.4.0
RMAN Script :
run {
allocate channel t1 type 'sbt_tape'
parms 'ENV=(TDPO_OPTFILE=/u001/app/TDP/p0137x/tdpo.opt)'
format '%d_inc0_%U.rbck';
backup incremental level 0 database tag OPEN_INC0_DAY;
release channel t1;
}
View 1 Replies
View Related
Aug 2, 2012
whats the difference between channel and parallelism in RMAN ?
What is the Oracle recommendation for RMAN channel allocation ? I have read some were that RMAN channel allocation must be 4 times of the Server CPU -1. Say for example if there are 2 cpu in the server, then the channel allocation would be 4 * 2 -1 = 7 ?
View 1 Replies
View Related
Jan 5, 2012
I trying to backup my database using RMAN for the first time.
using this command
RUN
{
DELETE NOPROMPT OBSOLETE;
CROSSCHECK BACKUP;
CROSSCHECK ARCHIVELOG ALL;
DELETE NOPROMPT EXPIRED BACKUP;
[Code] ......
i get this error message while running it.
Starting backup at 05-JAN-12
channel C1: starting datafile copy
input datafile fno=00004 name=/CDS/data/CDSC01.dbf
channel C2: starting datafile copy
input datafile fno=00002 name=/CDS/rbsg/undo_01.dbf
channel C3: starting datafile copy
[Code]...
View 3 Replies
View Related
Nov 15, 2011
while executing a clone script i got the below error : -
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/15/2011 20:07:34
RMAN-12010: automatic channel allocation initialization failed
RMAN-06758: DB_UNIQUE_NAME is not unique in the recovery catalog
Here i understand that RMAN couldn't find which SPFILE to use to restore the target DB.
How do i check for the DB_UNIQUE_NAME in recovery catalog?
The proposed solution that i found was Use the FOR DB_UNIQUE_NAME option to specify the name of the instance whose parameter file you want to restore. how to implement this in my clone script?
View 7 Replies
View Related
Mar 20, 2012
We would take backup regulary by RMAN(catalog). Last two days we could not take backup. Backup start but after take backup some datafile then rman does not do anything.
View 4 Replies
View Related
Mar 17, 2012
I have following query in Dataguard ..
If I want to take Rman archive log backup with delete input command , how the archive logs will be copied to standby database
For eg
I am taking archive backup as
RMAN>backup archivelog all delete input;
here consider few archives are not copied to standby database (due to nw issue) then how standby will receives these missing archives as those are deleted by rman backup at primary side.
I am not getting any document related to above query.
View 7 Replies
View Related
Dec 16, 2012
what is the meaning of 'SBT_TAPE' in the following command in RMAN? In the following command, does it refer to a tape drive, or a hard disk backup?
allocate channel t1 type 'SBT_TAPE' parms
'ENV=(NSR_SERVER=<a backup server server name>,NSR_CLIENT=<a oracle server>,NSR_DATA_VOLUME_POOL=ORACLE ARCHIVE LOG)';
View 1 Replies
View Related
May 12, 2013
I am running an RMAN backup copy of a 23 TB database.
I have configured my script to run:
ALLOCATE CHANNEL DISKXX DEVICE TYPE DISK FORMAT 'PATH' MAXPIECESIZE 300 G;
I have configured ABOVE for 100 channels, and now it hangs after 100 datafile copy..which is strange...
Is above parameter correct?
View 4 Replies
View Related
Feb 23, 2012
Backup for database has been working fine until today.
Today, about 1/3 of the way through the backup (large database), I got this...
RMAN-12005: error during channel cleanup
RMAN-10038: database session for channel sbt_4 terminated unexpectedly
...and the backup died.
Never seen before and the research I've done online has been less than useful. This database is an SAP/oracle db with brtools 7.20 (22) and is using the new parameter in its init.sap file, called "_rman_chan_failo = yes", to address disagreement between brtools and oracle about channel drops being ok if all datafiles backed up.
Nothing in the alert log at the time of this error.
View 4 Replies
View Related
Jul 1, 2013
I am facing an issue while rebuilding a DR (Physical Standby) site using RMAN.Rman is failing to restore all the datafiles to the stanby site.
There are 403 datafiles that should be restored among which after restoring 50-60 datafiles the channel is abruptly getting terminated.Please note this exercise is not new I have done this many times (once a year after a DR testing) and the same script is being used.The rcv file is as follows
/u03/oracle/admin/mpr/scripts/dataguard/configure_dr.rcv
connect auxiliary sys/XXXX@YYY
run {
duplicate target database for standby nofilenamecheck dorecover;
}
exit
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
configure_dr.rcv: END
[code]....
The trace file says "krso_proc_add: Detected dead process 13828326; subsuming V$MANAGED_STANDBY slot
INFO: krsr_rfs_atc: RFS processes are temporarily disallowed"
I have also started RMAN debug tracing and the trace is also scanned as it is huge.I have seen the following in the trace error 3015 signalled during compilation..I do not find any specific oracle error to check on .
The only change that happened is that the Primary production server has been moved to a new datacentre and after its move all the connections seems to be working fine.
View 3 Replies
View Related
Mar 26, 2012
I have run a standby clone that terminated with error due to few missing LV-s. I removed all LV-s for the clone, recreated them including the missing ones. I ran the clone again,but it skips the files that were successfuly duplicated in the previous clone request that failed. I need to be able to start the clone all over again, but RMAN does persistantly skip duplicating the datafiles that were successfuly processed in the first atempt.
How to ignore the RESUME option so that the clone process would start from the beginning? Where does RMAN keep the info about the successfuly duplicated datafiles in clone standby process? I have tried few RMAN tables , but no luck.
View 1 Replies
View Related
Jun 27, 2012
How i can manually allocate channel for my backups going to tape?
For disk backups i can do and it work...
RUN
{
ALLOCATE CHANNEL disk1 DEVICE TYPE DISK FORMAT 'J:dbname\%U';
restore database preview;
}
View 2 Replies
View Related
May 4, 2011
multiple disk failure, the database was open at the time.We have managed to recover the data from the disk and have put it on another disk.We have got a new server with oracle 9 running.
A blank database has been created.I have copied the control files and redo files onto the new server and left the datafiles , (.dbf,.ora) on a seperate external disk F drive (this is because the original database resided on F drive)I can mount the database , however when I try to open it I get the following
ORACLE instance started.
Total System Global Area 135338868 bytes
Fixed Size 453492 bytes
Variable Size 109051904 bytes
Database Buffers 25165824 bytes
Redo Buffers 667648 bytes
Database mounted.
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1: 'F:ORACLEORADATALCMPROSYSTEM01.DBF'
ORA-01207: file is more recent than controlfile - old controlfile
View 25 Replies
View Related
Oct 18, 2012
understanding rman scn based Backup Algorithm .. In SCN based backup do rman generate backup from archivelogs ???
View 1 Replies
View Related
Feb 14, 2012
I am admin of my actual server and I want to backup all databases for later use. For that this is my approach.
1 - List all databases on the system
2 - Apply the backup command to each database
View 2 Replies
View Related
Dec 28, 2011
How i can take manually backup of datafile..using OS command
View 1 Replies
View Related
Mar 8, 2013
Every Sunday in the month - Full Backup
RMAN > BACKUP DATABASE;
Rest of the days - Incremental Level 1 Backup.
RMAN> BACKUP INCREMENTAL LEVEL 1 DATABASE
Day of Month Backup Taken Backup Contents
1st Full Backup All files as of the 1st - Sunday
2nd Incremental #1 Files updates between the 1st and 2nd - Monday
3rd Incremental #2 Files updates between the 2nd and 3rd - Tuesday
4th Incremental #3 Files updates between the 3rd and 4th - Wednesday
5th Incremental #4 Files updates between the 4th and 5th - Thrusday
6th Incremental #6 Files updates between the 5th and 6th - Friday
7th Incremental #7 Files updates between the 6th and 7th - Saturday
8th Full Backup #8 Files updates from 1st,2nd to 7th - Sunday
9th Incremental #9 Files updates between the 8th and 9th _ Monday
10th Incremental #10Files updates between the 9th and 10th - Tuesday
11th Incremental #11 Files updates between the 10th and 11th - Wednesday
12th Incremental #12 Files updates between the 11th and 12th - Thrusday
13th Incremental #13 Files updates between the 12th and 13th - Friday
14th Incremental #14 Files updates between the 13th and 14th - Saturday
15th Full Backup CRASHES - NOT COMPLETED - Sunday
I would need to restore now from #8 ( full backup ) and #9 to #14 ( incremental backup )
Tell me the "restore command" to achieve the output?
View 6 Replies
View Related
Jan 26, 2012
I have a database for which I use RMAN for backup & recovery. The database is in archivelog mode. Online redo log files are multiplexed and I have more than one destinations for archive logs. If, due to a disk crash, all data files and redo log files are gone - and I have archive logs, one member of each redo log group and a full database backup available, I can recover till the last archived log. But I want to ask that what about the transactions which were not archived at the time of media failure? How can I recover committed transactions which were not archived at the time of crash, and I have a mirrored copy of log group which was current at the time of failure?
View 5 Replies
View Related
Jan 24, 2011
I have 2 seperate rman backup one backup is of only datafile ,spfile and controlfile which i am able to restore and recover without any problem say bkp1 taken at 10 am
other set of backup is of only archive log files of same day but later time than datafile backup say bkp2 taken at 8pm...if i restore and recover bkp1 and try to restore bkp2 it gives error datafile exist (possibly due to fact both backup have control file)
if i just restore bkp1 and try to restore bkp2 so that i can do one recover at time
it gives error datafile permission issue (possibly due to fact both backup have control file)
I want to restore database upto 8pm time how can i use both bkp1 and bkp2 to do it(restore datafiles and apply all archive logs on it)
View 17 Replies
View Related
Dec 27, 2011
I can successfully SET COMMAND ID inside an RMAN run block
CODErman <<EOF
connect target
connect catalog ....
CROSSCHECK BACKUP DEVICE TYPE DISK;
CROSSCHECK ARCHIVELOG ALL;
RUN {
[code]...
Can this be setup without a RUN block? I am running on 11.1.07 and 11.2.0.2
View 2 Replies
View Related
Sep 12, 2013
What the "change" RMAN command does? For example, what is the effect of following command:
change archivelog until time 'SYSDATE-7' delete
And what is the difference between following commands:
change archivelog all validate;change archivelog all crosscheck;change archivelog all;
I checked the following doc but could not find anything:[URL]I am using Oracle 10gR2 on RHEL 64-bit.
View 3 Replies
View Related
Feb 19, 2013
crosscheck backup of database vs crosscheck backup command
RMAN> crosscheck backup;
it shows all backup pieces.
RMAN> crosscheck backup of database;
it shows 2 backup piece of each backupset.
when should be use: crosscheck backup of database;
and when should be use: crosscheck backup;
View 8 Replies
View Related
Feb 26, 2012
We are doing RMAN Duplicate set until time to refresh daily our test database for our developers and it taking long time to finish. We noticed on the restore log that RMAN was using a day old old backup pieces to refresh the test database and don't immediately use the latest backup pieces instead.
For additional details here's the rman duplicate command we are using which we run daily(mon-sat) at 4am once daily full backup on production completed.
RMAN Duplicate commands:
run
{
set until time "to_date(to_char(sysdate,'Mon DD YYYY') || ' 04:00:00', 'Mon DD YYYY HH24:MI:SS')";
allocate auxiliary channel ch1 type disk;
duplicate target database to testdb;
}
exit
Is there a way on how to let RMAN use the latest backup pieces instead?
View 1 Replies
View Related
Dec 22, 2012
I created a tablespace named 'data'.During create a new user with default tablespace 'data',I got following error message:
SQL> create user rman identified by rman default tablespace data
temporary tablespace temp
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01655: unable to extend cluster SYS.C_USER# by 2 in tablespace
OS:Windows XP
Oracle 10g
View 2 Replies
View Related