We would like to deploy Oracle EBS R12 on HP Infrastructure.
how many servers do we need for Test and [b]Dev environments and what are the best practices for this deployment.
Note: we have >50 and <100 users.
I'm trying to install Grid Infrastructure for Oracle RAC 11g. I followed each step of pre installation tasks, but when I run run Installer it blocks without any error message.
What I see on my shell is this:
./runInstaller
Avvio di Oracle Universal Installer in corso...
Verifica dello spazio Temp: deve essere maggiore di 120 MB. Effettivi 17276 MB Superato
Verifica dello spazio di swap: deve essere maggiore di 150 MB. Effettivi 23999 MB Superato
Verifica del monitor: deve essere configurato per visualizzare almeno 256 colori. Effettivo 16777216 Superato
Preparazione per l'avvio di Oracle Universal Installer da /tmp/OraInstall2012-01-11_03-35-57AM. Attendere...[oracle@ssts2cora1 grid]$
Everything seems ok. But the window of oracle installation does not appear. The java process is active:
[oracle@ssts2cora1 grid]$ ps -ef | grep java
oracle 4553 1 0 03:35 pts/0 00:00:00 /tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java -Doracle.installer.library_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui/lib/linux -Doracle.installer.oui_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui -Doracle.installer.bootstrap=TRUE -Doracle.installer.startup_location=/home/software_ssts/grid/install -Doracle.installer.jre_loc=/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre -Doracle.installer.nlsEnabled="TRUE" -Doracle.installer.prereqConfigLoc= -Doracle.installer.unixVersion=2.6.32-100.34.1.el6uek.x86_64 -mx150m -cp
[code]....
but it does nothing!! Nothing appears to me. I attach the log file generated by the installation process.
Using paramFile: /home/software_ssts/grid/install/oraparam.ini
Checking Temp space: must be greater than 120 MB. Actual 17276 MB Passed
Checking swap space: must be greater than 150 MB. Actual 23999 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
The commandline for unzip:
/home/software_ssts/grid/install/unzip -qqqo ../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles/\*.jar -d /tmp/OraInstall2012-01-11_03-35-57AM
Verr� utilizzato il valore di umask '022' disponibile in oraparam.ini
Execvp of the child jre : the cmdline is /tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java, and the argv is
/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre/bin/java
-Doracle.installer.library_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui/lib/linux
-Doracle.installer.oui_loc=/tmp/OraInstall2012-01-11_03-35-57AM/oui
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location=/home/software_ssts/grid/install
-Doracle.installer.jre_loc=/tmp/OraInstall2012-01-11_03-35-57AM/jdk/jre
[code].......
I got huge problem trying to install grid infrastructure and oracle db. Separately oracle db works fine and installation is going without any problems as for grid not so much.
i got vmware host 4.1 with several vm's on top. One of them i openfiler which gives 2 luns for installation. Two other vm's are host of windows 2008r2(comes only 64bits i know that many of you know but just to be clear). Those two windows should be connected in oracle cluster and should have one oracle db afterwards. I have already AD domain, free disks and all required staff arranged and prepared.
I wont bodder you ppl about previous problems but current one is that i have no clue what's going wrong. I got two logs file which i paste below but there's no error message just some warning which isn't described even properly as for me.
Attached File(s)
installtion_logs.zip ( 66.62K )
Number of downloads: 0
I'm installing Oracle Grid 11gr2 on windows 2003 server. I installed successfully without domain controller. But when i try to install with Active Domain controller i faced following error
INS-20802 Grid Infrastructure Failed
Cause:Plugin failed
i am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.
*************************************
[root@bsfrac01 grid]# sh root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /u01/app/11.2/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ...
Copying oraenv to /usr/local/bin ...
Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created.Finished running generic part of root.sh script.Now product-specific root actions will be performed.
2011-02-13 00:11:55: Parsing the host name
2011-02-13 00:11:55: Checking for super user privileges
2011-02-13 00:11:55: User has super user privileges
[code]....
I have some confusions regarding to 11gR2 RAC installation:
- Is Grid Infrastructure only the solution to install Clusterware Application 11gR2? My requirement is to install only the Cluster ware Software for 11gR2 (For 11gR1 we have "linux.x64_11gR1_clusterware.zip") using ocfs2 file system, Archive Mode not enabled.
I am in process of installing Oracle 11g R2 Grid Infrastructure on 2-node virtual RAC. All went very well until the Grid Installation stuck on 65%. It is saying copying file on remote node ('Copying Oracle Home '/u01/app/11.2.0/grid' to remote nodes 'cxm-vl-rman02'). From the logs it is difficult to figure out where the bottlenecks lies.
View 2 Replies View RelatedI tried to install 11gR2 grid infrastructure for 2 nodes RAC using VMWare as per the instructions provided in the below link.
[URL]
Until 65% installation went fine without any issues but after reaching this step "updating '/u01/app/11.2.0/grid/install/cluster.ini",it starts to hung. In the installation log file, I found these details.
Quote:filename = /tmp/.GsdDisplayed
INFO: Query Returned: false
INFO: Calling Action fileActions10.2.0.6.0 appendStringToFile
source = /u01/app/11.2.0/grid/install/cluster.ini
stringToAppend = [cluster_info]
cluster_name=rac-scan
[code]....
When trying to install Oracle Grid Infrastructure on Virtual Box RHL 5.5 (2.6.18-194.el5 kernel) machine it gives error.
Quote:$ Xlib:connection to ":0.0" refered by server
Xlib:No protocol specified
Exception in thread "main" java.lan.NoClassDefFoundError
at java.lan.Class.forName0(Native Method)
..........at oracle.install.ivw.crs.driver.CRSInstaller.main(CRSIntaller.java:103)
i try to install oracle grid infrastructure 11r2 on cent OS 4.8 on vmware workstation 8.0.2..ASM disk is not showing ,i had also change disk discovery path to 'ORCL:*'i had already configure ASM disk using /etc/init.d/oracleasm createdisk...successfully..
View 8 Replies View RelatedI have requested the Infrastructure DBA to move a table with size 126GB(as shown in the stats/size tab in TOAD) from one tablespace to another.This is free the huge space in the first tablespace which i wanted to use for creating another table.
But when the table is moved to another tablespace, surprisingly for me, i saw that the sizeof the table has come down to 8 GB from 126 GB.Point to be noted is that everyday there are physical deletes happening on the table.
I am not seeing the software of Oracle 11gR2 grid infra structure for Windows. What is the link to download the grid infra structure for Windows.
View 3 Replies View RelatedWe have a two node 11.2.0.3 Grid Infra cluster running on SLES11 Linux. Everything is ok with the SCAN and standard listeners.
However we have a listener running on each node which is used by Oracle Gateway. These listeners were created manually using info provided by Oracle (i.e. definition copied to $ORACLE_HOME/network/admin/listener.ora and started using lsnrctl). This all works.
These listeners are currently not managed by Grid Infra. We would like them to be.
I thought this was easy enough using srvctl to register them with Grid Infra using...
srvctl add listener -n mynode1 -l LISTENER_MYNODE1_GW -o $ORACLE_HOME -p 1529
srvctl add listener -n mynode2 -l LISTENER_MYNODE2_GW -o $ORACLE_HOME -p 1529
These commands worked but did give a warning stating that the -n flag is deprecated and will be ignored.
This has left us with the following listener config....
grid@MYNODE1:~> srvctl status listener -n mynode1 | grep mynode
Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode1
Listener LISTENER_MYNODE1_GW is not running on node(s): mynode1
Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode1
Listener LISTENER_MYNODE2_GW is not running on node(s): mynode1
grid@MYNODE1:~> srvctl status listener -n mynode 2 | grep mynode
Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode2
Listener LISTENER_MYNODE1_GW is not running on node(s): mynode2
Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode2
Listener LISTENER_MYNODE2_GW is not running on node(s): mynode2
You can see that Grid Infra knows about the listeners but they are available on both nodes. What we would like is a result like the following example....
grid@MYNODE1:~> srvctl status listener -n mynode1 | grep mynode
Listener LISTENER_MYNODE1_GW is enabled on node(s): mynode1
Listener LISTENER_MYNODE1_GW is not running on node(s): mynode1
grid@MYNODE1:~> srvctl status listener -n mynode 2 | grep mynode
Listener LISTENER_MYNODE2_GW is enabled on node(s): mynode2
Listener LISTENER_MYNODE2_GW is not running on node(s): mynode2
i.e one listener registered with just the node it is running on. This used to be possible with using the -n flag but no longer works.
I am trying for 11gR2 3 node RAC ASM on windows 2003-64-bit. I am using one SCAN ip ,placed in /etc/hosts file.I am not using DNS/GNS. Same thing done(/etc/hosts) on other nodes also.
I have run the cluvfy.bat prior to grid software install and passed very well. When i tried to install Grid Software,at prerequisites i got error as "node connectivity".
Even i ignored this error and run the finish.After moving grid software to remote nodes ,it throws error as " [INS-20802] Grid Infrastructure Configuration failed ".
It specified one log,which i am attaching here. In network side ,the ping is ok to all the nodes.
Here i am attaching the error screen shots and error log file.
I have raised SR with Oracle ,but not able to identify the root cause of this problem.I will post the solution once i got from oracle.
I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...
./runcluvfy.sh stage -pre crsinst -n oradbprd016,oradbprd022 -fixup -verbose
These are the errors...
Check: TCP connectivity of subnet "192.168.99.0"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
c-oradb003av:192.168.99.32 oradbprd016:192.168.99.32 failed
ERROR:
PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd016 : 192.168.99.32" failed
c-oradb003av:192.168.99.32 oradbprd022:192.168.99.235 failed
ERROR:
PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd022 : 192.168.99.235" failed
Result: TCP connectivity check failed for subnet "192.168.99.0"
The physical hostnames of the servers are c-oradb003av and c-oradb005av In which they are aliases as follows in the /etc/hosts files.
# c-oradb003av
192.168.99.32 c-oradb003av.corppvt.com c-oradb003av
192.168.99.32 oradbprd016.corppvt.com oradbprd016
192.168.99.243 oradbvip016.corppvt.com oradbvip016
192.168.100.18 oradbpri016.corppvt.com oradbpri016
192.168.103.18 oradbrep016.corppvt.com oradbrep016
[code]....
it would say it is failing between the physical hostname and the alias which are using the same ip address?
PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd016 : 192.168.99.32" failed (it's the same address?)
I've noticed that the backup files produced by RMAN (Database is 11.2.0.2.0 Enterprise Edition) )on a RHEL5.5. server which is running ASM have group permissions assigned to ASMADMIN (so the file permissions are assigned to ORACLE:ASMADMIN) as opposed to OINSTALL or any other group.
While this is not an issue (it's not currently impacting us in any way) I'm curious as to how and why this happens. I suspect it is related to the fact that the oracle executable has these permissions also but I can't find any material to confirm my suspicion.
i have installed grid(crs+asm) on my two linux node(Enterprise linux 5) setup, using openfiler(SAN) , i have configure grid Home like ORACLE_ HOME=/ u01/ home/app/11.2.0/grid.
1) i don't get any instance specific asm parameter file like init+ASM1.ora instead of that i got ab_+ASM1.dat, hc_+ASM1.dat, init.ora, orapw+ASM four files, do i need to create ASM instance specific parameter manually to create diskgroup in the same location,
2) +DATA diskgroup has been created while grid installation, but when i try to create database, its giving me error diskgroup +DATA doesn't exit or not mount, but when i check it shows me mount like below $cd $ORACLE_HOME/dbs (here oracle home is grid home)$export ORACLE_SID=+ASM1$sqlplus / as sysdba>select name,state from v$asm_diskgroup; name state DATA Mounted even i cant able to dismount diskgroup DATA, it throws an error insufficient privilege.
3) After grid installation how can one create diskgroup i mean what needs to exported as ORACLE_SID like in 10g we have $export ORACLE_SID=+ASM1 then creat diskgroup.
GRID version: 11.2.0.3 , 11.2.0.2
Platform : AIX 6.1
We install grid using Grid Installer GUI. When doing a fresh installation of Grid Infrastructure 11.2.0.2 or 11.2.0.3 in a new server , I want to apply its latest PSU as well. When should I do this PSU patching ?
A. Should I apply the GI PSU after the entire Grid installation is successfully completed ?
or
B. Should I apply the GI PSU just before running the root.sh ?
i.e. when the installer prompts you to run root.sh (see the screenshot below)
[URL].........
At this stage(before running root.sh) the GI binaries are in place . So , I can apply the PSU on these binaries? Right?Should I follow option A or B above ?
I would like to use Oracle Grid Infrastructure to protect a single-instance database.
I found these docs:
[URL]
I was unable to find a similar document for GI 11.2 . Do you know if such a document exists?
At the moment I only know that the GI is free if used for an Oracle Product, but I am not shure whether it can be used to protext external applications or single-instance databases
How to configure Oracle EM with newly created Oracle Instance on Oracle 10g DB,which is Single Instance DB but not RAC ,when I start the Oracle EM it is starting the default DB which created during Oracle Server Installation.
View 0 Replies View RelatedBut i do a lot of work-arounds to make sure the installation does not make corrupt my OracleAgent,OracleService and OracleDataGatherer. If i just let the installation do its thing i have problems with my libraries, and can't start anything.
The errors are : Procedure entry point 'BlaBla' could not be located in the Dynamic Link library 'AnyName'.
I notice that i have 2 versions of the libraries in OracleHomeBIN (one version 8, one version 11). The programs that start the OracleAgent,Service and DataGatherer call the old libraries but expect to find values that can be found only in new libraries.
I have a requirement to put together a Oracle SQL template to create re-usable DDL/DML Scripts for Oracle databases.Only the Oracle DBA will be running the scripts so permissions is not an issue.
The workflow for any DDL is as follows:-
1) New Table
a. Check if the table exists from the system/admin views.
b. If table exists then give message "Table Exists"
c. If table does not exist then execute DDL code
2) Add Column
a. Check if Column exists for a given table from system/admin views
b. If column exists in the specified table,
b1. backup table.
b2. alter table to make changes to the column
b3. verify data or execute dml script convert from backup to the new change.
c. If Column does not exist
c1. backup table
c2. alter table to add column
c3. execute dml to populate column with default value.
The DML scripts are for populating base tables with data required for business operations.
3) Add new row
a. check if row exists by comparing old values of each column with new values to be added for the new record.
b. If exists, give message row exists
c. If not exists, add new record.
4) Update existing record (We have createtime columns in these tables so changes can be tracked)
a. check if row exists using primary key.
b. If exists,
b1. deactivate the record using the "active" column of the table
b2. Add new record with the changes required.
c. If does not exist, add new record with the changes required.
We would be moving oracle 11g unix sun solaries to oracle 11g Linux readhat OS. what would be the disadvantage and what are the item needs to be verified. Basically advantage of oracle 11g Linux readhat OS.
View 2 Replies View RelatedI would like to update an XML element without using the function APPENDCHILDXML or INSERTCHILDXML because they are not available in Oracle 10GR1.
In my database, Oracle XDB is not installed.
The following query fail with the following error : ORA-00904: "INSERTCHILDXML" : identificateur non valide
update scl_profile
set profile_data =
insertChildXML(profile_data,'/exportImportMarcheCriteria','colonnesExport',
XMLType('<colonnesExport>ENTETE_GESTIONNAIRES_AUTORISES</colonnesExport>'))
where profile_xmltype =
'fr.mipih.marches.marche.criteres.ExportImportMarcheCriteria'
and profile_type =
'eMagh2.MRGS.AccesMarche.ListeMarche.Export.OptionsExportImport';
[code]........
If i try to use the package DBMS_XMLDOM, i have the following error :
ORA-06550: Ligne 3, colonne 11 :
PLS-00201: l'identificateur 'DBMS_XMLDOM.DOMDOCUMENT' doit etre declare
ORA-06550: Ligne 3, colonne 11 :
PL/SQL: Item ignored
I think it's because ORACLE XDB component is not installed in my database.
This time i am downloading the Oracle 11g and then the Oracle APEX...(they are not in one package...right ? i mean they both have to download separately)i really new in oracle / PL/SQL. I'm not a programmer but i interest about database programming.For now i still use Ms. Access to develop an aplication and i really suprised i found this Oracle APEX because it an RAD tool too same as Access but more powerfull i think.
View 2 Replies View RelatedI am trying to connect to Oracle from another server that does not have any Oracle applications on it.
I tried Perl, PHP, Java but each require parts of Oracle installed.
I am working on an application which is on Oracle forms and Reports 6i.It connects to a database which is Oracle 9i. My client wants to upgrade the Database to Oracle 10gR2 or Oracle 11g. I searched in many forums and also saw in Interoperability table which says it is not compatible. But some users are using it fine.
View 1 Replies View RelatedCan I directly upgrade Oracle 9.2.0.1.0 From RHEL-4 platform to Oracle 11g Rel 2 on RHEL -5 platform?I have the export dump and cold backup of Oracle 9.2.0.1.0 database.
View 11 Replies View RelatedI am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedI have problems to log in to Oracle?What name should I use for log in?
View 1 Replies View Related