During installation of Oracle RAC 11g r1 on Linux using VMware server for Two Nodes, all the pre cluster installation test was successful, and execution of root.sh on node 1 was successful too, but whenever I run the root.sh script on the second node I get error message "Failure at final check of oracle CRS stack. 10"
View 3 RepliesA link which describe step by step with screen shots how can i install oracle 10 r2 on oracle linux server release 6.1 using vmware workshop 8.my actual os is windows server 64 bit in this in install vmware 8 and i install oracle linux server release 6.1 32 bit now i want to install oracle 10g r2 or oracle 11g r2 on this .
View 2 Replies View Related am trying to install rac 11gr2 config on linux 5.5 on vmware server.
following doc:
[URLs]...
but as in the first step VMware Server Installation:First, install the VMware Server software. On Linux you do this with the following command as the root user.
# rpm -Uvh VMware-server*.rpm
i couldn't find any where on linux disks.
my host os is win 7 ,,,,i install vm ware and install linux on vmware...now i want to ping linux from win 7...how i can do it... firwall is disable.
[root@lnxdb ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
#
Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
BOOTPROTO=none
HWADDR=00:0C:29:22:FC:FF
[code]...
i want to ping the guest os linux install on vmware to os win7 host ...how?
Looking to install oracle 10g in same server where i have installed already oracle 11g,
: i have looked at how to install oracle 11g and 10g on same linux server.but didn't quite get it ....
Is Oracle Failsafe 11G supported on VMWARE, we plan to create a cluster of two vm servers, is it a supported configuration?
View 4 Replies View RelatedRPMS needed by OCFS2 for oracle enterprice linux 6.2,Since we unable to mount through OCFS2 console.
View 1 Replies View RelatedI need to configure a watchdog (or any other) utility which will constantly monitor database health. And if something goes wrong with the database, the utility should restart the DB instance.
View 8 Replies View RelatedI have 9i RDBMS Software and RHEL 4. I want to install a Oracle Names server. I install RDBMS.But Where I run netmgr and want to configure and start Oname server it says.
$ORACLE_HOME/bin/names file not exists.
How Can I configure OracleNames Server using Oracle 9i On Linux.
I have Oracle 9i DB in windows 2003 server, I want to access this DB from Linux desktop. Is there any 'client software' is available to connect Or procedure to connect the DB.
View 0 Replies View Relatedjust now i installed oracle 10.2.0.1 client version in one my linux server. after successfully installation sqlplus is not working .
below are my .profile details.
# Set up the shell variables:
EDITOR=vi
export EDITOR
### Set the umask
umask 022
### Set ulimit
[code].....
I am trying to install Oracle 10g RAC clusterware on RHEL-ES-4 using vmware. everything works properly till the time root.sh on second node.
I am getting the below error.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
After googling this topic, I found I have to check this first below
This particular case is caused by the OS init system does not working.
" Failure at final check of Oracle CRS stack.10" means CRS daemon did not startup during 600 seconds period.In the root.sh script, it adds CRS related entry in /etc/inittab, run "init q" and expect 3 CRS related daemon processes to start, eg:
init.cssd
init.crsd
init.evmd
With init system problem, none of these daemon processes are spawned, this causes CRS process startup failure as they rely on the CRS daemon processes to start first.
This can be verified by adding a simple entry in /etc/inittab:
test:2:once:/usr/bin/echo "HELLO TEST" > /tmp/test.log
run "init q" as root user. If the init is working, then there should be a file /tmp/test.log generated.
According to above I am not able to generate this file.
We are having major differences in performance when accessing an Oracle 11gR2 database from two different environments.
I won't sadden you with the gory details of the full application but I will use an indicative example of our problem.
We have SQL Developer in both environments. In each of these SQL Developer instances is a defined a connection to the same database on another machine. So there is the PC looking at a database and a virtual instance looking at the same database.
Selecting the '+' sign next to 'tables' for that connection, on the PC the list of four tables comes back in 4 seconds but on the virtual instance the list of the same four tables comes back in 1 minute and 50 seconds.
This sort of timing issue is repeatable for all accesses to the Oracle database on the third machine.
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
We would be moving oracle 11g unix sun solaries to oracle 11g Linux readhat OS. what would be the disadvantage and what are the item needs to be verified. Basically advantage of oracle 11g Linux readhat OS.
View 2 Replies View Relatedwhile using top command it shows multiple processes usage.Actually we have 3 databases in the same server.how to find out which database process and user session hogging the cpu resources
View 2 Replies View RelatedEvery time when i open terminal, I have to set ORAENV variable in linux. I tried to find out .bash_profile but i can't find where it resides.
View 11 Replies View RelatedWhat I wanted to know was the steps to place a RAC cluster onto a brand new Linux server.
Step 1 - Install Cluster Software , CRS & Voting Disks
Step 2 - VIPCA - VIP Config (VIP, GSD, ONS) Resouce Apps
Step 3 - Create ASM Instance
Step 4 - Install Grid Infrastructure
Step 5 - Install RAC
Step 6 - Create Cluster DB - using DBCA with Enterprise Manager
This will be a 2 node RAC cluster going onto a Redhat 5 Linux box
Provide me the link for the download of AIX 32 bit operating system ISO file as I need this for VMWARE. I have searched the IBM sites for this but to no avail.
View 1 Replies View Related have 2 Oracle server. One with Suse Linux (Oracle 10.2.0.4.0) and one with Windows 2003 Server x64 (Oracle 11.2.0.1.0).
I made a mistake by installing Oracle 11 x32 on a x64 server. Nevertheless it works for about half a year. Then my backups
with datapump don't work. I changed the SGA_TARGET down to 1024M and the datapump works again. Now I want to renew the Windows server and want to import the datapump schemes to the Linux server.
Exp: expdp SCHEMA1/****@db1 DIRECTORY=dmpdir DUMPFILE=SCHEMA1_EXPDAT.DMP LOGFILE=SCHEMA1_EXP.LOG VERSION=10.2.0.3 REUSE_DUMPFILES=YES
Imp: impdp SCHEMA1/**** DIRECTORY=dmpdir DUMPFILE=SCHEMA1_EXPDAT.DMP LOGFILE=SCHEMA1_IMP.LOG
Log:
..importing SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
..importing SCHEMA_EXPORT/SEQUENCE/SEQUENCE
[code]...
Im trying to use sqlldr in Fedora Linux but it doesnt work
The message:
Message 2100 not found; No message file for product=RDBMS, facility=ULMessage 2100 not found; No message file for product=RDBMS
oracle.sh:
export ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin
export LD_LIBRARY_PATH=/usr/lib/oracle/11.2/client/lib:/usr/include/oracle/11.2/client:/usr/share/oracle/11.2/client
export ORACLE_SID=zxin
export PATH=$PATH:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin
I wanted to practice dataguard in oracle. I feel that I can practice realistically if I have 2 different servers to do switchovers, building new physical standby database from scratch and shipping the archiving logs from primary to physical standby database, etc., Can I use VMWare software to install 2 different servers and then practice dataguard?
View 1 Replies View RelatedCan I use 64 bit OS (Solaris x86) in my PC with VMware. As many software available in 64 bit but not in 32bit.
If I install 64 bit OS , Oracle DB whether it can crash the system or not
I am unable to configure EM(Oracle 11.2g) on Redhat Linux 5 Enterprise edition(32 bit). Environment variables are set to correct SID. If I try to run dbca the wizard does not display the Enterprise manager configuration screen. I have tried to create repository by using emca -config dbcontrol -db config.
But it throws exception that database instance is unavailable?
how to install oracle on Linux.
View 2 Replies View RelatedSQL>startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/db_1/dbs/initora11g.ora'
Unfortunately I can not find initora11g.ora
[oracle@localhost db_1] cd dbs
[oracle@localhost dbs] ls
hc_orcl.dat init.ora lkORCL orapworcl spfileorcl.ora
so create pfile from spfile='/home//oracle/product/11.2.0/db_1/dbs/spfileora11.ora will not work
[oracle@localhost dbs]$ ls
hc_orcl.dat init.ora lkORCL orapworcl spfileorcl.ora
I don't see initora11g.ora file - as shown above in oratab also - it showed sid as orcl but I changed into
I have set oracle_sid = ora11g in .bash_profile as well
share with me a linnk of oracle 11g client on RHEL 5 32 bit due to i search in oracle web site and found only 64 bit URL.....share with me a link of installation guide of this client?
View 4 Replies View Relatedlink where can i get oracle 9i for Linux OS??Is 9i available for 64 bit ?
View 4 Replies View RelatedI have installed oracle enterprise linux 6.2 on my laptop, and I installed the database 11gR2 on it, know the user account I used to log in with (os level) is not accessible any more :
[URL].........
if I remove the account and recreate it does it will cause problems to the database?
how to start OEM 12c agent on Linux server ?
Note:Its a RAC server .