Server Administration :: Installation Steps For Oracle 10g 10.2 On Linux 6 Using Vmware
Mar 16, 2012
A link which describe step by step with screen shots how can i install oracle 10 r2 on oracle linux server release 6.1 using vmware workshop 8.my actual os is windows server 64 bit in this in install vmware 8 and i install oracle linux server release 6.1 32 bit now i want to install oracle 10g r2 or oracle 11g r2 on this .
View 2 Replies
ADVERTISEMENT
Feb 3, 2013
am trying to install rac 11gr2 config on linux 5.5 on vmware server.
following doc:
[URLs]...
but as in the first step VMware Server Installation:First, install the VMware Server software. On Linux you do this with the following command as the root user.
# rpm -Uvh VMware-server*.rpm
i couldn't find any where on linux disks.
View 2 Replies
View Related
Jan 16, 2011
I have installed grid and oracle 11g on linux environment. I want to installation January patch related to grid and oracle 11g. This is the first time i m going to install the oracle 11g.
View 4 Replies
View Related
Sep 12, 2012
my host os is win 7 ,,,,i install vm ware and install linux on vmware...now i want to ping linux from win 7...how i can do it... firwall is disable.
[root@lnxdb ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
#
Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
BOOTPROTO=none
HWADDR=00:0C:29:22:FC:FF
[code]...
i want to ping the guest os linux install on vmware to os win7 host ...how?
View -1 Replies
View Related
Jun 15, 2011
During installation of Oracle RAC 11g r1 on Linux using VMware server for Two Nodes, all the pre cluster installation test was successful, and execution of root.sh on node 1 was successful too, but whenever I run the root.sh script on the second node I get error message "Failure at final check of oracle CRS stack. 10"
View 3 Replies
View Related
Aug 28, 2013
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
View 15 Replies
View Related
Oct 3, 2012
The steps for the subject line mentioned. and pre-reqs or post-checks if any.
View 3 Replies
View Related
Oct 11, 2012
just now i installed oracle 10.2.0.1 client version in one my linux server. after successfully installation sqlplus is not working .
below are my .profile details.
# Set up the shell variables:
EDITOR=vi
export EDITOR
### Set the umask
umask 022
### Set ulimit
[code].....
View 4 Replies
View Related
Mar 29, 2013
RPMS needed by OCFS2 for oracle enterprice linux 6.2,Since we unable to mount through OCFS2 console.
View 1 Replies
View Related
Jan 28, 2011
I need to configure a watchdog (or any other) utility which will constantly monitor database health. And if something goes wrong with the database, the utility should restart the DB instance.
View 8 Replies
View Related
Jun 24, 2013
Provide me the link for the download of AIX 32 bit operating system ISO file as I need this for VMWARE. I have searched the IBM sites for this but to no avail.
View 1 Replies
View Related
Jul 25, 2012
SQL>startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/db_1/dbs/initora11g.ora'
Unfortunately I can not find initora11g.ora
[oracle@localhost db_1] cd dbs
[oracle@localhost dbs] ls
hc_orcl.dat init.ora lkORCL orapworcl spfileorcl.ora
so create pfile from spfile='/home//oracle/product/11.2.0/db_1/dbs/spfileora11.ora will not work
[oracle@localhost dbs]$ ls
hc_orcl.dat init.ora lkORCL orapworcl spfileorcl.ora
I don't see initora11g.ora file - as shown above in oratab also - it showed sid as orcl but I changed into
I have set oracle_sid = ora11g in .bash_profile as well
View 1 Replies
View Related
Mar 22, 2013
Can I use 64 bit OS (Solaris x86) in my PC with VMware. As many software available in 64 bit but not in 32bit.
If I install 64 bit OS , Oracle DB whether it can crash the system or not
View 4 Replies
View Related
Apr 19, 2011
I want to install Oracle 11g R2 in windows 2008 64 bit server. How can I know whether my server is ready to install Oracle ie is all components are available in server or any patch is to be applied etc.
View 3 Replies
View Related
Jan 16, 2013
I have a single node Oracle E-Biz 12.1.3 Installation.We plan to convert this to a dual node RAC install and I wanted to run by the steps to perform this AND clone over the current production system to the new RAC system (note this will not be using ASM - but will be based on NetApp NFS)
1. Install GRID 11.2.0.3
- installed acorss two nodes, Binaries can be shared
- voting disks / cluster rigistry MUST be shared
2. Install Database Software for RAC
- Binaries cannot be shared and must be installed on each node independently
3. Configure the GRID for database (database / listeners)
4. Clone over the stand alone system (clone database as RAC)
I will be using SCAN - and therefore would expect all the web services / concurrent manager nodes to point to the SCAN hostname as opposed to individual host names.
View 1 Replies
View Related
Apr 22, 2010
I am trying to install oracle 11g on windows 2003 ent with sp2 , where I am getting an error, The java runtime environment was not found at bin/javaw.exe. hence the oracle universal installer cannot be run.
View 4 Replies
View Related
Nov 4, 2010
I want to install Oracle software 10g R2 at linux platform. I want to install it at Silent mode, but not able to find the .rsp(response) file. I have created the .rsp(response file) from oui , hut not able to configure the same.
View 1 Replies
View Related
Jun 20, 2010
I want to install the partitioning option in my oracle database. I have the license. When i run the installer and select the partitioning option, the installation begins from beginning overwriting my old setup files. How can i avoid this and only install partitioning.
View 2 Replies
View Related
Jan 31, 2011
I am using Oracle 11g (11.2.0.1.0) and I want to apply January patch on 11.2.0.1.0. I have applied 3 patches. I have single Instance with ASM and Grid.
Grid home: /opt/grid/11.2.0/grid
Oracle Home: /opt/oracle/product/11.2.0/db
1. O patch (6880880)
2. Grid patch (9655006)
3. Oracle Patch (10248516)
I have followed the following steps.
1. Applied Opatch on grid.
unzip p6880880_112000_LINUX.zip -d /opt/grid/11.2.0/grid
2. Validated the Oracle Inventory.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory -detail -oh /opt/grid/11.2.0/grid
3. Shut down the databases.
4. Run the prepatch script
./9655006/custom/server/9655006/custom/scripts/prepatch.sh
5. Shutdown the ASM.
6. Ran the below command to stop CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -unlock
7. Applied grid patch.
/opt/grid/11.2.0/grid/OPatch/opatch napply -oh /opt/grid/11.2.0/grid -id 9655006
8. Applied Opatch on Oracle home
9. Applied Oracle patch
/opt/oracle/product/11.2.0/db/OPatch/opatch napply -oh /opt/oracle/product/11.2.0/db -id 10248516
8. Run the postpatch script
./9655006/custom/server/9655006/custom/scripts/postpatch.sh
9. Run the following script to enable CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -patch
/opt/grid/11.2.0/grid/bin/crsctl check has
/opt/grid/11.2.0/grid/bin/crsctl check css
10. If CSS is not online ran the below command.
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.cssd" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.diskmon" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl stop has
/opt/grid/11.2.0/grid/bin/crsctl start has
11. Up the ASM and Databases. Ran the postinstall in GRID and Oracle.
@catbundle.sql psu apply
12. Ran the below command on grid and Oracle.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory
/opt/oracle/product/11.2.0/db/OPatch/opatch lsinventory
1. Let me know steps which are followed are right because I didnot see the version change after connecting to database? (for example 11.2.0.1.0 after applying I can see 11.2.0.1.4 but not changed the version). How should I know the patch is applied properly?
2. Is the above steps are applicable to HA setup.
View 7 Replies
View Related
Sep 19, 2013
What are the free linux OS's that are suited for running Oracle 11g smoothly?
View 17 Replies
View Related
Apr 22, 2011
When Oracle was installed, there was an error in the server's domain name (missing a "."). Is there an easy way to fix this domain name in the Oracle installation after the fact? I know about tnsnames.ora, pfile, system parameters, and I'm pretty sure I can do emagent -config. My concern is that the "Installed Products" would not like the fact that the domain name is now "abc.proj.org" when installation was done on "abcproj.org". The /etc/hosts file had "abcproj.org", and we want to fix it to "abc.proj.org".
I need to reinstall Oracle -- is there a better way?
View 3 Replies
View Related
Nov 17, 2011
Yesterday i installed oracle 11g r2 by default i installed database Oracle with the installation .but today i tried to create the database with the name green tat also completed successfully..the problem is in startup
export oracle_sid=green
sqlplus '/ as sysdba'
startup
database mounted
select instance_name from v$instance; But it SHowing the instance name as Oracle...i tried with the other method also
export oracle_sid=green
sqlplus /nolog
conn sys/b123 as sysdba
database mounted
select instance_name from V$parameter;
and it shows instance name as green..i tried to see the datafile location for green database
select file_name from dba_data_files; it shows the orcl datafile locations.
View 6 Replies
View Related
Jan 4, 2011
Im trying to install oracle 11g release 2(11.2.0.1.0) on oracle solaris 10(x86-64) on vmware on my laptop and my host OS is vista home basic ...
i successfully installed solaris on vmware but while im trying install 11g on it,its show .oui:syntax error at line 1: '|' unexpected.
i follow oracle documentation as well as OFA...
View 3 Replies
View Related
Jan 4, 2013
I have installed Oracle virtual box on windows host and have created Oracle Linux virtual machine as guest. I have installed the database server on my host machine but rest of the things(Peoplesoft peopletools etc....) on Oracle Linux guest.Now, I am trying to installed database client on guest machine which is Linux so that I can connect to DB server running on host, but having difficulties in doing so.
, I am following the installation instruction given in the doc docs.oracle.com/cd/E11882_01/install.112/e24322.pdf, but when I finally run command runInstaller.sh doesn't happen anything.Actually, to install other software's I just double clicked the .sh file and it automatically started the installation process on a terminal window but when I clicked runInstaller.sh to install DB client, it didn't do anything.
Also, when I run the same command runInstaller.sh from command line after navigating to the directory where this file is present, It throws me error saying "no command found".By the way, why the steps given in doc are so complex, I wish If I could just double click runInstaller.sh just like others and it start the installation process.
View 22 Replies
View Related
Oct 19, 2013
Before I install the Oracle database 11.2.0.1 in Linux server 2.6.39-400.209.1.el6uek.x86_64, I created the following groups
oinstall, dba, oper, and asmadmin. groupadd oinstall # required from training groupadd dba # required from training groupadd oper # and group asmdba, asmoper from training groupadd asmadmin #
optional from training I made a mistake when I created Oracle user account. I created it with dba as initial group“ useradd -g dba -G oinstall,oper,asmadmin oracle”, instead of “useradd -g oinstall -G dba,oper,asmadmin oracle” After all I installed Oracle database, now I have concerns and questions. Should I use user mod to update the Oracle user account to install as initial group or just leave it alone? If I now do “usermod –g oinstall –G dba,oper,asmadmin oracle”, will it break anything, any impact to the database?
View 10 Replies
View Related
Nov 19, 2011
RAC installation on vmware is failing with following errors. I followed below link for installation. URL..... Found the following errors:
[root@rac2 ~]# cd /crs/oracle/bin/
[root@rac2 bin]# ./vipca
PRKR-1062 : Failed to find configuration for node rac1
PRKR-1062 : Failed to find configuration for node rac1
[code]....
The "/crs/oracle/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.The "/crs/ oracle/cfgtoollogs/configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
[root@rac2 bin]# /crs/oracle/bin/racgons add_config rac1.localdomain:6200 rac2.localdomain:6200
[root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect
PRIF-10: failed to initialize the cluster registry
[root@rac2 bin]# /crs/oracle/bin/oifcfg setif -global eth0/192.168.2.0:public eth1/192.168.0.0:cluster_interconnect
PRIF-10: failed to initialize the cluster registry
View 8 Replies
View Related
May 11, 2010
I am trying to install Oracle 11g Release 2 on Redhat Enterprise Linux 5.2 (vmware image) but after 50% installation it through errors while copying files on the server. I also tried on Windows 2003 Server R2 (physical m/c as well as vmware image) and faced same problems. I did installation of Oracle 11g Release 1 and didn't find any problems.
View 15 Replies
View Related
Apr 15, 2012
I want to install Oracle EE 11gR2 on my Windows 7 Professional 64-bit laptop. Installed memory is 8GB.I need to install 32-bit server since Oracle Warehouse Builder will not run on a 64-bit o/s. Further, I use Toad 9.7.2 which will only recognise client 32-bit.
I had a few failed attempts, especially when the database was being created with the ORA-12560: TNS:protocol adapter error,
So here's what I did:
Changed C:WindowsSystem32driversetchosts so that it contains two lines 127.0.0.1 localhost & ::1 localhost
Changed properties of setup.exe in the installation directory to be Windows XP SP2 compatible and run as administrator
Selected "install database software only" (so I could figure out at what step the installation fails)
Selected "single instance"
Selected "Enterprise Edition"
Selected oracle base "c:app" (instead of default location c:appd_seng)
Copy of files was completed successfully, log file was created in c:program files(x86)oracleinventorylogs & registry entries were added to "HKEY_LOCAL_MACHINESOFTWAREWow6432NodeORACLE" (with keys KEY_OraDb11g_home1, ODP.NET & OracleMTSRecoveryService), and the following services were created:
OracleMTSRecoveryService: Started/Automatic
OracleOraDb11g_home1ClrAgent: Not started/Manual
OracleRemExecService: Started/Disabled
There are no listener.ora & tnsnames.ora yet. Sqlnet.ora is created with the line SQLNET.AUTHENTICATION_SERVICES = (NTS)
Now I went to Start, All Programs, Oracle - OraDb11g_home1, Configuration and Migration Tools, right clicked on "Net Configuration Assistant" and changed the properties to be Windows XP SP2 compatible and run as administrator and ran it. I selected "Listener Configuration", added a listener called LISTENER, TCP protocol, port 1521 and finished. A service called "OracleOraDb11g_home1TNSListener" was created and started in automatic mode. The PATH was updated and listener.ora was created with the lines:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:appproduct11.2.0dbhome_1)
[code]...
Tnsnames.ora is also creaed with the contents:
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
At the command prompt, lsnrctl.status shows:
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 15-APR-2012 12:42
:19
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DSG-HP6555b)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 15-APR-2012 12:37:54
[code]...
At the command prompt, lsnrctl.services shows: LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 15-APR-2012 12:43:15
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DSG-HP6555b)(PORT=1521))
)
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully Now I went to start, all programs, Oracle - OraDb11g_home1, Configuration and Migration Tools, right clicked on "Database Configuration Assistant" and changed the properties to be Windows XP SP2 compatible and run as administrator and ran it.
I chose to create a databaseGeneral purpose Global database name ORCL SID ORCL Chose "Configure Enterprise Manager" & "Configure Database Control for local management" and disabled "Automatic maintenance tasks" Used the same password for all accounts
Selected storage type "File System" & "Use Database File Locations from Template" Unchecked Flash Recovery & Archiving Selected "Sample Schemas", "Typical" memory size (1228MB), "Use Automatic Memory Management" Left sizing/character sets/connection mode as default, and Selected "Generate Database Creation Scripts" in C:appadminORCLscripts (if I choose to Create Database, it fails with TNS Protocol Adapter Error).
I now open ORCL.bat in an editor, go to command prompt, create the directories as per the file, set ORACLE_SID=ORCL & path.
Running C:appproduct11.2.0dbhome_1inoradim.exe -new -sid ORCL -startmode manual -spfile gives a message "instance created" & services "OracleJobSchedulerORCL", "OracleVssWriterORCL" (started) & "OracleServiceORCL" (started) are created.
The next step C:appproduct11.2.0dbhome_1inoradim.exe -edit -sid ORCL -startmode auto -srvcstart system give an error "Unable to start service, OS Error 1056" (probably implies services already running), nothing is present in the windows alert logs about this. If I stop the service OracleVssWriterORCL, then this command completes, although no messages are returned.
The next step in the batch file starts sqplus /nolog and calls ORCL.sql.
ORCL.sql accepts passwords for sys, system, sysman & dbsnmp. It then executes host C:appproduct11.2.0dbhome_1inorapwd.exe file=C:appproduct11.2.0dbhome_1databasePWDORCL.ora force=y, which prompts me for the password for sys.
ORCL.sql then calls CloneRmanRestore.sql, which then tries to run connect "SYS"/"&&sysPassword" as SYSDBA
This is when I get the error ORA-12560: TNS:protocol adapter error, which has been haunting me for days.
My gut feel is that the database creation step at sqlplus is unable to recognise the listener...or probably it does not recognise the modified registry location (with Wow6432Node), the file oracle.key in C:appproduct11.2.0dbhome_1BIN shows the string SOFTWAREORACLEKEY_OraDb11g_home1.
I then changed oracle.key to point to SOFTWAREWow6432NodeORACLEKEY_OraDb11g_home1, restarted the listener and ORCL service, but connecting as sys returns the same error.
View 30 Replies
View Related
Oct 3, 2007
Every time when i open terminal, I have to set ORAENV variable in linux. I tried to find out .bash_profile but i can't find where it resides.
View 11 Replies
View Related
Oct 1, 2010
I am testing upgrade from 11.1.0.6 to 11.2.0.2 patchset on linux X86-64 version. And facing the following component related issue.
The following components cannot be upgraded as the corresponding upgrade scripts are missing:
OLAP Analytic Workspace ( /u01/app/oracle/product/11.2.0/dbhome_3/olap/admin/apsdbmig.sql )
OLAP Catalog ( /u01/app/oracle/product/11.2.0/dbhome_3/olap/admin/amddbmig.sql )
Spatial ( /u01/app/oracle/product/11.2.0/dbhome_3/md/admin/sdodbmig.sql )
Oracle OLAP API ( /u01/app/oracle/product/11.2.0/dbhome_3/olap/admin/xoqdbmig.sql )
If you want to upgrade these components, you must first install them, using the OUI, and then re-run the Upgrade Assistant. Do you want to continue with upgrade? Note: If you continue, the above components will not be considered as part of the upgrade process.*
Following is the status of the specified components from 11.1.0.6
COMP_ID COMP_NAME VERSION STATUS
AMD OLAP Catalog 11.1.0.6.0 VALID
SDO Spatial 11.1.0.6.0 VALID
APS OLAP Analytic Workspace 11.1.0.6.0 VALID
Should I install these components while installing 11.2.0.2 patchset prior upgrading? I was unable to find any component installation on OUI.
Also DBUA pre-upgrade asked to remove existing UltraSearch from 11.1.0.6 prior upgrading. Though I removed it, but not sure is that going to hamper the upgraded DB, as I'm not sure of the usage of this component as well.
View 7 Replies
View Related