I am trying to install Oracle 11g Release 2 on Redhat Enterprise Linux 5.2 (vmware image) but after 50% installation it through errors while copying files on the server. I also tried on Windows 2003 Server R2 (physical m/c as well as vmware image) and faced same problems. I did installation of Oracle 11g Release 1 and didn't find any problems.
View 15 RepliesI am trying to install oracle 11g on windows 2003 ent with sp2 , where I am getting an error, The java runtime environment was not found at bin/javaw.exe. hence the oracle universal installer cannot be run.
View 4 Replies View RelatedWhen Oracle was installed, there was an error in the server's domain name (missing a "."). Is there an easy way to fix this domain name in the Oracle installation after the fact? I know about tnsnames.ora, pfile, system parameters, and I'm pretty sure I can do emagent -config. My concern is that the "Installed Products" would not like the fact that the domain name is now "abc.proj.org" when installation was done on "abcproj.org". The /etc/hosts file had "abcproj.org", and we want to fix it to "abc.proj.org".
I need to reinstall Oracle -- is there a better way?
I am restoring Oracle rman backup from nodeA to nodeB through RMAN and I was in the middle of the process of rename the redo log files to new location where I suddenly got the below mentioned error:
RMAN> SQL "alter database rename file 'E:oracleproduct10.2.0oradatadbadeepakREDO01.LOG' to 'E: est_rman estrmanREDO01.LOG'";
sql statement: alter database rename file 'E:oracleproduct10.2.0oradatadbadeepakREDO01.LOG' to 'E: est_rman estrmanREDO01.LOG'
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 01/31/2011 12:53:04
[code]....
I want to install Oracle 11g R2 in windows 2008 64 bit server. How can I know whether my server is ready to install Oracle ie is all components are available in server or any patch is to be applied etc.
View 3 Replies View RelatedI have downloaded and install oracle server6 and followed the
[URL].......
but i am getting error as follows
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 42983 MB Passed
Checking swap space: must be greater than 150 MB. Actual 7951 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation, Continue? (y/n) [n] n
User Selected: No
I have tried
#export DISPLAY=localhost:0.0
#export DISPLAY=localhost:0.0
xhost: unable to open display "localhost:0.0"
I want to install Oracle software 10g R2 at linux platform. I want to install it at Silent mode, but not able to find the .rsp(response) file. I have created the .rsp(response file) from oui , hut not able to configure the same.
View 1 Replies View RelatedI want to install the partitioning option in my oracle database. I have the license. When i run the installer and select the partitioning option, the installation begins from beginning overwriting my old setup files. How can i avoid this and only install partitioning.
View 2 Replies View RelatedI am using Oracle 11g (11.2.0.1.0) and I want to apply January patch on 11.2.0.1.0. I have applied 3 patches. I have single Instance with ASM and Grid.
Grid home: /opt/grid/11.2.0/grid
Oracle Home: /opt/oracle/product/11.2.0/db
1. O patch (6880880)
2. Grid patch (9655006)
3. Oracle Patch (10248516)
I have followed the following steps.
1. Applied Opatch on grid.
unzip p6880880_112000_LINUX.zip -d /opt/grid/11.2.0/grid
2. Validated the Oracle Inventory.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory -detail -oh /opt/grid/11.2.0/grid
3. Shut down the databases.
4. Run the prepatch script
./9655006/custom/server/9655006/custom/scripts/prepatch.sh
5. Shutdown the ASM.
6. Ran the below command to stop CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -unlock
7. Applied grid patch.
/opt/grid/11.2.0/grid/OPatch/opatch napply -oh /opt/grid/11.2.0/grid -id 9655006
8. Applied Opatch on Oracle home
9. Applied Oracle patch
/opt/oracle/product/11.2.0/db/OPatch/opatch napply -oh /opt/oracle/product/11.2.0/db -id 10248516
8. Run the postpatch script
./9655006/custom/server/9655006/custom/scripts/postpatch.sh
9. Run the following script to enable CSS etc.
/opt/grid/11.2.0/grid/crs/install/roothas.pl -patch
/opt/grid/11.2.0/grid/bin/crsctl check has
/opt/grid/11.2.0/grid/bin/crsctl check css
10. If CSS is not online ran the below command.
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.cssd" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl modify resource "ora.diskmon" -attr "AUTO_START=1"
/opt/grid/11.2.0/grid/bin/crsctl stop has
/opt/grid/11.2.0/grid/bin/crsctl start has
11. Up the ASM and Databases. Ran the postinstall in GRID and Oracle.
@catbundle.sql psu apply
12. Ran the below command on grid and Oracle.
/opt/grid/11.2.0/grid/OPatch/opatch lsinventory
/opt/oracle/product/11.2.0/db/OPatch/opatch lsinventory
1. Let me know steps which are followed are right because I didnot see the version change after connecting to database? (for example 11.2.0.1.0 after applying I can see 11.2.0.1.4 but not changed the version). How should I know the patch is applied properly?
2. Is the above steps are applicable to HA setup.
I have installed grid and oracle 11g on linux environment. I want to installation January patch related to grid and oracle 11g. This is the first time i m going to install the oracle 11g.
View 4 Replies View RelatedYesterday i installed oracle 11g r2 by default i installed database Oracle with the installation .but today i tried to create the database with the name green tat also completed successfully..the problem is in startup
export oracle_sid=green
sqlplus '/ as sysdba'
startup
database mounted
select instance_name from v$instance; But it SHowing the instance name as Oracle...i tried with the other method also
export oracle_sid=green
sqlplus /nolog
conn sys/b123 as sysdba
database mounted
select instance_name from V$parameter;
and it shows instance name as green..i tried to see the datafile location for green database
select file_name from dba_data_files; it shows the orcl datafile locations.
Im trying to install oracle 11g release 2(11.2.0.1.0) on oracle solaris 10(x86-64) on vmware on my laptop and my host OS is vista home basic ...
i successfully installed solaris on vmware but while im trying install 11g on it,its show .oui:syntax error at line 1: '|' unexpected.
i follow oracle documentation as well as OFA...
A link which describe step by step with screen shots how can i install oracle 10 r2 on oracle linux server release 6.1 using vmware workshop 8.my actual os is windows server 64 bit in this in install vmware 8 and i install oracle linux server release 6.1 32 bit now i want to install oracle 10g r2 or oracle 11g r2 on this .
View 2 Replies View RelatedI want to install Oracle EE 11gR2 on my Windows 7 Professional 64-bit laptop. Installed memory is 8GB.I need to install 32-bit server since Oracle Warehouse Builder will not run on a 64-bit o/s. Further, I use Toad 9.7.2 which will only recognise client 32-bit.
I had a few failed attempts, especially when the database was being created with the ORA-12560: TNS:protocol adapter error,
So here's what I did:
Changed C:WindowsSystem32driversetchosts so that it contains two lines 127.0.0.1 localhost & ::1 localhost
Changed properties of setup.exe in the installation directory to be Windows XP SP2 compatible and run as administrator
Selected "install database software only" (so I could figure out at what step the installation fails)
Selected "single instance"
Selected "Enterprise Edition"
Selected oracle base "c:app" (instead of default location c:appd_seng)
Copy of files was completed successfully, log file was created in c:program files(x86)oracleinventorylogs & registry entries were added to "HKEY_LOCAL_MACHINESOFTWAREWow6432NodeORACLE" (with keys KEY_OraDb11g_home1, ODP.NET & OracleMTSRecoveryService), and the following services were created:
OracleMTSRecoveryService: Started/Automatic
OracleOraDb11g_home1ClrAgent: Not started/Manual
OracleRemExecService: Started/Disabled
There are no listener.ora & tnsnames.ora yet. Sqlnet.ora is created with the line SQLNET.AUTHENTICATION_SERVICES = (NTS)
Now I went to Start, All Programs, Oracle - OraDb11g_home1, Configuration and Migration Tools, right clicked on "Net Configuration Assistant" and changed the properties to be Windows XP SP2 compatible and run as administrator and ran it. I selected "Listener Configuration", added a listener called LISTENER, TCP protocol, port 1521 and finished. A service called "OracleOraDb11g_home1TNSListener" was created and started in automatic mode. The PATH was updated and listener.ora was created with the lines:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:appproduct11.2.0dbhome_1)
[code]...
Tnsnames.ora is also creaed with the contents:
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
At the command prompt, lsnrctl.status shows:
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 15-APR-2012 12:42
:19
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DSG-HP6555b)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 15-APR-2012 12:37:54
[code]...
At the command prompt, lsnrctl.services shows: LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 15-APR-2012 12:43:15
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DSG-HP6555b)(PORT=1521))
)
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully Now I went to start, all programs, Oracle - OraDb11g_home1, Configuration and Migration Tools, right clicked on "Database Configuration Assistant" and changed the properties to be Windows XP SP2 compatible and run as administrator and ran it.
I chose to create a databaseGeneral purpose Global database name ORCL SID ORCL Chose "Configure Enterprise Manager" & "Configure Database Control for local management" and disabled "Automatic maintenance tasks" Used the same password for all accounts
Selected storage type "File System" & "Use Database File Locations from Template" Unchecked Flash Recovery & Archiving Selected "Sample Schemas", "Typical" memory size (1228MB), "Use Automatic Memory Management" Left sizing/character sets/connection mode as default, and Selected "Generate Database Creation Scripts" in C:appadminORCLscripts (if I choose to Create Database, it fails with TNS Protocol Adapter Error).
I now open ORCL.bat in an editor, go to command prompt, create the directories as per the file, set ORACLE_SID=ORCL & path.
Running C:appproduct11.2.0dbhome_1inoradim.exe -new -sid ORCL -startmode manual -spfile gives a message "instance created" & services "OracleJobSchedulerORCL", "OracleVssWriterORCL" (started) & "OracleServiceORCL" (started) are created.
The next step C:appproduct11.2.0dbhome_1inoradim.exe -edit -sid ORCL -startmode auto -srvcstart system give an error "Unable to start service, OS Error 1056" (probably implies services already running), nothing is present in the windows alert logs about this. If I stop the service OracleVssWriterORCL, then this command completes, although no messages are returned.
The next step in the batch file starts sqplus /nolog and calls ORCL.sql.
ORCL.sql accepts passwords for sys, system, sysman & dbsnmp. It then executes host C:appproduct11.2.0dbhome_1inorapwd.exe file=C:appproduct11.2.0dbhome_1databasePWDORCL.ora force=y, which prompts me for the password for sys.
ORCL.sql then calls CloneRmanRestore.sql, which then tries to run connect "SYS"/"&&sysPassword" as SYSDBA
This is when I get the error ORA-12560: TNS:protocol adapter error, which has been haunting me for days.
My gut feel is that the database creation step at sqlplus is unable to recognise the listener...or probably it does not recognise the modified registry location (with Wow6432Node), the file oracle.key in C:appproduct11.2.0dbhome_1BIN shows the string SOFTWAREORACLEKEY_OraDb11g_home1.
I then changed oracle.key to point to SOFTWAREWow6432NodeORACLEKEY_OraDb11g_home1, restarted the listener and ORCL service, but connecting as sys returns the same error.
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedI am looking for Oracle database 10g (best if it is the lastest release of 10G) 64bit for windows2003 64bit machine but cuold not find the download (Oracle has took this off line, only 11g is available). where can I get this installation file?
View 1 Replies View RelatedI downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005).
View 10 Replies View RelatedThere are only OCI headers in 9.2.0/rdbms/demo directory in our installation of Oracle 9.2:
9.2.0/rdbms/demo/ocixad.h
9.2.0/rdbms/demo/oci.h
9.2.0/rdbms/demo/oci1.h
...
In Oracle 10.2 installation there are OCI headers in rdbms/public directory:
10.2.0/rdbms/public/ocidem.h
10.2.0/rdbms/public/ocidfn.h
10.2.0/rdbms/public/ocikpr.h
10.2.0/rdbms/public/oci.h
10.2.0/rdbms/public/oci1.h
...
What should be installed additionally to have OCI headers in rdbms/public in Oracle 9.2.0?
I am trying to setup my environment to prepare for hands on DBA exercises from an OCM handbook for 10g -OCM:Oracle Database 10g Administrator Certified Master Exam Guide
I need access to the following files
gc_10205_part1of2.zip, gc_10205_part2of2.zip for 32 bit linux
Apparently the above along with other Grid software was once attainable from the link below but sometime between this year and the last Oracle decided to remove this and other software from public access. URL.....
I doubt Oracle will hear my plea - educational purposes only - so given I want access to the software only.
While creating the index we are getting the error "ORA-00603: ORACLE server session terminated by fatal error".
We have the space in tablespaces and also in the file systesm.
I have upgraded my database from 10.2.0.4 to 10.2.0.5. however while upgrading database using DBUA I am getting this error.table or view does not exist ORA-06512: at "WMSYS.OWM_MIG_PKG", line 1579 ORA-06512: at "WMSYS.OWM_MIG_PKG", line 1596 ORA-06512: at line 1The WMSYS.OWM_MIG_PKG is warped package and I can't understand what it means. How can I understand what view or table is absent in my database?
View 6 Replies View RelatedWHAT IS THE DIFFERENCE BETWEEN ORA ERROR AND LRM ERROR?
View 9 Replies View RelatedI want to create a schedule as below. But it shows error message which i cant understand.
begin
DBMS_SCHEDULER.CREATE_jOB(
job_name => 'Alert_monitor',
[Code]....
Here is the error message.
Error at line 1
ORA-06550: line 2, column 1:
PLS-00306: wrong number or types of arguments in call to 'CREATE_JOB'
ORA-06550: line 2, column 1:
PL/SQL: Statement ignored
When I try to log into my db with a specific user I get this message. Below is from the alert log. I can login as system just fine.
----- Error Stack Dump -----
ORA-00604: error occurred at recursive SQL level 1
ORA-01438: value larger than specified precision allowed for this column
ORA-06512: at line 2
Oracle 10g OEL 5.5
While after connecting to server via my userid( its an externally id) ,after setting ORACLE_HOME and SID, while entering sqlplus / command,its not connecting.Error am getting is:-
ERROR:
ORA-01034: ORACLE not available
ORA-27123: unable to attach to shared memory segment
HP-UX Error: 22: Invalid argument
Attaching output session.
I have installed oracle 10g server (10.2.0) standard. My OS is win xp sp-2.
when I run sqlplus or toad, Error Message comes ORA-01033: ORACLE initialization or shutdown in progress.
I have done below steps
in command prompt: C:sqlplus/nolog
sql:> connect system/admin (this is my database username/pass)
Error
ORA-01033: ORACLE initialization or shutdown in progress
sql:> shutdown immediate
not connected
database closed
notconnected
database dismounted
ORA-01012 not logged on
sql:> Startup
01031: insufficient privilegs
not success. till error message comes
This is on a vmware virtual server on Windows 2008R2 using ORACLE 11g R2 with patch set 6
I installed ORACLE (software only) and applied patch set 6 and tried to create a new database.
during the database creation I got an error as the system was adding the JVM that read:-
ORA-01927:cannot REVOKE privileges you did not grant.
I was given the options to ignore or abort
I chose to ignore the error and continue.
After the database creation completed I looked in the jserver log copied below and found two errors
I did not get the same error before installing patch set 6
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
No errors.
alter system flush shared_pool
drop role javauserpriv
[Code].....
The steps to move OMF files in ASM. I tried the following and was not successful.
RMAN> switch database to copy;
datafile 1 switched to datafile copy "+DATA01/pa01pod_im1l059p/datafile/system.357.809972853"
datafile 2 switched to datafile copy "+DATA01/pa01pod_im1l059p/datafile/sysaux.363.809972837"
datafile 3 switched to datafile copy "+DATA01/pa01pod_im1l059p/datafile/undotbs1.365.809972737"
datafile 4 switched to datafile copy "+DATA01/pa01pod_im1l059p/datafile/users.361.809972859"
datafile 5 switched to datafile copy "+DATA01/pa01pod_im1l059p/datafile/undotbs2.360.809972761"
datafile 6 switched to datafile copy "+DATA01/pa01pod_im1l059p/datafile/undotbs3.359.809972787"
datafile 7 switched to datafile copy "+DATA01/pa01pod_im1l059p/datafile/undotbs4.358.809972811"
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 03/13/2013 16:30:05
ORA-01139: RESETLOGS option only valid after an incomplete database recovery
RMAN> alter database open;
so switch worked reset logs says can't use it there so I just try to open and it just hangs.
From the view v$flash_recovery_area_usage, below output shows total no of files are 24+4=28.
FILE_TYPE NUMBER_OF_FILES
------------ ---------------
CONTROLFILE 0
ONLINELOG 0
ARCHIVELOG 24
BACKUPPIECE 4
IMAGECOPY 0
FLASHBACKLOG 0
From the view v$recovery_file_dest, it shows the no of files are 49.
NAME NUMBER_OF_FILES
------------ ----------------
/dba/backup 49
Why there is discrimination?
SQL> startup mount
ORACLE instance started.
Total System Global Area 905969664 bytes
Fixed Size 1293720 bytes
Variable Size 520094312 bytes
Database Buffers 377487360 bytes
Redo Buffers 7094272 bytes
Database mounted.
SQL> alter database noarchivelog;
Database altered.
SQL> alter database open; alter database open
ERROR at line 1: ORA-00603: ORACLE server session terminated by fatal error