Server Administration :: Error Creating Database Using DBCA Oracle 11g R2?
Nov 18, 2010
This is on a vmware virtual server on Windows 2008R2 using ORACLE 11g R2 with patch set 6
I installed ORACLE (software only) and applied patch set 6 and tried to create a new database.
during the database creation I got an error as the system was adding the JVM that read:-
ORA-01927:cannot REVOKE privileges you did not grant.
I was given the options to ignore or abort
I chose to ignore the error and continue.
After the database creation completed I looked in the jserver log copied below and found two errors
I did not get the same error before installing patch set 6
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
No errors.
alter system flush shared_pool
drop role javauserpriv
[Code].....
View 2 Replies
ADVERTISEMENT
May 16, 2013
I am getting a ORA-03114 (not connected to Oracle) error when I am creating a DB using DBCA. Here are the steps that I do:
1) Log onto the server remotely, using Exceed Query
2) Connect as the oracle user (Oracle)
3) set ORACLE_HOME, PATH
4) Run DBCA, give parameters
At around 12% and again at 19%, I get the error (see screenshot). I also tried to generate the scripts and run them remotely, and the steps run successfully upto & including the step " startup nomount pfile="/oracle/admin/<dbname>/scripts/init.ora"; ". After that, when I try to run the script specified in rmanRestoreDatafiles.sql from SQL> prompt, the error appears, and connection to ORACLE is lost.
Googling the error shows that it is a connectivilty issue, and Oracle says that it is usually caused by user scripts. But I am not running any user-created scripts as part of the DBCA process. Somehow, the instance is timing out immediately after doing the "startup nomount".
View 4 Replies
View Related
May 10, 2011
I installed Oracle 11gR2 withouth creating a database in my laptop. Later when I tried to crete the database using DBCA it shows error ORA-01078:failure in processing system parameters.I clicked on ignore error, then shows the error ORA-01034: Oracle not available.
View 4 Replies
View Related
Aug 15, 2010
I'm getting a "TNS disconnect" after database creation script creation in DBCA. Haven't figured out what's going on. I'm attempting to create a 2nd database on one linux 64 server. I get all the way through DBCA, but it won't go the final mile. Any thoughts? I've tried setting the port to a different port from the existing LISTENER, creating a LISTENER2 and associating it with the 2nd instance.
View 1 Replies
View Related
Jul 14, 2010
create an ASM (Automatic Storage Management) instance using dbca. At first try I mistakenly skipped the part where I click on ASM Parameters to add /dev/raw/raw* as my asm_diskstring so it created an ASM instance. When I get to the next page ASM Disk Groups, I selected Create New and I did not have the desired display, because of the step I missed.
I went back to do some cleaning up as follows:
1) Edit the oratab file to remove the ASM entry
2) backed up these files by renaming to old-<filename>
old-ab_+ASM.dat
old-hc_+ASM.dat
old-lk+ASM
old-orapw+ASM
old-spfile2+ASM.ora
3) killed the following processes (kill -9):
oracle 1590 1 0 22:52 ? 00:00:00 asm_pmon_+ASM
oracle 1592 1 0 22:52 ? 00:00:00 asm_psp0_+ASM
oracle 1594 1 0 22:52 ? 00:00:00 asm_mman_+ASM
oracle 1596 1 0 22:52 ? 00:00:00 asm_dbw0_+ASM
oracle 1598 1 0 22:52 ? 00:00:00 asm_lgwr_+ASM
[code]....
4) Run the following as root:
/u01/app/oracle/product/10.2.0/db_1/bin/localconfig delete
5) Restarted the database
Now when I try to go through the steps to create an ASM instance, at the point after I enter my ASM Parameters, I get the following prompt:
"DBCA will now create and start the ASM instance. After the ASM instance is started you can create the diskgroups to be used as storage for your database."
I click OK. Then I get the error message:
ORA-01012 not logged on
View 12 Replies
View Related
Jun 15, 2011
when i am trying to create a new database in oracle 10 g in my local system when creating database error shows a number 146 no other error is showing what must be the reason.
View 14 Replies
View Related
Feb 17, 2010
I have created a database in Oracle10g which is working fine. Now when I try to create another the system gives the following error.
ORA-12560: TNS protocol adapter error.
View 8 Replies
View Related
Jul 26, 2010
While creating the index we are getting the error "ORA-00603: ORACLE server session terminated by fatal error".
We have the space in tablespaces and also in the file systesm.
View 13 Replies
View Related
Nov 10, 2010
how to create a new database in oracle??
View 2 Replies
View Related
Sep 17, 2012
I am trying to delete a database using dbca, but the database configuration option and delete option are not enabled. It's grayed.
View 1 Replies
View Related
Nov 15, 2011
I found there is clear password in the xml file in the process of Oracle instance creating. The process like below
1, when using the following process to create the instance
Login as user Oracle
/home/Oracle11home/bin/dbca -createDatabase -silent -templateName /home/Oracle11home/assistants/dbca/templates/Small.dbt -gdbName testDB -sid testSID -sysPassword [b]testpwd[/b] -systemPassword [b]testpwd[/b]
2. Found the file in $ORACLE_HOME/checkpoints/dbca/OraDb11g_home2_oracle_creation_checkpoint.xml , it listed the sys and system passwd (like testpwd for sys and system password) directly.
<CHECKPOINT LEVEL="MAJOR" NAME="db_oracle" DESC="db creation checkpoint" STATE="FAIL">
<PROPERTY_LIST>
<PROPERTY NAME="command" TYPE="STRING" VAL=" -silent -createDatabase -templateName Small.dbt -gdbName testDB -sid testpwd -sysPassword testpwd -systemPassword testpwd"/>
</PROPERTY_LIST>
</CHECKPOINT>
I hope to confirm :
1. what is the purpose for oracle to genate the checkpoint.
2, can we remove the file safely ?
3, if there is configuration that we can avoid to show clear password in checkpoint file?
View 1 Replies
View Related
Jun 25, 2011
whenever i tried to create spfile from pfile i got this error...oracle not available and shared memory realme does not exist.
View 10 Replies
View Related
Jun 26, 2012
When I try to log into my db with a specific user I get this message. Below is from the alert log. I can login as system just fine.
----- Error Stack Dump -----
ORA-00604: error occurred at recursive SQL level 1
ORA-01438: value larger than specified precision allowed for this column
ORA-06512: at line 2
Oracle 10g OEL 5.5
View 9 Replies
View Related
Mar 5, 2013
While after connecting to server via my userid( its an externally id) ,after setting ORACLE_HOME and SID, while entering sqlplus / command,its not connecting.Error am getting is:-
ERROR:
ORA-01034: ORACLE not available
ORA-27123: unable to attach to shared memory segment
HP-UX Error: 22: Invalid argument
Attaching output session.
View 16 Replies
View Related
May 15, 2012
I have installed oracle 10g server (10.2.0) standard. My OS is win xp sp-2.
when I run sqlplus or toad, Error Message comes ORA-01033: ORACLE initialization or shutdown in progress.
I have done below steps
in command prompt: C:sqlplus/nolog
sql:> connect system/admin (this is my database username/pass)
Error
ORA-01033: ORACLE initialization or shutdown in progress
sql:> shutdown immediate
not connected
database closed
notconnected
database dismounted
ORA-01012 not logged on
sql:> Startup
01031: insufficient privilegs
not success. till error message comes
View 5 Replies
View Related
Sep 21, 2010
I am trying to create the Physical StandBy Database in the same server. Till last 2 Final steps, everything went on well. In the final steps, when I try to open the StandBy Database, it throws the following Error:
*******************************************************
SQL...> alter database open;
alter database open
*
ERROR at line 1:
ORA-01154: database busy. Open, close, mount, and dismount not allowed now
I tried creating the Physical Standby with the following Steps.into that & tell me whether I have done any mistake.Also tell me any step I have missed from the following list of steps:
Environment: Oracle Release 10.2.0.1.0 / Windows 2003 Server Enterprise Edition SP2
Primary DB = 'PrimDB'
StandBy DB to be created = 'StBy1DB'
In the same Server, location for
PrimDB datafiles = 'F:\oracle\product\10.2.0\oradata\PrimDB\Data\',
StandBy Datafiles = 'E:\StandBy_DB\Data\'
[code]...
ERROR at line 1:
ORA-01154: database busy. Open, close, mount, and dismount not allowed now
View 6 Replies
View Related
Mar 6, 2011
I've been working to create (via script) this database for the last 2 days.. everytime I startup in nomount mode (as sysdba), it displays this error:
$ echo $ORACLE_SID
elams
$
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Mar 7 09:41:26 2011
[code]....
View 4 Replies
View Related
Apr 8, 2013
While Creating database on AIX Machine using DBCA utility I am getting following error
Error Details:
-------------------------------------------------------------------------------------------------------------------
Allocating device....
Specifying datafiles...
Specifing datafiles...
Restoring ...
[code]....
View 2 Replies
View Related
Jul 15, 2010
I am learning to create an ASM (Automatic Storage Management) instance using dbca.
View 3 Replies
View Related
May 27, 2011
I hv created a database VAHAN with SID VAHAN , now I want to create another database in it with name SARATHI SID SARATHI.VAHAN db is running perfectly but everytime i tried to create the db with dbca it shows error "ORA-01034: ORACLE not avaiable."
I ran dbstart,lsnrctl start - getting same error..i dbshut the db and use startup nomount - getting same error.
View 3 Replies
View Related
Sep 5, 2005
How to
1) to define a job in oracle9i for solaris
2) to schedule this job
Remember i have prior experience deploying jobs at windows platform but when i try it on (9i for ) solaris, the script does not work as it does not accept a submit job request.
View 4 Replies
View Related
Jan 27, 2012
I'm trying to run dbca in silent mode and works perfect, this is how the code look like:
dbca -silent -createDatabase -templateName Transaction_Processing.dbc -gdbName test.mydomain -sid test
-sysPassword passoracle -systemPassword passoracle -emConfiguration LOCAL -dbsnmpPassword passoracle
-sysmanPassword passoracle -characterSet WE8ISO8859P1
-initParams "open_cursors=500"
The problem is when I specify more than one initialization parameter in -initParams. If I try something like
-initParams "open_cursors=500, parallel_max_server=0"
Then I get this error Exception in thread "main".
View 3 Replies
View Related
Nov 5, 2012
dbca -silent -deleteDatabase -sourceDB TEST
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_TEST'
also tried to start the same instance and i get these messages - i did not created these oracle instance just trying to remove it and recreating it
SQL*Plus: Release 11.2.0.3.0 Production on Mon Nov 5 15:34:41 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_TEST'
SQL> exit
Disconnected
View 6 Replies
View Related
Mar 6, 2010
I have installed asm lib and asm instance has started successfully and is working if i am using
EXPORT ORACLE_SID=+ASM
but if I am using DBCA after that to create database on ASM activated disk group I am having problem in creation of spfile. How to follow steps to create database using already installed /mounted disk group with DBCA.
View 1 Replies
View Related
May 4, 2010
I start my database and suddenly got this error:
ORA-00371: not enough shared pool memory, at least 72102521958 bytes
How to fix? I use startup command only and shutdown when shutdown the database.
View 2 Replies
View Related
Sep 16, 2011
i am creating database manually in oracle 9i os version ibm-aix5.3 it showing following error
CREATE DATABASE "varathu"
*
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: controlfile could not be created
ORA-00202: controlfile: '/backup/varathu/control01.ctl'
ORA-27040: skgfrcre: create error, unable to create file
IBM AIX RISC System/6000 Error: 13: Permission denied
View 18 Replies
View Related
Jan 27, 2011
One of colleague (who has left) created a database link using the statement:
CREATE PUBLIC DATABASE LINK CIVCLMANLINK USING ''CIVCLMAN''
When I try to use this link like:
SELECT * FROM CLIENTMANAGEMENT.ADDRESS@CIVCLMANLINK;
I get the following error:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
I can connect to the CIVCLMAN using the Oracle Enterprise Manager / SQL Plus, I can tnsping as well
View 25 Replies
View Related
Dec 20, 2011
i want to create new database in oracle 10g, i follow following steps.
C:ORACLE_SID=ALI
THEN create passwordfile
orapwd file=orapwdALI.ora password=ali entries=6
then create oracle instance
C:Oradim -new -sid ALI -STARTMODE AUTO
after that i use
SQLPLUS /NOLOG
THEN i write the command to connect to user ali but
CONNECT SYS/ali as sysdba
it display following message.
Error
ORA-1256: TNS: protocol adapter.
i also check the oracle services from "services.msc", where oracle instance is "start".
View 9 Replies
View Related
Jul 9, 2010
I was surprised when I shutdown our production dB. I got this error:
$ . oraenv
ORACLE_SID = [abcd] ?
SQL> shutdown
ORA-01116: error in opening database file 26
ORA-01110: data file 26: '/VOL03/oradata/qxyz/data/qxyz_data01.dbf'
ORA-27041: unable to open file
SVR4 Error: 2: No such file or directory
Additional information: 3
SQL> shutdown abort
ORACLE instance shut down.
2 days ago i rename this file QXYZ_DATA01.dbf from it's original name of QXYZ01.dbf without knowing that I was in the 'abcd' instance. When I backup a controlfile I noticed that it was part of the 'abcd' data files, so I just delete it (from OS level).
Is there any risk involved in the 'abcd' instance? How do I get rid of that file 'qxyz_data01.dbf' in the 'abcd' instance.
View 13 Replies
View Related
Feb 7, 2013
In one machine I have windows xp with Oracle 11.2.0.2 database installed and I am able to connect to the database using both sql developer and sql plus.
In another machine I have windows 7. I installed Oracle client 11.2.0.1, then using Net configuration tool, I installed both listener.ora and tnsnames.ora files.
Now, I want to connect to the database which is installed on windows xp from windows 7 using the oracle client. When I tried to connect, I got the following error :
ERROR:ORA-12560: TNS:protocol adapter error
In order to rectify the above error, I was making sure that ORACLE_HOME AND ORACLE_SID were properly set in the regedit file (under HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE). The ORACLE_HOME was set properly. But I found ORACLE_SID missing. So I added ORACLE_SID environment variable in the registry and re-tried connecting to the database. But I am not able to connect. What else should I do in order to connect?
View 6 Replies
View Related
