Server Administration :: Unable To Delete A Database Using Dbca?
Sep 17, 2012I am trying to delete a database using dbca, but the database configuration option and delete option are not enabled. It's grayed.
View 1 Replies
ADVERTISEMENT
Server Administration :: ORA-01078 While Creating Database Using DBCA?
May 10, 2011I installed Oracle 11gR2 withouth creating a database in my laptop. Later when I tried to crete the database using DBCA it shows error ORA-01078:failure in processing system parameters.I clicked on ignore error, then shows the error ORA-01034: Oracle not available.
View 4 Replies View RelatedServer Administration :: ORA-03114 Error While Creating Database Using DBCA
May 16, 2013I am getting a ORA-03114 (not connected to Oracle) error when I am creating a DB using DBCA. Here are the steps that I do:
1) Log onto the server remotely, using Exceed Query
2) Connect as the oracle user (Oracle)
3) set ORACLE_HOME, PATH
4) Run DBCA, give parameters
At around 12% and again at 19%, I get the error (see screenshot). I also tried to generate the scripts and run them remotely, and the steps run successfully upto & including the step " startup nomount pfile="/oracle/admin/<dbname>/scripts/init.ora"; ". After that, when I try to run the script specified in rmanRestoreDatafiles.sql from SQL> prompt, the error appears, and connection to ORACLE is lost.
Googling the error shows that it is a connectivilty issue, and Oracle says that it is usually caused by user scripts. But I am not running any user-created scripts as part of the DBCA process. Somehow, the instance is timing out immediately after doing the "startup nomount".
Server Administration :: Error Creating Database Using DBCA Oracle 11g R2?
Nov 18, 2010This is on a vmware virtual server on Windows 2008R2 using ORACLE 11g R2 with patch set 6
I installed ORACLE (software only) and applied patch set 6 and tried to create a new database.
during the database creation I got an error as the system was adding the JVM that read:-
ORA-01927:cannot REVOKE privileges you did not grant.
I was given the options to ignore or abort
I chose to ignore the error and continue.
After the database creation completed I looked in the jserver log copied below and found two errors
I did not get the same error before installing patch set 6
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
No errors.
alter system flush shared_pool
drop role javauserpriv
[Code].....
Server Administration :: TNS Error - DBCA After Database Creation Script Complete
Aug 15, 2010I'm getting a "TNS disconnect" after database creation script creation in DBCA. Haven't figured out what's going on. I'm attempting to create a 2nd database on one linux 64 server. I get all the way through DBCA, but it won't go the final mile. Any thoughts? I've tried setting the port to a different port from the existing LISTENER, creating a LISTENER2 and associating it with the 2nd instance.
View 1 Replies View RelatedServer Administration :: Unable To Delete Archive Files Through ASMCMD
Apr 13, 2011we are getting below error:
ora-00257 archiver error. connect internal only until freed
when we tried to remove the unwanted arc files thro ASMCMD,we are getting below error:
ASMCMD> rm -ef 2011_04_05/
Unknown option: e
usage: rm [-rf] <name1 name2 . . .>
ASMCMD> rm -rf 2011_04_05/
ORA-15032: not all alterations performed
ORA-15028: ASM file '+XCOM_BACKUP_DG/TXCOM/ARCHIVELOG/2011_04_05/thread_2_seq_27215.1143.747641143' not dropped; currently being accessed (DBD ERROR: OCIStmtExecute)
ORA-15032: not all alterations performed
ORA-15028: ASM file '+XCOM_BACKUP_DG/TXCOM/ARCHIVELOG/2011_04_05/thread_3_seq_21762.826.747641143' not dropped; currently being accessed (DBD ERROR: OCIStmtExecute)
ORA-15032: not all alterations performed
ORA-15177: cannot operate on system aliases (DBD ERROR: OCIStmtExecute)
further we checked FRA size:
SQL> select * from v$flash_recovery_area_usage;
FILE_TYPE PERCENT_SPACE_USED PERCENT_SPACE_RECLAIMABLE NUMBER_OF_FILES
------------ ------------------ ------------------------- ---------------
CONTROLFILE 0 0 0
ONLINELOG 0 0 0
ARCHIVELOG 3.19 0 38
BACKUPPIECE 0 0 0
IMAGECOPY 0 0 0
FLASHBACKLOG 0 0 0
and checked any arc processing holding lock on arc files:
> ps -ef | grep -i ora_arc*
oracle 6989 1 0 15:07 ? 00:00:00 ora_arc0_TXCOM1
oracle 6991 1 0 15:07 ? 00:00:00 ora_arc1_TXCOM1
oracle 12246 12164 0 15:17 pts/4 00:00:00 grep -i ora_arc*
oracle 13452 1 0 Mar23 ? 00:01:07 ora_arc0_TWEBAPPS1
oracle 13454 1 0 Mar23 ? 00:00:30 ora_arc1_TWEBAPPS1
oracle 15402 1 0 Mar23 ? 00:00:50 ora_arc0_SXCOM1
[Code] ........
but we were not able to remove those .arc files from that folder. finally we have down all the instances and deleted those files manually.
Server Administration :: How To Delete A Database
Feb 5, 2012How can i delete a database? i using the dbca,but the Delate a Database can not use,why?
View 3 Replies View RelatedServer Administration :: How To Delete All Objects From Database
Jul 30, 2012How can I delete all the objects from my database?
View 18 Replies View RelatedServer Administration :: Unable To Find Server Process In Oracle Database For Specific Application / Client
Feb 13, 2013I am trying to find the unix process for one of my application in the database but I am unable to view the same. To simulate, I did the following.
1. My database runs on different server.
2. I invoked "sqlplus" from another unix box to login to the database.
3. I found that the process id (ps -ef |grep sqlplus).
4. When I execute the below mentioned query it does not display the process id that I am looking for. But the osuser, username, program and machine details are correct. How can I know the process details from the database?
SELECT SYS.GV_$SESSION.OSUSER, SYS.GV_$SESSION.USERNAME, SYS.GV_$PROCESS.SPID,
SYS.GV_$SESSION.MACHINE, SYS.GV_$SESSION.PROGRAM,
SYS.GV_$PROCESS.PROGRAM ,SYS.GV_$SESSION.SQL_ID
FROM
SYS.GV_$PROCESS, SYS.GV_$SESSION
WHERE
SYS.GV_$PROCESS.ADDR=SYS.GV_$SESSION.PADDR and SYS.GV_$SESSION.USERNAME='TEST'
and SYS.GV_$SESSION.MACHINE like '%hostname%'
Server Administration :: Unable To Login Database?
Oct 15, 2011I have installed Oracle in workgroup, while i workgroup it is working fine. But latter I have change the server from workgroup to domain. At that time Oracle was not working , not able to connect. After that I change the Domain to workgroup again. And same problem exist. But I found that lsnrctl is working fine. But OracleServiceXXX is not able to startup in services.msc
View 7 Replies View RelatedServer Administration :: Unable To Create Database?
Aug 21, 2013I am installing Oracle 12c R1 on Windows 2012. The windows is configured as a domain controller. I am logged in as the domain administrator.I created a normal domain user -- DomainNameORACUSER. I provided this as the existing user id during Oracle installation.
The software installs fine, but when creating the DB using the database configuration assistant, an error is shown "error in process:...inoradim.exe. Enter password for Oracle service user: DIM-00019: create service error. O/S-Error: (OS 87) The parameter is incorrect". The DB is not created.
I skipped the db creation and completed the installation. When tried to create the db using the database configuration assistant after installation, I received the same error.I performed the same installation on Windows 8 and was successful in creating the db.
Server Administration :: Unable To Connect To Database
Nov 27, 2010I have installed a database in D drive. I want to create another database in the same machine. I tried installing the new database using DBCA. Installation was ok. I added entry in TNS file.
When i try to login to this new database from other machine, i am unable to connect to this database. I made an entry in TNS on my local machine. It says the user id /password is wrong, even though they r correct. I am using the same password to delete the database.
Server Administration :: Unable To Connect To Database?
Sep 26, 2013I migrated one database ( DB1) from old database server to new database server where user accounts were locked before migrating the database.But migration was successful and database and accounts got created in new database server.
In old database server , user accounts status is locked and in new database server user accounts are open but still i am unable to connect to database using new user in new database server.
why im unable to connect to database whose accounts are open?
Server Administration :: Unable To Startup Database
Jun 20, 2011im new to DBA.i installed oracle on my pc but im not able to startup database...im manually creating database ..CRD files r still not created as im unable to startup nomount..im getting this error.
SQL> startup nomount
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-03113: end-of-file on communication channel
i almost worked on this for 10 days but im getting the same error...
Server Administration :: How To Create ASM Instance Using DBCA
Jul 15, 2010I am learning to create an ASM (Automatic Storage Management) instance using dbca.
View 3 Replies View RelatedServer Administration :: ORA-01034 While Running Dbca
May 27, 2011I hv created a database VAHAN with SID VAHAN , now I want to create another database in it with name SARATHI SID SARATHI.VAHAN db is running perfectly but everytime i tried to create the db with dbca it shows error "ORA-01034: ORACLE not avaiable."
I ran dbstart,lsnrctl start - getting same error..i dbshut the db and use startup nomount - getting same error.
Server Administration :: Running DBCA In Silent Mode
Jan 27, 2012I'm trying to run dbca in silent mode and works perfect, this is how the code look like:
dbca -silent -createDatabase -templateName Transaction_Processing.dbc -gdbName test.mydomain -sid test
-sysPassword passoracle -systemPassword passoracle -emConfiguration LOCAL -dbsnmpPassword passoracle
-sysmanPassword passoracle -characterSet WE8ISO8859P1
-initParams "open_cursors=500"
The problem is when I specify more than one initialization parameter in -initParams. If I try something like
-initParams "open_cursors=500, parallel_max_server=0"
Then I get this error Exception in thread "main".
Server Administration :: Unable To Drop User Without Database Shutdown
Apr 19, 2013We are unable to drop user due to below error, how to drop the below user without shutdown the database.
SQL> drop user mvm_2010 cascade;
drop user mvm_2010 cascade
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-14452: attempt to create, alter or drop an index on temporary table already in use
No session was available for particular user.
Server Administration :: Unable To Access Remote Database Using DBLink
May 21, 2010We have created a new db link. But we are not able access the remote database. When we are trying to access any table using db link system is getting hanged.
We would like to know what are the parameters/permissions which affect the db link access either at data base level or at server level.
One observation we made is that that particular db link is not getting dropped when we tried to drop it.
Server Administration :: Creating ASM Instance Using DBCA / ORA-01012 Not Logged On
Jul 14, 2010create an ASM (Automatic Storage Management) instance using dbca. At first try I mistakenly skipped the part where I click on ASM Parameters to add /dev/raw/raw* as my asm_diskstring so it created an ASM instance. When I get to the next page ASM Disk Groups, I selected Create New and I did not have the desired display, because of the step I missed.
I went back to do some cleaning up as follows:
1) Edit the oratab file to remove the ASM entry
2) backed up these files by renaming to old-<filename>
old-ab_+ASM.dat
old-hc_+ASM.dat
old-lk+ASM
old-orapw+ASM
old-spfile2+ASM.ora
3) killed the following processes (kill -9):
oracle 1590 1 0 22:52 ? 00:00:00 asm_pmon_+ASM
oracle 1592 1 0 22:52 ? 00:00:00 asm_psp0_+ASM
oracle 1594 1 0 22:52 ? 00:00:00 asm_mman_+ASM
oracle 1596 1 0 22:52 ? 00:00:00 asm_dbw0_+ASM
oracle 1598 1 0 22:52 ? 00:00:00 asm_lgwr_+ASM
[code]....
4) Run the following as root:
/u01/app/oracle/product/10.2.0/db_1/bin/localconfig delete
5) Restarted the database
Now when I try to go through the steps to create an ASM instance, at the point after I enter my ASM Parameters, I get the following prompt:
"DBCA will now create and start the ASM instance. After the ASM instance is started you can create the diskgroups to be used as storage for your database."
I click OK. Then I get the error message:
ORA-01012 not logged on
Server Administration :: Unable To See / Insert Chinese Characters In Oracle Database
Jun 14, 2013We are getting problem with the Chinese character set. My current character set is as follows.
PARAMETER VALUE
---------------------------------------------------------------- ----------------------------------------------------------------
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
[code]....
My column description for the table product is as follows.
PART_NBRVARCHAR2 (30 Byte)
PART_DESCNVARCHAR2 (2000)
when trying to insert Chinese character using the insert command below
insert into product(part_nbr,part_desc,cust_name) values('322341',unistr('功'),'test');
I am getting the value when selecting the same record using the select command
select a.part_nbr,a.part_desc,a.cust_name from product a where a.part_nbr='322341'322341¿test
When I running this command on TOAD
select a.rowid,a.part_nbr,a.part_desc,a.cust_name from product a where a.part_nbr='322341'
and manually editing/inserting '功' character in output from select command above. After that I am able to get the same Chinese character when I am running select next time.
Server Administration :: ORA-00119 / Invalid Specification For System While Dbca DeleteDatabase
Nov 5, 2012dbca -silent -deleteDatabase -sourceDB TEST
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_TEST'
also tried to start the same instance and i get these messages - i did not created these oracle instance just trying to remove it and recreating it
SQL*Plus: Release 11.2.0.3.0 Production on Mon Nov 5 15:34:41 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_TEST'
SQL> exit
Disconnected
Server Administration :: Unable To Connect To Database / ORA-12560 / TNS / Protocol Adapter Error
Feb 7, 2013In one machine I have windows xp with Oracle 11.2.0.2 database installed and I am able to connect to the database using both sql developer and sql plus.
In another machine I have windows 7. I installed Oracle client 11.2.0.1, then using Net configuration tool, I installed both listener.ora and tnsnames.ora files.
Now, I want to connect to the database which is installed on windows xp from windows 7 using the oracle client. When I tried to connect, I got the following error :
ERROR:ORA-12560: TNS:protocol adapter error
In order to rectify the above error, I was making sure that ORACLE_HOME AND ORACLE_SID were properly set in the regedit file (under HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE). The ORACLE_HOME was set properly. But I found ORACLE_SID missing. So I added ORACLE_SID environment variable in the registry and re-tried connecting to the database. But I am not able to connect. What else should I do in order to connect?
Server Utilities :: Database Installation Using ASM In DBCA
Mar 6, 2010I have installed asm lib and asm instance has started successfully and is working if i am using
EXPORT ORACLE_SID=+ASM
but if I am using DBCA after that to create database on ASM activated disk group I am having problem in creation of spfile. How to follow steps to create database using already installed /mounted disk group with DBCA.
Server Administration :: How To Avoid Clear Password In Checkpoint File With Oracle DBCA
Nov 15, 2011I found there is clear password in the xml file in the process of Oracle instance creating. The process like below
1, when using the following process to create the instance
Login as user Oracle
/home/Oracle11home/bin/dbca -createDatabase -silent -templateName /home/Oracle11home/assistants/dbca/templates/Small.dbt -gdbName testDB -sid testSID -sysPassword [b]testpwd[/b] -systemPassword [b]testpwd[/b]
2. Found the file in $ORACLE_HOME/checkpoints/dbca/OraDb11g_home2_oracle_creation_checkpoint.xml , it listed the sys and system passwd (like testpwd for sys and system password) directly.
<CHECKPOINT LEVEL="MAJOR" NAME="db_oracle" DESC="db creation checkpoint" STATE="FAIL">
<PROPERTY_LIST>
<PROPERTY NAME="command" TYPE="STRING" VAL=" -silent -createDatabase -templateName Small.dbt -gdbName testDB -sid testpwd -sysPassword testpwd -systemPassword testpwd"/>
</PROPERTY_LIST>
</CHECKPOINT>
I hope to confirm :
1. what is the purpose for oracle to genate the checkpoint.
2, can we remove the file safely ?
3, if there is configuration that we can avoid to show clear password in checkpoint file?
Server Administration :: DELETE And Buffer Cache?
Aug 19, 20101)If i issue a DELETE statement to delete a row, will this statement drag any data from the datafile to database buffer? How is the change made by a DELETE statement recorded in buffer cache? How is this change then applied to the data in datafiles after commit?
View 7 Replies View RelatedServer Administration :: How To Delete Flashback Log And Release Space
Feb 15, 2012How to delete flashback log and to release the space?
I guess that it maybe like archive log ,it can release the space using RMAN.But when i try a test ,it fail.
SQL> STARTUP MOUNT;
SQL> ALTER DATABASE FLASHBACK OFF;
Server Administration :: How To Delete Files In Incident Folder
Aug 3, 2010I have got oracle 11g release 1, I need recomendation, how can I delete safely content from the folder C:oraclediag dbmsinstancenameinstancenameincident?
can i delete files manually which are not useful?
Server Administration :: Delete Statements UseTemp Tablespace?
Jun 16, 2011Why large delete statements, with no where clauses, could be using up temp tablespace segments? I thought temp tablespace was just for sort operations,joins, etc.
We have a weekly job that inserts rows into a staging table, deletes, with commit, the a few minutes later and repeats the process. Each delete is using some of the temp tablespace. Eventually we run out of space (ora-01652). That's another thing. I would have thought the space would be released for the next process, but it's now.
SNAP_TIME USERNAME SESSION_ADDR SESSION_NUM MB SQLHASH SQLADDR SQL_TEXT
2011-06-15; 19:10 SCHEMA_USER 0700000209286B00 49680 980 3165065004070000020A8F9F20 DELETE FROM SCHEMA.FIN_RECORDS_TO_EVAL
2011-06-15; 19:15 SCHEMA_USER 070000020F2A7670 10601 275 3165065004070000020A8F9F20 DELETE FROM SCHEMA.FIN_RECORDS_TO_EVAL
2011-06-15; 19:20 SCHEMA_USER 070000020925FE38 19368 4748 3165065004070000020A8F9F20 DELETE FROM SCHEMA.FIN_RECORDS_TO_EVAL
2011-06-15; 19:25 SCHEMA_USER 070000020925FE38 19368 15783 3165065004070000020A8F9F20 DELETE FROM SCHEMA.FIN_RECORDS_TO_EVAL
We will probably switch to truncate statements, but this situation really puzzles me. I've tried view the docs but don't see any of delete statements using temp tablespace.
Server Administration :: Impact On Table Of Partition Truncate / Delete?
Oct 21, 2012Any impact is there if is do the following:
ALTER TABLE MY_TABLE TRUNCATE PARTITION P1 UPDATE GLOBAL INDEXES;
will there be any lock on the table during this operation? DML operations will work without any issue or not?