I have installed asm lib and asm instance has started successfully and is working if i am using
EXPORT ORACLE_SID=+ASM
but if I am using DBCA after that to create database on ASM activated disk group I am having problem in creation of spfile. How to follow steps to create database using already installed /mounted disk group with DBCA.
I was trying to create a 11g database on linux using dbca.
At very end "create database" I got 'The file pach +DATADG/orcl/system01.dbf in invalid. Check the permissions.'
How to check the permission?
i am trying to run DBCA from unix command line. but it gives me error like this:
dbca[158]: /home/oracle/product/10.2.0/jdk/jre/bin/java: not found.
Also i tried to open some other utilites too. like netca it gives me same error.
I installed Oracle 11gR2 withouth creating a database in my laptop. Later when I tried to crete the database using DBCA it shows error ORA-01078:failure in processing system parameters.I clicked on ignore error, then shows the error ORA-01034: Oracle not available.
View 4 Replies View RelatedI am trying to delete a database using dbca, but the database configuration option and delete option are not enabled. It's grayed.
View 1 Replies View RelatedI am getting a ORA-03114 (not connected to Oracle) error when I am creating a DB using DBCA. Here are the steps that I do:
1) Log onto the server remotely, using Exceed Query
2) Connect as the oracle user (Oracle)
3) set ORACLE_HOME, PATH
4) Run DBCA, give parameters
At around 12% and again at 19%, I get the error (see screenshot). I also tried to generate the scripts and run them remotely, and the steps run successfully upto & including the step " startup nomount pfile="/oracle/admin/<dbname>/scripts/init.ora"; ". After that, when I try to run the script specified in rmanRestoreDatafiles.sql from SQL> prompt, the error appears, and connection to ORACLE is lost.
Googling the error shows that it is a connectivilty issue, and Oracle says that it is usually caused by user scripts. But I am not running any user-created scripts as part of the DBCA process. Somehow, the instance is timing out immediately after doing the "startup nomount".
This is on a vmware virtual server on Windows 2008R2 using ORACLE 11g R2 with patch set 6
I installed ORACLE (software only) and applied patch set 6 and tried to create a new database.
during the database creation I got an error as the system was adding the JVM that read:-
ORA-01927:cannot REVOKE privileges you did not grant.
I was given the options to ignore or abort
I chose to ignore the error and continue.
After the database creation completed I looked in the jserver log copied below and found two errors
I did not get the same error before installing patch set 6
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
No errors.
alter system flush shared_pool
drop role javauserpriv
[Code].....
I am facing a issue on DBCA Installation, when i tried from off-shore.
a. When Iam connecting a server using production / Model VPN , and try to start Installing DBCA Using X11-Forwarding of putty,
b. DBCA installation Started but its tooo Slow, it takes more than 3Hrs (Started at 9AM and ends at 11.17AM)
c. First time it fails and second time its went to success, Whereas when i take alog of server ping request - I am getting a frequent "Requested time out" due to network fluctuation.
So let me know is the network fluctuation affects the Installation through VPN, if So how to overcome and is any workaround on that ?
I'm getting a "TNS disconnect" after database creation script creation in DBCA. Haven't figured out what's going on. I'm attempting to create a 2nd database on one linux 64 server. I get all the way through DBCA, but it won't go the final mile. Any thoughts? I've tried setting the port to a different port from the existing LISTENER, creating a LISTENER2 and associating it with the 2nd instance.
View 1 Replies View RelatedI installed oracle 11g on fedora 14 64 bit. i followed the instructions from the oracle docs. successfully installed. even the scripts ran. but when i try to execute dbca command. it says command not found. im in the oracle user acc.
View 10 Replies View RelatedIam facing a issue on DBCA Installation, when i tried remotely from off-shore. Steps I followed
a. I Connected a onsite desktop through a remote desktop connection (RDP) by using Corp-VPN from off-shore.
b. In the Remote Desktop, again by using production / Model VPN , connected the server which i need to Install DBCA
c. Using X11-Forwarding of putty, Started the DBCA installation.
d. Applied all the Parameters and on Finally clicking Finish to Start the database Creation, Finish button not responding and i can't continue the DBCA Installation.
how to find the versions of exp and imp utilities of database server from windows command prompt?
Note: Currently i have 10.2.0.10 oracle software installed on my local machine.
I was using DBCA to create database in 11g. It goes to the last step ,but was not able to show up database creation screen. I am running it on AIX.
View 1 Replies View RelatedWhy there is default table such as AQ$_INTERNET and other table when I create database with DBCA I want to create commplete blank database
View 4 Replies View RelatedWe are planning to install second instance of Oracle 11gR2 in Linux server 2.6.39-400.21.1.el6uek.x86_64 x86_64. This is something we never haven done before. The existing instance has all the standard ports:
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Enterprise Manager Console HTTP Port (pterpdb02) = 1158
Enterprise Manager Agent Port (pterpdb02) = 3938
What ports should we select for second listener and enterprise manager? Is there anything else that we need to know before we install the second instance?
Can i have 2 versions of oracle database installed on same server under one user on AIX also on windows,
Currently we have oracle 10.2.0.4.0 installed on AIX server, can we install oracle 11gR2 on the same server under on user, & both the versions will be in use.
How to manage the profile of the user having 2 oracle versions on AIX & on windows how to handle it.
Yesterday i installed oracle 11g r2 by default i installed database Oracle with the installation .but today i tried to create the database with the name green tat also completed successfully..the problem is in startup
export oracle_sid=green
sqlplus '/ as sysdba'
startup
database mounted
select instance_name from v$instance; But it SHowing the instance name as Oracle...i tried with the other method also
export oracle_sid=green
sqlplus /nolog
conn sys/b123 as sysdba
database mounted
select instance_name from V$parameter;
and it shows instance name as green..i tried to see the datafile location for green database
select file_name from dba_data_files; it shows the orcl datafile locations.
Are there any good information about on how to move a 10g database to a new server? We will keep the same disks on the SAN, but make a new installation on the new server.
View 3 Replies View RelatedI have downloaded and install oracle server6 and followed the
[URL].......
but i am getting error as follows
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 120 MB. Actual 42983 MB Passed
Checking swap space: must be greater than 150 MB. Actual 7951 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation, Continue? (y/n) [n] n
User Selected: No
I have tried
#export DISPLAY=localhost:0.0
#export DISPLAY=localhost:0.0
xhost: unable to open display "localhost:0.0"
when i am trying to create a new database in oracle 10 g in my local system when creating database error shows a number 146 no other error is showing what must be the reason.
View 14 Replies View RelatedOn our test database server, we restore a copy of the production database from the rman backup. The process worked well and we could connect and do the processing with sqlplus, or any other third party tools like Toad.
Strange enough, Database Configuration Assistant (DBCA) does not recognize it. So if we like to drop the database from the DBCA, it is not there. Also we could not get the DBCONSOLE to work with.
The all powerful command: emca -repos recreate generates a list of errors.
While Creating database on AIX Machine using DBCA utility I am getting following error
Error Details:
-------------------------------------------------------------------------------------------------------------------
Allocating device....
Specifying datafiles...
Specifing datafiles...
Restoring ...
[code]....
i would like to import a table from another database by using database link.
impdp muba/muba tables=FUNCTION_NO directory=testdump NETWORK_LINK=DBLINK1
i created the public database link as system user
it gave error like
Import: Release 10.2.0.1.0 - Production on Wednesday, 17 March, 2010 11:07:02
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
Starting "MUBA"."SYS_IMPORT_TABLE_01": muba/******** tables=FUNCTION_NO directory=testdump NETWORK_LINK=DBLINK1
Estimate in progress using BLOCKS method...
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
[code]....
after that i try to import as system user like
impdp system/passwd tables=FUNCTION_NO schemas=muba directory=testdump NETWORK_LINK=DBLINK1
but error like
Import: Release 10.2.0.1.0 - Production on Wednesday, 17 March, 2010 11:27:43
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
UDI-00010: multiple job modes requested, schema and tables.
when i use IMP utility
imp system/passwd file=dump.dmp fromuser=userA touser=userB log=dmplog.log but when i use IMPDP what is the parameter equal to fromuser & touser
i have just create a clone database. it work very well.but when i open the dbca to delete this database.it not show in dbca prompt. why ?
View 4 Replies View RelatedI'm using Oracle Database 11g R2 for study purposes.Currently I'm learning about the DBCA clonic templates.I have an Oracle DB 11g R2 X86 running properly in Ms Windows XP Professional SP 3 X86, using DBCA I created the seed template file .dbc and the .CTL and .DBF files, later I copied those files to a server running Oracle DB 11g R2 X86 in Ms Windows 7 Ultimate X86. Again, using DBCA I successfully created the source database through the seed template file, everything was ok.
Now, I formatted my testing server and I installed Ms Windows 7 Ultimate X64 and Oracle Database 11g R2 X64. I copied the seed template file .dbc and the .CTL and .DBF files to "assistantsdbca emplates" directory. Well, I started DBCA to try create the source database and when the DBCA is creating and starting the Oracle instance it shows the errors:
ORA-00604: error occurred at recursive SQL Level 1
ORA-06553: PLS-801: Internal error [56327]
Is it possible to clone my testing DB from X86 to X64 using DBCA clonic templates?
I am using 10.2.0.1 on OEL5. I have installed CRS, Oracle home, ASM on both nodes and everything is fine.
When invoked dbca to create a database, it says:
*'DBCA could not startup the ASM instance configured on this node. To proceed with database creation using ASM you need the ASM instance to be up and running. Do you want to recreate the ASM instance on this node?'*
Is it a bug? because some blogs say this is a bug. And patch 8288940 will solve this. They also say this patch is to solve the incompatibility between 11g ASM incompatibility with 10g. But here I am using everything of 10.2.0.1.
My question is; I've been reading the Oracle database 11g R2 documentation at this link [URL]...
I passed a couple of days learning about all installation configuration parts including the desktop class and server class.As I was learning, So I had already downloaded Oracle Database Express 11g R2 for win32.
So as i had finished the installation guide I thought it's time to install the oracle now. I did it, and what I found was that there was not any option during installation that i read in above documentation. While trying to find about this difference i reached on documentation[URL]...
That is for express version only.
My question here is, Express edition, we use for learning purpose, But it doesn't look like it has all the stuff that we should learn during installation And what documentation I should follow from my above given two links?
I am learning to create an ASM (Automatic Storage Management) instance using dbca.
View 3 Replies View RelatedI hv created a database VAHAN with SID VAHAN , now I want to create another database in it with name SARATHI SID SARATHI.VAHAN db is running perfectly but everytime i tried to create the db with dbca it shows error "ORA-01034: ORACLE not avaiable."
I ran dbstart,lsnrctl start - getting same error..i dbshut the db and use startup nomount - getting same error.
I have installed oracle software on HPUX IA server.After installation, I am trying to create the database using database template through DBCA.After setting database name , password, database file location and sga size on DBCA, DBCA not initializing the database creation after clicking "Finish" button and does not give any error though.I have tried multiple times but not able to create db using specific template using DBCA.
View 10 Replies View Related
