I installed Oracle 11gR2 withouth creating a database in my laptop. Later when I tried to crete the database using DBCA it shows error ORA-01078:failure in processing system parameters.I clicked on ignore error, then shows the error ORA-01034: Oracle not available.
View 4 RepliesI am getting a ORA-03114 (not connected to Oracle) error when I am creating a DB using DBCA. Here are the steps that I do:
1) Log onto the server remotely, using Exceed Query
2) Connect as the oracle user (Oracle)
3) set ORACLE_HOME, PATH
4) Run DBCA, give parameters
At around 12% and again at 19%, I get the error (see screenshot). I also tried to generate the scripts and run them remotely, and the steps run successfully upto & including the step " startup nomount pfile="/oracle/admin/<dbname>/scripts/init.ora"; ". After that, when I try to run the script specified in rmanRestoreDatafiles.sql from SQL> prompt, the error appears, and connection to ORACLE is lost.
Googling the error shows that it is a connectivilty issue, and Oracle says that it is usually caused by user scripts. But I am not running any user-created scripts as part of the DBCA process. Somehow, the instance is timing out immediately after doing the "startup nomount".
This is on a vmware virtual server on Windows 2008R2 using ORACLE 11g R2 with patch set 6
I installed ORACLE (software only) and applied patch set 6 and tried to create a new database.
during the database creation I got an error as the system was adding the JVM that read:-
ORA-01927:cannot REVOKE privileges you did not grant.
I was given the options to ignore or abort
I chose to ignore the error and continue.
After the database creation completed I looked in the jserver log copied below and found two errors
I did not get the same error before installing patch set 6
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
No errors.
alter system flush shared_pool
drop role javauserpriv
[Code].....
create an ASM (Automatic Storage Management) instance using dbca. At first try I mistakenly skipped the part where I click on ASM Parameters to add /dev/raw/raw* as my asm_diskstring so it created an ASM instance. When I get to the next page ASM Disk Groups, I selected Create New and I did not have the desired display, because of the step I missed.
I went back to do some cleaning up as follows:
1) Edit the oratab file to remove the ASM entry
2) backed up these files by renaming to old-<filename>
old-ab_+ASM.dat
old-hc_+ASM.dat
old-lk+ASM
old-orapw+ASM
old-spfile2+ASM.ora
3) killed the following processes (kill -9):
oracle 1590 1 0 22:52 ? 00:00:00 asm_pmon_+ASM
oracle 1592 1 0 22:52 ? 00:00:00 asm_psp0_+ASM
oracle 1594 1 0 22:52 ? 00:00:00 asm_mman_+ASM
oracle 1596 1 0 22:52 ? 00:00:00 asm_dbw0_+ASM
oracle 1598 1 0 22:52 ? 00:00:00 asm_lgwr_+ASM
[code]....
4) Run the following as root:
/u01/app/oracle/product/10.2.0/db_1/bin/localconfig delete
5) Restarted the database
Now when I try to go through the steps to create an ASM instance, at the point after I enter my ASM Parameters, I get the following prompt:
"DBCA will now create and start the ASM instance. After the ASM instance is started you can create the diskgroups to be used as storage for your database."
I click OK. Then I get the error message:
ORA-01012 not logged on
I am trying to delete a database using dbca, but the database configuration option and delete option are not enabled. It's grayed.
View 1 Replies View RelatedI'm getting a "TNS disconnect" after database creation script creation in DBCA. Haven't figured out what's going on. I'm attempting to create a 2nd database on one linux 64 server. I get all the way through DBCA, but it won't go the final mile. Any thoughts? I've tried setting the port to a different port from the existing LISTENER, creating a LISTENER2 and associating it with the 2nd instance.
View 1 Replies View RelatedI had newly installed oracle 11g database, for testing & learning purpose.
Don't know wht happen to it after successfull installation , I am not able to start database.
Following error is appearing, how to resolve this.
Ora-01078:failure in processing system parameters
I can do only login to idle instance.
when i am trying to create a new database in oracle 10 g in my local system when creating database error shows a number 146 no other error is showing what must be the reason.
View 14 Replies View Relatedhow to create a new database in oracle??
View 2 Replies View RelatedI have created a database in Oracle10g which is working fine. Now when I try to create another the system gives the following error.
ORA-12560: TNS protocol adapter error.
I've been working to create (via script) this database for the last 2 days.. everytime I startup in nomount mode (as sysdba), it displays this error:
$ echo $ORACLE_SID
elams
$
$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Mon Mar 7 09:41:26 2011
[code]....
I am learning to create an ASM (Automatic Storage Management) instance using dbca.
View 3 Replies View RelatedI hv created a database VAHAN with SID VAHAN , now I want to create another database in it with name SARATHI SID SARATHI.VAHAN db is running perfectly but everytime i tried to create the db with dbca it shows error "ORA-01034: ORACLE not avaiable."
I ran dbstart,lsnrctl start - getting same error..i dbshut the db and use startup nomount - getting same error.
I'm trying to run dbca in silent mode and works perfect, this is how the code look like:
dbca -silent -createDatabase -templateName Transaction_Processing.dbc -gdbName test.mydomain -sid test
-sysPassword passoracle -systemPassword passoracle -emConfiguration LOCAL -dbsnmpPassword passoracle
-sysmanPassword passoracle -characterSet WE8ISO8859P1
-initParams "open_cursors=500"
The problem is when I specify more than one initialization parameter in -initParams. If I try something like
-initParams "open_cursors=500, parallel_max_server=0"
Then I get this error Exception in thread "main".
dbca -silent -deleteDatabase -sourceDB TEST
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_TEST'
also tried to start the same instance and i get these messages - i did not created these oracle instance just trying to remove it and recreating it
SQL*Plus: Release 11.2.0.3.0 Production on Mon Nov 5 15:34:41 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_TEST'
SQL> exit
Disconnected
I have installed asm lib and asm instance has started successfully and is working if i am using
EXPORT ORACLE_SID=+ASM
but if I am using DBCA after that to create database on ASM activated disk group I am having problem in creation of spfile. How to follow steps to create database using already installed /mounted disk group with DBCA.
I found there is clear password in the xml file in the process of Oracle instance creating. The process like below
1, when using the following process to create the instance
Login as user Oracle
/home/Oracle11home/bin/dbca -createDatabase -silent -templateName /home/Oracle11home/assistants/dbca/templates/Small.dbt -gdbName testDB -sid testSID -sysPassword [b]testpwd[/b] -systemPassword [b]testpwd[/b]
2. Found the file in $ORACLE_HOME/checkpoints/dbca/OraDb11g_home2_oracle_creation_checkpoint.xml , it listed the sys and system passwd (like testpwd for sys and system password) directly.
<CHECKPOINT LEVEL="MAJOR" NAME="db_oracle" DESC="db creation checkpoint" STATE="FAIL">
<PROPERTY_LIST>
<PROPERTY NAME="command" TYPE="STRING" VAL=" -silent -createDatabase -templateName Small.dbt -gdbName testDB -sid testpwd -sysPassword testpwd -systemPassword testpwd"/>
</PROPERTY_LIST>
</CHECKPOINT>
I hope to confirm :
1. what is the purpose for oracle to genate the checkpoint.
2, can we remove the file safely ?
3, if there is configuration that we can avoid to show clear password in checkpoint file?
While creating the index we are getting the error "ORA-00603: ORACLE server session terminated by fatal error".
We have the space in tablespaces and also in the file systesm.
I am currently running my production database server on win 2003 with oracle9i, I want to create a physical standby server, so I had created new server with same configuration. Need command to apply these datafiles and archives which are generating everyday in my primary database server.
View 1 Replies View RelatedI have a fresh server with no databases. The processes is to create database using a custom script cr_db, this invokes dbca saliently.
While creating a new database i faced the below error: -
Cleaning up failed steps
DBCA_PROGRESS : 4%
Creating and starting Oracle instance
DBCA_PROGRESS : 6%
DBCA_PROGRESS : 7%
DBCA_PROGRESS : 8%
ORA-01501: CREATE DATABASE failed
ORA-01101: database being created currently mounted by some other instance
ORA-01501: CREATE DATABASE failed
ORA-01101: database being created currently mounted by some other instance
DBCA_PROGRESS : 100%
There are no databases in the server : -
[oracle@lxx0019:/prd/dvp/ora/app/oracle/admin/LDD/diag/rdbms/ldd/LDD/trace]# ps -ef | grep pmon oracle 27784 10729 0 10:52 pts/3 00:00:00 grep pmon
i want to create tablespace in raw partion on windows.I have added a hard disk and added extended partition to it. Then created 4 logical partitions of 256 MB with diskpart.exe.I have assigned a drive letter to one of them as X:
However, I am having trouble in creating tablespace on it. I referred to [URL]... I get following error,
C:UsersAdministrator>sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Fri Aug 17 15:32:17 2012
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter user-name: SYSTEM
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing opti
SQL> create tablespace exampletb datafile '\.X:accounting_1' size 100;
create tablespace exampletb datafile '\.X:accounting_1' size 100
ERROR at line 1:
ORA-03214: File Size specified is smaller than minimum required
SQL> create tablespace exampletb datafile '\.X:accounting_1' size 502;
create tablespace exampletb datafile '\.X:accounting_1' size 502
[code]...
I'm new at administrating a database (10gR2 on RHEL5).
1)What are the things need to be considered while creating tablespace?
2)What factors need to be considered when adding space to a tablespace?
whenever i tried to create spfile from pfile i got this error...oracle not available and shared memory realme does not exist.
View 10 Replies View RelatedHow to
1) to define a job in oracle9i for solaris
2) to schedule this job
Remember i have prior experience deploying jobs at windows platform but when i try it on (9i for ) solaris, the script does not work as it does not accept a submit job request.
what is the Minimum datafile size required for creating a non-system tablespace?
I am trying to create a tablespace by giving the syntax like,
SQL> create tablespace t1
2 datafile '/home/data/t1.dbf' size 72k;
create tablespace t1
*
ERROR at line 1:
ORA-03214: File Size specified is smaller than minimum required
SQL> create tablespace t1
2 datafile '/home/data/t1.dbf' size 73k;
Tablespace created.
The blocksize for my database is 4096, as i have heard that the minimum size of the datafile is decided by blocksize, but i want to know that how it is calculated as by giving the above syntax the other values will be default. I am trying the syntax in oracle 9.2.0.1.0 version.
i have win 2008 server and oracle 10g when im try to install oracle it terminate successfully but when insall domain controller in windows , oracle dont terminate the installation and break in creating data base (2%) and return the error message : ora-12560 tns adaptator protocol error
View 1 Replies View RelatedI was using DBCA to create database in 11g. It goes to the last step ,but was not able to show up database creation screen. I am running it on AIX.
View 1 Replies View RelatedWhy there is default table such as AQ$_INTERNET and other table when I create database with DBCA I want to create commplete blank database
View 4 Replies View Relatedusing pl/sql code i am creating text file on specific path of database server. i need to compress this file .how to compress the text file using pl/sql?
View 1 Replies View RelatedI am trying to create the Physical StandBy Database in the same server. Till last 2 Final steps, everything went on well. In the final steps, when I try to open the StandBy Database, it throws the following Error:
*******************************************************
SQL...> alter database open;
alter database open
*
ERROR at line 1:
ORA-01154: database busy. Open, close, mount, and dismount not allowed now
I tried creating the Physical Standby with the following Steps.into that & tell me whether I have done any mistake.Also tell me any step I have missed from the following list of steps:
Environment: Oracle Release 10.2.0.1.0 / Windows 2003 Server Enterprise Edition SP2
Primary DB = 'PrimDB'
StandBy DB to be created = 'StBy1DB'
In the same Server, location for
PrimDB datafiles = 'F:\oracle\product\10.2.0\oradata\PrimDB\Data\',
StandBy Datafiles = 'E:\StandBy_DB\Data\'
[code]...
ERROR at line 1:
ORA-01154: database busy. Open, close, mount, and dismount not allowed now