I have installed Oracle in workgroup, while i workgroup it is working fine. But latter I have change the server from workgroup to domain. At that time Oracle was not working , not able to connect. After that I change the Domain to workgroup again. And same problem exist. But I found that lsnrctl is working fine. But OracleServiceXXX is not able to startup in services.msc
View 7 RepliesFrom metalink: Note 215187.1...Im trying to install SQLT. The installation process ask for:
Specify optional Connect Identifier (as per Oracle Net)
Include "@" symbol, ie. @PROD
If not applicable, enter nothing and hit the "Enter" key
I have tried with SID (@TESTDB) and SERVICE NAME (@TESTDB.mydomain.local) and leaving it blank, nothing works. I cant connect as SQLTXPLAIN.
My database was working fine and now I am not able to login and getting the error:-
"ORA-01033: ORACLE initialization or shutdown in progress"
I have done the below steps:
SQL> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> STARTUP
ORA-32004: obsolete and/or deprecated parameter(s) specified
[code]....
database administration , we are planning to use amazon cloud database , this database does not allow us to login to server machine , unfortunately amazon don't provide ssh to this machine , in general for doing any of adminstration task on the database will there be need to log into the machine ? we can always log in through toad or any other sql client but we cannot do ssh to server..general can this limitation effect administration ?
View 9 Replies View RelatedI have installed oracle 10g server (10.2.0) standard. My OS is win xp sp-2.
when I run sqlplus or toad, Error Message comes ORA-01033: ORACLE initialization or shutdown in progress.
I have done below steps
in command prompt: C:sqlplus/nolog
sql:> connect system/admin (this is my database username/pass)
Error
ORA-01033: ORACLE initialization or shutdown in progress
sql:> shutdown immediate
not connected
database closed
notconnected
database dismounted
ORA-01012 not logged on
sql:> Startup
01031: insufficient privilegs
not success. till error message comes
how can I find out the number of login attempts made by a user in the database and the timings of the attempt
View 1 Replies View RelatedI have a problem to login on my database 11.1.0.7 on linux 64. It were migrated from 9.2.0.4 and everything was fine but now I am not able to connect to database.
Only one way when I can connect is when the database is started in RESTRICTED mode and I cold login under sys (sysdba).
But when i leave this mode, nobody can connect . sqlplus is freeze and I have to kill that session. What could be a reason? Any parameters? It's strange for me because It was working..
I am not able to Login database , what should i do?
View 2 Replies View RelatedI tried to login and start my db this evening and I receive the following message
[oracle@dbs]$ export ORACLE_SID=ORCL
[oracle@ukedxdtmtdbs01a dbs]$ sqlplus '/ as sysdba'
SQL*Plus: Release 11.2.0.1.0 Production on Sat May 14 19:59:48 2011
Copyright © 1982, 2009, Oracle. All rights reserved.
ERROR:
ORA-09925: Unable to create audit trail file
Linux-x86_64 Error: 2: No such file or directory
Additional information: 9925
ORA-01075: you are currently logged on
How can I resolve - none of the passwords I enter seem to work? I have these init files
ls -ltr init*.ora
-rw-r--r-- 1 oracle oinstall 2867 May 14 18:53 init.ora
-rw-r--r-- 1 oracle oinstall 2867 May 14 19:12 initORCL.ora
my init.ora file looks like this:
db_name='ORCL'
memory_target=1G
processes = 150
audit_file_dest='<ORACLE_BASE>/adump'
audit_trail ='db'
[code]...
db had been up and running for about 2 weeks with no issues since installation..I am just trying to get the db up and running - nothing more
I am trying to find the unix process for one of my application in the database but I am unable to view the same. To simulate, I did the following.
1. My database runs on different server.
2. I invoked "sqlplus" from another unix box to login to the database.
3. I found that the process id (ps -ef |grep sqlplus).
4. When I execute the below mentioned query it does not display the process id that I am looking for. But the osuser, username, program and machine details are correct. How can I know the process details from the database?
SELECT SYS.GV_$SESSION.OSUSER, SYS.GV_$SESSION.USERNAME, SYS.GV_$PROCESS.SPID,
SYS.GV_$SESSION.MACHINE, SYS.GV_$SESSION.PROGRAM,
SYS.GV_$PROCESS.PROGRAM ,SYS.GV_$SESSION.SQL_ID
FROM
SYS.GV_$PROCESS, SYS.GV_$SESSION
WHERE
SYS.GV_$PROCESS.ADDR=SYS.GV_$SESSION.PADDR and SYS.GV_$SESSION.USERNAME='TEST'
and SYS.GV_$SESSION.MACHINE like '%hostname%'
I am installing Oracle 12c R1 on Windows 2012. The windows is configured as a domain controller. I am logged in as the domain administrator.I created a normal domain user -- DomainNameORACUSER. I provided this as the existing user id during Oracle installation.
The software installs fine, but when creating the DB using the database configuration assistant, an error is shown "error in process:...inoradim.exe. Enter password for Oracle service user: DIM-00019: create service error. O/S-Error: (OS 87) The parameter is incorrect". The DB is not created.
I skipped the db creation and completed the installation. When tried to create the db using the database configuration assistant after installation, I received the same error.I performed the same installation on Windows 8 and was successful in creating the db.
I have installed a database in D drive. I want to create another database in the same machine. I tried installing the new database using DBCA. Installation was ok. I added entry in TNS file.
When i try to login to this new database from other machine, i am unable to connect to this database. I made an entry in TNS on my local machine. It says the user id /password is wrong, even though they r correct. I am using the same password to delete the database.
I migrated one database ( DB1) from old database server to new database server where user accounts were locked before migrating the database.But migration was successful and database and accounts got created in new database server.
In old database server , user accounts status is locked and in new database server user accounts are open but still i am unable to connect to database using new user in new database server.
why im unable to connect to database whose accounts are open?
im new to DBA.i installed oracle on my pc but im not able to startup database...im manually creating database ..CRD files r still not created as im unable to startup nomount..im getting this error.
SQL> startup nomount
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-03113: end-of-file on communication channel
i almost worked on this for 10 days but im getting the same error...
I am unable to login to my database. I get an error that says "Io exception: the network adapter could not establish the connection" "vendor code 17002".
View 5 Replies View RelatedI am trying to delete a database using dbca, but the database configuration option and delete option are not enabled. It's grayed.
View 1 Replies View RelatedWe are unable to drop user due to below error, how to drop the below user without shutdown the database.
SQL> drop user mvm_2010 cascade;
drop user mvm_2010 cascade
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-14452: attempt to create, alter or drop an index on temporary table already in use
No session was available for particular user.
We have created a new db link. But we are not able access the remote database. When we are trying to access any table using db link system is getting hanged.
We would like to know what are the parameters/permissions which affect the db link access either at data base level or at server level.
One observation we made is that that particular db link is not getting dropped when we tried to drop it.
We are getting problem with the Chinese character set. My current character set is as follows.
PARAMETER VALUE
---------------------------------------------------------------- ----------------------------------------------------------------
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
[code]....
My column description for the table product is as follows.
PART_NBRVARCHAR2 (30 Byte)
PART_DESCNVARCHAR2 (2000)
when trying to insert Chinese character using the insert command below
insert into product(part_nbr,part_desc,cust_name) values('322341',unistr('功'),'test');
I am getting the value when selecting the same record using the select command
select a.part_nbr,a.part_desc,a.cust_name from product a where a.part_nbr='322341'322341¿test
When I running this command on TOAD
select a.rowid,a.part_nbr,a.part_desc,a.cust_name from product a where a.part_nbr='322341'
and manually editing/inserting '功' character in output from select command above. After that I am able to get the same Chinese character when I am running select next time.
In one machine I have windows xp with Oracle 11.2.0.2 database installed and I am able to connect to the database using both sql developer and sql plus.
In another machine I have windows 7. I installed Oracle client 11.2.0.1, then using Net configuration tool, I installed both listener.ora and tnsnames.ora files.
Now, I want to connect to the database which is installed on windows xp from windows 7 using the oracle client. When I tried to connect, I got the following error :
ERROR:ORA-12560: TNS:protocol adapter error
In order to rectify the above error, I was making sure that ORACLE_HOME AND ORACLE_SID were properly set in the regedit file (under HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE). The ORACLE_HOME was set properly. But I found ORACLE_SID missing. So I added ORACLE_SID environment variable in the registry and re-tried connecting to the database. But I am not able to connect. What else should I do in order to connect?
When I run sqlplus and try to loging as system/<admin passwd> I get information:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
I understand, that this is a common question and the common answer is don't have trailing slash in ORACLE_HOME and set ORACLE_SID. But I did this.
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe
export PATH=$PATH:$ORACLE_HOME/bin
export ORACLE_SID=XE
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
I see we are unable to login to database using global database.
[oracle@sl73usircd01 ~]$ sqlplus DEMO@DB1.COM
SQL*Plus: Release 11.2.0.3.0 Production on Mon Mar 11 14:47:31 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Enter user-name: why we are unable to login to database using global database name ?
iSQL*Plus login for SYSDBA
Step-1)
Export the java path.
[harsh@esparkinfo]$ export JAVA_HOME=$ORACLE_HOME/jdk
Step-2)
Change the directory.
[harsh@esparkinfo]$ cd $ORACLE_HOME/oc4j/j2ee/isqlplus/application-deployments/isqlplus
Step-3)
Run the JAZN prompt.
[harsh@esparkinfo]$ $JAVA_HOME/bin/java -Djava.security.properties=$ORACLE_HOME/oc4j/j2ee/home/config/jazn.security.props -jar $ORACLE_HOME/oc4j/j2ee/home/jazn.jar -user "iSQL*Plus DBA/admin" -password welcome -shell
Step-4)
Create user and grant the webDba role to the user.
JAZN>adduser "iSQL*Plus DBA" username password
JAZN>grantrole webDba "iSQL*Plus DBA" username
JAZN>exit
Step-5)
List the user.
JAZN> listusers "iSQL*Plus DBA"
Remove user.
JAZN> remuser "iSQL*Plus DBA" username
[code]...
Step-6)
Login through web browser.
harsh.esparkinfo:5560/isqlplus/dba
When I am trying to login to the oracle server I am getting an error message:
Enter user-name: / as sysdba
ERROR:
ORA-12638: Credential retrieval failed
I have installed executable only (database option only) when i have installed oracle11 that time it is not asking any option for password. So is there any option to login in this type of condition?
I am using this on windows server 2003.
I just create a user and tried to log in but it gives the following error, why?
SQL*Plus: Release 10.1.0.4.2 - Production on Tue Sep 27 10:57:55 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> create user user1 identified by user1;
User created.
SQL> conn user1
Enter password: *****
ERROR:
ORA-12560: TNS:protocol adapter error
Warning: You are no longer connected to ORACLE.
I can login to my database using SQL>sqlplus sys/sys as sysdba
but it doesnot work when i do
SQL>sqlplus sys/sys@nocdb as sysdba
ERROR:
ORA-12518: TNS:listener could not hand off client connection
my tnsnames.ora looks like this
NOCDB =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Abhishek-PC)(PORT = 1522))
[code]....
is this (PORT=54460) causing the problems...i think it should read 1522 as in my listener.ora.
I am using oracle 9i version. My problem is oracle window opens.But i can not login by typing the user name and password. while login an error is displayed as follows.
ORA-01033: ORACLE initialization or shutdown in progress.
I have a situation where when I login as a user to my DBvia sqlplus no service name it takes about 20 secs to connect.Yet when I login as a user with DBA privs it logs in immediately.
Is there something I can do to trace what is happneing behind scences to determine what the login delay may be..
How we can resolve :
Enter user-name: sys as sysdba
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory