Server Administration :: Oracle Ocfs2 Not Working In Enterprise Linux 6.2
Mar 29, 2013RPMS needed by OCFS2 for oracle enterprice linux 6.2,Since we unable to mount through OCFS2 console.
View 1 RepliesRPMS needed by OCFS2 for oracle enterprice linux 6.2,Since we unable to mount through OCFS2 console.
View 1 Repliesjust now i installed oracle 10.2.0.1 client version in one my linux server. after successfully installation sqlplus is not working .
below are my .profile details.
# Set up the shell variables:
EDITOR=vi
export EDITOR
### Set the umask
umask 022
### Set ulimit
[code].....
I am unable to configure EM(Oracle 11.2g) on Redhat Linux 5 Enterprise edition(32 bit). Environment variables are set to correct SID. If I try to run dbca the wizard does not display the Enterprise manager configuration screen. I have tried to create repository by using emca -config dbcontrol -db config.
But it throws exception that database instance is unavailable?
A link which describe step by step with screen shots how can i install oracle 10 r2 on oracle linux server release 6.1 using vmware workshop 8.my actual os is windows server 64 bit in this in install vmware 8 and i install oracle linux server release 6.1 32 bit now i want to install oracle 10g r2 or oracle 11g r2 on this .
View 2 Replies View RelatedI need to configure a watchdog (or any other) utility which will constantly monitor database health. And if something goes wrong with the database, the utility should restart the DB instance.
View 8 Replies View Relatedhow to start OEM 12c agent on Linux server ?
Note:Its a RAC server .
We are using oracle 10g in linux machine which runs as server. And there are around 25 clients which run at the same time parallel to each other. I am new to oracle 10g and also for client-server version of database. I faced some problems when i first put the server into actual use.
-> Users have been created and tablespace is USERS and temporary space is TEMP. RESOURCE privilege is given.
-> Some times login fails for some clients.
-> Some times all the client login will be successful.
-> Query execution will be sometimes fast, but some times it takes too much time.
-> Some times the connection will be lost and again I have bring UP the server.
to maintain the oracle server.
-> Should I have to make any configuration settings in the server.
-> Should I change any values in the server.
-> Is there any way to properly maintain the server.
10g Oracle Standard Edition RAC feature and how it is charged. I mean: is it free option for Standard Edition or payable?
I read something about Baby Rac on wiki and there was information that only with Engerprise Edition RAC is an extra-charge option for Standard Edition RAC is included.
[URL]......
Quote:Oracle Corporation includes RAC with the Standard Edition of Oracle Database (aka Baby RAC), but makes it an extra-charge option for the Enterprise Edition
We do have corporate licencing model in our firm, so we can evaluate what version of Oracle we need to install (One, Standard or Enterprise) bu there is no matter what version we chosed, because our licensing model give us possibility to install the highest version. So usually we were choosing the Enterprise Editions.
But only limitation for us is an options. We can't have additional option like partitioning, RAC, Oracle Tuning Pack, etc... in order to have additional option we need approval from our financial management.
I have idea to change one of our installation from Enterprise Edition to Standard Edition in order to have RAC option for free. Like i said. If we want to have RAC in our Enterprise Edition we need additional approval of money expense - but this is not easy. But our licensing model give us possibility to install Standard Edition of Oracle instead or Enterprise Edition and have RAC option include without additional expenses.
Data Base Configuration assistant for create new database not working in oracle 8.1.7 in windows server 2000 / server 2003 how can i create new database
View 1 Replies View Relatedknow whether i can see anywhere all executed Statements in my DB (Deletes, Updates...)?
perhaps in a particular table or in Oracle Enterprise Manager?
I have a RAC working with SAN raw devices presented to ASM and working fine. My situation has changed since the installation of the RAC. Now I need a shared storage (with a filesystem) to upload some files (so DB can read these as external tables) for this I have used OCFS2.
As you can see I have Oracle RAC on raw ASM + shared storage on OCFS2 and for the time been all seems to be well and working perfectly. Can these coexist with out effecting the other?
Every time when i open terminal, I have to set ORAENV variable in linux. I tried to find out .bash_profile but i can't find where it resides.
View 11 Replies View RelatedFor RAC with ASM, user can not browse the ASM files. From within NTFS or ext2( for linux) they are not seen. Similarly, for OCFS2 , are these oracle files not seen through ext2 , linux file system? Also, for RAC with ASM if I query v$datafile, it returns +diskgroup/dbname/datafile.dbf. What will be the file name returned for datafiles in OCFS2 by this view?
View 2 Replies View RelatedI am testing upgrade from 11.1.0.6 to 11.2.0.2 patchset on linux X86-64 version. And facing the following component related issue.
The following components cannot be upgraded as the corresponding upgrade scripts are missing:
OLAP Analytic Workspace ( /u01/app/oracle/product/11.2.0/dbhome_3/olap/admin/apsdbmig.sql )
OLAP Catalog ( /u01/app/oracle/product/11.2.0/dbhome_3/olap/admin/amddbmig.sql )
Spatial ( /u01/app/oracle/product/11.2.0/dbhome_3/md/admin/sdodbmig.sql )
Oracle OLAP API ( /u01/app/oracle/product/11.2.0/dbhome_3/olap/admin/xoqdbmig.sql )
If you want to upgrade these components, you must first install them, using the OUI, and then re-run the Upgrade Assistant. Do you want to continue with upgrade? Note: If you continue, the above components will not be considered as part of the upgrade process.*
Following is the status of the specified components from 11.1.0.6
COMP_ID COMP_NAME VERSION STATUS
AMD OLAP Catalog 11.1.0.6.0 VALID
SDO Spatial 11.1.0.6.0 VALID
APS OLAP Analytic Workspace 11.1.0.6.0 VALID
Should I install these components while installing 11.2.0.2 patchset prior upgrading? I was unable to find any component installation on OUI.
Also DBUA pre-upgrade asked to remove existing UltraSearch from 11.1.0.6 prior upgrading. Though I removed it, but not sure is that going to hamper the upgraded DB, as I'm not sure of the usage of this component as well.
my host os is win 7 ,,,,i install vm ware and install linux on vmware...now i want to ping linux from win 7...how i can do it... firwall is disable.
[root@lnxdb ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
#
Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
BOOTPROTO=none
HWADDR=00:0C:29:22:FC:FF
[code]...
i want to ping the guest os linux install on vmware to os win7 host ...how?
I've been trying to setup ASM disks for two node cluster using ASMLib. It's a multipath environment
Quote:multipath -ll
mpath2 (36842b2b000528f8d0000029b4ccead44) dm-1 DELL,MD32xx
[size=280M][features=3 queue_if_no_path pg_init_retries 50][hwhandler=1 rdac][rw]
\_ round-robin 0 [prio=100][active]
\_ 1:0:0:1 sdc 8:32 [active][ready]
\_ round-robin 0 [prio=0][enabled]
\_ 1:0:1:1 sdl 8:176 [active][ghost]
[code]....
I've been following Metalink note 602952.1, 309815.1 and 605828.1
metalink note 602952.1 states Quote:Note: Keep in mind for ASMLIB disks you will need to use the /dev/dm-* disks instead of the /dev/mapper/mpath* devices since they are present in the partition table ==)> /proc/partitions and ASMLIB will look at that file during the disk discovering phase. If you do not use the disks located at /dev/dm-* then ASM will not be able to discover them. and to create ASM disks with Quote:/etc/init.d/oracleasm createdisk DISK1 /dev/dm-<disk><partition> Also further stating Quote:NOTE: When scanning, only the device names known by the kernel are scanned. With device-mapper, the kernel sees the devices as /dev/dm-XX. The /dev/mapper/XXX names are created by udev for human readability. Any configuration of ORACLEASM_SCANORDER or ORACLEASM_SCANEXCLUDE must use the dm prefix.My environment is RHEL5 and towards the end of the note it says Quote:Note: On release RH 5 the /dev/dm-N devices are not persistent, starting, these devices are no longer created by udev. So release RedHat 5 you can create the ASMLIB disks on the /dev/mpath/<partition> or /dev/mapper/<partition>
Example:
# /etc/init.d/oracleasm createdisk VOL1 /dev/mpath/sata01p1
Or
# /etc/init.d/oracleasm createdisk VOL1 /dev/mapper/mpath2p1
Therefore I created a ASM disk using /dev/mapper path and it is only visible on the node it was created. Even after scandisks on other node it is still not visible when listdisks/oracleasm-discover
I've also tried creating the asm disks with dm-12 option and the same, disk get created but not visible on the other node.
Moreover if I restart the oracleasm restart the disk disappears from the node that it was visible Quote:
[root@db2 ~]# /etc/init.d/oracleasm createdisk vol1 /dev/mapper/mpath6p1
Marking disk "vol1" as an ASM disk: [ OK ]
[root@db2 ~]# ls -l /dev/oracleasm/disks/*
brw-rw---- 1 oracle dba 253, 12 Nov 8 10:22 /dev/oracleasm/disks/VOL1
[root@db2 ~]# /etc/init.d/oracleasm scandisks
Scanning the system for Oracle ASMLib disks: [ OK ]
[code]....
But disk lable is there and could be seen from both nodes on the same partition Quote:
head /dev/mapper/mpath6p1
VOL1ORCLDISKVOL1
My suspicion is on multipath configuration. I've tried both (not at the same time) combinations given below.
Quote:ORACLEASM_SCANORDER="dm"
ORACLEASM_SCANEXCLUDE="mpath mapper sd sda sdb"
and
Quote:ORACLEASM_SCANORDER="mapper"
ORACLEASM_SCANEXCLUDE="mpath dm sd sda sdb"
But still the problem is there, (disks disappears when asm is restarted and never visible on the "other" node).
Every time I hit up, down, left, and right arrow keys to return to a previous sql command I got ^[[D, fix this issue? The backspace works fine with me.
View 2 Replies View RelatedOS authentication is not working
Does 11g need any different setting?
Following are the settings
1)
SQL> show parameter os_a
NAME TYPE VALUE
------------------------------------ ----------- --------------
os_authent_prefix string OPS$
remote_os_authent boolean FALSE
2) sqlnet.ora has following setting
SQLNET.AUTHENTICATION_SERVICES = (NTS)
3) I have created user like following
sql> create user OPS$CLASS
2 identified externally
3 default tablespace user_data
4 temporary tablespace temporary_data
5 profile clas_prof
6 account unlock;
user created.
sql> grant connect to OPS$CLASS;
Grant succeeded.
With the same settings it successfully connects from my 9i client to the 9i database
(DB01, below)
C:Documents and SettingsCLASS_user>sqlplus
SQL*Plus: Release 9.2.0.1.0 - Production on Wed Apr 20 10:18:58 2011
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: /@DB01
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SQL> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
However it fails to connect to 11G database (DB02, below)
C:Documents and SettingsCLASS_user>sqlplus
SQL*Plus: Release 9.2.0.1.0 - Production on Wed Apr 20 10:19:29 2011
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Enter user-name: /@DB02
ERROR:
ORA-01017: invalid username/password; logon denied
I am trying to install OEM but the GUI asks for weblogic server home.i checked many documents in net but none has weblogic installation procedure. Is it the sequence of installation ?
View 2 Replies View RelatedI applied the Jan 09 CPU to my database this past Saturday and now my daily schema export is not running properly:
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsExport done in WE8MSWIN1252 character set and UTF8 NCHAR character set server uses UTF8 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user TEST
. exporting PUBLIC type synonyms
. exporting private type synonyms
[code]...
if there are any problems with updating statistics? My manager told me that they had big performance issue when they updated the statistics of whole database. Is this a rare case?
I know the advantages of updating statistics,but are there any dis-advantages?
Am using Oracle 10g on redhat linux machine.
My Agent Connection to Instance is down . I am trying to start it up using EM when i enter my user name and password on host credentials connection fails (am using a suer that installed my oracle software).
It seems that dml trigger doesn't fire when lob field is being updated using dbms_lob package. As it stated in Oracle documentation:
Quote:Using OCI functions or the DBMS_LOB package to update LOB values or LOB attributes of object columns does not cause Oracle to fire triggers defined on the table containing the columns or the attributes.
I need to know that table was updated (or is about to be updated), how can I do that in case it is lob field that is being updated?
Using OUI i have removed the Enterprise Manager DBConsole component and now i need to reinstall them. After starting runinstaller i choose Advance and then Custom and i check the Enterprise Manager DBConsole and after i click on next it says cannot install on the same ORACLE_HOME. How can i reinstall the removed components using OUI. This is not Grid Control
View 2 Replies View RelatedDuring installation of Oracle RAC 11g r1 on Linux using VMware server for Two Nodes, all the pre cluster installation test was successful, and execution of root.sh on node 1 was successful too, but whenever I run the root.sh script on the second node I get error message "Failure at final check of oracle CRS stack. 10"
View 3 Replies View RelatedLooking to install oracle 10g in same server where i have installed already oracle 11g,
: i have looked at how to install oracle 11g and 10g on same linux server.but didn't quite get it ....
I tried to start my oem managing but got the following error.
[oracle@Eagle2 ~]$ emctl start dbconsole
OC4J Configuration issue. /home/oracle/app/product/11.1.0/db_1/oc4j/j2ee/OC4J_DBConsole_Eagle_boomiedb not found.
I have 9i RDBMS Software and RHEL 4. I want to install a Oracle Names server. I install RDBMS.But Where I run netmgr and want to configure and start Oname server it says.
$ORACLE_HOME/bin/names file not exists.
How Can I configure OracleNames Server using Oracle 9i On Linux.
I have Oracle 9i DB in windows 2003 server, I want to access this DB from Linux desktop. Is there any 'client software' is available to connect Or procedure to connect the DB.
View 0 Replies View RelatedI'm not a DBA, but I've inherited an Oracle 11g database on a Linux Red Hat 5 box that I am now responsible for. I've had to relocate it, and my host name has changed. I've muddled through a few changes (network & listener changes), and the database seems to be working a- ok.
My problem is that the OEM doesn't seem to be working now. I don't think the dbconsole is running. When I try to launch it, I'm using the command line:
su - oracle - c "export Oracle_SID=databasename;/u01/app/oracle/product/11.1.0/db1/bin/emctl start dbconsole"
I'm getting the error: EM Configuration issue /u01/app/oracle/product/11.1.0/db1/hostname_databasename not found (obviously replace the hostname and database name with the appropriate names)
The hostname however, contains the OLD hostname.I tried a quick method of copying the folder, and changing the name to include the new hostname, but that didn't work.