we are running oracle database 11.2.0.3 and tomcat on the same machine(SLES 11).
I need to contol tomcat(start/stop) depending to database status. For example, if database stops or become standby then to stop tomcat service.
We are having 10g 2Node RAC on Windows 2003. I cannot stop services by using command ""crsctl stop crs/ srvctl stop database "" without administrator permission through my OS user. Is it possible to stop the services without Administrator permission on OS level.? What kind of OS level permission need to access the ""crsctl/srvctl etc"".
View 6 Replies View Relatedim having problems with CRS in a Rac installation. Because of this i cant start the database.I installed Oracle Rac 11.2.0.1 with ASM in a Red Hat 5.8 linux server. Everything was ok until a server reboot. I have 2 nodes, nodo1 and nodo2. Both got rebooted and after that im not able to start the cluster.
All the other resources seem to be just fine .
At nodo1:
[root@nodo1 oracle]# crsctl start cluster -all
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'nodo1'
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'nodo2'
CRS-2676: Start of 'ora.cssdmonitor' on 'nodo1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'nodo1'
CRS-2672: Attempting to start 'ora.diskmon' on 'nodo1'
CRS-2676: Start of 'ora.cssdmonitor' on 'nodo2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'nodo2'
[code]....
I was trying to create a 11g database on linux using dbca.
At very end "create database" I got 'The file pach +DATADG/orcl/system01.dbf in invalid. Check the permissions.'
How to check the permission?
am trying to install rac 11gr2 config on linux 5.5 on vmware server.
following doc:
[URLs]...
but as in the first step VMware Server Installation:First, install the VMware Server software. On Linux you do this with the following command as the root user.
# rpm -Uvh VMware-server*.rpm
i couldn't find any where on linux disks.
We have 3 node RAC. In one of the node clusterware is down and also CSSD process is down. I got to know that we have to clear socket files in that node.what needs to be done instead ofclearing socket files.
database
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
[code]...
I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
[code]...
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
View 1 Replies View RelatedI am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 Replies View RelatedAm planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies View RelatedI am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedIs it possible to upgrade GI 11.2.0.1 Enterprise Edition version to 11.2.0.3 STANDARD EDITION?
We have 2 Node RAC with 10.2 DB SE. Last time I think by mistake or not knowing the licensing information GI was upgraded to EE 11.2.0.1 by somebody or may be whatever version of GI is used, it has nothing to do with the license?
I have heard that I can upgrade Grid Infrastructure, but to Standard Edition. Does GI also comes with SE and also just want to know that can I perform this upgrade?
2 Node RAC Prod. GI= 11.2..0.1 , DB = 10.2.0.4 SE
I want to upgrade (out of place) Grid Infrastructure to latest version of 11.2.0.3 and then PSU on top of that.
GI HOME and DB HOME are separated. Database I want to upgrade later on, not with this clusterware upgrade. I have download p10404530_112030_Linux-x86-64_3of7.zip from MOS for upgrading GI.
grid@db1p [rec]: /home/grid > crsctl query crs softwareversion
Oracle Clusterware version on node [db1p] is [11.2.0.1.0]
grid@db1p [rec]: /home/grid > crsctl query crs activeversion
Oracle Clusterware active version on the cluster is [11.2.0.1.0]grid@db1px [ec]: /home/grid > sqlplus / as sysasm
[code]....
1) Is this the correct p10404530_112030_Linux-x86-64_3of7.zip to upgrade GI from 11.2.0.1 to 11.2.03?
2) Do I need a COMPLETE DOWNTIME to upgrade GI on 2 node RAC where DB is STANDARD EDITION but Clusterware is 11.2 as you have seen above..
3) Will this ASM version will also be upgraded along with GI upgrade installer or it must be upgrades separately after GI Upgrade?
When I use 'ONSCTL PING' to test the ons status, it says: configure localport and remoteport directives and attempt to start ONS server again.ons is not running.The content of D:app11.2.0gridopmnconfons.config is:
localport=6100 # line added by Agent
allowgroup=true
usesharedinstall=true
remoteport=6200 # line added by Agent
nodes=rac1:6200,rac2:6200 # line added by Agent
The content of D:app11.2.0gridopmnconfons.config.rac2 is:
localport=6100 # line added by Agent
allowgroup=true
usesharedinstall=true
remoteport=6200 # line added by Agent
nodes=rac1:6200,rac2:6200 # line added by Agent
The configuration file is almost the same in rac1.But the output of 'srvctl status nodeapps' is :
ons is enabled
ons is running on node1:rac1
ons is running on node2:rac2
i am new to linux os . the step by step process of oracle database 10gR2 and oracle 10g client installation in linux os
View 6 Replies View RelatedSQL>startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/db_1/dbs/initora11g.ora'
Unfortunately I can not find initora11g.ora
[oracle@localhost db_1] cd dbs
[oracle@localhost dbs] ls
hc_orcl.dat init.ora lkORCL orapworcl spfileorcl.ora
so create pfile from spfile='/home//oracle/product/11.2.0/db_1/dbs/spfileora11.ora will not work
[oracle@localhost dbs]$ ls
hc_orcl.dat init.ora lkORCL orapworcl spfileorcl.ora
I don't see initora11g.ora file - as shown above in oratab also - it showed sid as orcl but I changed into
I have set oracle_sid = ora11g in .bash_profile as well
I am new to linux OS i don't know how to install forms in linux.
the step step process of installation of forms 10g in linux OS.
tried to mount a big endian asm disk (AIX for example) on little endian env (linux x86)? I have a disk that KFED is able to read but ASM is unable to mount it due to endianess incompatibility.
from the KFED read: kfbh.endian: 0 ; 0x000: 0x00kfbh.hard: 130 ; 0x001: 0x82kfbh.type: 1 ; 0x002: KFBTYP_DISKHEADkfbh.datfmt: 1 ; 0x003: 0x01kfbh.block.blk: 0 ; 0x004: blk=0kfbh.block.obj: 128 ; 0x008: file=128kfbh.check: 1999209486 ; 0x00c: 0x7729840ekfbh.fcn.base: 0 ; 0x010: 0x00000000kfbh.fcn.wrap: 0 ; 0x014:
[code]...
We try to upgrade the 10g to 11g oracle instance and asm instance.Below steps we r done;
1)First we are install the 11.2.0.3 database and grid infrastructure in separate home.
2)after that i try to upgrade asm instance so i drop old 10g asm localconfig cd $ORACLE10g_HOME./localconfig deletecd $ORACLE11g_HOME./localconfig add but here i can not find localconfig Note:database and grid installed without error....
3)Even we are try dbua but it run 10g dbua we are not able to run dbua for 11g
4)inventory is corrupted how to recreate inventory
5)provide the steps for upgrade 10g asm to 11g asm
Can I use 64 bit OS (Solaris x86) in my PC with VMware. As many software available in 64 bit but not in 32bit.
If I install 64 bit OS , Oracle DB whether it can crash the system or not
I'm a long time Oracle DBA but have only recently started with RAC and have never done any patching or upgrades in a RAC environment.
My environment consists of a 2 node RAC cluster, and 2 physical standbys at separate remote locations.
The database, GI, ASM, and clusterware are all at version 11.2.0.1.
I want to upgrade all components to the latest patchset which is 11.2.0.3. Eventually I also want to apply the latest PSU.
Can I do this without down time? It is a mission critical database where downtime could conceivably endanger lives. If it can't be done with zero downtime, then downtime must be kept to an absolute minimum (minutes, not hours).
I suspect the clusterware needs to be patched first and I do not know whether I can do it on one node at a time.
I need some professional article about how to configure DNS for using Oracle GNS with explanation.
I want to understand the role of DNS server for GNS.
I tried to search but what I found is not enough or they are not written with accuracy.
I'm installing Oracle RAC 11.2.0.3 on RHEL6.3. Since the asmlib RPMs are not provided any more (for RHEL6) I am now able to use either a whole disk or a partition.
which method is the better one, what are the advantages and disadvantages of these methods?
ENV: Oracle 10g R2 EE on ADM, RHEL 5.8 64bit
Is there a difference performance wise if ASM gets two LUNs of 1.7TB (DATA) and 0.6TB (FRA) respectively compared to 17 LUNs of 100GB each (for DATA) and 6 LUNs of 100GB each (for FRA)? Is there a recommended size from Oracle?
Here we are going to configure a new set up on new hardware :
clients requirements :
oracle 11g with ASM :
Number of instance = Single database
Platform = IBM AIX 6.1
I would like to know, if SCAN IP can be used by clients or applications to FTP files to either of the database nodes?
View 3 Replies View RelatedI am trying to install OEM but the GUI asks for weblogic server home.i checked many documents in net but none has weblogic installation procedure. Is it the sequence of installation ?
View 2 Replies View Related