OWB Mapping (Oracle 11gr2 Centos Linux) Deduplicator Cannot Contain LOB Type Columns
Dec 29, 2010
We are using Oracle 11gr2,centos linux.
In the OWB mapping,I needed to transfer data in lob table1 to lob table2 .Both tables are in 2 different schema.The table1 has blob and clob columns.The table 2 has same structure like table 1 and the table 2 is empty.
I have created the mapping and connected directly from the source table to the target table.Also , I have created a error table for the target table table. As for the data rule method,I customized the error table to log the non unique rows.
When I start validating the mapping . I got the following error
VLD-3200 Deduplicator cannot contain LOB type columns
How to log the error in error table for transferring lob type table1 to lob type table 2
View 2 Replies
ADVERTISEMENT
Aug 24, 2012
i have installed oracle 11gr2 on centos 4.7,,but after that when i invoke command for startup in sqlplus for sys user it shows an insufficient privileges error. and what are the post installation tasks? is the database installed also?what is the name of database and where is it?
View 5 Replies
View Related
Nov 1, 2010
I am trying to install ORACLE 11gR2 RAC on CentOS 5.5 .
when run root.sh on first node. I am gettign 2/3 failed command lines but the end went successful
=======================================================================
ohasd is starting
ADVM/ACFS is not supported on centos-release-5-5.el5.centos
...
add nodeapps -n perflabhp03 -A perflabhp03-vip/255.255.254.0/eth0 on node=perflabhp03 ... failed
...
PRCR-1001 : Resource ora.net1.network does not exist
add scan=perflab-cluster-scan ... failed,
Configure Oracle Grid Infrastructure for a Cluster ... failed
...
'UpdateNodeList' was successful.
=========================================================================
Because of this output, when see the ./crsctl stat res -t , it showing LISTENER offline for perflahp03, and I can not see any status line for "perflabhp03-vip " and "Scan-listener".
Do I need to reinstall the entire cluster setup because of VIP issue?
View 1 Replies
View Related
Jun 22, 2012
Question: to migrate from oracle 10gR2 in Windows to oracle 11gR2 in Linux . Steps are:
1. need to expdp all schemas/users from oracle 10gR2 in Windows,
2. then impdp each schema/user into oracle 10gR2 in Linux first,
3. then upgrade the oracle 10gR2 in Linux to oracle 11gR2 in Linux ?
4. Do I need to pre-create all the same tablespaces first in oracle 10gR2 in Linux ?
Is it correct ? or I can migrate straight all schemas/users from oracle 10gR2 in Windows to oracle 11gR2 in Linux using impdp ?
View 5 Replies
View Related
Jan 11, 2011
I need to setup Oracle 11gR2 single node @ Linux RHat 5 64-bit for long performance tests, huge loads, high speeds, a lot of transactions, having a good scalability, etc.
It's not a production server, but for strong system/volume tests.
CPU
Motherboard
Memory
HDD
Network
View 2 Replies
View Related
Aug 27, 2013
we are busy updating one databasee from a windows platform 2003 oracle 10G to a linux and oracle 11r2
We exported/imported the data and it looks ok Explain plans look the same . but our heavy batches are twice slower than on the windows box ,the two top events are disk related, sequential and scattered reads there are 90% of the time of the batch job , i read some white paper and found that using ASM can be bad in some cases the same with the linux for this particular kind of scattered reads , i was just wondering if just changing the SGA to 10GB instead of 4GB to get more cache and speedup the things .
View 3 Replies
View Related
Feb 23, 2011
We have 2 node cluster with 10.2.0.4 home and 11.2.0.2 home under 11gr2 grid infrastructure with ASM in LINUX environment. We are planning to add 3rd node to this cluster. Is there any issues to add 3rd node to existing environment or running fine.
View 2 Replies
View Related
Feb 3, 2013
am trying to install rac 11gr2 config on linux 5.5 on vmware server.
following doc:
[URLs]...
but as in the first step VMware Server Installation:First, install the VMware Server software. On Linux you do this with the following command as the root user.
# rpm -Uvh VMware-server*.rpm
i couldn't find any where on linux disks.
View 2 Replies
View Related
Jan 21, 2011
I have a two question.
Question 1:How to select all columns from table except those columns which i type in query
Question 2:How to select all columns from table where all columns are not null without type each column name which is in empty data
View 5 Replies
View Related
Aug 3, 2012
I install oracle 11g2 on centos, in prerequisite checks step ,oracle database show this failed "Oracle Restart integrity Failed", I don't know what should i do ?
View 2 Replies
View Related
May 25, 2013
I want to imopert excel data by coloumn mapping to oracle table using forms 6i". for this I've created a form which is having following details.
1. path, file name text field and button called browse. when the form load. click on browse botton, and user will be asked to go to specific drive and select the excel file. The file path is stored in path text field and file name is displayed on file name text field.
2. After doing this I've porvide a button called column. after selecting the file click on column button. Once the button is pressed all column heading of the selected excel file get displayed on the text fields which i've provide on the form.
3. In frot of each column headig field I've provide list box which contains database table column heading. Now user have to select table column according to his excel column. (i.e I am asking user to map his excel column with oracle table column.)
4. Once the maping from user is done, I've provide button called process. once the button is pressed all the data from excel is to get insert in to database colmum.
what i've achive -
- User is able to select file path and file name get displayed.
- Columns heding of excel get displayed on the form.
problem area
-In the process button code column heading get change dynamically but records i.e actual data does not.
-I am able to insert records into table, but only when excel column heading sequence is same as database table column.
excel column = table column
-----------------------------------------------------------------
route = route
date = del_date
time = del_time
id = tran_id
In above situation record get insert into table. But when only excel column sequence change that time data is not inserted into table. If required i can upload my form and sample excel sheet also provide table script.
View 4 Replies
View Related
Mar 25, 2010
I have created a object type as
create type emp_obj_dtl as OBJECT (ename varchar2(50),mgr NUMBER)
create type emp_dtl_obj_typ as TABLE of emp_obj_dtl
Using the these object i have created on function as
CREATE OR REPLACE FUNCTION emp_test_func (peno NUMBER)
RETURN emp_dtl_obj_typ
AS
lv_emp_dtl emp_dtl_obj_typ := emp_dtl_obj_typ ();
BEGIN
SELECT emp_dtl_obj_typ(emp_obj_dtl (ename, mgr))
INTO lv_emp_dtl
FROM emp
WHERE empno = peno;
RETURN lv_emp_dtl;
END;
Now if i am executing query as
SELECT empno, emp_test_func (empno) emp_dtls
FROM emp
It is returning me the data as
EMPNO | EMP_DTLS
7500 | (DATASET)
7382 | (DATASET)
7569 | (DATASET)
7800 | (DATASET)
But I want the result set as
EMPNO | ENAME | MGR
7500 | SMITH | 7863
7382 | JAMES | 7896
7569 | KING | 7856
7800 | SANGR | 7456
How to get the resultset as above.
View 4 Replies
View Related
Mar 1, 2013
I have requirement on table type. without using bulk or %rowtype is there any possible to create table type with two or more columns.
I got with single column,but I am unable to create with multiple columns.
DECLARE
TYPE T1 IS TABLE OF NUMBER INDEX BY BINARY_INTEGER;
T T1;
CNT NUMBER:=0;
BEGIN
FOR I IN 1..100 LOOP
CNT:=CNT+1;
[code]....
View 7 Replies
View Related
Jan 2, 2013
I have 3 user defined collection types. I am trying to access the type3's attribute in type1 body (like backward accessing).
Ex. My Collection Types Structure (something like master detail structure)
create type type1 as object
(
attr1 varchar2(10),
attr2 varchar2(10),
member procedure function1
[code]...
so, in the type1 body i have to get or assign the value either to type2's attribute or type3's attribute. I have search all the in internet but i haven't find anything such. how to find the reverse method of accessing the super type's attribute(s) in sub type's body.
View 3 Replies
View Related
Mar 8, 2013
I have created the below types and oracle objects.
create or replace type T_EMA_NP_SETDEL_RESP_REC as object
(
respCode number,
respDesc varchar2(255)
)
create or replace type T_EMA_NP_RANGE_LNPTICKET_TAB AS TABLE OF T_EMA_NP_RANGE_LNPTICKET_REC
create or replace type T_RANGE_TICKET_TAB AS TABLE OF T_RANGE_TICKET_REC
The following types are created in the Package specification
type t_resp_rec IS RECORD
(
resp_code number,
resp_desc varchar2(255)
);
--
subtype t_ema_lnpticket is T186_IN_REQ_PARAMETER.T186_EMA_LNPTICKET%TYPE; -- Number
type t_ema_lnpticket_tab is table of t_ema_lnpticket index by binary_integer;
I have the following two procedures
PROCEDURE getEMAReturnResponse(
p_in_call_request_id IN number,
p_ema_resp_rec IN t_ema_np_setdel_resp_rec,
p_ema_range_lnpticket_tab IN t_ema_np_range_lnpticket_tab,
p_endof_event IN varchar)
PROCEDURE Return_Response(p_in_call_request_id IN number,
p_ema_resp_rec IN t_ema_resp_rec,
p_ema_lnpticket_tab IN t_ema_lnpticket_tab,
p_endof_event IN varchar2)
getEMAReturnResponse Procedure:
Accessed by Java application to pass the values. Should call the Return_Response procedure and pass the values received from Java.
Return_Response Procedure
The p_ema_lnpticket_tab is a sort of array that can have multiple values. Please see the example of values. Has all the business rules and validation that should be adhered.
Example of Vaules
p_in_call_request_id = 1
p_ema_resp_rec = 12345, 'Operation Failed'
p_ema_lnpticket_tab = (1,2,4,5)
p_endof_event = Y
View 2 Replies
View Related
Mar 8, 2013
I have created the below types and oracle objects.
create or replace type T_SETDEL_RESP_REC as object
(
respCode number,
respDesc varchar2(255)
)
--
create or replace type T_EMA_NP_RANGE_LNPTICKET_REC as object
(
ticket number
)
create or replace type T_RANGE_TICKET_TAB AS TABLE OF T_RANGE_TICKET_REC
The following type is created in the Package specification
type t_resp_rec IS RECORD
(
resp_code number,
resp_desc varchar2(255)
);
I have the following two procedures
Procedure getResponse(p_call_request_id IN number, p_resp_rec IN t_setdel_resp_rec,
p_range_ticket_tab IN t_range_icket_tab, p_endof_event IN varchar)
PROCEDURE ProcessResponse(p_call_request_id IN number, p_resp_rec IN t_resp_rec,
p_ticket_tab IN t_ticket_tab, p_endof_event IN varchar2)
The get Response procedure is a wrapper procedure exposed to Java to pass values. The Process Response procedure is a main procedure where all logics and business rules are handled.
The Problem is:
How can I pass the values from get Response procedure to Process Response procedure. So that rules and validations are applied. Please note the p_ticket_tab may have many ticket numbers corresponding to p_call_request_id.
Values E.g. :
p_call_request_id = 1
p_resp_rec (1234, 'Error found')
p_range_ticket_tab (1,2,3,4,5)
p_endof_event = 'Y'
View 7 Replies
View Related
Apr 19, 2012
Can I install the oracleASM in centOS 6?
My kernel version is 2.6.32.
And the last version for oracleasm release is 2.6.18-308.1.1.el5. [URL] And they aren't compatible...
Are there any way to install these lib with this kernel version? (2.32...)?
View 1 Replies
View Related
Jul 5, 2013
I have a two different Databases. I created a db link in DB 1 to connect to DB 2 and it is working fine when I select data from any table. but I have one table in the DB2 which has a column with user defined data type . so when I try to select this column from DB 2 by using the DB link it gives me this error :ORA-22804 remote operations not permitted on object tables or user-defined type columns.
View 1 Replies
View Related
Dec 26, 2012
How set the registery path under forms6i in Centos
View 4 Replies
View Related
Aug 8, 2012
We would be moving oracle 11g unix sun solaries to oracle 11g Linux readhat OS. what would be the disadvantage and what are the item needs to be verified. Basically advantage of oracle 11g Linux readhat OS.
View 2 Replies
View Related
Aug 29, 2008
however im taking database size into account. i believe there has to be some sort of medium when it comes to infrastructure and performance.
this is specific to tables which map other tables. these tables that im creating usually consist of only 4 columns. 3 columns are mapped ids and the other a date in field. the 3 columns need to be indexed because they are used in joins within views. also those fields in the other tables are indexed as well.
View 2 Replies
View Related
Apr 27, 2012
I have a OWB mapping which takes input from a staging table and add those row to the Cube. The underlying table behind cube is a relational fact table joined with the dimensions using foreign keys. Explain plan behind the query has a rather high cost and the mapping runs for 30 minutes. If you see below, in step 17, the cost goes up to 1,396,573 which is also where nested loops start to appear. Query plan is also attached in the image format.
Plan
SELECT STATEMENT ALL_ROWSCost: 1,746,526,275 Bytes: 386,835,904 Cardinality: 464,947
46 NESTED LOOPS OUTER Cost: 1,746,526,275 Bytes: 386,835,904 Cardinality: 464,947
41 NESTED LOOPS OUTER Cost: 1,744,200,663 Bytes: 380,791,593 Cardinality: 464,947
37 NESTED LOOPS OUTER Cost: 1,743,270,415 Bytes: 374,747,282 Cardinality: 464,947
34 NESTED LOOPS OUTER Cost: 1,740,476,128 Bytes: 368,702,971 Cardinality: 464,947
29 NESTED LOOPS OUTER Cost: 1,739,545,862 Bytes: 362,658,660 Cardinality: 464,947
25 NESTED LOOPS OUTER Cost: 1,710,193,475 Bytes: 356,614,349 Cardinality: 464,947
[code].........
View 1 Replies
View Related
May 24, 2013
Using oracle forms 6i i want to carray out following task.
suppose i've table with following fields namely
loc_id, del_date, del_time, del_id
and i've excel sheet with following details
dateiddtimedid
---------------------------------------------------------------------
20-03-13 loc120:30:45RDT-01
25-03-13 loc215:25:30RTD-02
26-03-13 loc310:15:20RTD-03
want to import this excel data to my oracle table but l_id in my table is in first place but in excel sheet it is in second place, del_date in my table is in second place but in excel sheet it is in first place.
next time i may get excel sheet which will be like this
did lid date dtime
--------------------------------------------------------------------------------
DEL-01loc1 20-03-1320:30:45
DEL-03loc2 25-03-1315:25:30
This excel sheet also have different oreder than my database table and i want to import it to my database table using forms 6i. yes, i suppose to use ole2 package but my problem is how to map the columns.
I've already design a form i required i can attach it or provide screen shot of the same.
View 1 Replies
View Related
Feb 18, 2008
I have a problem with getting '|' sign in TOAD Editor. It is default for Croatian keyboard layout that I get '|' sign when I press Alt_gr+W key combination.
But in Toad, when I press Alt_gr+W combination Watches dialog is opened.I want to get '|' sign in Toad Editor when I press Alt_gr+W.
View 9 Replies
View Related
Jan 20, 2011
I am unable to configure EM(Oracle 11.2g) on Redhat Linux 5 Enterprise edition(32 bit). Environment variables are set to correct SID. If I try to run dbca the wizard does not display the Enterprise manager configuration screen. I have tried to create repository by using emca -config dbcontrol -db config.
But it throws exception that database instance is unavailable?
View 5 Replies
View Related
Feb 25, 2012
how to install oracle on Linux.
View 2 Replies
View Related
Jul 25, 2012
SQL>startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.2.0/db_1/dbs/initora11g.ora'
Unfortunately I can not find initora11g.ora
[oracle@localhost db_1] cd dbs
[oracle@localhost dbs] ls
hc_orcl.dat init.ora lkORCL orapworcl spfileorcl.ora
so create pfile from spfile='/home//oracle/product/11.2.0/db_1/dbs/spfileora11.ora will not work
[oracle@localhost dbs]$ ls
hc_orcl.dat init.ora lkORCL orapworcl spfileorcl.ora
I don't see initora11g.ora file - as shown above in oratab also - it showed sid as orcl but I changed into
I have set oracle_sid = ora11g in .bash_profile as well
View 1 Replies
View Related
Nov 18, 2012
share with me a linnk of oracle 11g client on RHEL 5 32 bit due to i search in oracle web site and found only 64 bit URL.....share with me a link of installation guide of this client?
View 4 Replies
View Related
Jul 18, 2013
link where can i get oracle 9i for Linux OS??Is 9i available for 64 bit ?
View 4 Replies
View Related
Oct 22, 2012
I have installed oracle enterprise linux 6.2 on my laptop, and I installed the database 11gR2 on it, know the user account I used to log in with (os level) is not accessible any more :
[URL].........
if I remove the account and recreate it does it will cause problems to the database?
View 5 Replies
View Related
