ORA-22804 Remote Operations Not Permitted On Object Tables Or User-defined Type Columns?
Jul 5, 2013
I have a two different Databases. I created a db link in DB 1 to connect to DB 2 and it is working fine when I select data from any table. but I have one table in the DB2 which has a column with user defined data type . so when I try to select this column from DB 2 by using the DB link it gives me this error :ORA-22804 remote operations not permitted on object tables or user-defined type columns.
I need to transfer PL/SQL or NESTED table from LOCAL database to REMOTE.I need to be able to use that transfered table in SELECT statement.I tried:
--ON LOCAL SELECT SYS_OP_GUID() FROM DUAL; --966D2DFEAEEB80D6E0430A0166CB80D6 create or replace type varchar_number_oid OID '966D2DFEAEEB80D6E0430A0166CB80D6' as object ( v varchar2(10), i number); / Type created SELECT SYS_OP_GUID() FROM DUAL; --966D2DFEAEFB80D6E0430A0166CB80D6 [code]....
I tried using PL/SQL types it worked, but then i have a problem that i can not use local collection in SQL.
While practicing with Triggers, the following error was encountered. An Object Type and an object Table are created.
create or replace type typPerson is object (id number, firstname varchar2(30), lastname varchar2(30) [code].........
I executed the below insert statement, and I got the following error.
SQL> insert into person_obj_tab values (10,'Object1','From Trigger'); insert into person_obj_tab values (10,'Object1','From Trigger') * ERROR at line 1: ORA-03113: end-of-file on communication channel Process ID: 4153 Session ID: 136 Serial number: 305 [code]......
SQL> insert into person_obj_tab values (10,'Object','Original');
1 row created.Question:
1) Trigger of version 1 did not report any error during compilation, but during DML execution, hangs for sometime and gives the above error. 2) Whether direct assignment of Objects of greater size is possible inside triggers built on object Tables? 3) Suppose an object contain multiple attributes (say more than 20), then how to assign them inside a trigger?
How can I reference an Object Type created on a remote database?This is the escenario:
In DATABASE A: CREATE OR REPLACETYPE USERA.EXPO_EXPEDIENTES_RECAUDOS OID 'DCADCB2EA2344DFAB1D205C03D708359' AS OBJECT ( exer_cd_expediente VARCHAR2 (50), exer_id_ident_expediente VARCHAR2 (30), exer_cd_sucursal NUMBER (3), exer_cd_ramo NUMBER (2), exer_nu_poliza NUMBER (7), exer_nu_certificado NUMBER (9), exer_nu_contrato NUMBER (7), exer_cd_nacionalidad VARCHAR2 (1), exer_nu_cedula_rif NUMBER (9), exer_nm_titular VARCHAR2 (70), exer_st_expediente VARCHAR2 (2), exer_de_status_exp VARCHAR2 (240), exer_fe_status_exp DATE, exer_cd_productor NUMBER (5), exer_nm_productor VARCHAR2 (60), exer_cd_mail_productor VARCHAR2 (50), exer_in_habilitado VARCHAR2 (1), exer_in_permite_habilitar VARCHAR2 (1), exer_in_carga_consulta VARCHAR2 (1), exer_cd_ramo_aplicacion VARCHAR2 (200), exer_cd_producto VARCHAR2 (6) )/ In DATABASE B:
After creating the public synonym and asigning the required privileges on the object in DATABASE A, I try to execute the following:
DECLARE x EXPO_ EXPEDIENTES_RECAUDOS;BEGIN null;END;
But i got the following error:
ORA-06550: line 2, column 12:PLS-00331: illegal reference to
USERA. EXPC_ EXPEDIENTES_RECAUDOS@DATABASEA
After investigating a little i found the following, but i dont know how to apply it, "The CREATE TYPE statement has an optional keyword OID, which associates a user-specified object identifier (OID) with the type definition. It should be used by anyone who creates an object type that will be used in more than one database."
I am trying to create & use a new data type but keep getting a ora-0902 invalid data type error running on 10g express. The create type and select statements execute fine and select confirms the ssn_t is a type. The create table statement fails with the invalid data type error.
Here is an example.
CREATE TYPE ssn_t AS OBJECT ssn_type CHAR(11)); SELECT object_name, object_type FROM user_objects WHERE object_type = 'TYPE'; CREATE TABLE Z (A CHAR(4), B SSN_T);
That is I have created the User Defined Data Type as following. CREATE OR REPLACE TYPE Bit_Type AS OBJECT(Bit NUMBER(1,0));
After completing this creation of new UDT, I am trying to create the table with this UDT as follows, CREATE OR REPLACE TABLE Sample_Bit ( RegID Bit_Type);
I received an Error Message like: SQL Error: ORA-22913: must specify table name for nested table column or attribute 22913. 00000 - "must specify table name for nested table column or attribute" *Cause: The storage clause is not specified for a nested table column or attribute. *Action: Specify the nested table storage clause for the nested table column or attribute.
Through sql*plus, how can I copy a user-defined type from other schema to mine?
I've granted the execute object privilege over the user-defined type to my user, so I can use the type.
I know I can manually write and create the type, but I wanna learn (if exist) a statement to copy the user-defined type, something like: CREATE TABLE x2 AS (SELECT * FROM x1);
I'm testing ORACLE DATABASE 11g R2 over Windows O. S.
I have this requirement, I have a following Record type within a package, instead of selecting datas into this i need to assign variables to this record type
TYPE xx_delivery_detail_rectype IS RECORD ( p_delivery_id NUMBER, p_ultimate_dropoff_location_id NUMBER, p_creation_date DATE, p_last_update_date DATE, p_container_name VARCHAR2 (30), p_inventory_item_id NUMBER, p_shipped_quantity NUMBER, p_shipment_line_id NUMBER ); TYPE xx_delivery_table_rectype IS TABLE OF xx_delivery_detail_rectype INDEX BY BINARY_INTEGER;
Say i have variables to assign to all the values within the record type, How do i do it within the package
create type emp_obj_dtl as OBJECT (ename varchar2(50),mgr NUMBER) create type emp_dtl_obj_typ as TABLE of emp_obj_dtl
Using the these object i have created on function as
CREATE OR REPLACE FUNCTION emp_test_func (peno NUMBER) RETURN emp_dtl_obj_typ AS lv_emp_dtl emp_dtl_obj_typ := emp_dtl_obj_typ (); BEGIN SELECT emp_dtl_obj_typ(emp_obj_dtl (ename, mgr)) INTO lv_emp_dtl FROM emp WHERE empno = peno;
RETURN lv_emp_dtl; END;
Now if i am executing query as
SELECT empno, emp_test_func (empno) emp_dtls FROM emp
I have an Type-object typeObj1 that consists another Type-object typeObj2. this def has another Type-object typeObj3. how to access variable declared inside typeObj3. I have syntax below for each Type.
CREATE OR REPLACE TYPE typeObj1 AS OBJECT ( SYSTEM_IDENTIFER VARCHAR2(50), PROCESS_TYPE VARCHAR2(50), abc typeObj2
) /
[Code]...
/I have tried to access the type-object in where clause in following way
FROM TABLE(CAST(I_typeObj1 AS typeObj1)) ITTPRC, ...... Where ....... AND (ADDKEY.ADDTN_INFO_KEY_TYP_NM IN (SELECT ADDTN_INFO_KEY_TYP_NM FROM TABLE(ITTPRC.abc)))
AND (ADTINF.ADDTN_RQST_TYP_VAL_DT IN (SELECT ADDTN_RQST_VAL_DT FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL ) AND (ADTINF.ADDTN_RQST_TYP_VAL_NUM IN (SELECT ADDTN_RQST_VAL_NUM FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL ) AND (ADTINF.ADDTN_RQST_TYP_VALUE IN (SELECT ADDTN_RQST_VALUE FROM TABLE( ITTPRC.def)) OR ITTPRC.def IS NULL )
In this way i am able to access the variable inside typeObj3. But problem is i am getting error "ORA-01427 single-row subquery returns more than one row" when i pass more that one typeObj2.
I have enabled Auditing in my oracle Database but I am not able to see any database for the operations of sys user or any other user in my "SYS.AUD$" and "SYS.FGA_LOG$" tables.
Value for the parameter "AUDIT_TRAIL" is set to "db,extended".
I am working as "SYS" user and I have shutdown and again startup the database but neither there was any information in both the tables nor I can see any files at the destination specified by "AUDIT_FILE_DEST".
I have created the below types and oracle objects.
create or replace type T_EMA_NP_SETDEL_RESP_REC as object ( respCode number, respDesc varchar2(255) )
create or replace type T_EMA_NP_RANGE_LNPTICKET_TAB AS TABLE OF T_EMA_NP_RANGE_LNPTICKET_REC create or replace type T_RANGE_TICKET_TAB AS TABLE OF T_RANGE_TICKET_REC
The following types are created in the Package specification
type t_resp_rec IS RECORD ( resp_code number, resp_desc varchar2(255) ); -- subtype t_ema_lnpticket is T186_IN_REQ_PARAMETER.T186_EMA_LNPTICKET%TYPE; -- Number type t_ema_lnpticket_tab is table of t_ema_lnpticket index by binary_integer;
I have the following two procedures
PROCEDURE getEMAReturnResponse( p_in_call_request_id IN number, p_ema_resp_rec IN t_ema_np_setdel_resp_rec, p_ema_range_lnpticket_tab IN t_ema_np_range_lnpticket_tab, p_endof_event IN varchar)
PROCEDURE Return_Response(p_in_call_request_id IN number, p_ema_resp_rec IN t_ema_resp_rec, p_ema_lnpticket_tab IN t_ema_lnpticket_tab, p_endof_event IN varchar2)
getEMAReturnResponse Procedure:
Accessed by Java application to pass the values. Should call the Return_Response procedure and pass the values received from Java.
Return_Response Procedure
The p_ema_lnpticket_tab is a sort of array that can have multiple values. Please see the example of values. Has all the business rules and validation that should be adhered.
Example of Vaules p_in_call_request_id = 1 p_ema_resp_rec = 12345, 'Operation Failed' p_ema_lnpticket_tab = (1,2,4,5) p_endof_event = Y
I have created the below types and oracle objects.
create or replace type T_SETDEL_RESP_REC as object ( respCode number, respDesc varchar2(255) ) -- create or replace type T_EMA_NP_RANGE_LNPTICKET_REC as object ( ticket number ) create or replace type T_RANGE_TICKET_TAB AS TABLE OF T_RANGE_TICKET_REC
The following type is created in the Package specification
type t_resp_rec IS RECORD ( resp_code number, resp_desc varchar2(255) );
I have the following two procedures
Procedure getResponse(p_call_request_id IN number, p_resp_rec IN t_setdel_resp_rec, p_range_ticket_tab IN t_range_icket_tab, p_endof_event IN varchar)
PROCEDURE ProcessResponse(p_call_request_id IN number, p_resp_rec IN t_resp_rec, p_ticket_tab IN t_ticket_tab, p_endof_event IN varchar2)
The get Response procedure is a wrapper procedure exposed to Java to pass values. The Process Response procedure is a main procedure where all logics and business rules are handled.
The Problem is:
How can I pass the values from get Response procedure to Process Response procedure. So that rules and validations are applied. Please note the p_ticket_tab may have many ticket numbers corresponding to p_call_request_id.
I've the following function returning OBJECT type. how to call this function
CREATE OR REPLACE TYPE GET_EMP_OBJ is object ( emp_name varchar2(50) , mgr_id number, dept_id number );
[Code]...
The above function got created successfully. And i'm confused how to call this functions. I tried like below but didn't work
DECLARE t_emp_info_1 GET_EMP_OBJ ; BEGIN t_emp_info_1 := get_emp(7566) ; for i in 1..t_emp_info_1.COUNT LOOP DBMS_OUTPUT.put_line ('Values are'||i.emp_name ) ; END LOOP; END;
I have been creating lot many threads around the same problem, however i thought i knew but realized I do not know or else do not know how to. I have created object type with an attribute READINGVALUE NUMBER(21,6)...How can i use type attribute on this object while declaring variable.....can we use type attribute on NESTED TABLES, similar to the db tables?
example CREATE TYPE READING AS OBJECT(READINGVALUE NUMBER(21,6)); CREATE TABLE INTERVALREADINGS OF TYPE READING;
In the example below I believe I have created a Nested Table of PL/SQL type and have tried various references to get the SET operation to work, line containing MEMBER OF. Taking the example below from the oracle documentation I have two questions.
1) As I understand it I should be able to use SET operations on Nested tables of PL/SQL types, (I am not using the CREATE OR REPLACE DDL statement prior to the DECLARE block.). Is this correct? 2) I am assuming that I have to reference the record, can I reference by its type / row instance or can I only retrieve the record like a Cursor Fetch solution, (which would defeat the purpose.).
As a part of requirement need to clean up some of database objects from database. Before cleaning up need to check for dependencies with in database and also on remote database.
Is there any data dictionary in oracle which proivides information about remote dependencies.
Any other way to get a list of remote dependencies other then manual checking.
Is it possible to easily set up a single User Defined Metric, to monitor all the users quotas? I know I can do it, if I make individual metrics for each user. But was hoping there was a simple way of combining them all into a single metric.
I am using Oracle 10G2 Standard Edition on a windows 2003 Server.
I'm calculating a Z score based on some simple numerical data thus:
create table t (id number, val number);
insert into t values(1, 1795); insert into t values(2, 1753); insert into t values(3, 1743); insert into t values(4, 1876); insert into t values(5, 1848);
[Code] .....
the logic is quite simple - calculate a moving average over the previous 12 rows, and a stdev over the same window. Then subtract the prior row's moving average from the current value, and divide by the prior row's stdev.
The issue is I want to expose this logic in a BI tool (OBI EE v10g), meaning I can't use the nested analytic functions. How to achieve this logic in a single analytic pass? The sql above took about 2 minutes to write this morning, then I've spent all day looking at user-defined aggregate functions, but haven't even been able to get the first step, the moving average, working. I can understand that I can probably create an udaf to replicate the avg(val) over (order by id ROWS BETWEEN 11 PRECEDING AND 0 FOLLOWING) functionality, but I can't see how to bundle the logic for the other three steps in the calculation into this.
From what I've read, the ODCIAggregateMerge should allow me to combine different threads that can return the different values I need for the current row calculation. Is this correct?
The only example udafs I can find are either not relevant (STRAGG) or very simple (ie don't appear to invoke multiple passes). I've also had a look at the COLLECT function, but again I can't see a way to use this.
I have designed a Login form which takes username, password and connect string is hardcoded.I have compiled it, made an fmx file. created a shortcut to desktop. given the BIN path in shortcut.
when i want to lauch it, oracle's default login popup is shown.It can be by passed while defining username/password@string in shortcut properties but it reveals the password. every one can access it. I want to launch my own form without logging in to oracle. how can i avoid default login popup?
