I install oracle 11g2 on centos, in prerequisite checks step ,oracle database show this failed "Oracle Restart integrity Failed", I don't know what should i do ?
View 2 Replies
i have installed oracle 11gr2 on centos 4.7,,but after that when i invoke command for startup in sqlplus for sys user it shows an insufficient privileges error. and what are the post installation tasks? is the database installed also?what is the name of database and where is it?
View 5 Replies View RelatedOS=Redhat 5
Oracle=11gr2
Grid=11gR2
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node.
Expected Value : n/a
Actual Value : n/a
List of errors:
- Permissons of file
"/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"]
- Cause: Cause of Problem Not Available
- Action: User Action Not Available.
We are using Oracle 11gr2,centos linux.
In the OWB mapping,I needed to transfer data in lob table1 to lob table2 .Both tables are in 2 different schema.The table1 has blob and clob columns.The table 2 has same structure like table 1 and the table 2 is empty.
I have created the mapping and connected directly from the source table to the target table.Also , I have created a error table for the target table table. As for the data rule method,I customized the error table to log the non unique rows.
When I start validating the mapping . I got the following error
VLD-3200 Deduplicator cannot contain LOB type columns
How to log the error in error table for transferring lob type table1 to lob type table 2
Oracle Restart 11.2.0.3 w/ASM. To improve redundancy we're planning to change the network configuration in our Oracle Restart environment from using 1 LAN interface to a bonded interface consisting of 2 interfaces.So the change will be from using "eth0" to using "bond0" consisting of "eth0" and "eth1". Are there any changes that must be done in the Oracle Restart configuration to reflect these changes?
View 7 Replies View RelatedI just finished my first course in SQL for Oracle 11g at my local community college. We used SQL*Plus for the coursework and for the next class I need to use SQL Developer. Initially, I installed the Developer and was unable to establish a test connection due to the listener not being installed. I fiigured out that I needed to use the Network Configuration Assistant to add and configure the listener. After doing so, I was able to connect using Developer. The issue, however, is that any time I restart my computer, the TNS Listener service disappears from the list of services in Task Manager and I have to delete and then add and configure the service again using Network Configuration Assistant. Obviously, the Listener still exists because I can delete it and then recreate it.
View 4 Replies View RelatedI am doing a upgrade from 10g2 standalone (with out ASM) to 11g2 2 node cluster (on ASM) and the database is some what 1TB of the size. My problem is if I do a export and import the live system need to be down for over an a day. is there a better way of doing this and how ?
View 6 Replies View RelatedI got following error on Oracle 10.2.0.4.0 RAC on solaris 10
Oracle clsomon failed with fatal status 12.
Oracle CRS failure. Rebooting for cluster integrity.
I think this problem in 11g but I am using 10g.
We are unable to connect our admin account for some unknown reason. We keep receiving the following message "Invalid Login Credentials". We tried to change the admin credentials with sqlplus. We tried the usual procedure "apxchpwd" successfully, but we still cannot log in.We then tried to create a new admin2 account with the following pl/sql block.
SQL> connect APEX_030200 as sysdba
Enter password:
Connected.
[code]....
We cannot connect with either admin & admin2.
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
View 25 Replies View RelatedCan I install the oracleASM in centOS 6?
My kernel version is 2.6.32.
And the last version for oracleasm release is 2.6.18-308.1.1.el5. [URL] And they aren't compatible...
Are there any way to install these lib with this kernel version? (2.32...)?
How set the registery path under forms6i in Centos
View 4 Replies View RelatedMy question is; I've been reading the Oracle database 11g R2 documentation at this link [URL]...
I passed a couple of days learning about all installation configuration parts including the desktop class and server class.As I was learning, So I had already downloaded Oracle Database Express 11g R2 for win32.
So as i had finished the installation guide I thought it's time to install the oracle now. I did it, and what I found was that there was not any option during installation that i read in above documentation. While trying to find about this difference i reached on documentation[URL]...
That is for express version only.
My question here is, Express edition, we use for learning purpose, But it doesn't look like it has all the stuff that we should learn during installation And what documentation I should follow from my above given two links?
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages.
[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.
I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005).
View 10 Replies View RelatedI am trying to install ORACLE 11gR2 RAC on CentOS 5.5 .
when run root.sh on first node. I am gettign 2/3 failed command lines but the end went successful
=======================================================================
ohasd is starting
ADVM/ACFS is not supported on centos-release-5-5.el5.centos
...
add nodeapps -n perflabhp03 -A perflabhp03-vip/255.255.254.0/eth0 on node=perflabhp03 ... failed
...
PRCR-1001 : Resource ora.net1.network does not exist
add scan=perflab-cluster-scan ... failed,
Configure Oracle Grid Infrastructure for a Cluster ... failed
...
'UpdateNodeList' was successful.
=========================================================================
Because of this output, when see the ./crsctl stat res -t , it showing LISTENER offline for perflahp03, and I can not see any status line for "perflabhp03-vip " and "Scan-listener".
Do I need to reinstall the entire cluster setup because of VIP issue?
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
View 2 Replies View RelatedAm planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
View 4 Replies View RelatedWhen i am trying to install oracle database 10g, it is giving following error.Error in writing to directory :
c:Users:
ensure that this directory is writable and has atleast 55MB of disk space ,installation cannot continue.
I have a trigger on insert which sets a :new field if it is net set.Basically:
CREATE OR REPLACE TRIGGER my_schema.T_OBS_BEF_IU
BEFORE INSERT OR UPDATE ON my_schema.OBS FOR EACH ROW
BEGIN
If :new.work_db is null Then
:new.work_db := my_package$PARAMETER.Get_label ('DEFAULT_WORK_DB'); -- function returning varchar2(200)
End if;
END;
/
It usually works fine. With jdbc, when the application insert a null value, the trigger replaces it with the good value.When the application can determine the non-null value, it is written in the table.
But when the trigger is restarted to a savepoint, due to a table lock, the second execution of this trigger goes wrong. The input :new.work_db value is not null anymore, nor has the correct value. Most of the time, it has the ascii 00 value (NUL), sometimes another weird character.
Do you know if my trigger code is correct, or if there would be some limitations ?
11g RAC environment, I manually shutdown the database with "shutdown immediate" and stop the listener with "lsnrctl stop". Later I manually startup only the database but the listener is also started automatically at almost the same.
Why would this happen ? I just don't want the listener to startup automatically at that time. What can i do to prevent the listener from auto-starting when i startup the database manually.
My database is shut down and I am not able to restart my database. I am getting Ora-00147 error in my database.
View 6 Replies View RelatedMy client get the error Ora-12514 when he tries to connect to the db.Well;
1) we restart the services: "OracleServiceOrcl" and listener but nothing changes
2) We restart the server and nothing changes
3) We checked the dump and he was done on March,26th. No db export yesterday. Is there any link with the clock change of this week-end (location of the server: France)?
4) The lsnrctl services listener command run successfully but it doesn't mention the instance ORCL.
Is there a way to restart emctl agent12 ? if yes, could you provide me the steps / command ?
View 11 Replies View RelatedI just shutdown the database and it seems to take a while, don't know if it's stuck or just takes awhile. I try to restart it in another session and get this error:
'ORA-01012: not logged on'
1) Shutdown
SQL> connect sys/Welcome1 as sysdba
Connected.
SQL> shutdown normal
_
2) So I try to restart it as sysdba on another session and get this error
Connected to an idle instance.
SQL> startup
ORA-01012: not logged on
'm using oracle rac 10.2.0.4.0 with 3 node and os SLES 10 sp 3 in early days we get error vip and lsnr service on my rac shutdown n restart itself,what happen to my rac ?
View 1 Replies View RelatedFor a one week, oracle database (v 9.0.1.0.0) is hanging frequently.I could't showdown/restart the database. After restart the server (RedHat), the database is opened without any problem.after 9 or 10 hours once again hanging. too large spaces are availble in my HardDisk.
View 3 Replies View RelatedCan I apply Referential Integrity to only selected rows of a particular column? This is the reference key to the primary key to another table. But, the issue is, this reference column is not having mandatory data for all the rows. So, whenever this is null, I dont want it to be referred by parent table.
View 4 Replies View RelatedHow is naming Integrity Constants useful? See example below:-
create table incrr
(incrid number(4) constraint incrid_pk primary key,
incrdate date not null,
incramt number(8,2) not null
);
In the above if I don't use incrid_pk it also works.Then what is the use of incrid_pk ?
