Oracle Restart 11.2.0.3 w/ASM. To improve redundancy we're planning to change the network configuration in our Oracle Restart environment from using 1 LAN interface to a bonded interface consisting of 2 interfaces.So the change will be from using "eth0" to using "bond0" consisting of "eth0" and "eth1". Are there any changes that must be done in the Oracle Restart configuration to reflect these changes?
I install oracle 11g2 on centos, in prerequisite checks step ,oracle database show this failed "Oracle Restart integrity Failed", I don't know what should i do ?
I just finished my first course in SQL for Oracle 11g at my local community college. We used SQL*Plus for the coursework and for the next class I need to use SQL Developer. Initially, I installed the Developer and was unable to establish a test connection due to the listener not being installed. I fiigured out that I needed to use the Network Configuration Assistant to add and configure the listener. After doing so, I was able to connect using Developer. The issue, however, is that any time I restart my computer, the TNS Listener service disappears from the list of services in Task Manager and I have to delete and then add and configure the service again using Network Configuration Assistant. Obviously, the Listener still exists because I can delete it and then recreate it.
We are unable to connect our admin account for some unknown reason. We keep receiving the following message "Invalid Login Credentials". We tried to change the admin credentials with sqlplus. We tried the usual procedure "apxchpwd" successfully, but we still cannot log in.We then tried to create a new admin2 account with the following pl/sql block.
SQL> connect APEX_030200 as sysdba Enter password: Connected. [code]....
We have implemented PeopleSoft with an Oracle database. What I need to do is provide clients with access to information stored in that database. Some additional information may come from other external databases, however for right now I am just trying to crawl, not run.
I am working on getting table information from the PS provider, so that I can understand what information is available. I am also working with the clients to determine if there are pieces of information that they need access to which are not currently native to the PS implementation. I need to identify these for step 2 of the process. My superiors were looking at using an SOA architecture using SOAP to move the data. I am open to suggestions and since the project is in its infancy, I have time to alter perceptions before it is too late.
I am doing a research for our next project.MIGRATING oracle forms6i to java/apex/adfi've gather documentations to present to my boss.but she wants an actual(hands on) migration without purchasing yet.
application that i can test?Is FORMS to .XML to JAVA? is that possible ?where topic my message belongs to.(that's why i've put in GENERAL topic)
I have a problem in oracle forms 10g, as a following: Arabic language show as special character for example(????,!!!!!!,....),I use now charcterset AMERICAN_AMERICA.WE8ISO8859P1 ,I cannot change this charcterset on my database Because I am afraid that the old data may be lost
Note: I am use now oracle form 6i without no problem in Arabic language and when I intended to converted to oracle form 10g ,the language problem has come back, and I was try to change nls_lang to several charcterset charcterset(Arabic_Egypt.AR8MSWIN1256 ,......) but still show in special character character like (????,!!!!!!,....)
We are using oracle10g database. Every time, we need to run the sql query and find answers for them. We are getting lot of request every day. I wanted to develop interface and i want ops team use the interface to pull the data.
Here are my thoughts...
1. using oracle APEX to develop interface.
2. Use the excel to write macro and get the answers for user request.
3. I can write a PLSQL to run the batch job and extract the data into excel and give it to ops team.
I am using OCI and instant_client (11.2.0.3.0) in my C++ program (on Windows 7) to connect remotely to 11G database. While doing a connection using server name as well as servername:port/service_name as connection strings, I am getting error of ORA-12504 TNS:listener was not given the SERVICE_NAME in CONNECT_DATA. According to instant client FAQ & white paper at [URL]..., no tnsnames.ora is required for instant client. Then why could I be getting this error? I ensured that only the instant client directory is in Path environment variable. There was a ODBC driver installed on this same host.
I am working on oracle and pl/sql since some time. so just a novice. I don't know much about sql server or transact sql, etc..I have a requirement to create an interface between Oracle and sql server.
we have a database on oracle and another on sql server. my requirement is to create an interface between oracle and sql server and see how can I update one (or more) tables (I am guessing using pl/sql) on sql server.
We would like to used Oracle secure backup using SAS interface on an IBM Autoloader Model TS-2900. Would it be possible to configure oracle secure backup using SAS?
In Oracle 10.2 installation there are OCI headers in rdbms/public directory: 10.2.0/rdbms/public/ocidem.h 10.2.0/rdbms/public/ocidfn.h 10.2.0/rdbms/public/ocikpr.h 10.2.0/rdbms/public/oci.h 10.2.0/rdbms/public/oci1.h ...
What should be installed additionally to have OCI headers in rdbms/public in Oracle 9.2.0?
I work with oracle 10g, on windows 7. sometime when i try to start my sqlplus in prompt command this message display.
C:UsersSony>sqlplus SP2-1503: Unable to initialize Oracle call interface SP2-0152: ORACLE may not be functioning properly
But the solution people have proposed into the forum are:
1 - check the environment variable Oracle_home and modify if it ending by ""
2 - or try tho run my promt command as Administrator.
I try the both, but only the second works. while now i don't understand why it works when i start the promt command as Administrator and why it no works when i don't run it like administrator. Another thing is i am the only user of my computer, i have only one session (administor session).
I have a client program that needs to communicate with another server program. My client program is implemented in PL/SQL using utl_tcp running on Oracle 9 while the server program is a 3rd party software running on Windows server 2003.
Basically my client program needs to send a request to the server, waits for the response (wait for the incoming string which ended /w chr(3) ) and then acknowledge (sending chr(6) ).
My problem is that if I wait for the chr(3) and then acknowledge. My send routine (l_sent := utl_tcp.write_text (g_conn, p_content) will raise a Oracle generic network error. It seems like the connection is closed. I checked /w the vendor and they said it might be I am taking too long to response ( I question timeout is the problem). I have also attempted to change my read routine from read_line to read_raw but it only make things worst. I cannot even read the complete string. At least with read_line, I can read back the entire string.
My current work around is to send out the ack before I receive the chr(3) (which is not recommended by our vendor).
when i try to connect with sqlplus or toad then i get an error
Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:Users>sqlplus SP2-1503: Unable to initialize Oracle call interface SP2-0152: ORACLE may not be functioning properly C:Users>
and i want to tell what i do before it-my all files were be converted in .FLT then i shorted out this problem after that when i tried to connect with sqlplus or toad then i get above error.and i have restarted my system but throwing same error.
I've looked in several places, OTN, Google, various DBA forums to figure out if the way we have a client installed on a network drive is supported by Oracle - short of asking them if it's supported.
The configuration we have is a full 10g R2 client installed on a network drive, and the various environment variables (Oracle_Home, TNS_ADMIN, etc.) point to that network location for use by client machines (I'm also trying to see if the Instant client is supported on a network location as well.) We've had this set up for years which has served us well.
A co-worker remembers years ago that this set up wasn't supported, Oracle 8 or so was his thought as to what version was used then. Another coworker at an Oracle conference asked this same question and was told that it was supported, however we can't find any documentation to that effect.
Now the question arises as to whether or not using a client installed on a networked drive is a supported configuration for 10g R2 or higher, and if so, where it would be documented.
We are in the process of changing network topology and are reviewing whether this configuration is still the right thing for us or if clients should be installed locally to where they are used.
We have an application that fetches and writes data into oracle database through pro c. oracle datyabase is on another server.
We are storing some secure information into oracle database so we want to encrypt the data sent by our aplication into oracle database.We do not want to use SSL(i.e certificates) and also do not want to make use of Advance Security Option available in oracle and also do not want to make any changes in sqlnet.ora file on server side.
achieve encryption of traffic between our application and Oracle database?
I have a trigger on insert which sets a :new field if it is net set.Basically:
CREATE OR REPLACE TRIGGER my_schema.T_OBS_BEF_IU BEFORE INSERT OR UPDATE ON my_schema.OBS FOR EACH ROW BEGIN If :new.work_db is null Then :new.work_db := my_package$PARAMETER.Get_label ('DEFAULT_WORK_DB'); -- function returning varchar2(200) End if; END; / It usually works fine. With jdbc, when the application insert a null value, the trigger replaces it with the good value.When the application can determine the non-null value, it is written in the table.
But when the trigger is restarted to a savepoint, due to a table lock, the second execution of this trigger goes wrong. The input :new.work_db value is not null anymore, nor has the correct value. Most of the time, it has the ascii 00 value (NUL), sometimes another weird character.
Do you know if my trigger code is correct, or if there would be some limitations ?
11g RAC environment, I manually shutdown the database with "shutdown immediate" and stop the listener with "lsnrctl stop". Later I manually startup only the database but the listener is also started automatically at almost the same.
Why would this happen ? I just don't want the listener to startup automatically at that time. What can i do to prevent the listener from auto-starting when i startup the database manually.
My client get the error Ora-12514 when he tries to connect to the db.Well;
1) we restart the services: "OracleServiceOrcl" and listener but nothing changes 2) We restart the server and nothing changes 3) We checked the dump and he was done on March,26th. No db export yesterday. Is there any link with the clock change of this week-end (location of the server: France)? 4) The lsnrctl services listener command run successfully but it doesn't mention the instance ORCL.
I just shutdown the database and it seems to take a while, don't know if it's stuck or just takes awhile. I try to restart it in another session and get this error:
'ORA-01012: not logged on'
1) Shutdown SQL> connect sys/Welcome1 as sysdba Connected. SQL> shutdown normal _
2) So I try to restart it as sysdba on another session and get this error Connected to an idle instance. SQL> startup ORA-01012: not logged on
'm using oracle rac 10.2.0.4.0 with 3 node and os SLES 10 sp 3 in early days we get error vip and lsnr service on my rac shutdown n restart itself,what happen to my rac ?
For a one week, oracle database (v 9.0.1.0.0) is hanging frequently.I could't showdown/restart the database. After restart the server (RedHat), the database is opened without any problem.after 9 or 10 hours once again hanging. too large spaces are availble in my HardDisk.
NAME TYPE VALUE ------------------------------------ ----------- ------------------------------ lock_sga boolean FALSE pre_page_sga boolean FALSE sga_max_size big integer 1152M sga_target big integer 0
[code]....
in scenario above, the database do not using ASMM, and spfile If I wan to increase db_cache_size parameter, do i need to rebounce instance?