Oracle 11.2.0.1 and 11.2.0.3.
Can rman refresh database from 11.2.0.1 to 11.2.0.3?
In another words, my source database is 11.2.0.1, my target database is 11.2.0.3
I want to refresh target database from source database. Is it ok since version is different?
We are planning to upgrade a database from 9.2.0.8.0 to 10.2.0.4.0.We have a lot a PRO*C programs pre compiled using 9.2.0.8.0 (and most likely even 9.2.0.7.0) compiler.
if we could upgrade the database without having to re-compile all the programs.We have tested this approach against some of our programs. Most of them executed fine - but in 2 cases we are getting "ORA-01001 invalid cursor". I suspect, that the case is that Pre compiler version 9 is not supported against 10g databases - but I am not sure.
Would it be a better option to upgrade Pre compiler/client as the first step and the db as the second step (and would that be supported) ? We definitely don't want to upgrade both Pre compiler/Client and the Database in one goal - that would be too risky.
I need to refresh a PROD database into TEST database. The PROD and TEST runs on 10g. I need a full refresh. Is there any pre req's which i should keep in mind ?.
View 1 Replies View RelatedI have doubts on export
1.) If we have taken exp (traditional export)of schema�s on database version 10.2.0 then shall we imp(traditional export) on database version 11.2.0?
2.) If we have taken expdp of schema�s on database version 10.2.0 then shall we impdp on database version 11.2.0?
3.) If we have taken exp(traditional export) of schema�s on database version 10.2.0 then shall we impdp on database version 11.2.0?
How can we refresh a database ?
View 3 Replies View RelatedI have a report of version 10g . I want to run this report in oracle reports 6i version.
View 1 Replies View RelatedI am trying to upgrade the database 32bit from 10.2.0.1 to 10.2.0.4 version in Linux 32 bit . I faced the version incompatibility error during patch set installation and hence ran the patchset installation with -ignoresysprereqs option.
Now during the patchset installation i encountered the below error in in the install logfile.
**************************************
INFO: Start output from spawned process:
INFO:
--------------------------------------------------------------------------------
INFO:
INFO: /u01/app/oracle/product/10.2.0/bin/genclntsh
INFO: genclntsh: genclntsh: Could not locate /u01/app/oracle/product/10.2.0/network/admin/shrept.lst
INFO: make:
INFO: *** [client_sharedlib] Error 1
INFO:
INFO: End output from spawned process.
INFO:
--------------------------------------------------------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/product/10.2.0/network/lib/ins_net_client.mk'. See '/u01/app/oracle/oraInventory/logs/installActions2012-06-24_11-45-11AM.log' for details.
Exception Severity: 1
***********************************************
Provide me the certified os and versions for oracle db 10gr2
I am getting ORA -32320 when I tried to fast fresh MVs that were truncated.I am able to complete refresh all MVs. However, some MVs are still giving me ORA-32320 when I try to do fast refresh even after complete refresh.
DBMS_MVIEW.EXPLAIN_PLAN says the MVIEW can be fast refreshed.
ERROR at line 1:
ORA-32320: REFRESH FAST of "dev"."Claim_line" unsupported after cointainer table
PMOPs
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 803
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 860
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 841
ORA-06512: at line 1
Quote:ORA-32320:
REFRESH FAST of "string"."string" unsupported after container table PMOPs Cause: A Partition Maintenance Operation (PMOP) has been performed on the materialized view, and no materialized view supports fast refersh after container table PMOPs. Action: Use REFRESH COMPLETE. Note: you can determine why your materialized view does not support fast refresh after PMOPs using the DBMS_MVIEW.EXPLAIN_MVIEW() API.
how to again make the MVs fast refreshable?
I am using Oracle 11g version, I wanted to check if a particular function is available in the earlier version of Oracle (Say 9i). Oracle optimizer to run the query only using the features available in the 9i version?
View 4 Replies View RelatedDB_VERSION=10.2.0.4
OS_VERSION=Windows 2008 R2
RAM_SIZE=32 GB
We have 2 production (OLTP) database( DB1 (18GB) and DB2 (200GB) ) on a server out of which DB2 database has almost 20 Materalized Views all (REFRESH FORCE ..ON DEMAND).
I have already informed the client that this is not the OLAP database where you are going to make use of the M Views for reporting purpose. However currently the client does not have any alternative.
Breif details :-
Out of 20 M Views 3 refresh once a week and where as the rest refresh every night daily.
We are currently testing a new website for which we had to re-schedule all M Views from their Old timings to New Timings i.e. Daily Basis.
But post re-scheduling the database performance was badly degarded as the database was too slow also the number of archives increasted to 300GB which was earlier 100 GB.To resolve the issue , we had to go back to the old timings and the database is currently working fine.
Requirement :-Client is looking out for an alternative solution as he needs to once again change the M View refresh time i.e. Daily Refresh.We already have 2 Oracle Instance on the server
Questions :-
1. Can i create another database ( sayTESTDB2 ) in no archivelog mode and create a db link to reduce the load on the server ?
2. If Yes .. Then is there any relavent link /example or Metalink Note ID for the same??
3. What all parameters do i need to consider while creating a DB Link ?
3. Out of 32 GB RAM , I have given 4GB and 8GB sga_max to DB1 and DB2 Respectively . Also the cpu utilization is normally 50-%60%.
Since currently we do not have any Licence for other server .. Can i make use of the same server ( i.e. creating 3 rd Oracle Instance )?
Since the main intention of this activity is reduce the load from the DB2 onto TESTDB when the daily refresh has set once again
I am the junior DBA first time i need to do Database Refreshment on UNIX platform.
1. Database Names are different and mount points are different.
2. Synonyms and dblinks are should be retained.
How to do this and what are the steps i need to follow.
What database version is supported as a repository for 10g OMS?
View 5 Replies View Relatedwhat does mean VERSION_TIME column in V$DATABASE;i know that there is an other column which is called CREATED which indicates when the database has been created and i think it will never change,but, what about VERSION_TIME ? when does it change ?
View 6 Replies View Relatedwhat version of java is supported by Oracle Database 10g and 11g. Actually i am writing a User Defined Function in Java and was asking this question to know which version of java i need to compile the source file before uploading the jar.
View 2 Replies View Relatedi have a oracle server installed enterprise edition, for some reation i need to degrade the version from enterprise to standard
i need same tablespace,data's everything same as of now.
I have Windows 7 (System Type - 64-bit OPerating System & ACPI X64 PC Type) and want to install Oracle Database.
The compatible version with the above operating system and send me the direct link for downloading.
how many rows created (replaced ?) und stored in v$object_usage on each fact of index scan? I'm using 11.2 version of database server
View 7 Replies View RelatedI am new user using oracle XE. During the installing process, all see is Ok, but, when database is over startup process, the process NOT RESPONDING, and i don't know the cause.
My environment
Hardware: NOTEBOOK HP Genuine Inter (R) CPU
T2500 @ 2.00GHz
1.66 GHz, 2 GB of RAM
SO : Windows XP with services pack 3
Installation flow implement:
1. Download Oraclexe from oracle site
2. The installation & configuration process finish succeful, but when el flow are in startup point and i treat to login
the login step give me the next message:
ERROR:
ORA-01089: Immediate shutdown in progress - no operations are permitted
Process ID:0
sESSION id: 0 Serial number: 0
I Hope about 5 hours and the message is the same, while when i hope about 5 hours.
I am trying to refresh the validation database with the old production backup i.e. our requirement. I have given the rman script i have executed and the output error message amd the rman configuration setting. Plus in the next post ill post the current sucessfully running RMAN script for your reference.
rman TARGET sys/passwd@Production CATALOG rman_pmxp/rman@catlog AUXILIARY sys/passwd @validation
RMAN> show all
2> ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 90 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'H:\backups\DB_Sunday_Backup\Prod_%d_%F.rman.ctl';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '%F';
[code]...
How to perform db refresh.
View 1 Replies View Relatedversion 10203 on windows (old db on solaris 8170)
i Have to refresh database data, No of users/schemas are 400+. fastest way to do that would be to do full exp/imp.but 1st drop current users cascade. (any command to drop all users in with one command?)then validate all all tables/schemas are same & up-to-date. i am thinking to check full exp logs on old & new db.(what that can take forever manually going through thousands of tables etc)
How to know the version of Oracle and JDBC of remote databases that is accessing my database through DBLInk.
For example I have a database A , B database is using my database Through a dblink.Now I want to know the version of oracle and jdbc which working on B.
when i am trying to connect to the database using sqldeveloper i am not able to connect to database. its giving me an error "Unsupported Oracle database version" but with plsql developer I am able to connecting.
View 8 Replies View Relatedwhen migrating from 32 bit Linux to 64 bit Windows version on database standard edition, is there a server media needed?if yes, can you give me more details on what it consists of?
View 2 Replies View RelatedI was using physical standby but my primary database had had some HW issue.So I had activated standby database to handle production.During 3 months, standby database was our live database and our old primary was unavailable.Now HW issue on primary has been fixed.And I want to set again my old configuration : means set primary and standby db.
I'm trying this :
1) check the SCN on old primary
2) Rman incremantal backup from scn
3) on primary db : catalog
4) on primary db : recover database noredo
Can we restore database password file in ASM for 11gR2 version.
View 4 Replies View RelatedWe can Import dump from higher database version to lower database version.
View 26 Replies View RelatedI have four Oracle 8i databases that can not be removed because of client requirements. These 8i databases have there own RMAN catalog which is 10G (Originally there were Oracle 8i, 9i and 10g databases using it but are now moved to 11g catalog). Databases are backing up fine. However, all the other databases are using the RMAN 11g Catalog. I want to point the Oracle 8i databases to point to the RMAN 11g recovery catalog. I created an 8i schema, however, i'm getting the following error message: RMAN-06429: RCVCAT database is not compatible with this version of RMAN. however, I wanted to put the question out there to see if there are any work arounds.
View 3 Replies View RelatedI downloaded Oracle Database 11g Express Edition R2 to test Apex (I've never used). I want to know how to change the language of the version of Apex (integrated with Oracle Database 11g XE)? I would apex in French.
View 7 Replies View RelatedI am experimenting with the 4.2 version of Apex at URL.....
I have created a tabular form (based on a view with an instead of trigger) and have restricted this form to "Update only" mode. Whenever I modify a field value and submit the change I get the error "Current version of data in database has changed since user initiated update process".
