I am using Oracle 11g version, I wanted to check if a particular function is available in the earlier version of Oracle (Say 9i). Oracle optimizer to run the query only using the features available in the 9i version?
View 4 RepliesWe are planning to upgrade a database from 9.2.0.8.0 to 10.2.0.4.0.We have a lot a PRO*C programs pre compiled using 9.2.0.8.0 (and most likely even 9.2.0.7.0) compiler.
if we could upgrade the database without having to re-compile all the programs.We have tested this approach against some of our programs. Most of them executed fine - but in 2 cases we are getting "ORA-01001 invalid cursor". I suspect, that the case is that Pre compiler version 9 is not supported against 10g databases - but I am not sure.
Would it be a better option to upgrade Pre compiler/client as the first step and the db as the second step (and would that be supported) ? We definitely don't want to upgrade both Pre compiler/Client and the Database in one goal - that would be too risky.
I have a report of version 10g . I want to run this report in oracle reports 6i version.
View 1 Replies View RelatedHow to know the uses to oracl9i version ?
View 2 Replies View Relateddifference between oracle version 10.2.0.3 and 10.2.03.I searched a lots of sites to get the details about these versions but unable to collect.
Oracle released both version or 10.2.0.3 and 10.2.03 are same versions treated by oracle.
I am trying to install Oracle 9i 32bit client on a windows 2008 server 64 bit OS. In the installation once I select the Oracle home directory and click on Next the whole pc just hangs. Nothing happens. When I checked the Application log I see an error with the following information.
the application (Oracle 9, from vendor Oracle) has the following problem. Oracle 9 is incompatible with this version or windows. For more information, contact Oracle.
In my test server ..When i'm going to check the oralce verion .which version this one ? im not seeing anything from oracle EE or standard edition & personal edition ...
SQL> select BANNER from v$version;
BANNER
----------------------------------------------------------------
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
My oracle version is 10g.I want to update a table which has 2 million rows and 20 columns. I want to update 3 columns in my table based on a query output.
Say:-
select decode(col1,'a',col2,col3) up_col1, decode(col5,'Y',20,30)* col6 up_col2, col7 up_col3 from base_tab a, update_tab b where a.key = b.key
I tried the simple update SQL, it hangs and never comeback even after 2 hrs.So I resort to PLSQL to complete my job using bulk collect with limits. Now I am stumbled upon with the Bulk update step.I referred to the BULK Update example given in [URL]...
I gone by 9i approach, I got invalid rowid error. Since the example doesn't uses a join.
I am little bit worried to go by 10g approach given in the example. I have to fetch entire row from my update table. My update table has 5 varchar(1000) fields. Anyway I am not going to affect them in my update. Whether it will occupy memory and again leads to hanging of my procedure.
In production server, already Oracle 10 and 11g sare installed. The new application designed to work on Entity Framework which nees ODP.Net 112030 Release 4 version.
As soon as ODP.Net Release got installed ont the server, the SQL Plus couldn't connect the Oracle databae. But the same setup is working all other lower environment
I have installed oracle 10g version 10.2.0.4.0 on Windows 7 64 bit from the following link.
[URL].........
After login to SQL* plus, when i see the version, it shows as 10.2.0.3.0. Is this correct?
I want to find out the oracle client version on a particular server. How can I do that? I used to know some files to look at, and part of the file name indicated the version #, but it's been too long and I don't remember which files they are.
View 2 Replies View RelatedWhere to download the oracle software for building a production server? What are steps ?
View 1 Replies View RelatedI installed 11.1.0.6. on Linux RedHat 5.5. Then upgraded to 11.1.0.7. However when I issue sqlplus /nolog and do select banner from v$version it shows 11.1.0.6. Although the install and upgrade were successful. I wonder why it does not show 11.1.0.7. I upgraded using the installer and not dbua could this be the reason why?
View 17 Replies View Relatedwhat version of java is supported by Oracle Database 10g and 11g. Actually i am writing a User Defined Function in Java and was asking this question to know which version of java i need to compile the source file before uploading the jar.
View 2 Replies View RelatedWhich version of 32 bit oracle client should I install on 10204_vista_w2k8_x64_production_db and Windows Server 2008 R2 x64 operating system?
10203_vista_w2k8_x86_production_client - This version does not work (no pre-requisite checks found in oraparam.ini)
We have various oracle versions line 9.2.0.1 or 10.1.0.1. There are 4-5 numbers which specify the version of the Oracle Installation.
View 1 Replies View RelatedI have Windows 7 (System Type - 64-bit OPerating System & ACPI X64 PC Type) and want to install Oracle Database.
The compatible version with the above operating system and send me the direct link for downloading.
We have a Oracle 10g database in the server. We are trying to connect to the server using oracle6 client and we are able to do so. How ever when retrieving the "time stamps" field , getting an error "ORA-03115: unsupported network datatype or representation". I understood from the error that, the client version need an upgrade.
How ever , We have another server which is having Oracle6 installed in the server and hence If i install/upgrade the client in my local system , I will be having trouble.
My question is , is there any way to get the timestamps from oracle6 client with out any issue.
I had two installations of Oracle on my server (10.2.0.4 and 11.2.0.1) under different linux users. The Databases used different listeners on different ports.
I upgraded my Oracle 11g to 11.2.0.3 successfully two weeks ago. However today I just checked that I couldnt reload my Oracle 10g Listener. On further analysis (lsnrctl status) I discovered that my 10g listener's version was "TNSLSNR for Linux: Version 11.2.0.3.0" . My Start Date from lsnrctl gives me the date when my Oracle 11g was upgraded.
Now I have tried to reload my 11g listener which works normally. I cannot reload my 10g listener (TNS-01190: The user is not authorized to execute the requested listener command). When i run ps command there is no process on my server for my 10g listener. I can only see my 11g listener process after running ps command. However everybody can ping my databases on Oracle 10g but i cannot identify or kill my listener process even on server level.
I want to upgrade my Oracle version from 10.2.0.1.0 to 10.2.0.4.0 but but i don't know what are the correct ways. i read the read me file in the patch set and fallowed the steps but its giving me error e.g. "Error in writing to file D:Oracleproduct10.2.0.2.0inoraevrus10.dll" every time. We have no RAC and Cluster Environment.
View 10 Replies View Relatedhow to create trial version in oracle project.i want to anyone use my oracle (forms) project for some limited time..and then expire after some time..
View 3 Replies View RelatedIs there a way to check which versions or oracle installed on the machine from command line?
The thing is I don't want to login to the database so I can't use SQL Plus also, till now I ran tnsping and checked the output but in case there are several versions of different platform I got only one version that was first on the path env.
How to know the version of Oracle and JDBC of remote databases that is accessing my database through DBLInk.
For example I have a database A , B database is using my database Through a dblink.Now I want to know the version of oracle and jdbc which working on B.
i need Oracle Developer Suite 9i version for windows xp and windows 7.
tell me where i can download it?
We are running Oracle Enterprise software on various client and DB servers and we are experiencing a problem (outlined here [URL] .....) where the apparent mismatch between the oracle drivers are causing the errors.
Our db servers are using 10.2.0.4 and 10.2.0.5 drivers and the clients are using 10.2.0.1.
Firstly, are the drivers the same on the Express and Enterprise editions so that if I update a development server using Express version (I don't have the authority to upgrade the Enterprise version nor the time to commission that) and it is successful, can I reasonably expect an upgrade to the Enterprise client versions on other servers to be safe/error free, baring environmental factors of course ?
Secondly, can I upgrade to version 10.2.0.5 now or do I have to go to the 11g version only ?
OS=Redhat LINUX6
DB=Oracle 11.20.1
Get the following error when installing Oracle. I have java version "1.7.0_05" and based on the log, it appears that Oracle is trying to install the binaries using an older version of java (1.5.0).
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0x00000030b7014d70, pid=2615, tid=140142440847120
#
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_17-b03 mixed mode)
# Problematic frame:
# C [ld-linux-x86-64.so.2+0x14d70]
#
I want to update the ODBC drivers in ORACLE 8i version. it's possible or not.
View 2 Replies View Relatedwhen i am trying to connect to the database using sqldeveloper i am not able to connect to database. its giving me an error "Unsupported Oracle database version" but with plsql developer I am able to connecting.
View 8 Replies View RelatedHow can I determine version of oracle database from APEX. Is there any built in table or view is available in APEX? Is it possible from Shared Component?
View 5 Replies View RelatedI am new to Oracle Workspace Manager. I have a trigger that fills my IDs every time i insert a record. I created the trigger before I enable the version of my table. After version was enabled in my table, I can no longer find my trigger but have these triggers instead:
OVM_DELETE_7 OVM_INSERT_7 OVM_UPDATE_7
What I wanted to do is Query the triggers that I created on my tables. Is there a way to do that without disabling the version on my table? I have too many version-enabled tables and that would be a hassle disabling the version in every table just for that query.