Installation :: Oracle Using Wrong Java Version During Install?
Jul 25, 2012
OS=Redhat LINUX6
DB=Oracle 11.20.1
Get the following error when installing Oracle. I have java version "1.7.0_05" and based on the log, it appears that Oracle is trying to install the binaries using an older version of java (1.5.0).
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0x00000030b7014d70, pid=2615, tid=140142440847120
#
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_17-b03 mixed mode)
# Problematic frame:
# C [ld-linux-x86-64.so.2+0x14d70]
#
I am trying to install the 11GR2 on HPUX 11.31 U ia64 with silent option.while tried to launch runinstaller, I hit the below issue.
dfltest> ./runInstaller -ignoreSysPrereqs -force -silent -responseFile > /db/dfltest/oracle/product/11.2.0/database/db_install.rsp.mainStarting Oracle Universal Installer... Checking Temp space: must be greater than 240 MB. Actual 475 MB PassedChecking swap space: must be greater than 150 MB. Actual 23189 MB PassedPreparing to launch Oracle Universal Installer from /tmp/OraInstall2013-07-17_12-01-18PM. Please wait ...oradev1 oradflts /db/dfltest/oracle/product/11.2.0/databasedfltest> Error: could not find libjava.soError: could not find Java 2 Runtime Environment. ----extracted from following files -----p10404530_112030_HP64_2of6.zipp10404530_112030_HP64_1of6.zip
Before I install the Oracle database 11.2.0.1 in Linux server 2.6.39-400.209.1.el6uek.x86_64, I created the following groups
oinstall, dba, oper, and asmadmin. groupadd oinstall # required from training groupadd dba # required from training groupadd oper # and group asmdba, asmoper from training groupadd asmadmin #
optional from training I made a mistake when I created Oracle user account. I created it with dba as initial group“ useradd -g dba -G oinstall,oper,asmadmin oracle”, instead of “useradd -g oinstall -G dba,oper,asmadmin oracle” After all I installed Oracle database, now I have concerns and questions. Should I use user mod to update the Oracle user account to install as initial group or just leave it alone? If I now do “usermod –g oinstall –G dba,oper,asmadmin oracle”, will it break anything, any impact to the database?
what version of java is supported by Oracle Database 10g and 11g. Actually i am writing a User Defined Function in Java and was asking this question to know which version of java i need to compile the source file before uploading the jar.
I rarely do client installs. I have not downloaded upgrades on a couple of years. I have been doing other stuff and oracle supports patching page has changed.
Need to install 11.2 on HP Itanium 64 bit. I can get 11.2.0.1 from otn.oracle.com.
1. I downloaded the 11.2.0.1 client from otn. I want to see if there is an 11.2.0.2 or 11.2.0.3 patch on Oracle support. I can only find upgrades that are specifically for the databsae server. Do I use this? See below for the notes I used so far. Note: Oracle Database Upgrade Path Reference List [ID 730365.1]
Which leads me to the following patch below. However, this download is much larger than the client download on otn. It also says 'database server' and does not break out to 'database client'.So not sure if this is what I use to patch the client or not. This upgrade is also much larger than the straight client download. So not sure if this is what I use to just upgrade the client.
Patch:10404530 Description 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER Product Oracle Database Family
This upgrade seems to be for the whole database and not just for the client install.
2. Do you apply PSU's to the client? I see them listed for the 'database'. Not sure if you apply to a separate client install. 3. We use the proC pre-compiler. When I look in the instant client download section, I see a seperate section for the proC pre-compiler download. I don't see that for the full blown client. Does the regular client download include the proC pre-compiler?
I had a Windows XP client pc with Oracle Client 11-1-0-6 installed. In my absence this client was reinstalled with Windows 7. Therefore all my Registry and Start - Programs settings have been lost.
However my original 11-1-0-6 Oracle Home still exists intact on my C: drive ( i.e. C:appitjxtproduct11.1.0client_2 )
Is there any way I can use the Oracle installer to register this Client Oracle Home again ( so it appears in the Registry and in START PROGRAMS ) ? or is there a way just to get the installer tio reinstall into the client_2 directory again ?
Most of the ones I'm seeing online relate to the database, not the client. I have linux.x64_11gR2_client.zip and and trying to do runInstaller and I get up to perform prerequisite tests and it tells me that I am missing packages and that kernel parameters are wrong. I've tried to run the runfixup.sh file and get a lot of this:
./orarun.sh: 186: [: true: unexpected operator./orarun.sh: 848: [: unexpected operator./orarun.sh: 864: [: unexpected operator./orarun.sh: 882: [: unexpected operator./orarun.sh: 903: [: unexpected operator./orarun.sh: 1052: [: unexpected operator./orarun.sh: 1057: [: unexpected operator./orarun.sh: 1075: [: unexpected operator./orarun.sh: 1085: [: unexpected operator./orarun.sh: 1115: [: unexpected operator./orarun.sh: 1143: [: unexpected operator./orarun.sh: 1189: [: unexpected operator./orarun.sh: 139: [: unexpected operator./orarun.sh: 139: [: unexpected operator./orarun.sh: 1228: [: unexpected operator./orarun.sh: 1284: [: unexpected operator./orarun.sh: 1342: [: unexpected operator./orarun.sh: 1426: [: unexpected operator./orarun.sh: 1451: [: unexpected operator And many of the supposedly missing packages actually are installed. IE: make. I have make 3.81 installed but the installer insists upon make 3.80.
I have installed Oracle virtual box on windows host and have created Oracle Linux virtual machine as guest. I have installed the database server on my host machine but rest of the things(Peoplesoft peopletools etc....) on Oracle Linux guest.Now, I am trying to installed database client on guest machine which is Linux so that I can connect to DB server running on host, but having difficulties in doing so.
, I am following the installation instruction given in the doc docs.oracle.com/cd/E11882_01/install.112/e24322.pdf, but when I finally run command runInstaller.sh doesn't happen anything.Actually, to install other software's I just double clicked the .sh file and it automatically started the installation process on a terminal window but when I clicked runInstaller.sh to install DB client, it didn't do anything.
Also, when I run the same command runInstaller.sh from command line after navigating to the directory where this file is present, It throws me error saying "no command found".By the way, why the steps given in doc are so complex, I wish If I could just double click runInstaller.sh just like others and it start the installation process.
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node. Expected Value : n/a Actual Value : n/a List of errors: - Permissons of file "/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"] - Cause: Cause of Problem Not Available - Action: User Action Not Available.
I have Oracle 11g database home in my 64 bit Windows 7 machine. However, now i would like to install Oracle 10.2.0 client as well. I tried giving a separate location.
But for some reason, whenever i start the Setup and run the Administrator Type, the installation just skips without giving any errors. It just creates the inventory folder in the specified path. It goes to the Product-Specific Prerequisite Checks and exits without giving any warnings or errors.
I have installed Oracle 11g XE with Apex 4.2 and I want to upgrade it to the apex 4.2.2. However, I do not have access to My Oracle connect. How do I uninstall apex 4.2 and install apex 4.2.2 full version from OTN?
In order to install XE 11g I downloaded 'Oracle Software Packager and Installer, Release 2.2.0.16.0' as compressed jar file ouiosp220160.jar.I unjared it, got to folder win32-> setup.exe.When trying to run the file, I got the message:Java Runtime Environment was not found at binjavaw.exe , hence Oracle Universal Installer cannot be run.
Im having issues properly installing NetBeans 7.3 , which is required to install Java ME... Currently I have NetBeans 7.01 installed and I was told I could install NetBeans 7.3 beside it and import plugins from NB 7.01. Well I am not having much luck with this.I have tried the usual shortcuts with only limited success... I did manage to unzip the files.. now I just need to make them available for NetBeans so they can be added as a package.
, We are doing a fresh setup on new hardware. On the old hardware Oracle is installed on the SAN and all data files are on there as well. Our new blades are Dell M620 with 2 mirrored 500GB drives and our SAN is Dell Complaint Storage and Complaint TLS Controller. The SAN uses hybrid SSD storage so it keeps the most used data cached.
I'm feeling it would be best to install the Oracle Server on the SAN. On top of that we have a single 620GB fusion IO NAND flash card in the mix. I am still researching the configuration of that.
I am new user using oracle XE. During the installing process, all see is Ok, but, when database is over startup process, the process NOT RESPONDING, and i don't know the cause.
My environment
Hardware: NOTEBOOK HP Genuine Inter (R) CPU T2500 @ 2.00GHz 1.66 GHz, 2 GB of RAM SO : Windows XP with services pack 3
Installation flow implement:
1. Download Oraclexe from oracle site 2. The installation & configuration process finish succeful, but when el flow are in startup point and i treat to login the login step give me the next message:
ERROR: ORA-01089: Immediate shutdown in progress - no operations are permitted Process ID:0 sESSION id: 0 Serial number: 0
I Hope about 5 hours and the message is the same, while when i hope about 5 hours.
I am using Oracle 11g version, I wanted to check if a particular function is available in the earlier version of Oracle (Say 9i). Oracle optimizer to run the query only using the features available in the 9i version?
I installed my oracle database successfully but dint install sample schemas.Now i want to install all sample schemas but couldnt find them under $Oracle_home/demo/schema.No **_main.sql is available there. sample scripts as am not in a condition to download companion
I am configuring Grid Infrastructure 11g2 on node A, one of two cluster nodes, and getting the following message: [INS-40916] Single-instance versions of Cluster Synchronization Services (CSS) are detected.
I executed runInstaller and installed software-only on both A and B nodes. It apparently the other node has already CSS instance running, and maybe caused by the installation.I remove the software from A first?
How do I stop CSS on the node A, and let the configuratoin to continue on this node B
We are planning to install second instance of Oracle 11gR2 in Linux server 2.6.39-400.21.1.el6uek.x86_64 x86_64. This is something we never haven done before. The existing instance has all the standard ports:
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Enterprise Manager Console HTTP Port (pterpdb02) = 1158 Enterprise Manager Agent Port (pterpdb02) = 3938
What ports should we select for second listener and enterprise manager? Is there anything else that we need to know before we install the second instance?
I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...
we have installed oracle database 11.2.0.3.0 using 12G for grid and 8G for DB. And now we want to apply the PSU 11.2.0.3.4, but found that there is not enough.
How much we need to upgrade to 11.2.0.3.4 totally?
