Installation :: Java Runtime Error During 11gr Install?
Jul 17, 2013
I am trying to install the 11GR2 on HPUX 11.31 U ia64 with silent option.while tried to launch runinstaller, I hit the below issue.
dfltest> ./runInstaller -ignoreSysPrereqs -force -silent -responseFile > /db/dfltest/oracle/product/11.2.0/database/db_install.rsp.mainStarting Oracle Universal Installer... Checking Temp space: must be greater than 240 MB. Actual 475 MB PassedChecking swap space: must be greater than 150 MB. Actual 23189 MB PassedPreparing to launch Oracle Universal Installer from /tmp/OraInstall2013-07-17_12-01-18PM. Please wait ...oradev1 oradflts /db/dfltest/oracle/product/11.2.0/databasedfltest> Error: could not find libjava.soError: could not find Java 2 Runtime Environment. ----extracted from following files -----p10404530_112030_HP64_2of6.zipp10404530_112030_HP64_1of6.zip
In order to install XE 11g I downloaded 'Oracle Software Packager and Installer, Release 2.2.0.16.0' as compressed jar file ouiosp220160.jar.I unjared it, got to folder win32-> setup.exe.When trying to run the file, I got the message:Java Runtime Environment was not found at binjavaw.exe , hence Oracle Universal Installer cannot be run.
Get the following error when installing Oracle. I have java version "1.7.0_05" and based on the log, it appears that Oracle is trying to install the binaries using an older version of java (1.5.0).
# An unexpected error has been detected by HotSpot Virtual Machine: # # SIGSEGV (0xb) at pc=0x00000030b7014d70, pid=2615, tid=140142440847120 # # Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_17-b03 mixed mode) # Problematic frame: # C [ld-linux-x86-64.so.2+0x14d70] #
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node. Expected Value : n/a Actual Value : n/a List of errors: - Permissons of file "/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"] - Cause: Cause of Problem Not Available - Action: User Action Not Available.
I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified Successfully accumulated necessary OCR keys. Creating OCR keys for user 'root', privgrp 'root'.. Operation successful. CRS-4256: Updating the profile
I am working on SLES 11 SP2 on zLinux and I am trying to install oracle 11gr2 silently. I was able to install the GI and it is running but when I try to install the oracle binaries I keep getting this error:
[FATAL] [INS-32035] Unable to create a new central inventory directory : /opt/oraInventory. CAUSE: The central inventory location provided is not empty.
The GI install created /opt/oraInventory and all the files are in there. I even changed the owner from grid:oinstall to oracle:oinstall but that did not work. When I did the install on SLES 11 SP1 I did not get this error.
I Have got a requirement where we have to generate an xml conforming to a particular XSD.
What i will be having already in place is an XSD document.
We are thinking of making a procedure which will be recieving the set of inputs required for creating that xml.(Data content of that XML.)We would have to make the XML according to that XSD.
Everytime Parsing the XSD is not feasible.We are looking at a solution which would be easy to make the xml from xsd at runtime.These values (DATA) will be available at run time.
I have downloaded the 2 zip files for Oracle Database 11g Release 2, Standard Edition, Standard Edition One, and Enterprise Edition windows 32bit. I am using windows vista on my laptop. I unpacked and installed the software.
I was getting issues with this installation but found when I turned off my firewall it install completely with no error messages,
I went to start the program but found that I was having problems with the password, I had entered the password I set up on installation, then I found in the start menu it shows a universal installer. I thought perhaps the password error is due to me not having installed it completely yet. So I have clicked on that, however I am now getting the following issue:
ok call me thick but just looked at the dbase folders installed in my start menu and there is a universal installer there, I have clicked on that and it has come up with an error,
OUI-10150:error:A runtime exception occurred while setting s_dlgCfgNamingLabelSIDnul in component Oracle Database 11g 11.2.0.1.0 Installation cannot continue for this component.
then it asks to tick one of the boxes:
Stop installation of all products or Stop installation of this component only.
Im having issues properly installing NetBeans 7.3 , which is required to install Java ME... Currently I have NetBeans 7.01 installed and I was told I could install NetBeans 7.3 beside it and import plugins from NB 7.01. Well I am not having much luck with this.I have tried the usual shortcuts with only limited success... I did manage to unzip the files.. now I just need to make them available for NetBeans so they can be added as a package.
, We are doing a fresh setup on new hardware. On the old hardware Oracle is installed on the SAN and all data files are on there as well. Our new blades are Dell M620 with 2 mirrored 500GB drives and our SAN is Dell Complaint Storage and Complaint TLS Controller. The SAN uses hybrid SSD storage so it keeps the most used data cached.
I'm feeling it would be best to install the Oracle Server on the SAN. On top of that we have a single 620GB fusion IO NAND flash card in the mix. I am still researching the configuration of that.
I rarely do client installs. I have not downloaded upgrades on a couple of years. I have been doing other stuff and oracle supports patching page has changed.
Need to install 11.2 on HP Itanium 64 bit. I can get 11.2.0.1 from otn.oracle.com.
1. I downloaded the 11.2.0.1 client from otn. I want to see if there is an 11.2.0.2 or 11.2.0.3 patch on Oracle support. I can only find upgrades that are specifically for the databsae server. Do I use this? See below for the notes I used so far. Note: Oracle Database Upgrade Path Reference List [ID 730365.1]
Which leads me to the following patch below. However, this download is much larger than the client download on otn. It also says 'database server' and does not break out to 'database client'.So not sure if this is what I use to patch the client or not. This upgrade is also much larger than the straight client download. So not sure if this is what I use to just upgrade the client.
Patch:10404530 Description 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER Product Oracle Database Family
This upgrade seems to be for the whole database and not just for the client install.
2. Do you apply PSU's to the client? I see them listed for the 'database'. Not sure if you apply to a separate client install. 3. We use the proC pre-compiler. When I look in the instant client download section, I see a seperate section for the proC pre-compiler download. I don't see that for the full blown client. Does the regular client download include the proC pre-compiler?
I installed my oracle database successfully but dint install sample schemas.Now i want to install all sample schemas but couldnt find them under $Oracle_home/demo/schema.No **_main.sql is available there. sample scripts as am not in a condition to download companion
We are planning to install second instance of Oracle 11gR2 in Linux server 2.6.39-400.21.1.el6uek.x86_64 x86_64. This is something we never haven done before. The existing instance has all the standard ports:
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Enterprise Manager Console HTTP Port (pterpdb02) = 1158 Enterprise Manager Agent Port (pterpdb02) = 3938
What ports should we select for second listener and enterprise manager? Is there anything else that we need to know before we install the second instance?
I had a Windows XP client pc with Oracle Client 11-1-0-6 installed. In my absence this client was reinstalled with Windows 7. Therefore all my Registry and Start - Programs settings have been lost.
However my original 11-1-0-6 Oracle Home still exists intact on my C: drive ( i.e. C:appitjxtproduct11.1.0client_2 )
Is there any way I can use the Oracle installer to register this Client Oracle Home again ( so it appears in the Registry and in START PROGRAMS ) ? or is there a way just to get the installer tio reinstall into the client_2 directory again ?
I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...
we have installed oracle database 11.2.0.3.0 using 12G for grid and 8G for DB. And now we want to apply the PSU 11.2.0.3.4, but found that there is not enough.
How much we need to upgrade to 11.2.0.3.4 totally?
I want to install Erwin for data modelling purpose. I am not looking at some heavy data models but a basic model. I am new to data modelling. I was given the CD to install, but I am not sure what I need.
Tried to use the yum command "yum install gcc" but get the following error. Error: cannot find a valid baseurl for repo:update
I think this is due to the "CentOS-Base.repo" file, which I've tried to update by changing the mirror URL's but no success.Then tried to find the rpms online ([URL]...
Most of the ones I'm seeing online relate to the database, not the client. I have linux.x64_11gR2_client.zip and and trying to do runInstaller and I get up to perform prerequisite tests and it tells me that I am missing packages and that kernel parameters are wrong. I've tried to run the runfixup.sh file and get a lot of this:
./orarun.sh: 186: [: true: unexpected operator./orarun.sh: 848: [: unexpected operator./orarun.sh: 864: [: unexpected operator./orarun.sh: 882: [: unexpected operator./orarun.sh: 903: [: unexpected operator./orarun.sh: 1052: [: unexpected operator./orarun.sh: 1057: [: unexpected operator./orarun.sh: 1075: [: unexpected operator./orarun.sh: 1085: [: unexpected operator./orarun.sh: 1115: [: unexpected operator./orarun.sh: 1143: [: unexpected operator./orarun.sh: 1189: [: unexpected operator./orarun.sh: 139: [: unexpected operator./orarun.sh: 139: [: unexpected operator./orarun.sh: 1228: [: unexpected operator./orarun.sh: 1284: [: unexpected operator./orarun.sh: 1342: [: unexpected operator./orarun.sh: 1426: [: unexpected operator./orarun.sh: 1451: [: unexpected operator And many of the supposedly missing packages actually are installed. IE: make. I have make 3.81 installed but the installer insists upon make 3.80.
I have installed Oracle virtual box on windows host and have created Oracle Linux virtual machine as guest. I have installed the database server on my host machine but rest of the things(Peoplesoft peopletools etc....) on Oracle Linux guest.Now, I am trying to installed database client on guest machine which is Linux so that I can connect to DB server running on host, but having difficulties in doing so.
, I am following the installation instruction given in the doc docs.oracle.com/cd/E11882_01/install.112/e24322.pdf, but when I finally run command runInstaller.sh doesn't happen anything.Actually, to install other software's I just double clicked the .sh file and it automatically started the installation process on a terminal window but when I clicked runInstaller.sh to install DB client, it didn't do anything.
Also, when I run the same command runInstaller.sh from command line after navigating to the directory where this file is present, It throws me error saying "no command found".By the way, why the steps given in doc are so complex, I wish If I could just double click runInstaller.sh just like others and it start the installation process.
I am trying to create a silent install as part of a batch file that does other things after. I'm running into the following issues
1) I need the batch file to wait until the install is done to continue. Trouble is that running setup with a response file opens up a new windows to run the install. I tried the wait command but doesn't work right either 2) Same issue with DBCA and a response file.
Any way to run the silent installs and have the batch file wait until the install is done and then continue? The less user intervention required, the better.
I have Oracle 11g database home in my 64 bit Windows 7 machine. However, now i would like to install Oracle 10.2.0 client as well. I tried giving a separate location.
But for some reason, whenever i start the Setup and run the Administrator Type, the installation just skips without giving any errors. It just creates the inventory folder in the specified path. It goes to the Product-Specific Prerequisite Checks and exits without giving any warnings or errors.