Installation :: Recovering An Oracle Client Install
Jul 25, 2012
I had a Windows XP client pc with Oracle Client 11-1-0-6 installed. In my absence this client was reinstalled with Windows 7. Therefore all my Registry and Start - Programs settings have been lost.
However my original 11-1-0-6 Oracle Home still exists intact on my C: drive ( i.e. C:appitjxtproduct11.1.0client_2 )
Is there any way I can use the Oracle installer to register this Client Oracle Home again ( so it appears in the Registry and in START PROGRAMS ) ? or is there a way just to get the installer tio reinstall into the client_2 directory again ?
View 2 Replies
ADVERTISEMENT
Jul 2, 2012
I rarely do client installs. I have not downloaded upgrades on a couple of years. I have been doing other stuff and oracle supports patching page has changed.
Need to install 11.2 on HP Itanium 64 bit. I can get 11.2.0.1 from otn.oracle.com.
1. I downloaded the 11.2.0.1 client from otn. I want to see if there is an 11.2.0.2 or 11.2.0.3 patch on Oracle support. I can only find upgrades that are specifically for the databsae server. Do I use this? See below for the notes I used so far. Note: Oracle Database Upgrade Path Reference List [ID 730365.1]
Which leads me to the following patch below. However, this download is much larger than the client download on otn. It also says 'database server' and does not break out to 'database client'.So not sure if this is what I use to patch the client or not. This upgrade is also much larger than the straight client download. So not sure if this is what I use to just upgrade the client.
Patch:10404530 Description 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER
Product Oracle Database Family
This upgrade seems to be for the whole database and not just for the client install.
2. Do you apply PSU's to the client? I see them listed for the 'database'. Not sure if you apply to a separate client install.
3. We use the proC pre-compiler. When I look in the instant client download section, I see a seperate section for the proC pre-compiler download. I don't see that for the full blown client. Does the regular client download include the proC pre-compiler?
View 2 Replies
View Related
Jul 3, 2013
Most of the ones I'm seeing online relate to the database, not the client. I have linux.x64_11gR2_client.zip and and trying to do runInstaller and I get up to perform prerequisite tests and it tells me that I am missing packages and that kernel parameters are wrong. I've tried to run the runfixup.sh file and get a lot of this:
./orarun.sh: 186: [: true: unexpected operator./orarun.sh: 848: [: unexpected operator./orarun.sh: 864: [: unexpected operator./orarun.sh: 882: [: unexpected operator./orarun.sh: 903: [: unexpected operator./orarun.sh: 1052: [: unexpected operator./orarun.sh: 1057: [: unexpected operator./orarun.sh: 1075: [: unexpected operator./orarun.sh: 1085: [: unexpected operator./orarun.sh: 1115: [: unexpected operator./orarun.sh: 1143: [: unexpected operator./orarun.sh: 1189: [: unexpected operator./orarun.sh: 139: [: unexpected operator./orarun.sh: 139: [: unexpected operator./orarun.sh: 1228: [: unexpected operator./orarun.sh: 1284: [: unexpected operator./orarun.sh: 1342: [: unexpected operator./orarun.sh: 1426: [: unexpected operator./orarun.sh: 1451: [: unexpected operator And many of the supposedly missing packages actually are installed. IE: make. I have make 3.81 installed but the installer insists upon make 3.80.
View 3 Replies
View Related
Jan 4, 2013
I have installed Oracle virtual box on windows host and have created Oracle Linux virtual machine as guest. I have installed the database server on my host machine but rest of the things(Peoplesoft peopletools etc....) on Oracle Linux guest.Now, I am trying to installed database client on guest machine which is Linux so that I can connect to DB server running on host, but having difficulties in doing so.
, I am following the installation instruction given in the doc docs.oracle.com/cd/E11882_01/install.112/e24322.pdf, but when I finally run command runInstaller.sh doesn't happen anything.Actually, to install other software's I just double clicked the .sh file and it automatically started the installation process on a terminal window but when I clicked runInstaller.sh to install DB client, it didn't do anything.
Also, when I run the same command runInstaller.sh from command line after navigating to the directory where this file is present, It throws me error saying "no command found".By the way, why the steps given in doc are so complex, I wish If I could just double click runInstaller.sh just like others and it start the installation process.
View 22 Replies
View Related
Nov 15, 2013
I have Oracle 11g database home in my 64 bit Windows 7 machine. However, now i would like to install Oracle 10.2.0 client as well. I tried giving a separate location.
But for some reason, whenever i start the Setup and run the Administrator Type, the installation just skips without giving any errors. It just creates the inventory folder in the specified path. It goes to the Product-Specific Prerequisite Checks and exits without giving any warnings or errors.
View 15 Replies
View Related
Nov 12, 2013
How to Install Oracle 9i client software on Windows 8 64bit?
View 7 Replies
View Related
Mar 11, 2010
I want to install Erwin for data modelling purpose. I am not looking at some heavy data models but a basic model. I am new to data modelling. I was given the CD to install, but I am not sure what I need.
View 1 Replies
View Related
Jul 11, 2012
I need to install Oracle client to get latest sql plus working on client pc as the problem is, i am not able to find out where i can download this , i just need the sql plus as i am not able use many commands because when i installed oracle forms 6i client tool , sql plus 8.0 got installed.
View 4 Replies
View Related
May 2, 2013
Caused our sql 8i not install 100%, while we are using windows 7.
View 2 Replies
View Related
Aug 30, 2013
I am unable to install Oracle 11g R2 database. The setup screen disappears every time I click the Desktop class during the installation process.
View 8 Replies
View Related
Sep 28, 2012
How can i set db home name at the time of installation of oracle 11.2.O.3 .
View 3 Replies
View Related
Jul 25, 2012
OS=Redhat LINUX6
DB=Oracle 11.20.1
Get the following error when installing Oracle. I have java version "1.7.0_05" and based on the log, it appears that Oracle is trying to install the binaries using an older version of java (1.5.0).
# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0x00000030b7014d70, pid=2615, tid=140142440847120
#
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_17-b03 mixed mode)
# Problematic frame:
# C [ld-linux-x86-64.so.2+0x14d70]
#
View 7 Replies
View Related
Sep 12, 2012
OS=Redhat 5
Oracle=11gr2
Grid=11gR2
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node.
Expected Value : n/a
Actual Value : n/a
List of errors:
- Permissons of file
"/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"]
- Cause: Cause of Problem Not Available
- Action: User Action Not Available.
View 1 Replies
View Related
May 11, 2013
which is really a HA zone clustered in VCS(not important for installation of the database).
What parameters do I need to set or change in the Solaris zone, there seems to be no /etc/system file.
View 3 Replies
View Related
Aug 20, 2012
I just installed WEBLOGIC server on linux with oracle forms 11g builder and report builder on the server.
On the client machine , i have probleme to intsall oracle forms 11g , in one of the steps it asks me to enter the absolute location of server weblogic , i enter the location of the weblogic on the server , but it dosent' work. is it mean that i have to install the weblogic on the client machine too!! if not to install forms builder 11g on the client
View 2 Replies
View Related
Nov 17, 2010
I have installed Crystal reports server 2008 VI on a Windows 2008 64bit OS. I have added Crystal reports that connects to Oracle database through CMC. I then installed Oracle 10g client 32bit on the server and created and tested the required DSNs using ODBC 32bit. All the testings are successfull.
Now when I try to run my Oracle report through CMC it prompts for the parameters and when I enter them and click ok, gives me the following error: Failed to open the connection. Details: Database Vendor 12154.
I reported the above issue to SAP and they mentioned that this is a bug with Oracle and install the latest patch for my Oracle client software. My current Oracle client 10g 32bit version is: 10.2.0.1.0
I downloaded the patch 4923768 for Oracle client 10g. In the installation instructions, it mentions to apply the patch using OPatch. I already see the OPath folder in the C:\oracle\product\10.2.0\client_1 directory, but I am not sure how to enter the command to apply the patch using OPatch. Do I have to do it using DOS window or any other tool? I don't have an Oracle admin in our company, so I am trying to figure out how to apply this patch on client workstations.
View 7 Replies
View Related
Jan 4, 2012
We are unable install oracle 10g client it is showing error error in writing directory c:Docume~1admin~1locals~1emporainstall2012-01-04_08-05-38PM. ensure that this directory is writable and has atlest 45MB of disk space . Installation cannot continue
View 3 Replies
View Related
Aug 22, 2011
Which version of 32 bit oracle client should I install on 10204_vista_w2k8_x64_production_db and Windows Server 2008 R2 x64 operating system?
10203_vista_w2k8_x86_production_client - This version does not work (no pre-requisite checks found in oraparam.ini)
View 15 Replies
View Related
Jul 25, 2012
I am trying to install Oracle client 11G software in AIX box. In /home/oracle, I find 7 profile files. I am not sure which profile file I am supposed to consider.
View 1 Replies
View Related
Apr 25, 2010
I am try to install the oracle toad 8.6 in oracle 11g 32bit for window 7 operating system.
- the install oracle toad completed, but trying to connection to the database, unable to connect, nothing error when trying to connect.
-is oracle toad 8.6 support to window 7? any version for oracle toad to support window 7.
View 8 Replies
View Related
Nov 29, 2010
I've looked in several places, OTN, Google, various DBA forums to figure out if the way we have a client installed on a network drive is supported by Oracle - short of asking them if it's supported.
The configuration we have is a full 10g R2 client installed on a network drive, and the various environment variables (Oracle_Home, TNS_ADMIN, etc.) point to that network location for use by client machines (I'm also trying to see if the Instant client is supported on a network location as well.) We've had this set up for years which has served us well.
A co-worker remembers years ago that this set up wasn't supported, Oracle 8 or so was his thought as to what version was used then. Another coworker at an Oracle conference asked this same question and was told that it was supported, however we can't find any documentation to that effect.
Now the question arises as to whether or not using a client installed on a networked drive is a supported configuration for 10g R2 or higher, and if so, where it would be documented.
We are in the process of changing network topology and are reviewing whether this configuration is still the right thing for us or if clients should be installed locally to where they are used.
View 2 Replies
View Related
Apr 1, 2011
I have an Oracle server with Oracle 11g R2 and need to install its clients over several desktops.I am using 2 separate installs, but I think that this might be redundant.The 2 setups I'm using are:
- ODAC 11.2 Release 3 and Oracle Developer Tools for Visual Studio (11.2.0.2.1)
- 64-bit Oracle Data Access Components (ODAC) Downloads
- Is really necessary to install both of the 2 setup, or there is something I can use once instead of it?
View 4 Replies
View Related
Oct 3, 2011
can u give me link from where i have to learn step by step how to install oracle develor suit 10g on windows 7 32 bit
View 4 Replies
View Related
May 25, 2010
I need to install Oracle Data Provider for NET (and all depending Oracle client SW components) in multiple client machines.
Exist any other options (faster) without installing oracle client on each of the machines?
View 4 Replies
View Related
Mar 2, 2011
I have a question in Recovering the database.
E.g. Backup has done yesterday and today evening all files are lost (control, redologs, archive, etc.)
We are in 24/7 environment then how we need to recover the database?
View 4 Replies
View Related
Apr 3, 2012
can we install oracle 10g,developer 2000 at window7 64 bit
View 9 Replies
View Related
Sep 14, 2012
I have Windows 2008 R2 64 Bit Operating Server Installed.
Other software that are Installed :
1) Visual Studio 2010 Ultimate 32 Bit.
2) Microsoft SharePoint server 2010 64 Bit.
For my development purpose I want to install both oracle 11g client 32 bit and oracle 11g client 64 on the same machine.
Is it possible to install both 32 and 64 bit instance on the same machine.
View 5 Replies
View Related
Oct 25, 2012
where to download - Oracle database client(32-bit) 11.2.0.3 for windows 7 ?
View 5 Replies
View Related
Mar 19, 2013
We are in process of upgrading 10g (RAC) database to 11g(RAC), does the oracle client software must also be upgraded to 11g or the 10g client can be used for 11g database connectivity, since there are thousands of end users it is very difficult to upgrade all the clients.What is the best approach for client software?
View 3 Replies
View Related
Nov 28, 2012
I'm needing to set up some Oracle clients (11.2) on middle tier/application servers Looking around for a simple/repeatable way of meeting the pre-install requirements and was considering using the "validated" rpms.
The oracle-rdbms-server-11gR2-preinstall rpm i believe is really for a database server setup, so it's doing some group/kernel parameter/package setup that i suspect isn't really required for a client only setup.
Do people use those validated rpms for client only installs?Might there be a "Oracle Validated Client preinstall" rpm out there?Should I just script the package installs and user/group creation?
how to make the client requirements/install process quick and easy!
View 4 Replies
View Related
