Installation :: Not Install 100% Oracle 8i

May 2, 2013

Caused our sql 8i not install 100%, while we are using windows 7.

View 2 Replies


ADVERTISEMENT

Installation :: Oracle 11g Client Install

Jul 2, 2012

I rarely do client installs. I have not downloaded upgrades on a couple of years. I have been doing other stuff and oracle supports patching page has changed.

Need to install 11.2 on HP Itanium 64 bit. I can get 11.2.0.1 from otn.oracle.com.

1. I downloaded the 11.2.0.1 client from otn. I want to see if there is an 11.2.0.2 or 11.2.0.3 patch on Oracle support. I can only find upgrades that are specifically for the databsae server. Do I use this? See below for the notes I used so far. Note: Oracle Database Upgrade Path Reference List [ID 730365.1]

Which leads me to the following patch below. However, this download is much larger than the client download on otn. It also says 'database server' and does not break out to 'database client'.So not sure if this is what I use to patch the client or not. This upgrade is also much larger than the straight client download. So not sure if this is what I use to just upgrade the client.

Patch:10404530 Description 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER
Product Oracle Database Family

This upgrade seems to be for the whole database and not just for the client install.

2. Do you apply PSU's to the client? I see them listed for the 'database'. Not sure if you apply to a separate client install.
3. We use the proC pre-compiler. When I look in the instant client download section, I see a seperate section for the proC pre-compiler download. I don't see that for the full blown client. Does the regular client download include the proC pre-compiler?

View 2 Replies View Related

Installation :: Unable To Install Oracle 11g R2

Aug 30, 2013

I am unable to install Oracle 11g R2 database. The setup screen disappears every time I click the Desktop class during the installation process.

View 8 Replies View Related

Installation :: Recovering An Oracle Client Install

Jul 25, 2012

I had a Windows XP client pc with Oracle Client 11-1-0-6 installed. In my absence this client was reinstalled with Windows 7. Therefore all my Registry and Start - Programs settings have been lost.

However my original 11-1-0-6 Oracle Home still exists intact on my C: drive ( i.e. C:appitjxtproduct11.1.0client_2 )

Is there any way I can use the Oracle installer to register this Client Oracle Home again ( so it appears in the Registry and in START PROGRAMS ) ? or is there a way just to get the installer tio reinstall into the client_2 directory again ?

View 2 Replies View Related

Installation :: Oracle 11gR2 Install Through Response File

Sep 28, 2012

How can i set db home name at the time of installation of oracle 11.2.O.3 .

View 3 Replies View Related

Installation :: Oracle Using Wrong Java Version During Install?

Jul 25, 2012

OS=Redhat LINUX6
DB=Oracle 11.20.1

Get the following error when installing Oracle. I have java version "1.7.0_05" and based on the log, it appears that Oracle is trying to install the binaries using an older version of java (1.5.0).

# An unexpected error has been detected by HotSpot Virtual Machine:
#
# SIGSEGV (0xb) at pc=0x00000030b7014d70, pid=2615, tid=140142440847120
#
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_17-b03 mixed mode)
# Problematic frame:
# C [ld-linux-x86-64.so.2+0x14d70]
#

View 7 Replies View Related

Installation :: Install Oracle 11g Client In Ubuntu 12.04 64bit

Jul 3, 2013

Most of the ones I'm seeing online relate to the database, not the client.  I have linux.x64_11gR2_client.zip and and trying to do runInstaller and I get up to perform prerequisite tests and it tells me that I am missing packages and that kernel parameters are wrong. I've tried to run the runfixup.sh file and get a lot of this:

 ./orarun.sh: 186: [: true: unexpected operator./orarun.sh: 848: [: unexpected operator./orarun.sh: 864: [: unexpected operator./orarun.sh: 882: [: unexpected operator./orarun.sh: 903: [: unexpected operator./orarun.sh: 1052: [: unexpected operator./orarun.sh: 1057: [: unexpected operator./orarun.sh: 1075: [: unexpected operator./orarun.sh: 1085: [: unexpected operator./orarun.sh: 1115: [: unexpected operator./orarun.sh: 1143: [: unexpected operator./orarun.sh: 1189: [: unexpected operator./orarun.sh: 139: [: unexpected operator./orarun.sh: 139: [: unexpected operator./orarun.sh: 1228: [: unexpected operator./orarun.sh: 1284: [: unexpected operator./orarun.sh: 1342: [: unexpected operator./orarun.sh: 1426: [: unexpected operator./orarun.sh: 1451: [: unexpected operator And many of the supposedly missing packages actually are installed. IE: make. I have make 3.81 installed but the installer insists upon make 3.80. 

View 3 Replies View Related

Installation :: Unable To Install Oracle Database Client On Linux?

Jan 4, 2013

I have installed Oracle virtual box on windows host and have created Oracle Linux virtual machine as guest. I have installed the database server on my host machine but rest of the things(Peoplesoft peopletools etc....) on Oracle Linux guest.Now, I am trying to installed database client on guest machine which is Linux so that I can connect to DB server running on host, but having difficulties in doing so.

, I am following the installation instruction given in the doc docs.oracle.com/cd/E11882_01/install.112/e24322.pdf, but when I finally run command runInstaller.sh doesn't happen anything.Actually, to install other software's I just double clicked the .sh file and it automatically started the installation process on a terminal window but when I clicked runInstaller.sh to install DB client, it didn't do anything.

Also, when I run the same command runInstaller.sh from command line after navigating to the directory where this file is present, It throws me error saying "no command found".By the way, why the steps given in doc are so complex, I wish If I could just double click runInstaller.sh just like others and it start the installation process.

View 22 Replies View Related

RAC/ASM Clusterware Installation :: OLR Integrity Error During Oracle Database Install

Sep 12, 2012

OS=Redhat 5
Oracle=11gr2
Grid=11gR2

I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check

OLR Integrity - This test checks the integrity of OLR on the local node.
Expected Value : n/a
Actual Value : n/a
List of errors:
- Permissons of file
"/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"]
- Cause: Cause of Problem Not Available
- Action: User Action Not Available.

View 1 Replies View Related

Installation :: Oracle 10g Client Install Skips - Windows 7 Machine

Nov 15, 2013

I have Oracle 11g database home in my 64 bit Windows 7 machine. However, now i would like to install Oracle 10.2.0 client as well. I tried giving a separate location.

But for some reason, whenever i start the Setup and run the Administrator Type, the installation just skips without giving any errors. It just creates the inventory folder in the specified path.  It goes to the Product-Specific Prerequisite Checks and exits without giving any warnings or errors. 

View 15 Replies View Related

Installation :: How To Install Oracle 9i Client Software On Windows 8 64bit

Nov 12, 2013

How to Install Oracle 9i client software on Windows 8 64bit?

View 7 Replies View Related

Installation :: Install Latest Release Of Oracle Database On A Solaris 11 Zone

May 11, 2013

which is really a HA zone clustered in VCS(not important for installation of the database).

What parameters do I need to set or change in the Solaris zone, there seems to be no /etc/system file.

View 3 Replies View Related

Installation :: Install On SAN Vs Blade?

Aug 21, 2013

, We are doing a fresh setup on new hardware.  On the old hardware Oracle is installed on the SAN and all data files are on there as well.  Our new blades are Dell M620 with 2 mirrored 500GB drives and our SAN is Dell Complaint Storage and Complaint TLS Controller.  The SAN uses hybrid SSD storage so it keeps the most used data cached. 

 I'm feeling it would be best to install the Oracle Server on the SAN.  On top of that we have a single 620GB fusion IO NAND flash card in the mix.  I am still researching the configuration of that.

View 0 Replies View Related

Installation :: Install Sample Schema?

Sep 1, 2012

I installed my oracle database successfully but dint install sample schemas.Now i want to install all sample schemas but couldnt find them under $Oracle_home/demo/schema.No **_main.sql is available there. sample scripts as am not in a condition to download companion

View 6 Replies View Related

Installation :: Install Two Database Instances In The Same Server

Jun 4, 2013

We are planning to install second instance of Oracle 11gR2 in Linux server 2.6.39-400.21.1.el6uek.x86_64 x86_64. This is something we never haven done before. The existing instance has all the standard ports:

Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))

Enterprise Manager Console HTTP Port (pterpdb02) = 1158
Enterprise Manager Agent Port (pterpdb02) = 3938

What ports should we select for second listener and enterprise manager? Is there anything else that we need to know before we install the second instance?

View 6 Replies View Related

RAC/ASM Clusterware Installation :: How To Install Grid Infrastructure 11.2.0.3 On AIX 6.2

May 22, 2013

I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...

./runcluvfy.sh stage -pre crsinst -n oradbprd016,oradbprd022 -fixup -verbose

These are the errors...

Check: TCP connectivity of subnet "192.168.99.0"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
c-oradb003av:192.168.99.32 oradbprd016:192.168.99.32 failed

ERROR:

PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd016 : 192.168.99.32" failed
c-oradb003av:192.168.99.32 oradbprd022:192.168.99.235 failed

ERROR:

PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd022 : 192.168.99.235" failed
Result: TCP connectivity check failed for subnet "192.168.99.0"

The physical hostnames of the servers are c-oradb003av and c-oradb005av In which they are aliases as follows in the /etc/hosts files.

# c-oradb003av
192.168.99.32 c-oradb003av.corppvt.com c-oradb003av
192.168.99.32 oradbprd016.corppvt.com oradbprd016
192.168.99.243 oradbvip016.corppvt.com oradbvip016
192.168.100.18 oradbpri016.corppvt.com oradbpri016
192.168.103.18 oradbrep016.corppvt.com oradbrep016

[code]....

it would say it is failing between the physical hostname and the alias which are using the same ip address?

PRVF-7617 : Node connectivity between "c-oradb003av : 192.168.99.32" and "oradbprd016 : 192.168.99.32" failed (it's the same address?)

View 3 Replies View Related

Installation :: Space To Install 11.2.0.3.4 On AIX Power System (64bit)

Jan 17, 2013

we have installed oracle database 11.2.0.3.0 using 12G for grid and 8G for DB. And now we want to apply the PSU 11.2.0.3.4, but found that there is not enough.

How much we need to upgrade to 11.2.0.3.4 totally?

View 5 Replies View Related

Client Tools :: Erwin Tool Installation / Which One To Install

Mar 11, 2010

I want to install Erwin for data modelling purpose. I am not looking at some heavy data models but a basic model. I am new to data modelling. I was given the CD to install, but I am not sure what I need.

View 1 Replies View Related

Installation :: Java Runtime Error During 11gr Install?

Jul 17, 2013

I am trying to install the 11GR2 on HPUX 11.31 U ia64 with silent option.while tried to launch runinstaller, I hit the below issue.

dfltest> ./runInstaller -ignoreSysPrereqs -force -silent -responseFile > /db/dfltest/oracle/product/11.2.0/database/db_install.rsp.mainStarting Oracle Universal Installer... Checking Temp space: must be greater than 240 MB.   Actual 475 MB    PassedChecking swap space: must be greater than 150 MB.   Actual 23189 MB    PassedPreparing to launch Oracle Universal Installer from /tmp/OraInstall2013-07-17_12-01-18PM. Please wait ...oradev1 oradflts /db/dfltest/oracle/product/11.2.0/databasedfltest> Error: could not find libjava.soError: could not find Java 2 Runtime Environment. ----extracted from following files -----p10404530_112030_HP64_2of6.zipp10404530_112030_HP64_1of6.zip

View 15 Replies View Related

RAC/ASM Clusterware Installation :: 11g Release 2 Install Missing Packages?

Aug 8, 2012

I'm trying to install 11g Release 2 on a CentOS (4.9) box, but the pre-req check shows that I'm missing the following packages (I had 9 to begin):

gcc-3.4.6 (X86_64)
gcc-c++-3.4.6(X86_64)
libstdc++-devel-3.4.6

Tried to use the yum command "yum install gcc" but get the following error.
Error: cannot find a valid baseurl for repo:update

I think this is due to the "CentOS-Base.repo" file, which I've tried to update by changing the mirror URL's but no success.Then tried to find the rpms online ([URL]...

INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: rm -f ntcontab.*

[code]....

View 2 Replies View Related

Installation :: Create Silent Install As Part Of Batch File

Aug 1, 2012

I am trying to create a silent install as part of a batch file that does other things after. I'm running into the following issues

1) I need the batch file to wait until the install is done to continue. Trouble is that running setup with a response file opens up a new windows to run the install. I tried the wait command but doesn't work right either
2) Same issue with DBCA and a response file.

Any way to run the silent installs and have the batch file wait until the install is done and then continue? The less user intervention required, the better.

View 11 Replies View Related

RAC/ASM Clusterware Installation :: Grid Install And Error (First Node Configuration Failed)?

Jan 26, 2013

I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:

clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile

[code]..

View 2 Replies View Related

Installation :: 11gr2 Silent Install Error - Unable To Create A New Central Inventory Directory

Apr 2, 2013

I am working on SLES 11 SP2 on zLinux and I am trying to install oracle 11gr2 silently. I was able to install the GI and it is running but when I try to install the oracle binaries I keep getting this error:

[FATAL] [INS-32035] Unable to create a new central inventory directory : /opt/oraInventory.
CAUSE: The central inventory location provided is not empty.

The GI install created /opt/oraInventory and all the files are in there. I even changed the owner from grid:oinstall to oracle:oinstall but that did not work. When I did the install on SLES 11 SP1 I did not get this error.

I am running this command to install oracle:

/runInstaller -silent -ignorePrereq -showProgress -waitForCompletion -responseFile /tmp/db_install.rsp
drwxrwx--- 6 oracle oinstall 4096 Apr 2 10:42 oraInventory
drwxrwx--- 2 oracle oinstall 4096 Apr 2 10:39 ContentsXML
drwxrwx--- 3 oracle oinstall 4096 Apr 2 10:41 backup
drwxrwx--- 2 oracle oinstall 4096 Apr 2 10:41 logs

[code]....

View 5 Replies View Related

RAC/ASM Clusterware Installation :: ORA-03114 / Not Connected To ORACLE Error With Oracle DB Installation

Dec 3, 2012

I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.

View 25 Replies View Related

Installation :: Oracle Database Express And Other Editions Installation Doc Difference?

Mar 20, 2013

My question is; I've been reading the Oracle database 11g R2 documentation at this link [URL]...

I passed a couple of days learning about all installation configuration parts including the desktop class and server class.As I was learning, So I had already downloaded Oracle Database Express 11g R2 for win32.

So as i had finished the installation guide I thought it's time to install the oracle now. I did it, and what I found was that there was not any option during installation that i read in above documentation. While trying to find about this difference i reached on documentation[URL]...

That is for express version only.

My question here is, Express edition, we use for learning purpose, But it doesn't look like it has all the stuff that we should learn during installation And what documentation I should follow from my above given two links?

View 3 Replies View Related

RAC/ASM Clusterware Installation :: Oracle RAC Installation With Guest OS OracleLinux6 On Virtualbox / Mac OS

Jun 7, 2013

I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.

if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.

View 0 Replies View Related

RAC/ASM Clusterware Installation :: Oracle 11GR2 Rac Installation In Vmware

Aug 28, 2013

I am installing RAC 11GR2 in VMWARE on OEL 6.3. Everything went smooth but when i tried to configure ASM , I get below messages. 

[oracle@RAC1 ~]$ /etc/init.d/oracleasm configure-bash: /etc/init.d/oracleasm: No such file or directory.

View 15 Replies View Related

Installation :: Oracle 11G Database For 64 Bit Windows Installation Error

May 6, 2013

I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005).

View 10 Replies View Related

RAC/ASM Clusterware Installation :: Oracle Grid 11g R2 Installation

Jul 11, 2013

I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download? 

View 2 Replies View Related

RAC/ASM Clusterware Installation :: Oracle Rac 11g Installation?

Sep 16, 2013

 Am planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid. 

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved