Tried to use the yum command "yum install gcc" but get the following error.
Error: cannot find a valid baseurl for repo:update
I think this is due to the "CentOS-Base.repo" file, which I've tried to update by changing the mirror URL's but no success.Then tried to find the rpms online ([URL]...
I am preparing to install grid infrastructure 11.2.0.3 on AIX 6.2 USING AIX LPARS. I am getting the following errors in the output when runningn the following command...
I am trying to install Oracle Database 11gR2 database on Oracle Grid 11gR2. I successfully installed Grid without errors. However, when installing the database, I got an OLR Integrity error during the prerequisit Check
OLR Integrity - This test checks the integrity of OLR on the local node. Expected Value : n/a Actual Value : n/a List of errors: - Permissons of file "/u01/app/oracle/product/11.2.0/grid/cdata/localhost/localhost.olr" did not match the expected value. [Expected = "0600"; Found = "0660"] - Cause: Cause of Problem Not Available - Action: User Action Not Available.
I'm doing some testes installing grid 11.2.0.3 32bits software on a OEL6 32bits (virtual box environment). The problem appeared where i ran root.sh script on node 1. The following error appeared to me:
clscfg: -install mode specified Successfully accumulated necessary OCR keys. Creating OCR keys for user 'root', privgrp 'root'.. Operation successful. CRS-4256: Updating the profile
I am new to this forum. I want to install XE 11g Release 2 in windows 7 64 bit. Can I intall 'Oracle Database Express Edition 11g Release 2 for Windows x32' or is there is 64bit version?
Share 11g Release 2 Grid infrastructure and RAC installation experience on Sun SPARC. Any documentation which provide complete information from server setup to database setup.
I am setting up a RAC cluster in Oracle 11.2.0.3 on two Windows 2008R2 nodes.I have completed all the pre-installation tasks would like to verify this by running:cluvfy comp sys -p database -n allusing the standalone download of cluvfy - I haven't installed any Oracle software as yet. This completes successfully on the remote node but fails on the local node (whichever one I run it from).
There is a lot of output but these seem to be the key problems: [1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [WindowsSystem.deleteService:876] _WS_ deleteService2: node PRDAT217 Service OracleRemExecService result: 0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:91] NativeResult: The String obtained is0|Access is denied.[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:99] The status string is: 0[1852@PRDAT217] [Worker 3] [ 2013-10-01 14:44:45.190 BST ] [NativeResult.<init>:112]
I am trying to install Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox/Mac OS.But getting problem to set network & ip setting and yum is not able to reach oracle repository.
if anyone tried installing Oracle RAC installation w/ guest OS OracleLinux6 on Virtualbox on intel based Mac OS.
I am using newstart cluster software. currently I have two blade servers in my system and I have configured cluster as well. right now I have one issue. I am using the ip address of 10.34.14.0/28 network for cluster but this can not be accessed from all network so I want to use different range of IP of 10.68.1.0/28 network in the same blade servers. Can I configure two different floating (cluster) IP? the first IP range is for signalling and second IP range 10.68.1.0/28 network is for OMM. I need to use both IP in two blade servers.
We're trying to utilize Oracle RAC 11.2. We want to have two servers in our grid. These two server are installed on a VM using Hyper-V software.
common storage for asm is also developed on a VM using FreeNAS software.Now, when we try to install Grid Infrastructure the disk that is recognized as a extra drive in both servers are disabled and we can't select it as ASM storage. The OS we're using is Windows Server 2008 R2.I have to say the IP requirements are considered and the servers have two IPs.
I want to install Oracle Grid software 11g R2. What is the Latest Oracle Grid software 11g R2 version available?Is it 11.2.0.1 or 11.2.0.3?If it is 11.2.0.3, is it available in metalink download, because I see only 11.2.0.1 version in metalink download?
Am planning to install oracle RAC 11g on linux server. Have doubt on installation of clusterware or grid infrastructure first .?I think grid infrastructure covers clusterware and ASM both and then oracle 11g software to be installed. But how to download grid insfrastructure software. Will it come with oracle 11g software..? or need to download it seperately.? Because when i try to download oracle RAC 11g which gives link to download the 11g software not grid.
I am getting "ORA-03114: not connected to ORACLE" while installing "Oracle Database 11GR2" on "Oracle RAC 11R2" cluster setup. I am getting this error at the time of "Oracle Database Configuration Assistant" configuration reaches till 39% on HP-UX 11.31 IA64 platform.
Is it possible to upgrade GI 11.2.0.1 Enterprise Edition version to 11.2.0.3 STANDARD EDITION?
We have 2 Node RAC with 10.2 DB SE. Last time I think by mistake or not knowing the licensing information GI was upgraded to EE 11.2.0.1 by somebody or may be whatever version of GI is used, it has nothing to do with the license?
I have heard that I can upgrade Grid Infrastructure, but to Standard Edition. Does GI also comes with SE and also just want to know that can I perform this upgrade?
I want to upgrade (out of place) Grid Infrastructure to latest version of 11.2.0.3 and then PSU on top of that.
GI HOME and DB HOME are separated. Database I want to upgrade later on, not with this clusterware upgrade. I have download p10404530_112030_Linux-x86-64_3of7.zip from MOS for upgrading GI.
grid@db1p [rec]: /home/grid > crsctl query crs softwareversion Oracle Clusterware version on node [db1p] is [11.2.0.1.0] grid@db1p [rec]: /home/grid > crsctl query crs activeversion Oracle Clusterware active version on the cluster is [11.2.0.1.0]grid@db1px [ec]: /home/grid > sqlplus / as sysasm
[code]....
1) Is this the correct p10404530_112030_Linux-x86-64_3of7.zip to upgrade GI from 11.2.0.1 to 11.2.03?
2) Do I need a COMPLETE DOWNTIME to upgrade GI on 2 node RAC where DB is STANDARD EDITION but Clusterware is 11.2 as you have seen above..
3) Will this ASM version will also be upgraded along with GI upgrade installer or it must be upgrades separately after GI Upgrade?
When I use 'ONSCTL PING' to test the ons status, it says: configure localport and remoteport directives and attempt to start ONS server again.ons is not running.The content of D:app11.2.0gridopmnconfons.config is:
localport=6100 # line added by Agent allowgroup=true usesharedinstall=true remoteport=6200 # line added by Agent nodes=rac1:6200,rac2:6200 # line added by Agent
The content of D:app11.2.0gridopmnconfons.config.rac2 is: localport=6100 # line added by Agent allowgroup=true usesharedinstall=true remoteport=6200 # line added by Agent nodes=rac1:6200,rac2:6200 # line added by Agent
The configuration file is almost the same in rac1.But the output of 'srvctl status nodeapps' is :
ons is enabled ons is running on node1:rac1 ons is running on node2:rac2
tried to mount a big endian asm disk (AIX for example) on little endian env (linux x86)? I have a disk that KFED is able to read but ASM is unable to mount it due to endianess incompatibility.
We try to upgrade the 10g to 11g oracle instance and asm instance.Below steps we r done;
1)First we are install the 11.2.0.3 database and grid infrastructure in separate home.
2)after that i try to upgrade asm instance so i drop old 10g asm localconfig cd $ORACLE10g_HOME./localconfig deletecd $ORACLE11g_HOME./localconfig add but here i can not find localconfig Note:database and grid installed without error....
3)Even we are try dbua but it run 10g dbua we are not able to run dbua for 11g
4)inventory is corrupted how to recreate inventory
5)provide the steps for upgrade 10g asm to 11g asm
I'm a long time Oracle DBA but have only recently started with RAC and have never done any patching or upgrades in a RAC environment.
My environment consists of a 2 node RAC cluster, and 2 physical standbys at separate remote locations.
The database, GI, ASM, and clusterware are all at version 11.2.0.1.
I want to upgrade all components to the latest patchset which is 11.2.0.3. Eventually I also want to apply the latest PSU.
Can I do this without down time? It is a mission critical database where downtime could conceivably endanger lives. If it can't be done with zero downtime, then downtime must be kept to an absolute minimum (minutes, not hours).
I suspect the clusterware needs to be patched first and I do not know whether I can do it on one node at a time.
I'm installing Oracle RAC 11.2.0.3 on RHEL6.3. Since the asmlib RPMs are not provided any more (for RHEL6) I am now able to use either a whole disk or a partition.
which method is the better one, what are the advantages and disadvantages of these methods?
Is there a difference performance wise if ASM gets two LUNs of 1.7TB (DATA) and 0.6TB (FRA) respectively compared to 17 LUNs of 100GB each (for DATA) and 6 LUNs of 100GB each (for FRA)? Is there a recommended size from Oracle?