RMAN Production To Validation Database Refresh Until SCN
Nov 13, 2011
I am trying to refresh the validation database with the old production backup i.e. our requirement. I have given the rman script i have executed and the output error message amd the rman configuration setting. Plus in the next post ill post the current sucessfully running RMAN script for your reference.
rman TARGET sys/passwd@Production CATALOG rman_pmxp/rman@catlog AUXILIARY sys/passwd @validation
RMAN> show all
2> ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 90 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'H:\backups\DB_Sunday_Backup\Prod_%d_%F.rman.ctl';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '%F';
[code]...
View 1 Replies
ADVERTISEMENT
Oct 13, 2012
I will have to proceed with Oracle 9 database refresh from production server to integration server. 5 biggest schemas must be exported and imported. They constitute 97% space used in a database. This is very big database so I would like to be sure that everything will go smoothly. That is why i want to ask you some questions.
Have you got any clues for me before I start with exp/imp? From my side i will tell you that I will have to exp/imp schema by schema because there is small space both on production and integration disk for a dump. First thing I thought are dependencies between schemas that are exported and that which are not, and also between schemas that are exported/imported one by one.
This is procedure that I plan:
For every schema that is to be refreshed
{
1. Export schema with ROWS=N CONSTRAINTS=Y
2. EXPORT schema with ROWS=y CONSTRAINTS=N
3. Import schema from step one
4. Disable all the foreign key constraints using ALTER TABLE DISABLE CONSTRAINT.
5. Import schema with rows
}
ALTER TABLE ENABLE CONSTRAINT
With above procedure i think that I will avoid problems with dependencies between schemas exported/imported one by one. But my concern is if there are any dependencies between those schemas and schemas that are not exported. Is there an way to check it before refresh ?
View 4 Replies
View Related
Oct 31, 2012
Steps to Refresh test Oracle 9i schema from production schema on a Windows platform..
View 3 Replies
View Related
Oct 9, 2012
I have One Production and one logical standby database . Due to tape problem we are unable to take backups of primary . And due to business , we cannot take back up on disk in hot period(Bank database ) .
If i take logical standby database backup(level 0 ) using RMAN , then will i be able to restore it on production dtbs (In case Production down) ? . Logical standby is in sync with primary .
View 2 Replies
View Related
Feb 22, 2011
Would like to know if I can replicate Production database (10.2.0.2) to Test (10.2.0.4).
tell me the process to do that on windows environment.
I wonder if I can do it with two different oracle versions?
View 4 Replies
View Related
Apr 27, 2013
Oracle 11g default server process is dedicated select distinct server from v$session; dedicated
Which server process is used in the oracle 11g Production? if the database is connect to an online application?
View 19 Replies
View Related
Mar 23, 2011
I have a table which contains data of all calcualted payements for a Land for a particular period i.e. for a Land 124 for the duration of Jan-2010 to Mar-2010 100 rupees rent is paid to the owner.Requirement here is that for a particular duration i.e is for Jan-2010 to Mar-2010 system calculation of rent for a land file multiple times where the table would contain history of each transaction i.e. a user can calculate for a Land 124 for duration fo Jan-2010 to Mar-2010 rent more than ten times and there would be ten records in the table but only one record out of these would be valid where the user cannot calcualte rent for Lnd 124 for Jan-2010 to Mar-2010 without updating the status of the last record in the table for the same land and duration to invlaid. I want to add this business validation through triggers as i am not able to do so through check constarinst.I want to ensure that only one record should be valid for a particular land for a particular duration since row level triggers do not allow us to query the table ion which the trigger is executing i am trying to use statement level trigger but i have a few doubts here: Incase of a Before Insert statement level trigger does the trigger have access to the data which is being inserted into that the table cause whenever a record is being inserted into a table the systen would check through the trigger that if there is a valid (payment_status is valid) payment record in the table for that same land file and same duration.If there is a valid record then the trigger would through an exception. I know you can use a row level trigger with an autonomous transaction should work wihtout giving the mutating table error issue but i wont to know if using a statement level trigger here is feasible!!
View 11 Replies
View Related
Jul 24, 2012
: I noticed three data files on my standby show's they are corrupted. What will be the easy and fast way to sync them up from my production database?
View 1 Replies
View Related
Aug 27, 2012
I got following error when i am gathered stats on Schema level.
SQL> EXEC dbms_stats.gather_schema_stats(ownname=>'KDB', estimate_percent=>dbms_stats.auto_sample_size,cascade=>TRUE, force=>TRUE);
BEGIN dbms_stats.gather_schema_stats(ownname=>'MFDB', estimate_percent=>dbms_stats.auto_sample_size,cascade=>TRUE, force=>TRUE); END;
*
ERROR at line 1:
ORA-20003: Specified bug number (9196440) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 15342
ORA-06512: at "SYS.DBMS_STATS", line 15688
ORA-06512: at "SYS.DBMS_STATS", line 15766
ORA-06512: at "SYS.DBMS_STATS", line 15725
ORA-06512: at line 1
SQL> EXEC dbms_stats.gather_schema_stats(ownname=>'CDC_DATA', estimate_percent=>dbms_stats.auto_sample_size,cascade=>TRUE,DEGREE=>10);
BEGIN dbms_stats.gather_schema_stats(ownname=>'CDOMIG_DATA', estimate_percent=>dbms_stats.auto_sample_size,cascade=>TRUE,DEGREE=>10); END;
*
ERROR at line 1:
ORA-20003: Specified bug number (9196440) does not exist
ORA-06512: at "SYS.DBMS_STATS", line 15342
ORA-06512: at "SYS.DBMS_STATS", line 15688
ORA-06512: at "SYS.DBMS_STATS", line 15766
ORA-06512: at "SYS.DBMS_STATS", line 15725
ORA-06512: at line 1
View 5 Replies
View Related
Feb 1, 2011
I have to migrate the current production database to test 10.2.0.4 on windows. Any non-export way to upgrade 9i to 10 g?
i have following steps
1) ALTER DATABASE BACKUP CONTROLFILE TO TRACE
2) shutdown oracle 9i database on server A
3) copy database file, controlfile, redolog, and other files to new server B
4) alter the controlfile backup with new location of bdump, udump, and log file and data file locations
5) user oradim ORADIM -NEW -SID SID [-INTPWD PASSWORD ]-MAXUSERS USERS
-STARTMODE AUTO -PFILE ORACLE_HOME\DATABASE\INITSID.ORA
6) start dabase in upgrade mode
7) run catpat.sql and util102.sql
8) take backup
9) open database for users
View 3 Replies
View Related
Dec 3, 2010
We are planning to consolidate our Oracle Production DB into one server. We are basically a windows shop. Is it feasible to run 8 production Oracle DB in one windows server. All the DB are not really transaction intensive DB. 2 DB in the size of 300GB and others all DB falls under average size of 40GB.
I can take care of the HD slicing so Oracle does not enter into IO bottleneck. We are planning to go for external NAS or SAN for storage.
My main concern is on processor usage. The processor we are thinking about is Intel Xeon Quad Core x 2nos. Will there be a processor bottleneck or is there way in Oracle to assign processor usage(I belive there is no much tweaking options here)
View 6 Replies
View Related
Sep 13, 2011
I need to use Data Pump for the first time on my production Database.Currently on Testing Database, when i am taking schema level export there are no errors or warnings in the log file but when i importing it gives fallowing ORA in the import log file. i searched on google,the only way i found is to recompile the invalid objects. how to avoid this warnings in log file.
"ORA-39082: Object type ALTER_PROCEDURE:"QUANTISV4"."P_CTM_ABN_INVST_EQUITY" created with compilation warnings"
View 4 Replies
View Related
Jun 17, 2012
I need to refresh a PROD database into TEST database. The PROD and TEST runs on 10g. I need a full refresh. Is there any pre req's which i should keep in mind ?.
View 1 Replies
View Related
May 25, 2010
We have quite a number of sessions in database MES (production) coming from another machine.
From v$session, the program is oracle@WID27 (TNS V1-V3). This WID27 (hostname) consists of quite a number of development databases inside. We have to trace which jobs are actually triggering this, as WID27 are not suppose to connect to production databases.
How can we tell whether the sessions came in is from dblink or from the machine itself?
View 3 Replies
View Related
May 3, 2011
I need to import data to production database. The database details are not in tnsnames.ora.
I am using easy connect method to connect to the database, since I am not able to edit tnsnames.ora.
Is there any way by which I can do the import ?
Can I do it like this
imp system/pwd@imp system/pwd@'(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx)(PORT=1521)))(C
ONNECT_DATA=(SID=xx))' ......................
View 4 Replies
View Related
Jun 7, 2013
i am using 11.2.0.3.0 version db on Linux x86 64-bit...how to export the database statistics from Production to staging .
View 9 Replies
View Related
Feb 16, 2011
How can we refresh a database ?
View 3 Replies
View Related
Aug 24, 2012
Oracle 11.2.0.1 and 11.2.0.3.
Can rman refresh database from 11.2.0.1 to 11.2.0.3?
In another words, my source database is 11.2.0.1, my target database is 11.2.0.3
I want to refresh target database from source database. Is it ok since version is different?
View 6 Replies
View Related
Aug 14, 2010
I am getting ORA -32320 when I tried to fast fresh MVs that were truncated.I am able to complete refresh all MVs. However, some MVs are still giving me ORA-32320 when I try to do fast refresh even after complete refresh.
DBMS_MVIEW.EXPLAIN_PLAN says the MVIEW can be fast refreshed.
ERROR at line 1:
ORA-32320: REFRESH FAST of "dev"."Claim_line" unsupported after cointainer table
PMOPs
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 803
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 860
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 841
ORA-06512: at line 1
Quote:ORA-32320:
REFRESH FAST of "string"."string" unsupported after container table PMOPs Cause: A Partition Maintenance Operation (PMOP) has been performed on the materialized view, and no materialized view supports fast refersh after container table PMOPs. Action: Use REFRESH COMPLETE. Note: you can determine why your materialized view does not support fast refresh after PMOPs using the DBMS_MVIEW.EXPLAIN_MVIEW() API.
how to again make the MVs fast refreshable?
View 4 Replies
View Related
Jul 12, 2012
DB_VERSION=10.2.0.4
OS_VERSION=Windows 2008 R2
RAM_SIZE=32 GB
We have 2 production (OLTP) database( DB1 (18GB) and DB2 (200GB) ) on a server out of which DB2 database has almost 20 Materalized Views all (REFRESH FORCE ..ON DEMAND).
I have already informed the client that this is not the OLAP database where you are going to make use of the M Views for reporting purpose. However currently the client does not have any alternative.
Breif details :-
Out of 20 M Views 3 refresh once a week and where as the rest refresh every night daily.
We are currently testing a new website for which we had to re-schedule all M Views from their Old timings to New Timings i.e. Daily Basis.
But post re-scheduling the database performance was badly degarded as the database was too slow also the number of archives increasted to 300GB which was earlier 100 GB.To resolve the issue , we had to go back to the old timings and the database is currently working fine.
Requirement :-Client is looking out for an alternative solution as he needs to once again change the M View refresh time i.e. Daily Refresh.We already have 2 Oracle Instance on the server
Questions :-
1. Can i create another database ( sayTESTDB2 ) in no archivelog mode and create a db link to reduce the load on the server ?
2. If Yes .. Then is there any relavent link /example or Metalink Note ID for the same??
3. What all parameters do i need to consider while creating a DB Link ?
3. Out of 32 GB RAM , I have given 4GB and 8GB sga_max to DB1 and DB2 Respectively . Also the cpu utilization is normally 50-%60%.
Since currently we do not have any Licence for other server .. Can i make use of the same server ( i.e. creating 3 rd Oracle Instance )?
Since the main intention of this activity is reduce the load from the DB2 onto TESTDB when the daily refresh has set once again
View 1 Replies
View Related
Jul 26, 2012
I am the junior DBA first time i need to do Database Refreshment on UNIX platform.
1. Database Names are different and mount points are different.
2. Synonyms and dblinks are should be retained.
How to do this and what are the steps i need to follow.
View 6 Replies
View Related
Mar 3, 2012
How to perform db refresh.
View 1 Replies
View Related
Oct 3, 2012
version 10203 on windows (old db on solaris 8170)
i Have to refresh database data, No of users/schemas are 400+. fastest way to do that would be to do full exp/imp.but 1st drop current users cascade. (any command to drop all users in with one command?)then validate all all tables/schemas are same & up-to-date. i am thinking to check full exp logs on old & new db.(what that can take forever manually going through thousands of tables etc)
View 7 Replies
View Related
Feb 2, 2013
I was using physical standby but my primary database had had some HW issue.So I had activated standby database to handle production.During 3 months, standby database was our live database and our old primary was unavailable.Now HW issue on primary has been fixed.And I want to set again my old configuration : means set primary and standby db.
I'm trying this :
1) check the SCN on old primary
2) Rman incremantal backup from scn
3) on primary db : catalog
4) on primary db : recover database noredo
View 1 Replies
View Related
May 30, 2012
I have to compare my SVN source code (packages, views etc) with the production code in the database like views etc (actually we are not sure that what we have in the svn is the final version of production code, we have objects created in the production database, but we don't have latest scripts for that. we have to deploy the svn code in the UNIX box).
So here the comparison is between the OS files and the database objects.
I thought I would get scripts of all the packages, views etc from the production database by using DBMS_METADATA or some utility and save the code in OS files then compare one svn file with OS file manually by using some comparison tools e.g toad provide one comparison tool.
View 5 Replies
View Related
Jul 25, 2012
I tried to clone a 2 node rac database to single instance non rac database using existing backup. I have not used connectivity to target or catalog. rman duplicate finished with below messages:
rman auxiliary sys/******@dbracdup
RMAN> duplicate database to dbrac spfile backup location '/oracle/backup';
...
...
Finished recover at 25-JUL-12
Segmentation fault
And the database was in mount stage, and when i tried to open database it failed with below error:
SQL> alter database open;
alter database open
*
ERROR at line 1:
ORA-19838: Cannot use this control file to open database .
View 4 Replies
View Related
Dec 21, 2012
creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
[code]....
provide any work arounds to proceed further in creating the standby database.
View 1 Replies
View Related
Mar 14, 2012
How one should know whether RMAN is using target database control file or using separate catalog database. Also what one should do if he dont have catalog users credentials.
View 3 Replies
View Related
Aug 23, 2010
I have failed to duplicate target db for standby from active db using spfile with the following errors:
RMAN-03009: failure of backup command on prim1 channel at 08/11/2010 05:25:09
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
[Code].....
The script has successfully created on standby db all controlfiles and also has copied 2 data files DATA01.DBF and DATA02.DBF into the correct location. Then the errors above kicked in and stopped the rman dup process.
View 4 Replies
View Related
Mar 4, 2013
I have created database with 11.2.0.3 in RHEL 5. I have catalog database(RMAN) with version 10.2.0.1 and 5 databases with different versions(10.2.0.1,10.2.0.3,10.2.0.5) registered with this catalog databases.
Now I want to register the 11.2.0.3 database with catalog (RMAN) database.
Am getting error while I register :
#rman target / catalog=rman/rman@rman
connected to target database: TEST (DBID=12345678)
connected to recovery catalog database
RMAN> register database;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of register command on default channel at 03/04/2013 10:27:12
RMAN-10015: error compiling PL/SQL program
RMAN-10033: error during compilation of job step 1: ORA-04023: Object RMAN.DBMS_RCVCAT could not be validated or authorized
View 9 Replies
View Related
