Standby Data Files - Production Database?

Jul 24, 2012

: I noticed three data files on my standby show's they are corrupted. What will be the easy and fast way to sync them up from my production database?

View 1 Replies


ADVERTISEMENT

Data Guard :: How To Transfer Redo Log Files To Standby Database

May 29, 2010

How to transfer redo log files to standby database..

View 1 Replies View Related

Data Guard :: Transfer Archived Log Files To Standby Database

Oct 8, 2011

1> Does dataguard in 10g use ftp/rsh to transfer archived log files to standby database or some other protocol?

2> In my primary database, archives are getting generated normally, there is no error in alert log file. But archives are not getting transferred to standby database. I am able to connect through sys user from primary server to standby database & vice versa.

Also, tnsping is working fine.

All was working fine till 2 days back & no parameter has been changed from database side. I am not able to transfer the file manually through FTP to standby server. Does it is the problem? Or dataguard doesnt use FTP protocol to transfer the files?

View 2 Replies View Related

Data Guard :: How To Add Both Online And Redo Log Files To Standby Database

Sep 13, 2011

I've only successfully duplicate a standby database.

from the alert log

ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: 'D:ORA102CTAREDO01.LOG'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.

[code].....

when I tried to add the online and standby redo log, it error out

SYS@CTA>select logdetail.member, loggroup.group#, loggroup.sequence#, loggroup.archived, loggroup.status lg_status, logdetail.status ld_detail, logdetail.type
2 from v$log loggroup join v$logfile logdetail
3 on loggroup.group# = logdetail.group#;
MEMBER
--------------------------------------------------------------------------------
GROUP# SEQUENCE# ARC LG_STATUS LD_DETA TYPE
---------- ---------- --- ---------------- ------- -------

[code].....

based on my understanding from [URL] ....

Quote:

As part of the duplicating operation, RMAN automates the following steps:

Creates a control file for the duplicate database

Restores the target datafiles to the duplicate database and performs incomplete recovery by using all available incremental backups and archived redo logs

Shuts down and starts the auxiliary instance (refer to "Task 4: Start the Auxiliary Instance" for issues relating to client-side versus server-side initialization parameter files)

Opens the duplicate database with the RESETLOGS option after incomplete recovery to create the online redo logs (except when running DUPLICATE ... FOR STANDBY, in which case RMAN does not open the database) when duplicating for standby database it does not create online redo logs. Duplicating a standby database does not creates online redo logs.

how should I add the online and standby redo logs. If I transfer the redo logs from primary to standby, it always encountered the the following error

Dump file d:ora102ctadumpcta_arc0_3624.trc
Tue Sep 13 19:21:53 2011
ORACLE V10.2.0.4.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the OLAP, Data Mining and Real Application Testing options
Windows XP Version V5.1 Service Pack 2

[code].....

View 1 Replies View Related

Data Guard :: Standby Database Temp Files Go Missing?

Jun 5, 2013

I performed a switchover test of my Exadata databases last night. Both databases are running 11.2.0.2 (BP7) on top of GI of the same version.I'm using Data Guard Broker to administer the Data Guard configuration.

I have, as you'd expect, the standby_file_management set to AUTO, so any file changes/additions/deletions that are made on Primary should be applied to Standby also.And they have been. Until last night.

When I had switched over to running Primary on the Standby site, I got this error message:

Tue Jun 04 22:27:12 2013
Errors in file /u01/app/oracle/diag/rdbms/exdw1pdg/exdw1pdg1/trace/exdw1pdg1_ora_26630.trc:
ORA-25153: Temporary Tablespace is Empty

I checked and my two temp tablespaces existed, but had no files in them. These files are 200Gb and 448Gb in size, so you'd think you'd notice them going missing. This wasn't by any means the first time we switched over (and, yes, I did create temp files for Standby when I built it and first switched over)

We've switched over to Standby multiple times and even ran a whole day's processing against it and haven't seen this. Ultimately, it wasn't a big deal, because I just created a tempfile for each of the tablespaces and off we went.Nothing in MOS seems to mention something like this. Basically, it looks like the switchover process decided to eat my tempfiles but keep my temp tablespace defintion. Odd.

View 5 Replies View Related

Data Guard :: Restoring Logical Standby Rman Backup On Production

Oct 9, 2012

I have One Production and one logical standby database . Due to tape problem we are unable to take backups of primary . And due to business , we cannot take back up on disk in hot period(Bank database ) .

If i take logical standby database backup(level 0 ) using RMAN , then will i be able to restore it on production dtbs (In case Production down) ? . Logical standby is in sync with primary .

View 2 Replies View Related

Moving Files On Physical Standby Database?

Oct 19, 2011

We're currently in a situation where the primary database server fs size does not match the standby database server fs size.

Standby database filesystem is almost 100% utilized, and we suggested to move some of the datafiles first to avoid threshold alerts and archive gaps.

Now, if we're gonna move datafiles on the physical standby, I believe the process would be stop managed redo apply -> shutdown standby -> OS move -> startup mount -> alter rename -> start managed redo apply. Is this correct? If not, how?

Also, would it have an effect if the controlfiles of primary and standby do not match because of the movement?

View 1 Replies View Related

Data Guard :: Apply Standby Redo Log To Physical Standby Database

May 26, 2013

I have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.

Tried the following methods.

1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.

2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)

View 5 Replies View Related

Server Utilities :: Use Data Pump For First Time On Production Database

Sep 13, 2011

I need to use Data Pump for the first time on my production Database.Currently on Testing Database, when i am taking schema level export there are no errors or warnings in the log file but when i importing it gives fallowing ORA in the import log file. i searched on google,the only way i found is to recompile the invalid objects. how to avoid this warnings in log file.

"ORA-39082: Object type ALTER_PROCEDURE:"QUANTISV4"."P_CTM_ABN_INVST_EQUITY" created with compilation warnings"

View 4 Replies View Related

Server Administration :: Import Data To Production Database - Details Are Not In Tnsnames.ora

May 3, 2011

I need to import data to production database. The database details are not in tnsnames.ora.

I am using easy connect method to connect to the database, since I am not able to edit tnsnames.ora.

Is there any way by which I can do the import ?

Can I do it like this

imp system/pwd@imp system/pwd@'(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxx)(PORT=1521)))(C
ONNECT_DATA=(SID=xx))' ......................

View 4 Replies View Related

Data Guard :: Apply Patches On Oracle Database With Logical Standby Database?

Apr 22, 2011

I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.

I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?

1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site

View 2 Replies View Related

Data Guard :: Flashback Snapshot Standby Database Or New Primary Database After Failover?

Aug 30, 2013

If flashback is enable in physical standby database 1. If we failover at 11AM can I flash back NEW primary database to 6 AM ? 2. if I convert physically standby database to snapshot standby database at 11AM ,  Can I  flashback snapshot standby database to 6 AM and do some works on it (DML operations)  then   converting the snapshot standby database into physical standby database ?  

View 1 Replies View Related

Data Guard :: Creating Standby Database From Active Database Using RMAN

Dec 21, 2012

creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.

Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
[code]....

provide any work arounds to proceed further in creating the standby database.

View 1 Replies View Related

Data Guard :: Switch (convert) Primary Database To Standby Database?

Jan 30, 2013

I have installed oracle 11g standard edition one and created both primary and standby database. now i want to know how to switch(convert) primary database to standby database.

View 8 Replies View Related

Data Guard :: Unable To Get Data Of Primary In Standby Database (dataguard)

Jan 16, 2013

i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..

Primary alert log

Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production

[code]....

View 1 Replies View Related

Data Guard :: Unable To Get Data Of Primary In Standby Database

Jan 16, 2013

I configured dataguard in my local system.

1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?

2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)

ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'

[code]....

3)wen i try to open standby database in read only mode gives below error..

ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'

View 31 Replies View Related

Data Guard :: How To Get SQL Plan In Standby Database

Mar 14, 2012

I want to get the execute plan of a sql in standby database(read only),but failed,how can i do?

SQL> explain plan for select count(1) from hxl.tb_objects;
explain plan for select count(1) from hxl.tb_objects
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 2
ORA-16000: database open for read-only access

SQL> select count(1) from hxl.tb_objects;

COUNT(1)
----------
22238018

SQL> select open_mode from v$database;

OPEN_MODE
----------
READ ONLY

View 4 Replies View Related

Data Guard :: How To Create Standby Database For RAC

Mar 10, 2010

I have two node rac running on SAN with ASM , i want to configure a single instance standby database for this.

View 2 Replies View Related

Data Guard :: Standby Database Architecture

Jul 8, 2011

To have physical standby database, the hardware and software versions should be same, including patch sets?

View 3 Replies View Related

Data Guard :: 10g Physical Standby Database

Sep 17, 2012

DB1 <Primary> - Production
DB2 <Physial Standby> - DR

I will need to startup my DB2 in DR segment for testing.If i perform the below, will it affect my Production DB? I need it to be up and running as well.

DR:
recover managed standby database cancel;
shutdown immediate;
startup nomount;
alter database mount standby database;
recover standby database until cancel;
alter database activate standby database;

View 11 Replies View Related

Data Guard :: Drop Standby Database

Sep 7, 2012

Oracle RDBMS 11.2.0.2 on RHEL 5.6.

I need to drop standby database completeley and rebuilt physical standby for the same database. We identified there are lot of inconsistencies between primary and standby. How do i need to remove the standby? And what is the best procedure?

View 2 Replies View Related

Data Guard :: Creation Of Standby Database

Dec 7, 2010

I was able to create the standby database on different server with the same name for the primary and standby database but I want to know that can I create a standby database with different database name than that of the primary database server.

View 1 Replies View Related

How To Avoid Table Data To Physical Standby Database

Jun 28, 2013

Our client requirement is to avoid table data to physical standby database.

View 3 Replies View Related

Data Guard :: Error While Connecting Standby Database

Apr 19, 2011

During data guard configuration i have receive an error while connecting to stanby database from primary database rman prompt.

rman target sys/srk786@orcli
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Apr 19 09:59:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: ORCLI (DBID=3754068166)
RMAN> connect auxiliary sys/srk786@stnd
[code]....

View 1 Replies View Related

Data Guard :: Refresh Primary Using Standby Database?

Feb 2, 2013

I was using physical standby but my primary database had had some HW issue.So I had activated standby database to handle production.During 3 months, standby database was our live database and our old primary was unavailable.Now HW issue on primary has been fixed.And I want to set again my old configuration : means set primary and standby db.

I'm trying this :

1) check the SCN on old primary

2) Rman incremantal backup from scn

3) on primary db : catalog

4) on primary db : recover database noredo

View 1 Replies View Related

Data Guard :: How To Create Standby Database On Same Machine

Apr 4, 2012

how to create the standby database on the same machine. os-window xp 2000(32 bit window) oracle 10g 10.2.0.1.0.

View 4 Replies View Related

Data Guard :: How To Defile Logfile Of Standby Database

Feb 18, 2012

How can i define the logfile of standby database when using then duplicate database to create the standby database? the flowing command can not run.

run{
duplicate target database for standby dorecover nofilenamecheck
logfile group 1 ('/u01/app/oracle/oradata/oracl/redo1_1.log','/u01/app/oracle/oradata/oracl/redo1_2.log') size 512M,
group 2 ('/u01/app/oracle/oradata/oracl/redo2_1.log','/u01/app/oracle/oradata/oracl/redo2_2.log') size 512M,
group 3 ('/u01/app/oracle/oradata/oracl/redo3_1.log','/u01/app/oracle/oradata/oracl/redo3_2.log') size 512M;
}

View 3 Replies View Related

Data Guard :: Backups On Physical Standby Database (RAC)?

Nov 23, 2011

I have set up a single instance standbys for rac databases. Now, I need to offload the backups from the primary on to the standbys.

1. cancel managed recovery

2. connect to target(standby) and catalog and backup the standby

3. put standby in managed recovery mode.

I think following these steps, I can restore primary(?). Now, My question is, how can I use these standby backups to clone/refresh databases? I tried it by connecting to target(primary), catalog and auxiliary but rman is using the primary backups instead of standby's to refresh the auxiliary database.

View 7 Replies View Related

Data Guard :: Oracle Standby Database Recovery

Mar 31, 2011

i have done oracle data guard between two databases (database A is the primary) and (database B is the standby), and it was working fine for two weeks, then the network admin did some changes on the firewall on standby side, which made the primary database can not write on standby redo log , so archives was generated on primary and do not generated on standby by, now we solve the firewall probelm and new archives generated on primary is generated on atandby too, but now i have a gap in archives on standby database and standby database now is not synchronized with primary database, and data changes happen on primary is not reflected on standby, also archives that were generated on primary and did not generated on standby during the problem time is not registered in V$ARCHIVED_LOG neither on primary database nor on standby database

View 1 Replies View Related

Data Guard :: Upgrade Primary And Standby Database?

Apr 30, 2012

I have a primary and standby DB using data guard 10.2.0.3.I want to upgrade oracle to 11G.I know that primary and standby should have same version even if data guard will not work again.I want to know what is the steps by steps action to properly upgrade both DB : primary and Standby.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved