How To Avoid Table Data To Physical Standby Database
Jun 28, 2013Our client requirement is to avoid table data to physical standby database.
View 3 Replies
ADVERTISEMENT
Data Guard :: Apply Standby Redo Log To Physical Standby Database
May 26, 2013I have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.
Tried the following methods.
1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.
2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)
Data Guard :: 10g Physical Standby Database
Sep 17, 2012DB1 <Primary> - Production
DB2 <Physial Standby> - DR
I will need to startup my DB2 in DR segment for testing.If i perform the below, will it affect my Production DB? I need it to be up and running as well.
DR:
recover managed standby database cancel;
shutdown immediate;
startup nomount;
alter database mount standby database;
recover standby database until cancel;
alter database activate standby database;
Data Guard :: Backups On Physical Standby Database (RAC)?
Nov 23, 2011I have set up a single instance standbys for rac databases. Now, I need to offload the backups from the primary on to the standbys.
1. cancel managed recovery
2. connect to target(standby) and catalog and backup the standby
3. put standby in managed recovery mode.
I think following these steps, I can restore primary(?). Now, My question is, how can I use these standby backups to clone/refresh databases? I tried it by connecting to target(primary), catalog and auxiliary but rman is using the primary backups instead of standby's to refresh the auxiliary database.
Data Guard :: Physical Standby Database Backup
May 9, 2013I have Oracle database on Oracle 10g R2 with physical as well as logical standby database.
1) Is is necessary to take Physical standby database backup?
2) If 1) yes then Which RMAN backup is preferred?with catalog or default?How to take backup as different location?
3)how to Restore that backup?How to ensure backup is valid?
Data Guard :: Configure Physical Standby Database?
Jul 17, 2012step by step procedure to configure physical standby database.....
i have to create on windows not in linux...so simple step by step procedure,once configured it should be up and running;
Data Guard :: Backups On Physical Standby Database?
Feb 21, 2013I am using data guard and a physical standby database.How to assign backups on physical standby database to reduce the load on Primary database.
environment: windows
Database version:11.2.0.1.0
What are the pro and cons on assigning RMAN backups jobs to physical standby database?
Replication :: How To Create Physical Standby Database Without Data Guard
Sep 16, 2009I would need to create a physical standby database for DR without using data guard. I like to know in more details like
1. What would be required to switch over to standby database in case of failure of primary database? Is it going to be a manual process each time, or can be automated using scripts?
2. How the archive logs will be applied to standby database in timely manner to sync with primary database?
3. How the Primary database will be synch with Standby database once the issue resolved on primary database.
4. Where do I get a complete script to create physical standby database on Windows platform?
Data Guard :: Can A Logical Database Be Applied From A Physical Standby
Jul 25, 2013I have a setup where i have one physical and logical standby from a primary database. In case of switch over between primary and physical database my logical apply gets stopped. Can a logical database be applied from a physical standby ?
View 5 Replies View RelatedData Guard :: Unable To Create Physical Standby Database Using RMAN?
Nov 4, 2010why RMAN is unable to create physical standby database ?
RMAN> connect auxiliary sys/system@DGREPL
connected to auxiliary database: DGREPL (not mounted)
RMAN> connect target sys/system@REPL
connected to target database: REPL (DBID=2730563515)
RMAN> run{
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
[code]....
Data Guard :: Primary Database Is RAC And Physical Standby Is Single Instance
Mar 27, 2013I am using Oracle RAC 11.2.0.3 as primary database, we are going to start using Oracle data guard. So I am designing my infrastructure and planing to use Oracle 11.2.0.3 Single instance as my physical stand by database.
My question is it feasible to have my standby database as single instance while the primary is RAC? is it feasible to build my Oracle single instance standby database from the RMAN backup of the RAC primary database? Is there any restrictions (or any points to be taken into consideration) since my primary database is RAC while the physical standby is Oracle single instance?
in the below link
[URL].......
it was mentioned that primary can be RAC or single and same for standby, but my question is it feasible to have primary as RAC while standby as single instance? or it should be like each others?
The primary database can be either a single-instance Oracle database or an Oracle Real Application Clusters (RAC) database. Similar to a primary database, a standby database can be either a single-instance Oracle database or an Oracle RAC database.
Data Guard :: Truncate Table Effect On Physical Standby
Nov 20, 2009Are there redo generate during truncate operation even my primary database is in FORCE LOGGGING mode? How this will effect on physical standby database.
View 6 Replies View RelatedData Guard :: Alter Database Commit To Switchover To Physical Standby - Getting Ora-16416?
Apr 21, 2011alter database commit to switchover to physical standby; i am getting ora-16416 switchover target is not synchronized with the primary what to do
View 3 Replies View RelatedData Guard :: Possible To Convert Logical Standby To Physical Standby
Aug 30, 2013My steps for testing as below:
1.create a primary database
2.duplicate a physical standby database;
3.turn on flashback on both databases.
4.record SCN xxx on physical standby database.
5.convert physical standby to logical standby (using keep identity statement)
6.flashback to logical standby to xxx
7.convert logical standby to physical standby
8.using real time apply I got errors: Fast Parallel Media Recovery enabledManaged Standby Recovery starting Real Time ApplyMRP0:
Background Media Recovery waiting for new incarnation during transient logical upgrade procedure
Errors in file /home ora/ app/ oracle/ diag/ rdbms/ ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:ORA-19906: recovery target incarnation changed during recoveryManaged Standby Recovery not using Real Time ApplyErrors in file /home/ ora/app/ oracle/diag/ rdbms/ ora11gr1dg/ ora11gr1dg/ trace/ora11gr 1dg_mrp0_ 10120.trc:ORA-19906: recovery target incarnation changed during recovery
Errors appears every 10 seconds. Seems MPR0 is waiting for new incarnation for a long time. So am I.Standby database incarnation:
List of Database IncarnationsDB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time-------1 1 ORA11GR1 3853851354 CURRENT 1 08/09/2013 01:02:182 2 ORA11GR1 3853851354 ORPHAN 2127877 08/28/2013 19:22:01 BGV
Physical Standby Database To Logical Standby
Jul 17, 2013can i create physical standby database to logical standby database.
my structure
============
primary database--->physical standby-->logical standby
for fail over case ==>physical standby convert to primary and logical standby connected to current primary database.
Rename Database With Physical Standby?
Jul 23, 2010I need to rename an Oracle9i database on windows which has a physical standby database running on a different machine.
I have the steps to rename the primary database but am unsure of it's impact on the physical standby database. It seems like I will have to re-create the physical standby database, since renaming the primary database involves opening the db with "resetlogs". It's a production environment hence can't play with it without knowing the results.
Data Guard :: Physical Standby With Same SID
Sep 22, 2010I have to implement Physical standby using same SID. parameters required to set on Primary and standby. Also what entries are required to do in TNS file. Recently we have faced hardware failure.
View 10 Replies View RelatedMoving Files On Physical Standby Database?
Oct 19, 2011We're currently in a situation where the primary database server fs size does not match the standby database server fs size.
Standby database filesystem is almost 100% utilized, and we suggested to move some of the datafiles first to avoid threshold alerts and archive gaps.
Now, if we're gonna move datafiles on the physical standby, I believe the process would be stop managed redo apply -> shutdown standby -> OS move -> startup mount -> alter rename -> start managed redo apply. Is this correct? If not, how?
Also, would it have an effect if the controlfiles of primary and standby do not match because of the movement?
Can Logical Database Be Applied From Physical Standby
Jul 24, 2013I have a setup where i have one physical and logical standby from a primary database. In case of switch over between primary and physical database my logical apply gets stopped. Can a logical database be applied from a physical standby ?
View 2 Replies View RelatedCannot Open Physical Standby Database Read Only?
Dec 7, 2010Suddenly I can't open any of my physical standby databases read only. Alert log snippet and trace files follow post. I'm running 9.2.0.1.0 on all hosts, which are running AIX 5.2. I've successfully opened all physical standby databases read only numerous times in the past. Is it possible that these standby databases cannot be switched over to primary should the need arise?
Here's how I typically open a physical standby database read only:
alter database recover managed standby database cancel;
alter database open read only;
Errors in file /ora/product/9.2.0.1.0/rdbms/log/icps1_ora_27382.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-16000: database open for read-only access
Error 604 happened during db open, shutting down database
USER: terminating instance due to error 604
[code]...
Data Guard :: Recreating Physical Standby
Jun 4, 2010I have an issue whereby our standby instance was down for a couple of days and when it came back online we found an archivelog file was missing, so recovery only happened up to a point. It appears that the archivelog was deleted therefore we are unable to continue with this standby. We are now planning to rebuild the standby database. As far as i know all of the steps originally performed need not be performed to complete this task.
1. Shutdown standby
2. Delete all datafiles & redo logs
3. Copy over datafiles to respective directories
4. Copy online logs and archivelogs to standby.
5. Create a control file for standby database
6. Startup mount standby database
7. start redo apply
Data Guard :: Physical Standby Configuration
Mar 10, 2011I did the all necessary steps required for the physical standby configuration. My standby db is mounted but not able to open.
Below are the steps.
SQL> startup mount
ORACLE instance started.
Total System Global Area 1845493760 bytes
Fixed Size 2021568 bytes
Variable Size 452986688 bytes
Database Buffers 1375731712 bytes
Redo Buffers 14753792 bytes
Database mounted.
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_2='SERVICE=demodb' scope=both;
System altered.
SQL> ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2=ENABLE SCOPE=BOTH;
System altered.
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
Database altered.
SQL> recover managed standby database cancel;
Media recovery complete.
SQL> alter database open read only;
alter database open read only
*
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u002/app/OraDB10g/stdemo/oradata/system01.dbf'
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH; ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH
*
ERROR at line 1:
ORA-00600: internal error code, arguments: [kcrfrsetnab_found], [1], [136], [],
[], [], [], []
ORA-00600: internal error code, arguments: [kcrfrgv_scn7], [], [], [], [], [],
[], []
SQL> ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY;
ALTER DATABASE COMMIT TO SWITCHOVER TO PRIMARY
*
ERROR at line 1:
ORA-00600: internal error code, arguments: [kccocx_01], [], [], [], [], [], [],
[]
Data Guard :: Managing Physical Standby
Sep 17, 2013Today, I am learning dataguard 11.2.0.1. The docs said:A. Monitoring Standby DB Application of redo logs may be monitored by issuing the SQL command:
SQL> select client_dbid, process, sequence#, status from v$managed_standby;
In the primary database, the sequence# with the status “WRITING” would refer to the current redo log sequence#In the standby database, if the status of the process MRPO is “APPLYING LOG” and the status of the process LGWR is “IDLE”, then application of redo logs is up to dateI see that that MRPO at standby is "WAIT_FOR_GAP". How do I resolve this gap.
Move Data From Physical StandBy To Data Warehouse?
Oct 1, 2012We have this archicture:
OLPT DB --> OLPT DB (Physical Standby, active dataguard) --> Data warehouse DB
We only allowed to connect to OLPT DB (Physical Standby, active dataguard) from Data warehouse DB. If there is possibility to use some of Oracle "native" method of data extraction (replication) from OLPT DB (Physical Standby, active dataguard) to Data warehouse DB.
As far as I know we cannot create materialized view log in OLPT DB (Physical Standby, active dataguard) in order to do data replication, but maybe there is some others ways?
DataGuard - Archive Log Apply Gap In Physical Standby Database
Nov 23, 20101) The Primary Database is UP. The Physical Stand By Database is DOWN. The Current Archive Log Sequence is 99 in Primary.
We have to apply Archive Log from 51 to 99 to the Standby Database. But Unfortunately, there is no backup of those Archivelogs and the ArchiveLogs from 51 to 98 have got deleted at Primary end.
Now how will you apply these Archive Logs from Primary Database to Physical Standby Database?
Note : The Physical StandBy Database is DOWN.
Data Guard :: Cannot Open Physical Standby Read Only?
Dec 7, 2010Suddenly I can't open any of my physical standby databases read only. Alert log snippet and trace files follow post. I'm running 9.2.0.1.0 on all hosts, which are running AIX 5.2. I've successfully opened all physical standby databases read only numerous times in the past. solve this? Is it possible that these standby databases cannot be switched over to primary should the need arise?
Here's how I typically open a physical standby database read only:
alter database recover managed standby database cancel;
alter database open read only;
Errors in file /ora/product/9.2.0.1.0/rdbms/log/icps1_ora_27382.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-16000: database open for read-only access
[code]...
Data Guard :: Configure Physical Standby(s) Across Two Boxes
Mar 29, 2011I am trying to configure physical standby(s) across two boxes. I am getting the errors
ORA-12154: TNS:could not resolve service name
ORA-16055: FAL request rejected
I am able to communicate between the two servers, tnsping both of them, sqlplus to each of the instances, but getting the TNS issue.
Tue Mar 29 13:21:55 2011
ARC0: Evaluating archive log 6 thread 1 sequence 73594
ARC0: Destination LOG_ARCHIVE_DEST_2 archival not expedited
ARC0: Beginning to archive log 6 thread 1 sequence 73594
Creating archive destination LOG_ARCHIVE_DEST_3: '/tmp_archive_dest/DLXMTY/arch_
DLXMTY_1_73594.dbf'
Creating archive destination LOG_ARCHIVE_DEST_1: '/archives/DLXMTY/arch_DLXMTY_1
_73594.dbf'
[code]....
Data Guard :: Physical Standby On Windows 2003?
Feb 6, 2013Is it possible to set a physical standby between 2 servers with same OS but different level ? I mean primary has windows 2003 SP1 and Standby has windows 2003 SP2. I want to know if it will work properly or not.
View 1 Replies View RelatedData Guard :: One Primary And 2 Physical Standby Databases
Sep 29, 2010I have one primary database and one physical standby database on my data guard environment.
Now i want one more physical standby database in my data guard environment, meaning i want 2 physical standby. since this is a production environment, i need to take great care. However, downtime will be mandatory.
[u]init.ora for production:[/u]
pup2.__db_cache_size=6241124352
pup2.__java_pool_size=33554432
pup2.__large_pool_size=134217728
pup2.__oracle_base='/oracle/app/oracle'#ORACLE_BASE set from environment
pup2.__pga_aggregate_target=5771362304
[code]......
init.ora for my first primary standby
pup2.__db_cache_size=6509559808
pup2.__java_pool_size=33554432
pup2.__large_pool_size=67108864
pup2.__oracle_base='/oracle/app/oracle'#ORACLE_BASE set from environment
pup2.__pga_aggregate_target=5502926848
[code].......
Data Guard :: How Does Grid Instantiate Physical Standby
Dec 6, 2011If I use Grid to create a physical standby, how does Grid copy the data to the standby server?
The live database is about 1Tb and the standby is at a different site. Does Grid compress this data at all? What mechanism does it use?
