can i create physical standby database to logical standby database.
my structure
============
primary database--->physical standby-->logical standby
for fail over case ==>physical standby convert to primary and logical standby connected to current primary database.
My steps for testing as below:
1.create a primary database
2.duplicate a physical standby database;
3.turn on flashback on both databases.
4.record SCN xxx on physical standby database.
5.convert physical standby to logical standby (using keep identity statement)
6.flashback to logical standby to xxx
7.convert logical standby to physical standby
8.using real time apply I got errors: Fast Parallel Media Recovery enabledManaged Standby Recovery starting Real Time ApplyMRP0:
Background Media Recovery waiting for new incarnation during transient logical upgrade procedure
Errors in file /home ora/ app/ oracle/ diag/ rdbms/ ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:ORA-19906: recovery target incarnation changed during recoveryManaged Standby Recovery not using Real Time ApplyErrors in file /home/ ora/app/ oracle/diag/ rdbms/ ora11gr1dg/ ora11gr1dg/ trace/ora11gr 1dg_mrp0_ 10120.trc:ORA-19906: recovery target incarnation changed during recovery
Errors appears every 10 seconds. Seems MPR0 is waiting for new incarnation for a long time. So am I.Standby database incarnation:
List of Database IncarnationsDB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time-------1 1 ORA11GR1 3853851354 CURRENT 1 08/09/2013 01:02:182 2 ORA11GR1 3853851354 ORPHAN 2127877 08/28/2013 19:22:01 BGV
I have a setup where i have one physical and logical standby from a primary database. In case of switch over between primary and physical database my logical apply gets stopped. Can a logical database be applied from a physical standby ?
View 2 Replies View RelatedI have a setup where i have one physical and logical standby from a primary database. In case of switch over between primary and physical database my logical apply gets stopped. Can a logical database be applied from a physical standby ?
View 5 Replies View Related,I have a test environment with Primary DB Server, Physical Standby and Logical Standby.The Logical Standby DB (cur_log_stdb) is backed up every evening by RMAN and I have a question:If I recover my Logical Standby DB from backup and switch replication to new Logical Standby DB (new_log_stdb) it will work or not?My steps e.g.:1. Make a new server for my new_log_stdb and repair structure of catalogs;2. Repair listener.ora and tnsnames.ora files from cur_log_stdb to new_log_stdb;3.
Restore DB with RMAN from backup to new_log_stdb;4. On cur_log_stdb execute "alter database stop logical standby apply";5. Change a DNS name from cur_log_stdb to new_log_stdb;6. On new_log_stdb execute "alter database start logical standby apply immediate";I'm not sure that archivelogs will apply to the new_log_stdb for period since rman backup was created. Configuration:Oracle Linux 6.4Oracle Database 11.2.0.3Primary and Physical with Data Guard
Can we convert a logical standby to physical standby? Yes or No, if yes how ..
View 7 Replies View RelatedI have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.
Tried the following methods.
1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.
2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
I working on a Production Environment, where our Database is running on a IBM-AIX platform.I need to implement Logical standby database for reporting purposes, in order to improve the performance.Now the transaction and the reporting is done at the same site itself.I want to know that, operating system and platform architecture (RAM size, no. of CPUs, ORACLE_HOME etc..) on the primary and standby systems must be same or can be different. complete configuration for Dataguard. My os version is,
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
I need to rename an Oracle9i database on windows which has a physical standby database running on a different machine.
I have the steps to rename the primary database but am unsure of it's impact on the physical standby database. It seems like I will have to re-create the physical standby database, since renaming the primary database involves opening the db with "resetlogs". It's a production environment hence can't play with it without knowing the results.
We're currently in a situation where the primary database server fs size does not match the standby database server fs size.
Standby database filesystem is almost 100% utilized, and we suggested to move some of the datafiles first to avoid threshold alerts and archive gaps.
Now, if we're gonna move datafiles on the physical standby, I believe the process would be stop managed redo apply -> shutdown standby -> OS move -> startup mount -> alter rename -> start managed redo apply. Is this correct? If not, how?
Also, would it have an effect if the controlfiles of primary and standby do not match because of the movement?
Suddenly I can't open any of my physical standby databases read only. Alert log snippet and trace files follow post. I'm running 9.2.0.1.0 on all hosts, which are running AIX 5.2. I've successfully opened all physical standby databases read only numerous times in the past. Is it possible that these standby databases cannot be switched over to primary should the need arise?
Here's how I typically open a physical standby database read only:
alter database recover managed standby database cancel;
alter database open read only;
Errors in file /ora/product/9.2.0.1.0/rdbms/log/icps1_ora_27382.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-16000: database open for read-only access
Error 604 happened during db open, shutting down database
USER: terminating instance due to error 604
[code]...
DB1 <Primary> - Production
DB2 <Physial Standby> - DR
I will need to startup my DB2 in DR segment for testing.If i perform the below, will it affect my Production DB? I need it to be up and running as well.
DR:
recover managed standby database cancel;
shutdown immediate;
startup nomount;
alter database mount standby database;
recover standby database until cancel;
alter database activate standby database;
Our client requirement is to avoid table data to physical standby database.
View 3 Replies View Related1) The Primary Database is UP. The Physical Stand By Database is DOWN. The Current Archive Log Sequence is 99 in Primary.
We have to apply Archive Log from 51 to 99 to the Standby Database. But Unfortunately, there is no backup of those Archivelogs and the ArchiveLogs from 51 to 98 have got deleted at Primary end.
Now how will you apply these Archive Logs from Primary Database to Physical Standby Database?
Note : The Physical StandBy Database is DOWN.
I have set up a single instance standbys for rac databases. Now, I need to offload the backups from the primary on to the standbys.
1. cancel managed recovery
2. connect to target(standby) and catalog and backup the standby
3. put standby in managed recovery mode.
I think following these steps, I can restore primary(?). Now, My question is, how can I use these standby backups to clone/refresh databases? I tried it by connecting to target(primary), catalog and auxiliary but rman is using the primary backups instead of standby's to refresh the auxiliary database.
I have Oracle database on Oracle 10g R2 with physical as well as logical standby database.
1) Is is necessary to take Physical standby database backup?
2) If 1) yes then Which RMAN backup is preferred?with catalog or default?How to take backup as different location?
3)how to Restore that backup?How to ensure backup is valid?
step by step procedure to configure physical standby database.....
i have to create on windows not in linux...so simple step by step procedure,once configured it should be up and running;
I am using data guard and a physical standby database.How to assign backups on physical standby database to reduce the load on Primary database.
environment: windows
Database version:11.2.0.1.0
What are the pro and cons on assigning RMAN backups jobs to physical standby database?
i'm a trainee for my PFE and i should to implement a physical standby database,i chosed this tuto URL.... but in step 10 when i do SELECT * FROM v$archive_dest where dest_id=2 ; i have i message error.
ORA-12154: TNS: could not resolve the connect identifier specified.
I would need to create a physical standby database for DR without using data guard. I like to know in more details like
1. What would be required to switch over to standby database in case of failure of primary database? Is it going to be a manual process each time, or can be automated using scripts?
2. How the archive logs will be applied to standby database in timely manner to sync with primary database?
3. How the Primary database will be synch with Standby database once the issue resolved on primary database.
4. Where do I get a complete script to create physical standby database on Windows platform?
I am trying to create the Physical StandBy Database in the same server. Till last 2 Final steps, everything went on well. In the final steps, when I try to open the StandBy Database, it throws the following Error:
*******************************************************
SQL...> alter database open;
alter database open
*
ERROR at line 1:
ORA-01154: database busy. Open, close, mount, and dismount not allowed now
I tried creating the Physical Standby with the following Steps.into that & tell me whether I have done any mistake.Also tell me any step I have missed from the following list of steps:
Environment: Oracle Release 10.2.0.1.0 / Windows 2003 Server Enterprise Edition SP2
Primary DB = 'PrimDB'
StandBy DB to be created = 'StBy1DB'
In the same Server, location for
PrimDB datafiles = 'F:\oracle\product\10.2.0\oradata\PrimDB\Data\',
StandBy Datafiles = 'E:\StandBy_DB\Data\'
[code]...
ERROR at line 1:
ORA-01154: database busy. Open, close, mount, and dismount not allowed now
why RMAN is unable to create physical standby database ?
RMAN> connect auxiliary sys/system@DGREPL
connected to auxiliary database: DGREPL (not mounted)
RMAN> connect target sys/system@REPL
connected to target database: REPL (DBID=2730563515)
RMAN> run{
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
[code]....
I am using Oracle RAC 11.2.0.3 as primary database, we are going to start using Oracle data guard. So I am designing my infrastructure and planing to use Oracle 11.2.0.3 Single instance as my physical stand by database.
My question is it feasible to have my standby database as single instance while the primary is RAC? is it feasible to build my Oracle single instance standby database from the RMAN backup of the RAC primary database? Is there any restrictions (or any points to be taken into consideration) since my primary database is RAC while the physical standby is Oracle single instance?
in the below link
[URL].......
it was mentioned that primary can be RAC or single and same for standby, but my question is it feasible to have primary as RAC while standby as single instance? or it should be like each others?
The primary database can be either a single-instance Oracle database or an Oracle Real Application Clusters (RAC) database. Similar to a primary database, a standby database can be either a single-instance Oracle database or an Oracle RAC database.
alter database commit to switchover to physical standby; i am getting ora-16416 switchover target is not synchronized with the primary what to do
View 3 Replies View RelatedSource DB is logical standby 10.2.0.5
Destination DB is 11.2.0.3
Is it possible to set up streams on the logical DB to replicate some schemas to the 11gR2 DB?
I am trying to create materialized views based on a few tables in a logical standby database.
The target database (11g R2) where the MVs will be created is a stand-alone database.
The DB where the base tables reside is a logical standby database (11g R2).
The requirement is to do a "FAST REFRESH" of the Materialized Views.
My questions are :
1. Can I create MV logs in the logical standby DB?
2. If the answer to question no. 1 is "Yes", do I need to do anything different or configure the logical standby DB in a specific manner in order to create MV logs. From what I understand, the objects in the logical standby database are in a locked state.
There are two servers.one in HP-UNIX and another is solaris.
I would like to configure a logical standby using oracle 9i...Is it possible in 9i?
Oracle 11.2.0.3.0
I have a primary database orcl and logical standby database orcl_std.
Real time apply is enabled. I have standby redologs in both primary and standby sides and I`ve started recovery with below command:
ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;
When I create a new table in primary database, I am unable to see it on standby database (Although real time apply is enabled) However, when I switch log in primary, I can see the new table in standby database.
My question is, why realtime apply is not working in my scenerio ? I was expecting to see the new table immediately in standby database once it is created in primary database. Why am I supposed to wait for log switch in real time apply ?
On next month i will have plan to delete history data on my Primary database, but i still want to keep them in logical standby as the data warehouse. So, how can i skip delete statement from primary database apply to logical standby.
Oracle SQL apply only support for Skip DML but not for keep delete statement
(on 10g and 11g)SQL>exec dbms_logstdby.skip(statement => 'DELETE',schema_name => 'SCOTT', object_name => 'DEPT');BEGIN dbms_logstdby.skip(statement => 'DELETE',schema_name => 'SCOTT', object_name => 'DEPT'); END; *ERROR at line 1:ORA-06550: line 1, column 7:PLS-00306: wrong number or types of arguments in call to 'SKIP'ORA-06550: line 1, column 7:PL/SQL: