I am trying to create materialized views based on a few tables in a logical standby database.
The target database (11g R2) where the MVs will be created is a stand-alone database.
The DB where the base tables reside is a logical standby database (11g R2).
The requirement is to do a "FAST REFRESH" of the Materialized Views.
My questions are :
1. Can I create MV logs in the logical standby DB?
2. If the answer to question no. 1 is "Yes", do I need to do anything different or configure the logical standby DB in a specific manner in order to create MV logs. From what I understand, the objects in the logical standby database are in a locked state.
1.create a primary database 2.duplicate a physical standby database; 3.turn on flashback on both databases. 4.record SCN xxx on physical standby database. 5.convert physical standby to logical standby (using keep identity statement) 6.flashback to logical standby to xxx 7.convert logical standby to physical standby 8.using real time apply I got errors: Fast Parallel Media Recovery enabledManaged Standby Recovery starting Real Time ApplyMRP0:
Background Media Recovery waiting for new incarnation during transient logical upgrade procedure
Errors in file /home ora/ app/ oracle/ diag/ rdbms/ ora11gr1dg/ora11gr1dg/trace/ora11gr1dg_mrp0_10120.trc:ORA-19906: recovery target incarnation changed during recoveryManaged Standby Recovery not using Real Time ApplyErrors in file /home/ ora/app/ oracle/diag/ rdbms/ ora11gr1dg/ ora11gr1dg/ trace/ora11gr 1dg_mrp0_ 10120.trc:ORA-19906: recovery target incarnation changed during recovery
Errors appears every 10 seconds. Seems MPR0 is waiting for new incarnation for a long time. So am I.Standby database incarnation:
List of Database IncarnationsDB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time-------1 1 ORA11GR1 3853851354 CURRENT 1 08/09/2013 01:02:182 2 ORA11GR1 3853851354 ORPHAN 2127877 08/28/2013 19:22:01 BGV
I have a setup where i have one physical and logical standby from a primary database. In case of switch over between primary and physical database my logical apply gets stopped. Can a logical database be applied from a physical standby ?
I have a primary database orcl and logical standby database orcl_std.
Real time apply is enabled. I have standby redologs in both primary and standby sides and I`ve started recovery with below command:
ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;
When I create a new table in primary database, I am unable to see it on standby database (Although real time apply is enabled) However, when I switch log in primary, I can see the new table in standby database.
My question is, why realtime apply is not working in my scenerio ? I was expecting to see the new table immediately in standby database once it is created in primary database. Why am I supposed to wait for log switch in real time apply ?
,I have a test environment with Primary DB Server, Physical Standby and Logical Standby.The Logical Standby DB (cur_log_stdb) is backed up every evening by RMAN and I have a question:If I recover my Logical Standby DB from backup and switch replication to new Logical Standby DB (new_log_stdb) it will work or not?My steps e.g.:1. Make a new server for my new_log_stdb and repair structure of catalogs;2. Repair listener.ora and tnsnames.ora files from cur_log_stdb to new_log_stdb;3.
Restore DB with RMAN from backup to new_log_stdb;4. On cur_log_stdb execute "alter database stop logical standby apply";5. Change a DNS name from cur_log_stdb to new_log_stdb;6. On new_log_stdb execute "alter database start logical standby apply immediate";I'm not sure that archivelogs will apply to the new_log_stdb for period since rman backup was created. Configuration:Oracle Linux 6.4Oracle Database 11.2.0.3Primary and Physical with Data Guard
On next month i will have plan to delete history data on my Primary database, but i still want to keep them in logical standby as the data warehouse. So, how can i skip delete statement from primary database apply to logical standby.
Oracle SQL apply only support for Skip DML but not for keep delete statement
(on 10g and 11g)SQL>exec dbms_logstdby.skip(statement => 'DELETE',schema_name => 'SCOTT', object_name => 'DEPT');BEGIN dbms_logstdby.skip(statement => 'DELETE',schema_name => 'SCOTT', object_name => 'DEPT'); END; *ERROR at line 1:ORA-06550: line 1, column 7:PLS-00306: wrong number or types of arguments in call to 'SKIP'ORA-06550: line 1, column 7:PL/SQL:
Can i create logical_stand_by for windows server 2008, the primary data base is HP UX , both operating systems are 64 bits and data bases are Oracle 10g 10.2.0.1.0.
I am not able to find any document that shows steps to create a SINGLE INSTANCE LOGICAL STANDBY database for a 2 NODE ORACLE RAC database. I have found documents for RAC to Single Instance Physical standby database. But not for Logical Standby.
Details:
OS: Redhat 5 DB: 10.2.0.4(shared file system, not using ASM/Standby also file system) Status: Single instance physical standby database created, need to convert it to Logical standby.
I have a setup where i have one physical and logical standby from a primary database. In case of switch over between primary and physical database my logical apply gets stopped. Can a logical database be applied from a physical standby ?
I working on a Production Environment, where our Database is running on a IBM-AIX platform.I need to implement Logical standby database for reporting purposes, in order to improve the performance.Now the transaction and the reporting is done at the same site itself.I want to know that, operating system and platform architecture (RAM size, no. of CPUs, ORACLE_HOME etc..) on the primary and standby systems must be same or can be different. complete configuration for Dataguard. My os version is,
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit PL/SQL Release 10.2.0.4.0 - Production CORE 10.2.0.4.0 Production TNS for IBM/AIX RISC System/6000: Version 10.2.0.4.0 - Production NLSRTL Version 10.2.0.4.0 - Production
I have One Production and one logical standby database . Due to tape problem we are unable to take backups of primary . And due to business , we cannot take back up on disk in hot period(Bank database ) .
If i take logical standby database backup(level 0 ) using RMAN , then will i be able to restore it on production dtbs (In case Production down) ? . Logical standby is in sync with primary .
I have two Oracle 10.2.0.4 databases, on two SUN M5000 (Solaris 5.10). One is primary (EXP1), the other is the standby (EXPBKP). Both SID is 'EXP'. If I do a manual recover (after I sync'ed primary archive logs from primary to standby), it works. If I do a manual log switch, logs are shipped AND applied on the standby. But after a while, I can see some errors on primary alert log , and logs are not shipped anymore :
CODE Errors in file /applications/oracle/admin/EXP/bdump/exp_arc2_1277.trc: ORA-03135: connection lost contact Tue Oct 26 08:30:14 2010 FAL[server, ARC3]: FAL archive failed, see trace file. Tue Oct 26 08:30:14 2010 Errors in file /applications/oracle/admin/EXP/bdump/exp_arc3_1279.trc: ORA-16055: FAL request rejected ARCH: FAL archive failed. Archiver continuing [code]....
I've a primary database and a physical standby.Logs are shipping perfectly from primary to standby.The logs that are applied on the standby are getting stored in a mount point(LINUX-/opt2) which consumes more space(160 GB). Will that be right if I go ahead and delete them?
My rman configurations in primary is:
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 4; CONFIGURE BACKUP OPTIMIZATION OFF; # default CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default CONFIGURE CONTROLFILE AUTOBACKUP ON;
I got a database on dataguard and my primary (db1) is shipping files to my standby (db2) with no problems.However, when I query:
select sequence#, status, applied from v$archived_log;
I see this: SEQUENCE# S APP ---------- - --- 4 A YES 5 A YES 6 A YES 7 A YES 8 A YES 9 A YES 10 A YES 11 A YES 12 A YES 13 A YES 14 A YES [code]....
So I did an alter system switch logfile on db1 then looked again and I can see new archived logs being applied.I thought all archived logs had to be applied on the standby since this is the very foundation of the standby database.Am I going to run in trouble later if I have a failover (unsynchronized database)
I have created a physical standby database and in it the logs are not getting applied.following is an extract of the standby alert log
Wed Sep 05 07:53:59 2012 Media Recovery Log /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc Error opening /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc Attempting refetch Media Recovery Waiting for thread 1 sequence 37638 Fetching gap sequence in thread 1, gap sequence 37638-37643 Wed Sep 05 07:53:59 2012 RFS[46]: Assigned to RFS process 3081 RFS[46]: Allowing overwrite of partial archivelog for thread 1 sequence 37638 RFS[46]: Opened log for thread 1 sequence *37638* dbid 1723205832 branch 765704228 Wed Sep 05 07:55:34 2012 RFS[42]: Possible network disconnect with primary database
However, the archived files are getting copied to the standby server.I tried registering and recovering the logs but it also failed..Follows some of the information,
Primary Oralce 11R2 EE SQL> select max(sequence#) from v$log where archived='YES'; MAX(SEQUENCE#) -------------- 37668 [code]...
I trying to backup archive logs using rman in standby database. I'm able to backup archive logs using simple command it get's successfully completed. rman > BACKUP ARCHIVELOG ALL When i'm trying to do with keep command it's getting failed.I'm trying to do on physical standby databaseBACKUP ARCHIVELOG ALL KEEP UNTIL TIME 'SYSDATE+100' TAG = 'TEST'.
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply 2)Apply patches on logical standby database 3)let the name server point to the backup site 4)Apply patches on the primary database 5)Start SQL apply 6)Let the name server point back to the production site
We have 2 node (n1 nad n2 ) RAC and 3rd node (n3) with Dataguard logical database for reporting ..
1. logical database (n3) not syn with primary (n1,n2) 2. During repair above mentioned problem by mistake my logical(n3) also become primary 3. now how I will again change my n3 to logical 4. I got following error
RE: ORA-16009: remote archive log destination must be a STANDBY database
I am trying to create a physical standby database using the add standby database option within OEM 10g. This is something we have done numerous times before on 10g and 11g db's without a single issue, but for some reason, this time after selecting my RMAN backup location and staging area location , I am getting the following error when I click Next:
RMAN Backup Location - The specified RMAN backup is invalid. Could not identify controlfile from the backup
It is the latest backup (using RMAN catalog) from the previous evening and includes datafiles and control file.
Here is the output for List backup:
BS Key Size Device Type Elapsed Time Completion Time ------- ---------- ----------- ------------ --------------- 1741586 7.70G DISK 00:03:26 06-DEC-12 BP Key: 1741590 Status: AVAILABLE Compressed: NO Tag: TAG20121206T220033 Piece Name: /carebackup/oradata/CARELIVE/carelive/backup/df_CARELIVE_4811_1.bus
[code].....
The only difference between creating a standby for this db and others we have created is that the file system the backups are stored on is on a non-global zone shared via nfs mount.
I know that when I try and share that filesystem with other servers I get the message: share_nfs: Cannot share filesystems in non-global zones If the /backup filesystem is not shared with any other servers would OEM be able to read from that NGZ? The filesystem is available to connect to using ssh from other locations, but not sure how OEM handles this part of the process.
I am trying to create the Physical StandBy Database in the same server. Till last 2 Final steps, everything went on well. In the final steps, when I try to open the StandBy Database, it throws the following Error:
******************************************************* SQL...> alter database open; alter database open * ERROR at line 1: ORA-01154: database busy. Open, close, mount, and dismount not allowed now
I tried creating the Physical Standby with the following Steps.into that & tell me whether I have done any mistake.Also tell me any step I have missed from the following list of steps:
Environment: Oracle Release 10.2.0.1.0 / Windows 2003 Server Enterprise Edition SP2 Primary DB = 'PrimDB' StandBy DB to be created = 'StBy1DB'
In the same Server, location for PrimDB datafiles = 'F:\oracle\product\10.2.0\oradata\PrimDB\Data\', StandBy Datafiles = 'E:\StandBy_DB\Data\'
[code]...
ERROR at line 1: ORA-01154: database busy. Open, close, mount, and dismount not allowed now
creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0) Operating System:Linux 5 Error: RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52 RMAN-03015: error occurred in stored script Memory Script RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor [code]....
provide any work arounds to proceed further in creating the standby database.
I am currently running my production database server on win 2003 with oracle9i, I want to create a physical standby server, so I had created new server with same configuration. Need command to apply these datafiles and archives which are generating everyday in my primary database server.
I have dataguard configuration operating in maximum availability mode with a local standby db (A - lgwr sync not using real time apply) and a remote standby db (B - lgwr async). I then simualted a crash of my primary database with batch jobs running. Since the stby db A is in lgwr sync option ,all the commited data in the current online redo log has been transmitted to stby A and is present in its stby redo log (Group 2).How do I apply this stby redo log to the remote stby db.
Tried the following methods.
1.ftp the stby redo log to the remote db and tried to regiter it, got an error that it is not completely archived.
2.issued the recover standby database command and supplied the stby redo log when it asked for the sequence in the stby redo, got an error saying there is corruption in a block(tried this option multiple times ended up with the same result.)
GROUP# THREAD# SEQUENCE# sizeMB ARC STATUS T ---------- ---------- ---------- ---------- --- ---------------- - 1 1 115 512 YES CLEARING O 2 1 116 512 YES CURRENT O 6 1 114 512 YES CLEARING O 4 1 112 512 YES CLEARING O 5 1 113 512 YES CLEARING O 3 1 111 512 YES CLEARING O
6 rows selected. [code]...
Above result is from standby database.I am trying to understand the concept of standby redo log.My stadby database protection_mode is MAXIMUM PERFORMANCE.
