Application Express :: How To Manage Positions Of Different Display Points Of Theme
Apr 6, 2013
I'm developing, or trying, on Apex 4.2...The issue is about themes and how to manage the positions of diferents Display Points of a theme.
Everybody know that any theme have a map where its position all differents parts of this map (Body1, Body2, Body3, position01, position02 and so). So when you choice any theme, it come with all this Display points defined. You can see this map rendering any region page and in the item Display Point you can see this map clicking on the light.
There is anyway to can manage this map and change position or behavior of those points?. For example , I'm interested that under the tabs, to have at the same height, 3 diferentes position, one at left, one at center and other at right.
I have a number of pages that use the page template "*One Level Tabs - Content Frame*".End users that use Internet Explorer (versions 8 and 9), when they first visit the application their browser displays it in Compatibility View.They cannot see the side bar on the right-hand side, meaning that often they cannot see a lot of necessary buttons and info!
Their page displays as below: URL....
I am not sure it is possible, nor good practice, to force the app to display in non-compatibility mode.Is there a way to enhance their experience? Or another workaround?
At the moment I am waiting until they log an issue and then informing them to turn compatibility view off, or to use Chrome or Firefox. I'd like to make it better from my end!
Is there a way to change the Application Builder theme? There are themes for applications; how about for the builder itself? I looked but did not see a selection for this.
I'm a Geek thru and thru, I guess, but I think you might have to be xxxx retentive to like all these square boxes. And these old eyes have to squint to focus among the vast sea of gray shades.
I am about to start on a new application where I intend to include some major custom css formatting.
Now with previous applications and themes I have experienced, that some elements are very hard to adjust (like placing a table in the center of the screen instead on the left edge), also when importing other libraries like Twitter Bootstrap, often there are conflicts between the styles, that cause unpleasant results.
Now my question to you is, which theme in the 4.0-respository has a rather new page-html, and is best suited for further customization? E.g. when importing jquery UI.
I know, I still could kick out the theme-css out of the page template entirely, but then some functionalities, like the actions menu on an interactive report, stop functioning.
I have been given the task to modify our company's Apex from 4.1 to 4.2. The upgrade has been completed; in addition, the current UI, blue and tan has been updated to BlueJay. I have noticed the structure of the page gets shuffled as well as contents within modules. What would be the best way to "re-organize" my pages.
- Would it be easy for me modify the page, if so how do I do this. The settings look identical, so what would I change ? - Do I recreate the entire page from scratch ?
In my app, I am using theme 25 for desktop and theme 50 for jquery smartphone (iPhone in my testing). I am using APEX 4.2.2.00.11. I thought that I could copy a few of the pages using theme 25 and as part of the copy process select theme 50 to create a page suitable for a smartphone.
I tried this for a few pages. The problem is when I attempt to bring up the new pages that are using theme 50 on the iphone, they just show a spinning circle. I've tried with a page that uses a calendar region, another that uses a report region (not IR), and one that uses a form region.
I would like to reuse the icon button template for my button in a tabular form.
I tried to add <button type="button" class="uButton iconButton search"> Click </button> in column link text. I display this column like a Standard Report Column. The result it's not good.
How I can have the icon and button template like in my others buttons ?
I upgraded my APEX instance from 4.1 to 4.2 and now I can't go to (INTERNAL) Manage Instance->Instance Settings I see only ORA-28817: PL/SQL function returned an error.
I did an application and i used "Bluejay Theme" and found out that the buttons are distorted when viewing in Google Chrome. Strangely it doesn't happened when viewing in IE or Firefox.
- Convert 2nd Level Tabs of (Bluejay-22 Theme) to be Drop-Down Menus as in (Application Builder Theme)
- Where can I find documentation for app_AppMenuMultiOpenBottom3
Current Situation
- Only the first level tabs are converted to match the (Application Builder Theme).
- The Drop-Down menus of the second level tabs are not working
Steps tried
1) link the following CSS's into the Header section of the Page Template of (Bluejay-22) <link rel="stylesheet" href="/i/css/apex_builder.min.css?v=4.2.0.00.27" type="text/css" /> <link rel="stylesheet" href="/i/css/apex_ui.min.css?v=4.2.0.00.27" type="text/css" /> <link rel="stylesheet" href="/i/css/apex_ui_builder_home.css" type="text/css" />2) link the following Scripts into the Header section of the Page Template <script type="text/javascript">
I would like to change the printing settings in my workspace Instance settings. But, I can't find the "Manage Instance" option mentioned in the tutorials.
In my application, I have SSO authentication. However, I also want to restrict access to certain pages (tabs). What would be the best approach for this? Secondly, How can we hide/display tabs in the application?
I am using Apex 4.1 and I have a select list in my page. I know i can access the value of the selected item by :P1_SelectList, but I would like to know how to access the display value of the selected item.
I have a requirement to view the PDF content in the apex page region, I am using Apex 3.2 and Oracle 10 Enterprise edition. I Uploaded the PDF file in the shared component under static file. Now i need to view the content of the PDF file. method to view the PDF content.
I saw the link in denes blog here he shows how the PDF is getting displayed. but there is no steps of methods mentioned
I am using APEX 4.0, my regions need to be displayed at "Display Point: Display Template Body 2" in column 2.I have 2 regions I want displayed horizontally, side by side.I want to use a parent region to contain them. I create my parent region, called it A, template = Reports, assign it to sequence = 10.I create my 2 sub region (B) and (C), sequence 20 and 30, template = Navigation, picking parent = A.By default, B displays above C. URL....
I copied the Navigation template, creating a new one called NAV2 and added this in the sub-region template section:(this cut/paste) doesnt display well here: it is the exact DIV begin/end block as posted above.
div style="float: left;" #SUB_REGION# div
I changed regions (B) and (C) to use template = NAV2, without any change in display behavior.I read further in the above post where it was recommended to reset the clear property, so I changed the above style like to: style="float: left;clear:none;".
I am developing an apex application using the apex cloud (apex.oraclecorp.com). I am using the DB link to show the data on APEX UI. I have a blob data which is stored in the remote DB, and I want to display the BLOB data as text on a popup or a new page or a download link. I tried using display only item but APEX throws an error saying that remote DB is not supported. Also, It would be great if I can just show a download link on the UI for the BLOB data, again when I try to select the format as BLOB in the column attributes, When I give the table@dblink as BLOB table I get an error saying that "table@DBLINK not found". Is there any way to display the BLOB data as text or download it which is present in my local DB?
i am using List Manager Item .i have use List of values (lov)
SELECT LD.LOOKUP_NAME d ,LD.ID r FROM CRM_LOOKUP_MAS LM, CRM_LOOKUP_DTL LD WHERE LM.LOOKUP_ID=LD.LOOKUP_ID AND LM.LOOKUP_TYPE='TRAVEL RHYTHM' and LD.ACTIVE_FLAG='Y' order by LD.LOOKUP_NAME }
when i click to add new value and click then pop up window open with LD.LOOKUP_NAME display value but when i click on add Button then value added in to below box with LD.ID
i want to display here my LD.LOOKUP_NAME value into below box.
I would like to display the row number in the report region at the beginning of each row for each page (based on the number of rows to display per page).
So if the number of rows per page is 15, I would want to show each row from 1 to 15. When going to the next page (16 - 31) I would like to show row 1 to 15 again next to each row. And if the number of rows per page is 20, I want to see row numbers 1 to 20 on each page.
Since I believe an Update button only processes the current page, I would like to then use this row numbers (1 - 15) to get the values of the displayed column for each row to perform an insert to another table.
I have created two page process with two buttons "APPROVE" AND "CANCEL" button. first page process running approve invoice procedure on approve button and second page process running cancel invoice procedure on cancel button. i want to display massage before approve invoice and cancel invoice (DO you want to approve invoice) on approve button and (Do you want to cancel invoice on ) cancel button.
I've got an interactive report with detail and icon view enabled. How do I get the current display state (user looks at report, detail or icon view) out of the apex dictionary ?Is there any place in APEX_APPLICATION_PAGE_IR_... where I can find it ? I'm on APEX 4.0.2. Upgrade to APEX 4.2.2 is planned this fall.
I implemented the re Captcha plugin and it works ok. What I want to do is, on the same page where the captcha is displayed, to have a report region that is displayed conditionally based on the captcha result.
More specifically, the page has two items for user input (the captcha and a text item) and a Submit button. If the captcha is successful, then the text item will be submitted and the region displayed. The problem I'm running into is that the text item is always submitted regardless of the captcha.
I have just started using Oracle Application Express 11g. On my new attempt I am able to develop a table, report and a form, but I am not able to display picture image on the form though the browse link is active.
I can load the file name from the location folder to the form but it does not display. When I click on APPLY CHANGE then everything disappears. My main problem is how to successfully configure the settings for image display.
I have a table which contain 3 columns, see below:
id primary key pic1 blob pic2 blog
there is 1 row in it(id=1), just for display 2 images.
Uploaded 2 images into above Blob fields by file browse function. Now, I want to show the 2 pictures in a Region by using display image item P1_AR, but it didn't work.
Based on: BLOB Columns specified in item source Alternative Text Column: null Filename Column: null BLOB last update Column: nullSource used: Only when current value in session state is null Source type: SQL Query(return single value) Source value or express: select dbms_lob.getlength(PIC) from cp_pic where id=1
I got the error below after runing: ORA-20999: P1_AR has to have a valid BLOB column as source
I have Select list itemS based on Lookup tables. When the form in Edit mode, I want to prevent the end user from changing the value of these Select list items. How can I accomplish this ??? **If I change the type of the item to Display only, then it will show the returned value of the Select list.
I have a form on a table which has a column indicating if the row is editable or not. When the form is displaying an existing row, the user would like the display attribute of all fields to be set to Display Only when the column indicates the row is not editable - otherwise the attributes should be set to Text, Number, Date, etc.
