Application Express :: Display Horizontal Sub Regions
Mar 4, 2013
I am using APEX 4.0, my regions need to be displayed at "Display Point: Display Template Body 2" in column 2.I have 2 regions I want displayed horizontally, side by side.I want to use a parent region to contain them. I create my parent region, called it A, template = Reports, assign it to sequence = 10.I create my 2 sub region (B) and (C), sequence 20 and 30, template = Navigation, picking parent = A.By default, B displays above C. URL....
I copied the Navigation template, creating a new one called NAV2 and added this in the sub-region template section:(this cut/paste) doesnt display well here: it is the exact DIV begin/end block as posted above.
div style="float: left;"
#SUB_REGION#
div
I changed regions (B) and (C) to use template = NAV2, without any change in display behavior.I read further in the above post where it was recommended to reset the clear property, so I changed the above style like to: style="float: left;clear:none;".
I have created a Search Sub region within a reports region. But the sub region is created at the bottom of the reports and I am unable to move it to the top. I want it to be displayed on top of the report but within the reports region.
I have an application that it will have over 200 pages. Each page will have a sidebar region with a number of lists, around 8-10 items. The lists references all pages in the app. Then, if I create a new menu list , I have to include this new list in all pages, it's painful. It's posible to have shared regions between pages like the shortcuts for messages in the user interface elements?
In this way, I will create an unique element including all lists that will be shared through all pages. This will greatly facilitate the work!I'm using Apex 4.1.
I created list of values like Bar chart,Column Chart,Pie Chart.these list of values added to the text field named as Chat type. In same region i created 3 chart sub regions. My requirement is if i select chart type-pie chart.the page will show only pie chart region only.Same to Bar chart and Column charts also.
In Oracle Apex 5 SOD it says it will have the following feature:
"New Multi-Row Edit Region Type – Define a new region type with a modern UI for updating multiple rows of data and allow multiple regions on one page"
[URL].......
If so, how likely it will allow dynamic query (PL/SQL) in addition to simple query? Also, how likely it will include advanced features like frozen columns with group headers, subgrid, etc.? It will be nice if the grid will adjust itself based on the width of the screen.
I have created two regions in one page. I created some items but would like to share the items for both regions. When you create the item, you have to select which region it belongs to. Those items are supposed to be used by both regions, so I wonder if it is possible to share the items instead of creating the same items for region 2. I know I can create application item, but how to share items among different regions in the same page.
I have a page which, upon page load, some regions should be hidden. I've created a dynamic action which hides a couple regions (on page load), however I can see the regions for a moment as the page is loading, then disappear. Is there a way to ensure the regions are hidden when the page is rendered?
I've also tried using javascript, but I have the same issue (the regions are visible for a moment, then disappear).
I am using apex 4.0.2.00.07. I have a page with two regions. The first region has only one row and I have no problems accessing it and inserting those values into the table this is what I used to access one column from that one row APEX_APPLICATION.G_F03(1)
The second region is an interactive report, to which I have managed to add a checkbox and a textbox.
1)So if a checkbox has been checked off the row should be inserted 2) if the textbox has been entered it should replaceone of the values.
My question is how to access the second region? I started a loop based on the rows in the collection but that is as far as I got.
FOR idx IN 1..l_collectionTable_name loop end loop
I have 20 item fields in same form. i need to align them in sequential manner. For example x y z abcl m o p q r s xyzabclmopqrs are the items to achieve this what i have to do...
I have a page with about 8 Classic reports. 4 of them percentage values, 4 totals. I have one RG with a Percentage or total option. When I select the percentage radio, it should hide all the total regions. When I select the totals radio it should hide all the percentage regions. Simple? So I thought. This is what I did.
1. Created a RG(P2_RG) -> Page value is redirect and set value.
2. STATIC:Percentage;P,Total;T
In the RG, I have created a normal DA which has the true and false events as follows.
Event -> Change Items -> P2_RG equal to -> P
In the true actions, I have hidden the 4 totals regions. shown the 4 Percent regions. In the false action, I have shown hidden the 4 percent region shown the 4 totals region.
The event specification for one these true actions is
Action -> Hide (If I am hiding) Fire when event is ->True Selection type -> region Region -> The region I want to hide/show.
But it does not work! I tried to replicate the issue on apex, by using a small example but could not. Works fine in apex following the same process.
[URL]
I tried to debug by having a display item to show the value when I change the radio button. The values are changing properly. I tried actually, adding a condition filter in the region itself by using the "Value of item/column in expression1 = expression 2" where expression one I tried :P2_RG and expression 2 as P but that just hides the whole region.
I had a few regions on my page, the 2nd did not start a new row so it appeared horizontally where possible.During some experimentation, I created a new region with a sequence in between that started new row, but even when that region was conditionally never, my original 2nd region started on new row.
Original: Region 1 - Region 2(empty) - Region 3 (new row/col no)> New region added: Region 1Region 1.5 (added, new row) Region 2 Region 3> Region 1.5 not shown: Region 1Region 2 Region 3>
Let me know if you would like a test case for better visualisation.
I've edited the XML on the Chart Attributes page but I don't find atrtributes to rotate the y-axis title (<text>TITLE</text>) nor the letters themselves in the title. What I'd like is something very close to
T I T L E
But what I get is a horizontal title rotated -90 degrees. I've looked at lots of Anychart documentation but don't find anything that seems to fit with the XML already given on the Chart Attributes page. I've seen the "rotate" attribute but I don't know where it would go and even then, I'm sure it only rotates the title as a unit and not the individual letters.
Any problem using 4.2's One Level Tabs - Content Frame page where you have a parent region (of type content frame Body Container ) while number of child regions (of type Hide & Show Region - Borderless ), if you want to re-order them by changing the sequence, it has no effect when you run the page.
The regions still show in the same order top to bottom as it did before the update of sequences. Heading links (to show/hide child regons in content frames) has the same ordering as before.
In my application, I have SSO authentication. However, I also want to restrict access to certain pages (tabs). What would be the best approach for this? Secondly, How can we hide/display tabs in the application?
I am using Apex 4.1 and I have a select list in my page. I know i can access the value of the selected item by :P1_SelectList, but I would like to know how to access the display value of the selected item.
I have a requirement to view the PDF content in the apex page region, I am using Apex 3.2 and Oracle 10 Enterprise edition. I Uploaded the PDF file in the shared component under static file. Now i need to view the content of the PDF file. method to view the PDF content.
I saw the link in denes blog here he shows how the PDF is getting displayed. but there is no steps of methods mentioned
I am developing an apex application using the apex cloud (apex.oraclecorp.com). I am using the DB link to show the data on APEX UI. I have a blob data which is stored in the remote DB, and I want to display the BLOB data as text on a popup or a new page or a download link. I tried using display only item but APEX throws an error saying that remote DB is not supported. Also, It would be great if I can just show a download link on the UI for the BLOB data, again when I try to select the format as BLOB in the column attributes, When I give the table@dblink as BLOB table I get an error saying that "table@DBLINK not found". Is there any way to display the BLOB data as text or download it which is present in my local DB?
i am using List Manager Item .i have use List of values (lov)
SELECT LD.LOOKUP_NAME d ,LD.ID r FROM CRM_LOOKUP_MAS LM, CRM_LOOKUP_DTL LD WHERE LM.LOOKUP_ID=LD.LOOKUP_ID AND LM.LOOKUP_TYPE='TRAVEL RHYTHM' and LD.ACTIVE_FLAG='Y' order by LD.LOOKUP_NAME }
when i click to add new value and click then pop up window open with LD.LOOKUP_NAME display value but when i click on add Button then value added in to below box with LD.ID
i want to display here my LD.LOOKUP_NAME value into below box.
I want to do horizontal fragmentation of a table say employee. But fragmentation is often related to distributed databases. So i want to ask how can i do this on my single home computer? list out the steps that should be performed. I saw the concept of link but really failed to understand that.
I would like to display the row number in the report region at the beginning of each row for each page (based on the number of rows to display per page).
So if the number of rows per page is 15, I would want to show each row from 1 to 15. When going to the next page (16 - 31) I would like to show row 1 to 15 again next to each row. And if the number of rows per page is 20, I want to see row numbers 1 to 20 on each page.
Since I believe an Update button only processes the current page, I would like to then use this row numbers (1 - 15) to get the values of the displayed column for each row to perform an insert to another table.
I have created two page process with two buttons "APPROVE" AND "CANCEL" button. first page process running approve invoice procedure on approve button and second page process running cancel invoice procedure on cancel button. i want to display massage before approve invoice and cancel invoice (DO you want to approve invoice) on approve button and (Do you want to cancel invoice on ) cancel button.
I've got an interactive report with detail and icon view enabled. How do I get the current display state (user looks at report, detail or icon view) out of the apex dictionary ?Is there any place in APEX_APPLICATION_PAGE_IR_... where I can find it ? I'm on APEX 4.0.2. Upgrade to APEX 4.2.2 is planned this fall.
I implemented the re Captcha plugin and it works ok. What I want to do is, on the same page where the captcha is displayed, to have a report region that is displayed conditionally based on the captcha result.
More specifically, the page has two items for user input (the captcha and a text item) and a Submit button. If the captcha is successful, then the text item will be submitted and the region displayed. The problem I'm running into is that the text item is always submitted regardless of the captcha.
