I have a page which, upon page load, some regions should be hidden. I've created a dynamic action which hides a couple regions (on page load), however I can see the regions for a moment as the page is loading, then disappear. Is there a way to ensure the regions are hidden when the page is rendered?
I've also tried using javascript, but I have the same issue (the regions are visible for a moment, then disappear).
APEX 4.1 / 11g
Theme 21
I have a page with about 8 Classic reports. 4 of them percentage values, 4 totals. I have one RG with a Percentage or total option. When I select the percentage radio, it should hide all the total regions. When I select the totals radio it should hide all the percentage regions. Simple? So I thought. This is what I did.
1. Created a RG(P2_RG) -> Page value is redirect and set value.
2. STATIC:Percentage;P,Total;T
In the RG, I have created a normal DA which has the true and false events as follows.
Event -> Change
Items -> P2_RG
equal to -> P
In the true actions, I have hidden the 4 totals regions.
shown the 4 Percent regions.
In the false action, I have shown
hidden the 4 percent region
shown the 4 totals region.
The event specification for one these true actions is
Action -> Hide (If I am hiding)
Fire when event is ->True
Selection type -> region
Region -> The region I want to hide/show.
But it does not work! I tried to replicate the issue on apex, by using a small example but could not. Works fine in apex following the same process.
[URL]
I tried to debug by having a display item to show the value when I change the radio button. The values are changing properly. I tried actually, adding a condition filter in the region itself by using the "Value of item/column in expression1 = expression 2" where expression one I tried :P2_RG and expression 2 as P but that just hides the whole region.
I have created two regions in one page. I created some items but would like to share the items for both regions. When you create the item, you have to select which region it belongs to. Those items are supposed to be used by both regions, so I wonder if it is possible to share the items instead of creating the same items for region 2. I know I can create application item, but how to share items among different regions in the same page.
View 6 Replies View RelatedI am using apex 4.0.2.00.07. I have a page with two regions. The first region has only one row and I have no problems accessing it and inserting those values into the table this is what I used to access one column from that one row APEX_APPLICATION.G_F03(1)
The second region is an interactive report, to which I have managed to add a checkbox and a textbox.
1)So if a checkbox has been checked off the row should be inserted
2) if the textbox has been entered it should replaceone of the values.
My question is how to access the second region? I started a loop based on the rows in the collection but that is as far as I got.
FOR idx IN 1..l_collectionTable_name
loop
end loop
I have 20 item fields in same form. i need to align them in sequential manner. For example x y z abcl m o p q r s xyzabclmopqrs are the items to achieve this what i have to do...
View 2 Replies View Relatedi m using apex 4.1, and want to submit page when page load. i tried dynamic action but it continuously refreshing page. is there any other javascript or anything else from which i submit page on load
dynamic action used, event on load and action submit page but it continuously submitting page.
I want to show progress bar every time when page loads.
Progress bar is coming on the page. but it is not going off after page is loaded.Below is the code which i added for the Progress bar.
//written on Header Text of Page
<script type="text/javascript">
<!--
function html_Submit_Progress(pThis){
$x_Show('AjaxLoading');
window.setTimeout('$s("AjaxLoading",$x("AjaxLoading").innerHTML)', 100);
}
[code]...
I want only to show only page loads.
Apex Version : Apex 4.1
DB Version : 10g
Should the page load D.A. fire not until the dom is ready? Or is this not necessarily the case.I'm running a page over a slow connection, so the event (true action: execute JS) is being executed before the page is ready to handle the code. I would think this event should not run until the DOM is ready.
I have confirmed this by wrapping the code in document.ready, and it behaves as expected.
Basically I have a report that as part of it's source sql takes in an element from a select list.
E.G. SELECT * FROM table_name WHERE table_column = : P1_SELECTLIST
This works fine when the user selects an option from the select list however the first time the page runs it always returns data not found. The options correctly appear in the select list as they should without any nulls although it seems the select list is still initializing as null. I have been told to try and add a computation before the header on the select list item, although I'm not sure if this would work/how to do this.?
I have a table that reads something like this
City Route
NewYork 2
NewYork 4
NewYork 5
London A
London B
Paris X1
I want to assign Routes (concatenated) to an item on page load... as an example for NewYork it should read like this
P2_ROUTE = 2, 4, 5
I am looking to do the above using query, something like this
select (concatenated route)
from Table_A
where
City = :P2_City
how to concatenate variables.?
My collection is not working as expected, what could be the issue here. This is what i did,
1. I created a collection in a process to fire on page load
if apex_collection.collection_exists(p_collection_name=>'MMMM') then
apex_collection.delete_collection(p_collection_name=>'MMMM');
end if;
APEX_COLLECTION.CREATE_OR_TRUNCATE_COLLECTION(p_collection_name => 'MMMM');
2. On my page i have a text field P1_text1 when i enter value into text field like ="sample data" i want this data loaded into my collection, so i created a button and added a process(on submit - before computations...) so it should insert into the collection when i click the button but no data is loaded, process:
APEX_COLLECTION.ADD_MEMBER(
p_collection_name => 'MMMM',
p_c001 => :P1_TEXT1,
p_c002 => 'TESTDATA' );
3. when i run the below query it shows "no data found" ,
SELECT c001,c002
FROM APEX_COLLECTIONS
WHERE collection_name = 'MMMM';
how to combine APEX 4.2 with jquery mobile componentsOn one page with a hole bunch of components there is also a popup-div<div id="myPopup" data-role="popup">
<!-- close button, safe button, input field and short list... -->
</div>It gets opened with js: $( "#myPopup" ).popup( "open" );
This all works fine, besides the face that it only works after refreshing the page! The page gets loaded via js: $.mobile.changePage('f?p='+ $v('pFlowId') +':20:' + $v('pInstance') { transition:"slide", reloadPage:true });...
which also works fine so far. That same problem I had before when I was using a dialog instead of the popup. - only showing after refreshing the page.
This certainly must have something to do with how JQM loads and renders the page (besides the APEX-job) - a rather basic issue. I have also tried different ways of calling the page, with no difference to that problem.
I am on APEX 4.1.1, db 11g and I have a report which is quite slow to retrieve results from its query. The page has some filter fields (e.g. store code, dept code) in addition to the generic search field.
When the user lands on this page (from a menu page), the query runs before the page displays and this typically takes 1-2 mins without any filters yet set. The usual browser loading indicators are not obvious to the user and they might not be aware that it is working on the request.
I want it so that it will only run the query AFTER allowing the user to get to the page, let the user fill in some filter criteria and then click on the GO button. Therefore the query will run after the page is submitted. When you hit the GO button on the interactive report, a nice rotating apex_loader.gif appears, making it obvious to the user that it is working on the request.
I would prefer NOT to create 2 pages, one for user filter, and a second for the actual report as I have many reports/inquiries which fit this category and I would prefer NOT to have to create pairs of pages for each.
I have created a Search Sub region within a reports region. But the sub region is created at the bottom of the reports and I am unable to move it to the top. I want it to be displayed on top of the report but within the reports region.
View 4 Replies View RelatedI have an application that it will have over 200 pages. Each page will have a sidebar region with a number of lists, around 8-10 items. The lists references all pages in the app. Then, if I create a new menu list , I have to include this new list in all pages, it's painful. It's posible to have shared regions between pages like the shortcuts for messages in the user interface elements?
In this way, I will create an unique element including all lists that will be shared through all pages. This will greatly facilitate the work!I'm using Apex 4.1.
I am using APEX 4.0, my regions need to be displayed at "Display Point: Display Template Body 2" in column 2.I have 2 regions I want displayed horizontally, side by side.I want to use a parent region to contain them. I create my parent region, called it A, template = Reports, assign it to sequence = 10.I create my 2 sub region (B) and (C), sequence 20 and 30, template = Navigation, picking parent = A.By default, B displays above C. URL....
I copied the Navigation template, creating a new one called NAV2 and added this in the sub-region template section:(this cut/paste) doesnt display well here: it is the exact DIV begin/end block as posted above.
div style="float: left;"
#SUB_REGION#
div
I changed regions (B) and (C) to use template = NAV2, without any change in display behavior.I read further in the above post where it was recommended to reset the clear property, so I changed the above style like to: style="float: left;clear:none;".
I am using its value in a query by using sql collection array. My requirement is that I need to hide that shuttle. But when I hide the shuttle, its value is not retrived by the query.
View 4 Replies View RelatedI created list of values like Bar chart,Column Chart,Pie Chart.these list of values added to the text field named as Chat type. In same region i created 3 chart sub regions. My requirement is if i select chart type-pie chart.the page will show only pie chart region only.Same to Bar chart and Column charts also.
View 3 Replies View RelatedIn Oracle Apex 5 SOD it says it will have the following feature:
"New Multi-Row Edit Region Type – Define a new region type with a modern UI for updating multiple rows of data and allow multiple regions on one page"
[URL].......
If so, how likely it will allow dynamic query (PL/SQL) in addition to simple query? Also, how likely it will include advanced features like frozen columns with group headers, subgrid, etc.? It will be nice if the grid will adjust itself based on the width of the screen.
I had a few regions on my page, the 2nd did not start a new row so it appeared horizontally where possible.During some experimentation, I created a new region with a sequence in between that started new row, but even when that region was conditionally never, my original 2nd region started on new row.
Original:
Region 1 - Region 2(empty) - Region 3 (new row/col no)>
New region added:
Region 1Region 1.5 (added, new row)
Region 2
Region 3>
Region 1.5 not shown:
Region 1Region 2
Region 3>
Let me know if you would like a test case for better visualisation.
APEX 4.2 Theme 25 Oracle DB 11gr2 - I need to conditionally display Html5/Flash chart regions depending on browser compatibility, how to achieve this.
View 8 Replies View Relatedi have a html button. With the following attributes: onclick="return false" class="upd_description" A dynamic Action is listening on this button.
Event: Click
Selection-Type: jQuery Selector
JQuery Selector: .upd_description
static_URL: f?p=&APP_ID.:306:&SESSION.::&DEBUG.:306:P306_SER_SK:&P305_SER_SK.
as defined in my button attributes.
Button and dynamic action are on page 305. I can now open Page 306 as modal window but the page will close immediately.
We are using Application Express 4.1.0.00.32 on Wondows XP and Oracle version is 10g. I've created a report in APEX and the user is insisting on putting a header on each page in PRINT of the report which should contain the "from date" and "to date", which are present on the select criteria on top.
Can I somehow add from_date and to_date items in Title so that when they print the report, they'll see the from and to dates in the title?Or is there someother way to do this. The report is an interactive report with a control break and user prints the report with file->print.
In the login page, I want to add a text "Register" that when clicked will send the user to another page to register.
With a button, its simple because its inbuilt there,but I do not want a button,just this: Register
I want also to have the text in color not black.
I am new to APEX and I am developing an application to manage Oracle database user accounts. I have a page (8) that has text items for the username and the database name. I have a submit button (this works fine) that will issue the ALTER USER... statement to reset the user's password and unlock the account. I have another button that should:
get the value of the username - P8_USERNAMEassign it to an application item - FIND_USER_IN_DBredirect to page in application - to page 11
The issue is that FIND_USER_IN_DB does not get populated and page 11
which is a simple report with the following query:
SELECT *FROM valid_dbWHERE username = :FIND_USER_IN_DB;
How do I accomplish this?
I have different public page (page1) and different page for authorized user(page5).Upon successful login after process validation ,computation it should navigate to authorized user page 5 but the branching does work it keeps on going to page 1 .
View 8 Replies View RelatedUsing Application Express 4.2.1.00.08
Any problem using 4.2's One Level Tabs - Content Frame page where you have a parent region (of type content frame Body Container ) while number of child regions (of type Hide & Show Region - Borderless ), if you want to re-order them by changing the sequence, it has no effect when you run the page.
The regions still show in the same order top to bottom as it did before the update of sequences. Heading links (to show/hide child regons in content frames) has the same ordering as before.
Need to create a report based on date ranges and for this created a interactive report and two page item datepicker fields P15_fromdate and p15_todate. Report works fine with this criteria.But user wants one more field quarter(P15_quarter), When they select the quarter the range values has to get reset and as to get applied to report.
Issue here is unable to find a way to set the page range item values based on the quarter field selection
how to reset the page item fields.
i want to display a list of all users on a page those currently accessing or using the application. How do i accomplish this requirement?
View 1 Replies View RelatedI'm trying to set up a PL/SQL dynamic action that is triggered by clicking on a button. The dynamic action sets two values in a table and then I would like to redirect to another page. Setting the values works fine. The code is below:
declarel_information varchar2(255) := :P94_FILENAME;BEGINcommit;UPDATE VDI_METADATASET CREATEUSERLISTNAME = l_information, CREATEUSERLISTON = sysdate();commit;htp.init;owa_util.redirect_url('f?p=&APP_ID.:81:&APP_SESSION.::NO:::');END; The redirect fails with the following eror: "Error: parseerror: JSON.parse: unexpected non-whitespace character after JSON data"
how to redirect to a page from within PL/SQL . None of them result in success.
