I have created a Search Sub region within a reports region. But the sub region is created at the bottom of the reports and I am unable to move it to the top. I want it to be displayed on top of the report but within the reports region.
View 4 RepliesI have an application that it will have over 200 pages. Each page will have a sidebar region with a number of lists, around 8-10 items. The lists references all pages in the app. Then, if I create a new menu list , I have to include this new list in all pages, it's painful. It's posible to have shared regions between pages like the shortcuts for messages in the user interface elements?
In this way, I will create an unique element including all lists that will be shared through all pages. This will greatly facilitate the work!I'm using Apex 4.1.
I am using APEX 4.0, my regions need to be displayed at "Display Point: Display Template Body 2" in column 2.I have 2 regions I want displayed horizontally, side by side.I want to use a parent region to contain them. I create my parent region, called it A, template = Reports, assign it to sequence = 10.I create my 2 sub region (B) and (C), sequence 20 and 30, template = Navigation, picking parent = A.By default, B displays above C. URL....
I copied the Navigation template, creating a new one called NAV2 and added this in the sub-region template section:(this cut/paste) doesnt display well here: it is the exact DIV begin/end block as posted above.
div style="float: left;"
#SUB_REGION#
div
I changed regions (B) and (C) to use template = NAV2, without any change in display behavior.I read further in the above post where it was recommended to reset the clear property, so I changed the above style like to: style="float: left;clear:none;".
I created list of values like Bar chart,Column Chart,Pie Chart.these list of values added to the text field named as Chat type. In same region i created 3 chart sub regions. My requirement is if i select chart type-pie chart.the page will show only pie chart region only.Same to Bar chart and Column charts also.
View 3 Replies View RelatedIn Oracle Apex 5 SOD it says it will have the following feature:
"New Multi-Row Edit Region Type – Define a new region type with a modern UI for updating multiple rows of data and allow multiple regions on one page"
[URL].......
If so, how likely it will allow dynamic query (PL/SQL) in addition to simple query? Also, how likely it will include advanced features like frozen columns with group headers, subgrid, etc.? It will be nice if the grid will adjust itself based on the width of the screen.
I have created two regions in one page. I created some items but would like to share the items for both regions. When you create the item, you have to select which region it belongs to. Those items are supposed to be used by both regions, so I wonder if it is possible to share the items instead of creating the same items for region 2. I know I can create application item, but how to share items among different regions in the same page.
View 6 Replies View RelatedI have a page which, upon page load, some regions should be hidden. I've created a dynamic action which hides a couple regions (on page load), however I can see the regions for a moment as the page is loading, then disappear. Is there a way to ensure the regions are hidden when the page is rendered?
I've also tried using javascript, but I have the same issue (the regions are visible for a moment, then disappear).
I am using apex 4.0.2.00.07. I have a page with two regions. The first region has only one row and I have no problems accessing it and inserting those values into the table this is what I used to access one column from that one row APEX_APPLICATION.G_F03(1)
The second region is an interactive report, to which I have managed to add a checkbox and a textbox.
1)So if a checkbox has been checked off the row should be inserted
2) if the textbox has been entered it should replaceone of the values.
My question is how to access the second region? I started a loop based on the rows in the collection but that is as far as I got.
FOR idx IN 1..l_collectionTable_name
loop
end loop
I have 20 item fields in same form. i need to align them in sequential manner. For example x y z abcl m o p q r s xyzabclmopqrs are the items to achieve this what i have to do...
View 2 Replies View RelatedAPEX 4.1 / 11g
Theme 21
I have a page with about 8 Classic reports. 4 of them percentage values, 4 totals. I have one RG with a Percentage or total option. When I select the percentage radio, it should hide all the total regions. When I select the totals radio it should hide all the percentage regions. Simple? So I thought. This is what I did.
1. Created a RG(P2_RG) -> Page value is redirect and set value.
2. STATIC:Percentage;P,Total;T
In the RG, I have created a normal DA which has the true and false events as follows.
Event -> Change
Items -> P2_RG
equal to -> P
In the true actions, I have hidden the 4 totals regions.
shown the 4 Percent regions.
In the false action, I have shown
hidden the 4 percent region
shown the 4 totals region.
The event specification for one these true actions is
Action -> Hide (If I am hiding)
Fire when event is ->True
Selection type -> region
Region -> The region I want to hide/show.
But it does not work! I tried to replicate the issue on apex, by using a small example but could not. Works fine in apex following the same process.
[URL]
I tried to debug by having a display item to show the value when I change the radio button. The values are changing properly. I tried actually, adding a condition filter in the region itself by using the "Value of item/column in expression1 = expression 2" where expression one I tried :P2_RG and expression 2 as P but that just hides the whole region.
I had a few regions on my page, the 2nd did not start a new row so it appeared horizontally where possible.During some experimentation, I created a new region with a sequence in between that started new row, but even when that region was conditionally never, my original 2nd region started on new row.
Original:
Region 1 - Region 2(empty) - Region 3 (new row/col no)>
New region added:
Region 1Region 1.5 (added, new row)
Region 2
Region 3>
Region 1.5 not shown:
Region 1Region 2
Region 3>
Let me know if you would like a test case for better visualisation.
APEX 4.2 Theme 25 Oracle DB 11gr2 - I need to conditionally display Html5/Flash chart regions depending on browser compatibility, how to achieve this.
View 8 Replies View RelatedUsing Application Express 4.2.1.00.08
Any problem using 4.2's One Level Tabs - Content Frame page where you have a parent region (of type content frame Body Container ) while number of child regions (of type Hide & Show Region - Borderless ), if you want to re-order them by changing the sequence, it has no effect when you run the page.
The regions still show in the same order top to bottom as it did before the update of sequences. Heading links (to show/hide child regons in content frames) has the same ordering as before.
i need to position my canvas at run time.
View 3 Replies View RelatedWe have integrated Oracle Access Manager 11gR1 with Oracle Apex 4.1. The OAM-Apex integration is working fine. Now we want an additional header variable to be passed from OAM to the Apex application. This new header variable will be user's sAMAccountName in Active Directory. OAM is integrated with AD and the AD users are successfully able to access the Apex applications.
The three header variables which are configure in OAM right now are:
Header variable name Value
1. OAM_REMOTE_USER $user.userid
2. OAM_REMOTE_USER_EMAIL $user.attr.mail
3. OAM_REMOTE_USER_GROUPS $user.groups
We need an additional header variable as mentioned below:
Header variable name: OAM_SAMACCOUNTNAME
Value: $user.attr.samaccountname
The new header variable was added in the OHS server's dads.conf file like shown below:
=========== dads.conf =============
...
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER_GROUPS
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER_EMAIL
PlsqlCGIEnvironmentList HTTP_OAM_SAMACCOUNTNAME
But we are not able to read the value of this attribute in the Apex application.On the Apex application, we have a text box which shows the value of this header variable. This textbox is attached with the following stored procedure call to fetch the header variable:
===================
begin
:P1_HEADER_VALUE := owa_util.get_cgi_env( 'HTTP_OAM_SAMACCOUNTNAME' );
end;
The textbox shows the correct value if HTTP_OAM_REMOTE_USER is passed to the get_cgi_env method but does not shows anything when HTTP_OAM_SAMACCOUNTNAME is passed to the same method. if I am missing some configuration to pass the HTTP_OAM_SAMACCOUNTNAME haeder variable from OAM to Apex.
I have multiple application set-up using session sharing within the workspace.Technically all works fine, however it does not play nice with user behaviour.
Example:
Users logs into APP_ID:100. Since he isn't authenticated yet, he provides user/pass and the APP_SESSION is authenticated.
Now if the user switches using to another application (using a link provided in application 100) he gets redirect to APP_ID:101:APP_SESSION all is fine.
The session is already authenticated, the application shares the session and the user gains access to app 101 without having to authenticate again. All's fine!
However users don't behave they way. Instead of using an easy link in the application. They will use their own bookmark or type in the url for app 101 manually. That way the next application is either called with f?p=101:1:[SOME OLD SESSIONID FROM BOOMARK] or f?p=101 (with no further page or session info) In both cases instead of using the already authenticated session apex spawns a new session, which of course isn't authenticated yet thus forcing the user to authenticate and come complaining they have to login again.
Similar behaviour problems exists when the user opens a browser and tries to open both applications in each in a tab next to each other.Both tabs fetch there own initial session id and start writing it to the same cookie each in turn invalidating the other tab's session.These can lead to some fanatic ping pong actions. Thus it's impossible to open 2 applications sharing session in the same browser.
Is there any remedy for these situations?Can apex be as smart as for instance first trying to resume the session stored in the cookie and only if that session is invalid, start a new session?
how to use checkbox item, and trying to get checked options values via application global arrays. So, this may be quite simple question, but I'm completely stuck here...
When I was looking through various threads and guides, I've encountered checkbox corresponding array names like "g_f01" - "g_f50". And so far i saw that these names are derived from item name in generated HTML code, for example:
<input type="checkbox" name="*f10*" value="3" />
And this one stands for array name "g_*f10*".However, when I tried to do the same thing - i receive item name which looks like "*p_v04*", and therefore, I can't figure out, which array name should I choose to adress it properly.
My generated HTML snippet:
<input type="checkbox" id="P6_ANSWER_0" name="*p_v04*" value="3"/>
i want to display a list of all users on a page those currently accessing or using the application. How do i accomplish this requirement?
View 1 Replies View RelatedAPEX 4.0 Sometimes, I am getting the below error when I tried to logging into APEX workspace (after giving workspace name, User name and password), Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
ErrorERR-7621 Could not determine workspace for application (:) on application accept. I found some threads related to this but in different way not exactly when I am getting this error.
After 2 or 3 times, this error will not come and I can able to logging into workspace What is the cause for this issue??
Each time when I import an application into my workspace in local 10g XE using the APEX 4.2 Application Builder, I get the "ORA-02291, constraint wwv_flows_fk violated..". The application I whant to import was originally exported from [URL]. I found out, that it has to to with wwv_flow_application_install.get_workspace_id in the installation script, which obviously returns NULL and not my current workspace id as I suppose it should. I replaced wwv_flow_application_install.get_workspace_id by '<my worskspace id>' and then the import does work.
View 0 Replies View RelatedI have an application that I'd like to prevent activity in after a certain time of day, say 3pm. Is there any way I can force logout of all current users and then prevent re-login until 9am the next day (short of deleting all of their login credentials and then recreating them the next morning)?
View 7 Replies View RelatedWe have developed an application for our clients,planning to deploy it in client server soon. we have plans to support the application in future,so we want to restrict the clients from any modifications. By Doubt is, 'build_status=Run only' alone,cannot protect our application from client developers to edit our application,
Because though we install our application as 'Run Only' at the time of installation in client instance,we can still import the original application and change the type to 'Build and Run Application',and run the new application as 'Build and Run'.(which is not supposed to) we want to make sure,if there is any way we can protect our application from modifications after client side installation.
I'm trying to connect a javascript UI control within my page to an APEX Application Process. The control calls the application process via AJAX and appends a variable number of GET / POST parameters to its URL.What is the best way to obtain these parameters from within the PLSQL procedure of the process? Or is there a better way to connect my javascript AJAX control to the Database behind my APEX app?
View 4 Replies View RelatedI have some applications on Apex public workspace (apex.oracle.com), and suddenly the Tree View, on Application Builder stopped showing any content. If I select "Component View", I see the page components, but if I switch to tree view, it shows me only some empty frames.
View 2 Replies View RelatedI'm trying to set up a PL/SQL dynamic action that is triggered by clicking on a button. The dynamic action sets two values in a table and then I would like to redirect to another page. Setting the values works fine. The code is below:
declarel_information varchar2(255) := :P94_FILENAME;BEGINcommit;UPDATE VDI_METADATASET CREATEUSERLISTNAME = l_information, CREATEUSERLISTON = sysdate();commit;htp.init;owa_util.redirect_url('f?p=&APP_ID.:81:&APP_SESSION.::NO:::');END; The redirect fails with the following eror: "Error: parseerror: JSON.parse: unexpected non-whitespace character after JSON data"
how to redirect to a page from within PL/SQL . None of them result in success.
I'm doing a small application in Apex 4.2.0.00.27 mobile themes.
Application is used to search for books.Will work on a PC Windows with touchscreen.
How do I add a virtual keyboard to my application?
version 4.0.2.00.07
I had an error importing an application into Production that was exported from Development. The application exists and I was trying to replace it.
The error I received was:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful.
ORA-20001: Error creating dynamic action sub-action name="NATIVE_JAVASCRIPT_CODE" id="9503820976918886"
ORA-02291: integrity constraint (APEX_040000.WWV_FLOW_PAGE_DA_A_AR_FK) violated - parent key not found<pre>
begin wwv_flow_api.create_page_da_event ( p_id => 9504132415918888 + wwv_flow_api.g_id_offset ,p_flow_id => wwv_flow.g_flow_id ,p_page_id =>I
opened the SQL that was created from the export utility and this is where it errored:
begin
wwv_flow_api.create_page_da_event (
p_id => 9503820976918886 + wwv_flow_api.g_id_offset
,p_flow_id => wwv_flow.g_flow_id
,p_page_id => 6
,p_name => 'Add tooltip to Numeric filter operators'
,p_event_sequence => 40
[code]....
Unless I'm not understanding this error it means that it can find the ACTION part that is attached to the WHAT part of this Dynamic Action? The Dynamic Action does work when the application is run (in Development)also, there are 3 others that are similar to this one. The export was created by the export utility in the Application Builder.
If I export only the page and import that into Production the import is successful and the page runs correctly. This is error is happening only when I try to import the entire Application.There are many other changes made which is why I was trying to do an Application export/import instead of individual pages.
I have to modify the Form layout of an existing application (Application Express 4.0.2.) where the data for each field is retrieved using SQL statements
Presently the form looks something like this and the Data for each field is rendered properly in this layout:
UNIT # : 123456
ADMISSION #: 2012101510 DISCHARGE DATE: ADMISSION DATE:
FIRST NAME: JON LAST NAME: DOEFIRST NAME, LAST NAME and UNIT # are all "Display Only" item type.
What I'm trying to do is to move "FIRST NAME" underneath "LAST NAME" and "UNIT #" next to "LAST NAME" This part is very simple. However, the issue I'm having is as soon as the "UNIT #" is moved next to "FIRST NAME", the data for "FIRST NAME" and "LAST NAME" simply disappear
This is how it looks
ADMISSION #: 2012101510 DISCHARGE DATE: ADMISSION DATE:
FIRST NAME: UNIT #: 123456
LAST NAME:
I have played around for hours and even created from scratch a new page with a new form using SQL statements to pull the data for each field, only to get the same result.
I have an application item that receives a web service result. This result is like 'MARIA','JOSE','JESUS'. I'm using this string into the parameters of the interactive report, but this is not recognized. I'm showing the content of the application item into a pl sql region and the content is 'MARIA','JOSE','JESUS', when I include this application item into the query, the IR shows me 'MARIA','JOSE','JESUS'
View 1 Replies View RelatedHow do I center a button within a region? I tried 'align="center"' but this seemed to be ignored. The button is at the left of the screen. Also, what are the 'display points' (Page Template Region Position 1-8) used for, and why is there a specification for column position of 1-9? Could these be attributes that will allow my button to be centered on the window instead of on the left?
View 3 Replies View Related