I had a few regions on my page, the 2nd did not start a new row so it appeared horizontally where possible.During some experimentation, I created a new region with a sequence in between that started new row, but even when that region was conditionally never, my original 2nd region started on new row.
Original:
Region 1 - Region 2(empty) - Region 3 (new row/col no)>
New region added:
Region 1Region 1.5 (added, new row)
Region 2
Region 3>
Region 1.5 not shown:
Region 1Region 2
Region 3>
Let me know if you would like a test case for better visualisation.
I'm running a mobile application on a hosted Apex environment which uses lots of jQuery mobile. The environment has been updated to 4.2 recently, and since that happened pages that I had setup to use the content grid, to show content in 3 columns no longer works, there only appears to be 1 column now.
Apex 4.2I currently have a report column in a classic report that has a Column Formatting Attribute as below. This works fine it shows a map icon that when you click on it goes off to google maps and put 2 geo points on a map. However I need to change this report column so that the HTML expression will be different dependent on the value returned so if the column returns 1 then the HTML Expression will be slightly different.
I think I can do this in the report source directly with a case statement and include the HTML in that for the column but how do you handle all the quotes within the SQL statement. e.g.
Original Query SELECT parcel_id ,status ,LOCATION ,scan_date ,scan_id ,driver_comments ,card_id ,valid_geo_codes -- this is my html column ,property_geo_lat ,property_geo_long ,scan_geo_lat ,scan_geo_long ,broke_geo ,line_1 ,post_code FROM vw_parcel_history_details WHERE parcel_id = :p341_parcel_id ORDER BY scan_date New Query SELECT parcel_id ,status ,LOCATION [code].....
various iterations of that large html string but I do not know how to format it because off all the quotes?
I have created a Search Sub region within a reports region. But the sub region is created at the bottom of the reports and I am unable to move it to the top. I want it to be displayed on top of the report but within the reports region.
I have an application that it will have over 200 pages. Each page will have a sidebar region with a number of lists, around 8-10 items. The lists references all pages in the app. Then, if I create a new menu list , I have to include this new list in all pages, it's painful. It's posible to have shared regions between pages like the shortcuts for messages in the user interface elements?
In this way, I will create an unique element including all lists that will be shared through all pages. This will greatly facilitate the work!I'm using Apex 4.1.
I am using APEX 4.0, my regions need to be displayed at "Display Point: Display Template Body 2" in column 2.I have 2 regions I want displayed horizontally, side by side.I want to use a parent region to contain them. I create my parent region, called it A, template = Reports, assign it to sequence = 10.I create my 2 sub region (B) and (C), sequence 20 and 30, template = Navigation, picking parent = A.By default, B displays above C. URL....
I copied the Navigation template, creating a new one called NAV2 and added this in the sub-region template section:(this cut/paste) doesnt display well here: it is the exact DIV begin/end block as posted above.
div style="float: left;" #SUB_REGION# div
I changed regions (B) and (C) to use template = NAV2, without any change in display behavior.I read further in the above post where it was recommended to reset the clear property, so I changed the above style like to: style="float: left;clear:none;".
I created list of values like Bar chart,Column Chart,Pie Chart.these list of values added to the text field named as Chat type. In same region i created 3 chart sub regions. My requirement is if i select chart type-pie chart.the page will show only pie chart region only.Same to Bar chart and Column charts also.
In Oracle Apex 5 SOD it says it will have the following feature:
"New Multi-Row Edit Region Type – Define a new region type with a modern UI for updating multiple rows of data and allow multiple regions on one page"
[URL].......
If so, how likely it will allow dynamic query (PL/SQL) in addition to simple query? Also, how likely it will include advanced features like frozen columns with group headers, subgrid, etc.? It will be nice if the grid will adjust itself based on the width of the screen.
I have created two regions in one page. I created some items but would like to share the items for both regions. When you create the item, you have to select which region it belongs to. Those items are supposed to be used by both regions, so I wonder if it is possible to share the items instead of creating the same items for region 2. I know I can create application item, but how to share items among different regions in the same page.
I have a page which, upon page load, some regions should be hidden. I've created a dynamic action which hides a couple regions (on page load), however I can see the regions for a moment as the page is loading, then disappear. Is there a way to ensure the regions are hidden when the page is rendered?
I've also tried using javascript, but I have the same issue (the regions are visible for a moment, then disappear).
I am using apex 4.0.2.00.07. I have a page with two regions. The first region has only one row and I have no problems accessing it and inserting those values into the table this is what I used to access one column from that one row APEX_APPLICATION.G_F03(1)
The second region is an interactive report, to which I have managed to add a checkbox and a textbox.
1)So if a checkbox has been checked off the row should be inserted 2) if the textbox has been entered it should replaceone of the values.
My question is how to access the second region? I started a loop based on the rows in the collection but that is as far as I got.
FOR idx IN 1..l_collectionTable_name loop end loop
I have to modify the Form layout of an existing application (Application Express 4.0.2.) where the data for each field is retrieved using SQL statements
Presently the form looks something like this and the Data for each field is rendered properly in this layout:
UNIT # : 123456 ADMISSION #: 2012101510 DISCHARGE DATE: ADMISSION DATE: FIRST NAME: JON LAST NAME: DOEFIRST NAME, LAST NAME and UNIT # are all "Display Only" item type.
What I'm trying to do is to move "FIRST NAME" underneath "LAST NAME" and "UNIT #" next to "LAST NAME" This part is very simple. However, the issue I'm having is as soon as the "UNIT #" is moved next to "FIRST NAME", the data for "FIRST NAME" and "LAST NAME" simply disappear
This is how it looks ADMISSION #: 2012101510 DISCHARGE DATE: ADMISSION DATE: FIRST NAME: UNIT #: 123456 LAST NAME:
I have played around for hours and even created from scratch a new page with a new form using SQL statements to pull the data for each field, only to get the same result.
I have a show/hide region of type HTML with empty region source which I use to show/hide a subregion (tabular form)because I don't like the layout of a show/hide region when it is shownthis worked without a problem in APEX 4.1.1
however in 4.2 the tabular form is just a couple of pixels widehave been playing around with grids but can't seem to find the right combination of settingsthe layout is messed up
I put the app on apex.oracle.com : workspace : xonixrs login/password : demo/demo
I have 20 item fields in same form. i need to align them in sequential manner. For example x y z abcl m o p q r s xyzabclmopqrs are the items to achieve this what i have to do...
I have a page with about 8 Classic reports. 4 of them percentage values, 4 totals. I have one RG with a Percentage or total option. When I select the percentage radio, it should hide all the total regions. When I select the totals radio it should hide all the percentage regions. Simple? So I thought. This is what I did.
1. Created a RG(P2_RG) -> Page value is redirect and set value.
2. STATIC:Percentage;P,Total;T
In the RG, I have created a normal DA which has the true and false events as follows.
Event -> Change Items -> P2_RG equal to -> P
In the true actions, I have hidden the 4 totals regions. shown the 4 Percent regions. In the false action, I have shown hidden the 4 percent region shown the 4 totals region.
The event specification for one these true actions is
Action -> Hide (If I am hiding) Fire when event is ->True Selection type -> region Region -> The region I want to hide/show.
But it does not work! I tried to replicate the issue on apex, by using a small example but could not. Works fine in apex following the same process.
[URL]
I tried to debug by having a display item to show the value when I change the radio button. The values are changing properly. I tried actually, adding a condition filter in the region itself by using the "Value of item/column in expression1 = expression 2" where expression one I tried :P2_RG and expression 2 as P but that just hides the whole region.
and the other columns are target actual and current year, previous year and next year.the layout should be in pivot table lay out as follows here the three columns will be saved dynamically as 2012,2011,2013 and the respecitive percentage in target and actual column
Is there a way to make a button conditional on the existence of another app in the same workspace. What I am trying to do is have a MAIN app and several other MODULE apps in the same workspace. Then a button on a form in the MAIN app that will redirect to a specific page in one of the MODULE apps. If the MODULE app does not exist, meaning not installed, then the button would be invisible.
I implemented the re Captcha plugin and it works ok. What I want to do is, on the same page where the captcha is displayed, to have a report region that is displayed conditionally based on the captcha result.
More specifically, the page has two items for user input (the captcha and a text item) and a Submit button. If the captcha is successful, then the text item will be submitted and the region displayed. The problem I'm running into is that the text item is always submitted regardless of the captcha.
I have an item that does not save to the database.it is conditional read only based on the value in another column, when it is not read only it displays as a Select list.. then whatever is chosen triggers a dynamic action that sets other items.so setting it as a display only is not an option.
after upgrading from 4.0 to apex 4.2 this gives error: Session state protection violation: This may be caused by manual alteration of protected page...
the only workaround I have found is to set the Read Only to none, then create a dynamic action that conditionally sets the field to disabled..This works, but my problem with it is that it looks different than the read only..read only was Black Text and no textbox..disabled is a text box with greyed out text that is hard to read for some of the users..
For our customer we have build a custom login page. The form we currently made has de following items:
- Username - Password - Select list for selecting the task type
When the customer enters his username, automatically the select list of the task type will be refreshed to get only the task type where the customer has the rights to do it. This part works...It can occur that a customer has only one task type (which is default) then we want to hide the select list. This part doesn't work
We used APEX version 4.1.1.What we did is:
- One action item to refresh the selection list (works) - One action item to hide the selection list by starting the application (works) - One action item to show the selection list only when the selection list has more than one result. For this part we used the conditional part of the action item (Function returning a boolean).
In the query (inside the function) we want to use the entered username, looking into the application in the session state I saw the correct username, but for some reason the function cannot use this entered username, it becomes empty. When I use a hardcoded username the code works.
Why I cannot use a username into the conditional part of the Action Item.
We have an issue after migrating to apex 4.2.1. We have a select list and use another couple of dummy items to be used as its label instead of giving the text value to the LABEL control. Only one of the dummy items is shown as a label for the select list conditionally based on another value. It was working fine with the earlier versions upto 4.1, but with the introduction of grid in 4.2, its now displaying the select list on a new row (ie the lable in one row and the select list on the next row).
However, we really would like to solve this by having a way to display the label of the select list either in "required format style" or as an "optional style". The display style should be determined only at runtime.
Example. Say P100_MY_SELECT_LIST is the select list
The label for this item is "My Select List Label"
I have another dummy item P100_DUMMY
if P100_dummy = 1 then the label "My Select List Label" should be displayed in red and with an * *My Select List LabelOtherwise it should be in black and without * My Select List Label.
Any problem using 4.2's One Level Tabs - Content Frame page where you have a parent region (of type content frame Body Container ) while number of child regions (of type Hide & Show Region - Borderless ), if you want to re-order them by changing the sequence, it has no effect when you run the page.
The regions still show in the same order top to bottom as it did before the update of sequences. Heading links (to show/hide child regons in content frames) has the same ordering as before.
(Oracle Grid & Real Application Clusters Oracle Grid Computing with RAC) from rampant tech press. I have already ordered it 3 months back and still have not received it as its not printed yet or as i am told is in press. I would be glad to have a copy soon if its published.
Having this issue in Apex 4.1.1 and 4.2 (haven't tried it in versions prior to 4.1.1 yet). So I got my standard IR, and trying to create a private report with control breaks, aggregations.
Once I save it as a private report, It applies the same on my primary report.
It's no big issue as I can flip back to Primary report and delete the control breaks, aggregations but is some kind of bug? Ideally it shouldn't modify my primary report unless I try to save it as "Default Report Setting".
I have a Page containing 3 reports and I was wondering if it is possible to re-execute only one of the these reports using a button or preferably a Select List which allows me to choose which of the 3 reports I wish to 'refresh/re-execute'. I may be totally wrong here but I assumed that choosing the option to submit a Page will cause all regions to refresh i.e. re-execute the SQL queries they are 'based on'.
I have some Javascript in an Apex page, running in 'Execute when page loads'. It does some stuff to a results grid. It works fine on page load, but then doesn't run when I page through, or sort the grid. I presume this is because the grid is being sorted / paged using Ajax, which means the page isn't being fully loaded. Is there anywhere else I can put the code so it gets applied to the grid on sorts and paging?
I have a Report Region with Type SQL Query and Source "SELECT * FROM <table>" where <table> has a primary key from a sequence. Under Report Attributes, I have Report Column "ST_NM" with Show and Sort checked and having a Sort Sequence of "1". I assume this is to set the iniital display sequence but regardless, the report rows display in Primary key order initially.
To try it: [URL]
1) How do I set the initial display sequence to be other than the primary key sequence?
