I have a requirement to view the PDF content in the apex page region, I am using Apex 3.2 and Oracle 10 Enterprise edition. I Uploaded the PDF file in the shared component under static file. Now i need to view the content of the PDF file. method to view the PDF content.
I saw the link in denes blog here he shows how the PDF is getting displayed. but there is no steps of methods mentioned
[URL]...
I'm using Apex 4.2. On click of a button, I refresh 2 Standard Region Reports with a Dynamic Action. This dynamic action has been working without problems for WEEKS and all of a sudden i'm getting the ORA-20876: Stop APEX Engine error when I click the button.
In the dynamic action, I removed the refresh of the second report and now the error does not occur. If I add the second refresh action back in, it throws the above error. I've even tried making the second report identical to the first and the refresh action fails. why this is failing on the second refresh action since the second report & region is IDENTICAL to the first report now.
I would like to display the row number in the report region at the beginning of each row for each page (based on the number of rows to display per page).
So if the number of rows per page is 15, I would want to show each row from 1 to 15. When going to the next page (16 - 31) I would like to show row 1 to 15 again next to each row. And if the number of rows per page is 20, I want to see row numbers 1 to 20 on each page.
Since I believe an Update button only processes the current page, I would like to then use this row numbers (1 - 15) to get the values of the displayed column for each row to perform an insert to another table.
Is possible to remove the "show all" of the Region Display Selector? How can i do this?
View 8 Replies View Relatedi I am using APEX4.2 and created
(1) a drop down list item called P38_DESK which contains a list of desks such as A, B, C
(2) a Chart region with region title: Chart Mvt by &P38_DESK.
(3) a dynamic action to "refresh" the Chart region if the value of P38_DESK is changed.
I can see that everytime the desk is changed from the drop down list, the chart section/region gets refreshed accordingly but NOT the Chart's region title.
It only showed the first value I chose. e.g. Chart Mvt by A So in APEX4.2, how can the CHART's region title be changed dynamically ( without submitting the entire page ) to reflect the value from the drop down list P38_DESK ?
On package application "Customer Tracking", there is good example about Modal Page. Quite simple but it work quite nicely.The step to create this Modal Page:
- Create new region, set display point: After Header and use region template: Modal Region and set the Static ID (eg. ActivityModal)
- Create the page item and put it on the above region (eyample: Name, Company etc.)
- Create a button, set the action to "Redirect to URL" and enter the URL target to: javascript:openModal('ActivityModal');
Now when you click on the button, the modal page will be display.How can I pass a parameter to the modal page, example: I want to pass text 'Johnny' to the Name page item which is on the modal region.
Apex 4.1
Theme 21
I have select list which has null and other values. I have created a blank HTML region with the following text
Report for the year &P2_YEAR. and for geography &P2_GEOG.
Now P2_YEAR works fine because, it is always populated with a year. However, &P2_GEOG has 'All' as null value since we can see the report for all geographies. However, if the all option is selected, the above &P2_GEOG. shows as null. Since its not a PL/SQL proc, I cannot put in a NVL. I am guessing one possible way is to write a PL/SQL code before region and then check if its null and then try to populate a new hidden field and show, something like that. Wondering if there is a way to do it directly in the HTML region?
I have a page with two regions the top region is an html region where users enter query criteria and generate an interactive report in the second region. The second region only displays if there are results from the query in the first region.
I would like to display a "No Results Found" message rather than a blank screen if there are no results found. However, I don't know exactly how to do that. I tried to do it in the Interactive Report region, however, once I added the Conditional display to only when exists rows in the Interactive Report from the query criteria.
I'm working on Apex 4.1.1.00.23 in a 11g XE Data Base, I want to display a Image in a Report, I can do it using the "+BLOB Download Format Mask+", but the images displays at original size and I want to display them smaller.
I've read that you have to create a procedure, a SYNONYM and call them in the src of the img tag. as Zsuzsi Vadasz mentions here [URL] But I remember that I was able to create some items in reports with Apex functions, I think they were from APEX_ITEM Package, so I want to know if there is a way to create the "+Display Image+" item with one function of APEX.
We have many many APEX applications in APEX 3.0 running on a 10.2.0.4 database that needs desperately to be upgraded. As a test, I've set up a clean 11gR2 database and copied the production APEX database into it via datapump. I set up APEX Listener, as I don't have any OAS sitting around and the EPG doesn't seem to be supported for APEX 3.0... the Listener doesn't say one way or the other.
When trying to log in, I get the login page, but it tries to reference files such as apex_get_3_1.js while I only have files such as htmldb_get.js in my images directory in production. I noticed it is looking for what appears to be 3.1 files instead of 3.0 files... which concerns me.
The APEX listener appears to be more than just a Java PL/SQL gateway.
Is there a minimum version of APEX the APEX Listener supports?
I tried to follow Pivot query using XML option in APEX
I can get the data into the xml serialized state, but how do I display the actual values in a region? See my example app below. I want the two far right columns in the Pivot XML region to duplicate what is in the original version.
[URL].......
I have a html region with the following
<html>
<head>
<title>Report</title>
</head>
<script language="JavaScript1.2">
function items()
[code]...
I have a text box item "BINDTEST" that has html element set to:onchange="items();"
I have a button with a url redirect of:
javascriptopon[URL}...
When I click on the button, popup window opens with test url but bindtest1 variable is not appended. What is proper form for trying to get value of bind variable in the url.
We have integrated Oracle Access Manager 11gR1 with Oracle Apex 4.1. The OAM-Apex integration is working fine. Now we want an additional header variable to be passed from OAM to the Apex application. This new header variable will be user's sAMAccountName in Active Directory. OAM is integrated with AD and the AD users are successfully able to access the Apex applications.
The three header variables which are configure in OAM right now are:
Header variable name Value
1. OAM_REMOTE_USER $user.userid
2. OAM_REMOTE_USER_EMAIL $user.attr.mail
3. OAM_REMOTE_USER_GROUPS $user.groups
We need an additional header variable as mentioned below:
Header variable name: OAM_SAMACCOUNTNAME
Value: $user.attr.samaccountname
The new header variable was added in the OHS server's dads.conf file like shown below:
=========== dads.conf =============
...
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER_GROUPS
PlsqlCGIEnvironmentList HTTP_OAM_REMOTE_USER_EMAIL
PlsqlCGIEnvironmentList HTTP_OAM_SAMACCOUNTNAME
But we are not able to read the value of this attribute in the Apex application.On the Apex application, we have a text box which shows the value of this header variable. This textbox is attached with the following stored procedure call to fetch the header variable:
===================
begin
:P1_HEADER_VALUE := owa_util.get_cgi_env( 'HTTP_OAM_SAMACCOUNTNAME' );
end;
The textbox shows the correct value if HTTP_OAM_REMOTE_USER is passed to the get_cgi_env method but does not shows anything when HTTP_OAM_SAMACCOUNTNAME is passed to the same method. if I am missing some configuration to pass the HTTP_OAM_SAMACCOUNTNAME haeder variable from OAM to Apex.
I've created a interactive report, and i have more items than my window behaves. So, i want to separate in two regions, and put in one region a scroll bar. How i can do this?
View 3 Replies View RelatedI have 2 regions in my application one is html form region and another is tabular form .I created 6 items in html region and created DA for the items to hide according to the value of items and then created tabular form
find below the sample link
[URL]...
user name: aneesmohamed.m@gmail.com
psswd: symphony
once i select the first item(declaration letter) it will show the second item (applicacable) perfectly,but when i select applicable as yes and discrepancy then all the items become misplaced,
11gxe , apex 4.0 , firefox 24 ,i want to decrease width of a specific region , how ?
View 3 Replies View RelatedI am using Apex 4.0 with oracle 11g.I have a requirement where I need to call a page in a region in different page.
For example. I have 2 pages page1 and page2
I need to call the page1 in page2 region.
How do I center a button within a region? I tried 'align="center"' but this seemed to be ignored. The button is at the left of the screen. Also, what are the 'display points' (Page Template Region Position 1-8) used for, and why is there a specification for column position of 1-9? Could these be attributes that will allow my button to be centered on the window instead of on the left?
View 1 Replies View RelatedHow do I center a button within a region? I tried 'align="center"' but this seemed to be ignored. The button is at the left of the screen. Also, what are the 'display points' (Page Template Region Position 1-8) used for, and why is there a specification for column position of 1-9? Could these be attributes that will allow my button to be centered on the window instead of on the left?
View 3 Replies View RelatedI have a translated application in Apex, my Apex version is 4.2.1.00.08. The application is in production version, many people are using it on daily basis. The application's primary language is English, and it has translations for 5 languages. Everything is working fine now; even if there are minor changes in the application, we are able to seed it, download the XLIFF files and than publish the modifications into all translations. Simple so far. My problem is that I wanted to 'clone' the application including its translations to a new one since I plan to rebuild some parts of it. I want to keep the current version untouched, not to bother users. The new application should be in the same workspace, with a new ID. I have tried a couple of approaches: Copy the primary application enabling the option 'copy translation' - this creates a new app, and also seems to create new translated applications, which are empty (not seeded, not published). Export the primary application and than import it with a manually defined new application ID. Than do the same with the translated applications and set the proper IDs in the translation mapping part of Shared components > Translation. When I try to run the primary application, it is working, but for translated versions... Only an error saying that the application page does not exist. The purpose is to clone the whole thing by keeping the connection between the primary and the translated applications, so that if I change something in the primary application, it can be seeded into the translated ones later. In the same time I want to keep translations as well, since there are thousands of strings...
View 2 Replies View RelatedI just noticed on apex.oracle.com (4.2) that I couldn't find the region source for flash charts. I expected to find it under the Region Definition tab.
Has this moved or will it be included in a later release?
In Application Builder, when editing an item's properties there is a handy 'Up' arrow at the top right of each region which takes you back to the top of the page. Is there any way of adding something similar to an actual page region as this would be useful when creating particularly large pages (I know, we should design smaller pages but that's not always possible).
View 11 Replies View RelatedHow to create more than 1 body in a single region. E.g i created report region and under body tag in region all other charts reports are created.
i dont want that .. i want to create different bodies in a single region.
I've created a new appliacation which has a home page and I've created a report page which updates a table. I want to add a link to my homepage, as a text line for example UpdateTable, and when I click the link, it goes to my report page. I've had a look in my Apex CookBook, and it says I do this by using the Navigation region in my home page. The problem is I don't seem to have a navigation region in my home page. I thought initially it meant the navigation bar, but I now realise this is the header bar. Do you know how I can create a navigation region in my home page..?
View 2 Replies View RelatedI am new to apex , procedure to change the icon in List Region....... see the below link
[List Region Image[URL]....
I have an APEX page with a master and a detail. The master is a classic report with a column link which sets an hidden item on my
page:javascript:$s('P280_DAK_ID','#DAK_ID#');
I have a dynamic action which reacts on change of the item P280_DAK_ID.It then refreshes the detail region which is a PL/SQL region with the following:
begin apex_p280.show_xml(p_dak_id => v('P280_DAK_ID'));end;
This prints a few pieces of text to the screen, nothing special. Everything works except the refresh of the detail region.This is due to the fact that the new value of P280_DAK_ID is not in the session state yet. So my question is: what would be a nice solution to set the item in the session state without a submit? With a normal region I could fill in 'Page items to submit', but with a pl/sql region I can't.
I have just implemented a "Data Load" function which is the OOTB page type in apex 4.2 which allows the end user to go through a wizard and import csv data into a table.
When the user is viewing the data to be imported - they have to scroll across the length of the screen (depending on how many columns you are loading). I noticed there is a Region template called "Scrollable Content Region". I tried applying this template to my region, and when this didn't work, to a container region.
The scrollbars appear (horizontally and vertically) but they are greyed out as the region is still at max width and you have to use the browser to scroll instead.I think this looks untidy as the header colour-styling ends, as well as other regions being stretched.
Does version 4.2 create a new db session for each report run on a page?
The reason I ask is we have a page with 4 report regions, each querying a global temporary table that is populated in a 'Before Regions' page process. The first report displays the correct data, but the others return 'No Data Found' and it is because the Global Temporary Table has been cleared out following the first report. This did not happen in 4.1.
I know we should be using Apex Collections, and we will in future, but time is at a premium to get this live
I have an interactive report which needs a horizontal scroll bar as it holds too much information for the screen, the problem is when a user scrolls the search bar is lost
i wanted to know if this could be changed by moving the interactive search (the whole action bar) to another form which would sit above the report.
I have what I hope is a simple question. I have a SQL Report region and I want to add more padding to the left and right sides of the table cell. I don't want to change the style sheet because I don't want to affect other pages. But I tried adding style attributes on the "Region HTML table cell attributes" field but I still can't get it to work. give me an example of how I can do this?
View 9 Replies View Related