Application Express :: How To Display 4.2 Chart Region Title Dynamically
Aug 21, 2013
i I am using APEX4.2 and created
(1) a drop down list item called P38_DESK which contains a list of desks such as A, B, C
(2) a Chart region with region title: Chart Mvt by &P38_DESK.
(3) a dynamic action to "refresh" the Chart region if the value of P38_DESK is changed.
I can see that everytime the desk is changed from the drop down list, the chart section/region gets refreshed accordingly but NOT the Chart's region title.
It only showed the first value I chose. e.g. Chart Mvt by A So in APEX4.2, how can the CHART's region title be changed dynamically ( without submitting the entire page ) to reflect the value from the drop down list P38_DESK ?
I've edited the XML on the Chart Attributes page but I don't find atrtributes to rotate the y-axis title (<text>TITLE</text>) nor the letters themselves in the title. What I'd like is something very close to
T I T L E
But what I get is a horizontal title rotated -90 degrees. I've looked at lots of Anychart documentation but don't find anything that seems to fit with the XML already given on the Chart Attributes page. I've seen the "rotate" attribute but I don't know where it would go and even then, I'm sure it only rotates the title as a unit and not the individual letters.
I just noticed on apex.oracle.com (4.2) that I couldn't find the region source for flash charts. I expected to find it under the Region Definition tab.
Has this moved or will it be included in a later release?
I have a requirement to view the PDF content in the apex page region, I am using Apex 3.2 and Oracle 10 Enterprise edition. I Uploaded the PDF file in the shared component under static file. Now i need to view the content of the PDF file. method to view the PDF content.
I saw the link in denes blog here he shows how the PDF is getting displayed. but there is no steps of methods mentioned
I would like to display the row number in the report region at the beginning of each row for each page (based on the number of rows to display per page).
So if the number of rows per page is 15, I would want to show each row from 1 to 15. When going to the next page (16 - 31) I would like to show row 1 to 15 again next to each row. And if the number of rows per page is 20, I want to see row numbers 1 to 20 on each page.
Since I believe an Update button only processes the current page, I would like to then use this row numbers (1 - 15) to get the values of the displayed column for each row to perform an insert to another table.
On package application "Customer Tracking", there is good example about Modal Page. Quite simple but it work quite nicely.The step to create this Modal Page:
- Create new region, set display point: After Header and use region template: Modal Region and set the Static ID (eg. ActivityModal) - Create the page item and put it on the above region (eyample: Name, Company etc.) - Create a button, set the action to "Redirect to URL" and enter the URL target to: javascript:openModal('ActivityModal');
Now when you click on the button, the modal page will be display.How can I pass a parameter to the modal page, example: I want to pass text 'Johnny' to the Name page item which is on the modal region.
I have select list which has null and other values. I have created a blank HTML region with the following text
Report for the year &P2_YEAR. and for geography &P2_GEOG.
Now P2_YEAR works fine because, it is always populated with a year. However, &P2_GEOG has 'All' as null value since we can see the report for all geographies. However, if the all option is selected, the above &P2_GEOG. shows as null. Since its not a PL/SQL proc, I cannot put in a NVL. I am guessing one possible way is to write a PL/SQL code before region and then check if its null and then try to populate a new hidden field and show, something like that. Wondering if there is a way to do it directly in the HTML region?
I have a form on a table which has a column indicating if the row is editable or not. When the form is displaying an existing row, the user would like the display attribute of all fields to be set to Display Only when the column indicates the row is not editable - otherwise the attributes should be set to Text, Number, Date, etc.
I'm presently creating a Graph on a repeating frame.
I made a query with a group that pointing to the repeating frame.
The problem : I want to change dynamically the Y and X axis Title.
The graph accept user parameter inside the XML file. But how to make it dynamically based on SQL query?
I try with formula, but can't make it work with a group. I have to put the formula at Report Level, but to make it dynamically for each group i have to make it work at the group Level.
I have a 2D pie chart. The chart takes the column names as label and shows the results(3) like passed--4, failed--3, on hold ---6. Now I want to have tooltip , if I point on passed--4, it should show "number of students passed last year"similarlyIf I point on failed--3, it should show "number of students failed last year"
i need a chart with 4 lines and 2 y axis. 2 lines on the first y axis, 2 lines on the other y axis.First i tried to create 4 series and "multiple y axis", then i get the first line at one y axis, and all the other lines at the second y axis.
After that i have seen that it is possible to return more than one value within one series, so i create 2 series with 2 values each - i thought that then i will get the first 2 values at one y axis and the other 2 lines of the second serie at the second y axis... but sadly it is not like i expected - i get the same result as with 4 series.is it really necessary to create a custom xml for that?
here is my example: [URL] as you can see the blue and the red line are on different axis.the query of one serie looks like that (it gives the values of a day and the day before), the queries are ok.
select null link, to_char(a.ts,'DD.MM HH24:MI') label, sum(a.kw*100/12) over ( partition by trunc(a.ts) order by a.ts rows between unbounded preceding and current row ) "KWh", sum(b.kw*100/12) over ( partition by trunc(b.ts) order by b.ts rows between
select null, '0-10' Days , count(*) from tableunionselect null, '11-20' Days, count(*) from tableunionselect null, '21-30' Days, count(*) from tableunionselect null, '>30' Days, count(*) from table
The 3d pie chart was showing the slices is the correct order 0-10, 11-20, 21-30, >30 but now shows it in random order. how to get the order by working. I suspect since the Days column in the select is a Character column this issue is occurring, however, with the restrictions in the number of select items we can have in the Apex charts, was wondering how do you get the order by working?
I am using the build-in flash Apex chart which I understand to be a subset of the Anychart.
I have the following problem, I have two series, which I am displaying in a 3D Bar Chart on a horizontal view with two Y-Axis. This works well, the problem is that each Y -Axis has a different scale. I am not setting the min or max value range for either of the y-axis as I do not know what this value range may be at the time of rendering the chart to the application user.
So as it turns out, the left y-axis has a value range from zero to 100 and the right y-axis has a value range from zero to 50 and the application users are finding this difficult and confusing as they are only looking at the bars represented in the chart and assuming that as the two bars, i.e. one form each series look similar in size, they have the same value and this can not be further from the true, as one y-axis is showing a value range twice as big as the other y-axis.
So my question is how do you customise the chart so that the value range on both y-axis is the same. i.e., the largest of the two?
I have created a few flash charts using APEX4.2. Is there a way for the user to view the chart and then email it as an inline image to someone? I know that the user can save the chart as PDF file, then send it as an attachment via Outlook ( or similar system), but can I integrate these manual steps to one ( template), similar to the IR report's download feature ?
I found the actual dates are mandatory, while the chart tolerates missing planned dates - which is a complete reversal of what actual project data would have.baseline project gantt with parent-child relationship
What I found though is if some planned dates are missing, the generated XML seems to default with data from previous rows.my red lines indicate missing from/to dates (actual data also shown underneath chart) URL.....
NAME TASK_ID ACTUAL_START ACTUAL_END PROGRESS DUE_START DUE_END line 1 1810794 07/MAR/2013 11/MAR/2013 100 26/MAR/2013 27/MAR/2013 00:00:00 line 2 1810780 12/MAR/2013 16/MAR/2013 100 23/MAR/2013 27/MAR/2013 00:00:00 line 3 1810779 17/MAR/2013 20/MAR/2013 line 4 1810773 21/MAR/2013 21/MAR/2013 50 24/MAR/2013 [code].....
My application build in Apex 4.1, Oracle 11gr2In my application, there are three pages:
Page1 (Dashboard): contains 6 different chart page60: Generate a chart based on a value passed from page1 Page14: Generate a report based on a the value passed from Page1 and Page60
I want to pass value "3" to page item P60_KPI_NO and P14_KPI_NO when click on first chart I want to pass value "4" to page item P60_KPI_NO and P14_KPI_NO when click on second chart.
why a Gantt chart would show only the first 15 rows of the query?! I validated id to be unique , parent_id properly pointing to the parent. When I artifically create another level, the chart still subborny shows only 15 rows. The actual query returns 1590 rows.
I tried to follow Pivot query using XML option in APEX
I can get the data into the xml serialized state, but how do I display the actual values in a region? See my example app below. I want the two far right columns in the Pivot XML region to duplicate what is in the original version.
I'm gonna create a Gantt chart on Oracle APEX and want to re-size, move the graph into other line..how to control the graph itself (just like javascript, ajax and anychart API...) URL.....
I'm trying to create a histogram based on time range using a bar chart. I made the query correctly and the bar chart displays the histogram.
However I want to make the axes labels on the x-axis go under the tick marks of the axis. Right now they are under the corresponding bar. This doesn't convey the notion of a range. For e.g. if I have 23 observations between 10 and 20 seconds, I need to show 10 on the left of the bar and 20 on the right. In other words the bar is between two tick marks. I want to show 10 under the left tick mark and 20 under the right tick mark.
How do I do this? I tried using the attributes of the label tag under x_axis in the chart xml, but couldn't get it to work.
The following query is used to generate a flash chart:
select null link 'Available' as "Available", to_number(max_licenses - consumed_licenses) from software_detail where capture_date = trim(GET_CAPTURE_DATE) and software_product = :p1 and software version = :p2 [code].....
But the 2d doughnut flash chart shows:
Available = 39 Consumed = 1
How is this possible?
Oracle 11.2.0.3 RAC on Windows 2008 R2 APEX 4.2.1.00.0 with Apex Listener 2.0 on Apache Tomcat 6.
Is there any way I could customize tooltip (when you go over the bar in the report, small box with the value appears).I would like to display different values there.
I have an application which contains a chart of type Dial.In order to set the major interval dynamically I have switched to using custom xml and replaced the #SCALE_DATA# with:
However, I would also like to label the value with a Units Label (e.g. '%'). I was previously doing this using the Value: Postfix setting under Axes Settings, but after switching to Custom Settings removes this box and I no longer get the units displayed.
Is there some xml I can add which will set and display the units.I am using Application Express 4.0.2.00.09
I am trying to do a Flash Chart in APEX 3.1. Is there a limitation on how many labels I can get horizontally. No matter what I do the number of labels I get horizontally is 15. We are trying to show the amount of days in a month.... Can I do that? If so how?
I am using org chart plugin to show the employee hierarchy, the plug-in is downloaded from
[URL]........
Current i uploaded the employee photo's in images under shared components -> files and referring in my query like below its working fine, but My question is how to refer employee photo's from table.
SELECT TO_CHAR (emp.empno) AS primary_key, TO_CHAR (emp.mgr) AS parent_key, emp.ename || '<div> <img width="100px" src="wwv_flow_file_mgr.get_file?p_security_group_id=' || :WORKSPACE_ID [code]...........
issue with my apex line chart. The scenario is as follows: have a table called revenue. revenues per year are saved in it. and revenues are generated from three sources which are also saved in the same table. I have made a line chart on it. works well.
Now I have to show that if the value of one of the sources had fallen, how must have it affected the total. I made a number field that takes an estimated change value, and build my sql query with it. it works but the problem is that it changes the non-affected source too. it must change the value of the affected source only and hence the total value.
bold or I will put it this way, how can I write a select statement for a chart series so that one of the rows value does not change and the other two change.
