provide SQL query (not PL/SQL block) for the following. I have data in table as shown below
Serial No value
========= ========
123
2-99
3-99
4-99
534
656
77
88
990
1065
1167
12-99
13-99
14-99
15-99
16-99
17-99
182
1945
206
The output of the SQL will be the largest consecutive series of the value -99 is 6 and total count of the value -99 is 9
I have a query that selects multiple series for a bar chart (I have defined only one chart series, and have 3 columns selected to represent 3 series). The series display on Bar Chart is fine. Now I want to create a separate link target depending on which series is clicked on the chart. I am not able to do this.
View 1 Replies View RelatedI want to print Fibonacci Series like :-
0,1,1,2,3,5,8,13,21,34..........
How can i do it.Can i do it by procedure or function?
i have a data something like
010030
110495
210960
311425
[code]...
and user enters the figure like 13025now i would like to find the closest next value to the number entered by user, which is 713285 .how can i get this result, i have search a lot on Internet and i found some analytic functions can work out. but don't know how ..
I need to find a query to create a gap in continuous series. So that i can fill this gap with a new record.
Attached here is the test sql.
Sample Data is
test@orcl>select * from sales_mst;
NO VDATE T
---------- --------- -
1245 07-JAN-13 N
1246 07-JAN-13 N
1247 07-JAN-13 R
1248 07-JAN-13 N
[code]...
10 rows selected.
test@orcl>select * from sales_dtl;
NO CODE QTY RATE
---------- ---------- ---------- ----------
1245 11 60 600
1246 12 55 450
1246 11 45 600
1247 13 50 250
1247 11 60 600
1248 11 45 600
1249 12 55 450
[code]...
16 rows selected.
Required Out Put
test@orcl>select * from sales_mst;
NO VDATE T
---------- --------- -
1245 07-JAN-13 N
1246 07-JAN-13 N
1247 07-JAN-13 R
1248 07-JAN-13 N
1251 08-JAN-13 N
1250 08-JAN-13 R
1253 08-JAN-13 N
1252 09-JAN-13 R
1254 09-JAN-13 N
1255 09-JAN-13 N
10 rows selected.
test@orcl>select * from sales_dtl;
NO CODE QTY RATE
---------- ---------- ---------- ----------
1245 11 60 600
1246 12 55 450
1246 11 45 600
1247 13 50 250
1247 11 60 600
1248 11 45 600
1251 12 55 450
1251 11 45 600
[code]...
16 rows selected.
Update or move only those records which have Type 'N'. I have tried the following query but it is giving me an error.
test@orcl>ALTER TABLE
sales_dtl
DISABLE CONSTRAINT
fk_sales_dtl_no;
test@orcl>update sales_mst set no=no+1 where type='N' and vdate > '07-JAN-13';
*
ERROR at line 1:
ORA-00001: unique constraint (TEST.PK_SALES_MST_NO) violated
In SQL plus
<SQL>
i need to repeat last six or seven commands instead of typeing
is there any command to using arrow keys o backward and forward last typing comamnds
i know / to execute last command
how to do that in SQL plus.
whether the overlapping Multiple series charts are possible in Oracle APEX or not .
I am trying to create two graphs for two data sets , one as marker and another as line , but its giving me issues such as
1) X axis is taking all the points of the first series suppose(
1,5,10,180) itsplotting these first . and its then starting labeling
the x-axis for another one which has values like
(20,50,100,1000,15000)
so my X-axis is now ---> 1,5,10,180, 20,50,100,10000,150000
In case i make my marker chart series as the 2nd sequence , then its drawing all the markers on the right side of the chart .
[URL].........
Workspace:- NR_WORKSPACE
Username:-user1
password:- H123$
whether this thing is achievable in oracle apex or not , is there any work around ?
issue with my apex line chart. The scenario is as follows: have a table called revenue. revenues per year are saved in it. and revenues are generated from three sources which are also saved in the same table. I have made a line chart on it. works well.
Now I have to show that if the value of one of the sources had fallen, how must have it affected the total. I made a number field that takes an estimated change value, and build my sql query with it. it works but the problem is that it changes the non-affected source too. it must change the value of the affected source only and hence the total value.
bold or I will put it this way, how can I write a select statement for a chart series so that one of the rows value does not change and the other two change.
I am using apex 4.1, i created a chart with 4 series in each series i am calculating sum of the no.of students joining in different classes of a institute for every year.
example my table is like this
date_of_join class student_id
'07/22/2012' 8 1
'07/22/2011' 8 2
'07/22/2009' 8 3
'07/22/2012' 7 4
'07/22/2010' 7 5
'07/22/2011' 6 6i wrote query like
series1
select null as link,UNISTR('�0A0') || to_char(date_of_join,'YYYY'),count(student_id) "class 8" from stdent_record where class=8 group by to_char(date_of_join,'YYYY') order by to_char(date_of_join,'YYYY')
series2
select null as link,UNISTR('�0A0') || to_char(date_of_join,'YYYY'),count(student_id) "class 7" from stdent_record where class=8 group by to_char(date_of_join,'YYYY') order by to_char(date_of_join,'YYYY')but what happened is the x-axis is coming in order like
2009 2011 2012 2010because the series1 no student is joined in 2010 so its taking the series1 order but i need the years in normal order.
Would like to know the execution series of an application(From a particular screen) through Oracle trace events.
View 1 Replies View RelatedI need to know if a customer appears at least 4 consecutive days. Here's an example of data
CLI_ID , DATE
-------------------------
123 , 2010/10/01
123 , 2010/10/04
123 , 2010/10/05
123 , 2010/10/06
123 , 2010/10/07
123 , 2010/10/08
123 , 2010/10/10
456 , 2010/10/01
456 , 2010/10/02
456 , 2010/10/03
456 , 2010/10/06
456 , 2010/10/07
456 , 2010/10/08
456 , 2010/10/11
In the example the client 123 appears from 2010/10/04 to 2010/10//08 (5 consecutive days), so this client must appear in the output. In the example customer 456 does not appear at least 4 consecutive days, so should not appear in the output.
I want to retrieve the data based on the count.
Sample data
AccountSubAccountDate
11.12-Mar-10
11.23-Mar-10
11.34-Mar-10
11.42-Mar-10
11.56-Mar-10
21.67-Mar-10
21.78-Mar-10
21.82-Mar-10
3210-Mar-10
32.111-Mar-10
32.22-Mar-10
32.313-Mar-10
32.414-Mar-10
32.52-Mar-10
42.616-Mar-10
42.717-Mar-10
What i want is I want the data which account is having more than 5 subaccounts within the last one month. Also need data with other date criteria like last 100 days if more than10 sub accounts. need single query.
Output is :
3210-Mar-10
32.111-Mar-10
32.22-Mar-10
32.313-Mar-10
32.414-Mar-10
32.52-Mar-10
Having more than 8lacks in my database. i wrote the query but it is taking much time and didnt give the data even after 14 hours.
My query is :
select * from table a where account in
(select account from table b where b.subaccount=a.subaccount
and b.date>=sysdate-35
group by b.account having count(b.subaccount)>5)
union
select * from table a where account in
(select account from table b where b.subaccount=a.subaccount
and b.date>=sysdate-100
group by b.account having count(b.subaccount)>10)
how to retrieve the Subaccounts which satisfies my requirements.
I need to know the counts(into buckets) for each event_date for a given event_id.
I have 4 buckets that I'm trying to calculate
1. Past (from Today)
2. Today
3. > Today but within 3 days in the future
4. More than 3 days in the future
WITH event_data AS
(SELECT '1' event_id, SYSDATE - 1 event_date
FROM dual
UNION ALL
SELECT '1' event_id, SYSDATE
FROM dual
[code]....
Sample Output:
EVENT_IDPASTTODAYWITHIN_3_DAY_WINDOWOUTSIDE_3_DAY_WINDOW
1 111 1
2 102 0
I have a table with three columns: terminal, place and batch. How can I check for missing batches?
select * from transactions;
terminal place batch
84812
84813
84814
84816
84821
84823
84824
84825
I have a table T with columns
Col1 Col2
1 A
2 B
3 C
4 D
[code]..
I want to do group ranking in desired col3 in such a way that it checks for different values across consecutive rows under col2 and assigns a number to each group. Just when two consecutive rows in col2 have same value then the group ends and the next group starts.
So my desired output is:
Col1 Col2 Col3
1 A 1
2 B 1
3 C 1
4 D 1
5 D 2
6 A 2
[code]...
Here you can see that the first four rows under col2 are unique i.e A,B,C,D so col3 assigns this as group number 1. It ends at row 4 becuase row 5 also has value D under column 2. So in other words, each group must have all unique values and there should not be any repetition. For example, see group 3 (under col3) in above desired output; it starts from row 9 and ends at row 11 because row 12 also has value 'C' and the value 'C' has already occurred in group 3 in row 9.
I want to achieve this SQL. I tried using Dense rank but couldn't go through. I want the shortest possible query to acheive this.
I am pulling information from a view to get the current results and placing them into a cursor which then inserts the results into a temp table.
Current Results:
JOB_NAMESCHEDULED_TIME STATUS
JOB_1 02/23/2010 13:25:00Failed
JOB_1 02/22/2010 13:25:00Failed
JOB_1 02/21/2010 13:25:00Failed
JOB_1 02/19/2010 13:25:00Failed
JOB_2 02/21/2010 13:25:00Failed
JOB_2 02/18/2010 13:25:00Failed
JOB_2 02/17/2010 13:25:00Error
JOB_2 02/15/2010 13:25:00Error
Needed Results:
JOB_NAMESCHEDULED_TIME STATUS
JOB_1 02/23/2010 13:25:00Failed
JOB_1 02/22/2010 13:25:00Failed
JOB_1 02/21/2010 13:25:00Failed
JOB_2 02/18/2010 13:25:00Failed
JOB_2 02/17/2010 13:25:00Error
I want to populate totale number of record in the file. Usually i get 10000 records per file and i load them using sql loader.I want to also insert the number of records in file while loading the data in table.
How can i achive it.
structure of control file is
load data
BADFILE '/backup/temp/rajesh/RIO/BadFiles/FILENAME'
append into table ERS_RIO_SRC
TRAILING NULLCOLS
(
INSTALLATION_ID CHAR
[code]...
data
V5_RIO_5K7C|78967|172.16.43.153|RioLoginSrc.asp|0.375|01/08/2012 07:44:44.623|01/08/2012 07:44:45.000|V5_RIO_5K7C||||||||||
V5_RIO_5K7C|78968|172.16.43.150|RioLoginSrc.asp|0.187|01/08/2012 08:22:32.813|01/08/2012 08:22:33.000|V5_RIO_5K7C||||||||||
[code]...
table structure
CREATE TABLE ERS_RIO_SRC
(
INSTALLATION_ID VARCHAR2(50 BYTE) NULL,
TRANSACTION_ID VARCHAR2(50 BYTE) NULL,
SERVER_ID VARCHAR2(50 BYTE) NULL,
CLINICAL_TRANSACTION_ID VARCHAR2(255 BYTE) NULL,
[code]...
Error@ ORA-24333 - Zero Iteration Count.
Here is the program,..for my report, Strangely I am able to run the query Successfully for my report in SQL developer and report builder and I can even give a bind parameters using both , but the requirement for this report is I should ether run this report in discoverer or xml For that I have successfully created a report in report builder and when I create a Concurrent Program and Run It,… I get an error ORA-24333 - Zero Iteration Count
=> with Tender As ( Select F1.Store_code as Store_Code, ……
With Tenders As ( Select F1.Store_code AS Store_code,
F2.Tender_type_code AS Tender_type_code,
Sum(F2.Payment_amount) As Trans_amount,
Count(F2.trx_id) as Trans_count
From ors_transactions F1
[code]....
i want to restrict the user if he/she enters any 3 consecutive sequence of numbers,characters,alphanumerics and special characters for example aaa, aAa, @@@, ---- , 111, 123 are not valid.
valid sequences are a1w,?1A,aa1,WW2,78a,-#a
i want to show the invalid sequence in a single query using regular expression function. suppose for example if user enters aaa,$$$,123 then the query output is aaa,$$$,123.
i have written two different queries for that but i want a single query
SELECT REGEXP_SUBSTR('EEE','([a-z])\1\1',1,1,'i') FROM DUAL;
SELECT REGEXP_SUBSTR('111','([0-9])\1\1',1,1,'i') FROM DUAL;
SELECT REGEXP_SUBSTR('@@@','([^-$])\1\1',1,1,'i') FROM DUAL; -it is not checking for -(hypen) characters
any 3 consecutive characters from key board.
SELECT * FROM table WHERE id = $x
$x being a range of non-consecutive values like so:
1,3,5-9,13,18,21 and so on...
I realize I can query using an array of operands and such, but these ranges will be in upwards of 100 or more items. I want to minimize the number of queries I have to do and the length of them. Is there any resource you can point me to that can optimize something like this?
SELECT DISTINCT a.emp_id, a.cal_id, TO_CHAR(a.ts_date, 'DD/MM/YYYY') tsdate, a.ts_date, 1 as days
FROM tmsh_timesheet a
INNER JOIN project b ON TO_CHAR(b.proj_id) = a.proj_id
INNER JOIN tmsh_ts_calendar c ON c.cal_id = a.cal_id
INNER JOIN (SELECT a.cal_id, a.emp_id, MAX(a.status) as status, a.create_dt, a.create_by FROM tmsh_stat_hist a
[Code]...
this query results
EMP_IDCAL_IDTSDATE
048283404/10/2010
048283502/11/2010
048283503/11/2010
048283504/11/2010
048283508/11/2010
i need the ts date to be in like this
04/10/2010
02/11/2010 - 04/11/2010
08/11/2010
create table test_table(
rn varchar2(10),
col1 varchar2(10),
col2 varchar2(10),
[code]...
I want update col1 whis is null to max(col1) ++ in a row, order by cr_date like
1,1,20110102
2,2,20110101
3,null,20110105 => 3,5,20110105 because this row is after 20110103
4,3,20110104
5,null,20110103 => 5,4,20110103 because this row is before 20110105
update test_table
set col1 = (select max(col1) from test_table) + rownum
where col1 is null;
this gives ora-00933
version : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
i want to ,remove consecutive occurance from string
Example I/P: 'POWELL POWELL BRIAN K AND BONNIE POWELL JARRELL JARRELL'
to O/P : 'POWELL BRIAN K AND BONNIE POWELL JARRELL'I tried the below code is Working fine , But i wanted to do this using Regexp or Some other Better Method
WITH T
[Code]....
I have 2 tables
Table 1Name Item DateJon Apples 06/11/2013 00:30:00 hrsSam OrangesNish Apples
Table 2 - Net countName Item CountNish Apples 10Nish Oranges 17Nish BananaSam Apples 10Sam Oranges 1Sam Bananas 1Jon Apples 8
I need to create a job that checks Table 1 for new records added after last run and then add the count in Table 2 accordingly.how to achieve this using PL/SQl or something similar
I have a problem with a query. I have a table employee with data as
emp_id date day working_ind
1 01-Jan-2011 Mon Y
1 02-Jan-2011 Tue Y
1 03-Jan-2011 Wed Y
1 04-Jan-2011 Thu Y
1 05-Jan-2011 Fri Y
1 06-Jan-2011 Sat N
1 07-Jan-2011 Sun N
1 09-Jan-2011 Tue Y
Sundays/ Monday/ any public holiday the working_ind will be N. If the emp is absent on one day then there will be no record entered in the table (e.g. 8th jan there is no record). Each table has only one year data.
I need to retrieve for all employees when they worked for 30 consecutive days without being absent which does not include sat/ Sunday / holidays.
Its like:
-- i need to order by emp_id and date
-- get oly the data with working_ind as Y
-- make sure that i get 30 consecutive days (from what ever i get above) where no days data is missing
I tried using lag and inner join but it does not seem to be working.
how to query a list to see if a person had events in consectutive months within the past year. We call a person a LongTermResident if they had a review in any two consectutive months within a reporting period. I wrote a function isResidentLongTerm, passing in FacilityID, ResidentID, ReportPeriodStart, and ReportPeriodStop and returning a 'Y' or 'N'. It works, but the performance is slow.
So if I have a list of reviewers, facilities, reviewees I want to select only those SNF/NF residents who have had routine reviews in any two consectutive months at the same facility.
This is my query:
select ConsultantID, ResidentID
from (
select distinct ConsultantID, FacilityID, ResidentID
from Reviews
where BedType = 17820 -- SNF/NF bed
and ReviewType = 17474 -- routine review
)
where isResidentLongTerm( FacilityID, ResidentID, :startDate, :stopDate ) = 'Y'
I have a table with numbers like this in a column
sr no. value
1 17
2 0
3 0
4 38
5 32
6 24
7 12
8 51
9 42
10 1
11 1
12 0
13 0
14 1
15 1
.
.
.
so on....
I want to find out consecutive non-increasing sequences of value (2nd column) order by sr. no (first column) in ascending order.
For example, in the 2nd column, 17 is followed by 0 and 0 and then 38 so it means 3 consecutive values (i.e starting from 17 are 0 and 0) are non-increasing and they are ranked by '1' in my desired in third column as shown below. similarly, the 2nd non-increasing sequence starts with 38,32,24 and 12 and this is ranked as '2' in the third column. same is the case with rank '3' for the third non increasing sequence. so bascially i want the third column with "ranks" starting and ending as per above logic. i tried using LEAD function but doesn't get what I want. I need the shortest possible query to get that third column since i have other columns in the original table in a multiple group by query.
my desired output is:
sr no. value Rank
1 17 1
2 0 1
3 0 1
4 38 2
5 32 2
6 24 2
7 12 2
8 51 3
9 42 3
10 1 3
11 1 3
12 0 3
13 0 3
14 1 4
15 1 4
.
.
.
how to count how many items present in a particular data block in oracle forms 10g.whether it is a text_item or display_item or list_item etc is there any method to do this.
i have written this when-button pressed but the problem is how to get the next item name in the block
DECLARE
V_COUNT NUMBER:=0;
V_FIRSTITEM VARCHAR2(100):='';
BEGIN
GO_BLOCK('BLOCK_ITEMCOUNT');
V_FIRSTITEM := GET_BLOCK_PROPERTY('BLOCK_ITEMCOUNT', FIRST_ITEM);
LOOP
[code]....
I have table T with 50,000 rows
create table T
(student_id number,
class_id number,
quiz_id number,
marks number)
some sample rows like
INSERT INTO T VALUES (1,1, 1, 50);
INSERT INTO T VALUES (2,2, 2, 40);
INSERT INTO T VALUES (3,1, 3, 34);
INSERT INTO T VALUES (1,1, 4, 10);
INSERT INTO T VALUES (1,1, 5, 30);
INSERT INTO T VALUES (1,1, 6, 29);
INSERT INTO T VALUES (3,2, 7, 34);
INSERT INTO T VALUES (3,2, 8, 33);
INSERT INTO T VALUES (3,2, 9, 56);
INSERT INTO T VALUES (1,1, 7, 90);
INSERT INTO T VALUES (2,2, 8, 0,);
INSERT INTO T VALUES (1,1, 8, 80);
INSERT INTO T VALUES (2,2, 8, 65);
INSERT INTO T VALUES (1,1, 9, 34);
INSERT INTO T VALUES (2,2, 9, 11);
each student belongs to one class_id. each student participates in many quizes. each quiz has its unique id. each student can appear once in a quiz_id
I am doing the below analysis and query:
1. with below query I am finding which student_id had most marks in any 3 successive quizes (see the 3-1 part below) in the query..
SELECT QUIZ_ID,
STUDENT_ID,
SUM (MARKS)
[Code]....
SQL> /
QUIZ_ID STUDENT_ID CONSECMARKS
---------- ---------- -----------
7 1 170
6 1 166
8 1 129
5 1 106
8 3 89
8 2 76
3 3 68
7 3 67
8 2 65
1 1 60
9 3 56
9 1 49
2 2 40
4 1 40
9 2 11
15 rows selected.
With above query, I can play around and find for any 'n' number of consecutive quizes, like marks in 2 consecutives quizes, 3, 4 and so on but for each 'n' value I've to run a seperate query mentioning (2-1) or (3-1) or (4-1) and so on..
since my table is big and there are about 400 quizes so what I want to find out is for each 'n' consecutive quiz (from 1 to 400) which student had most marks for each consecutie 'n' quiz. Like in 1 (consecutive) quiz which student had the highest marks and then 2 conseuctive quiz who had most marks and then in 3 consecutive quiz who had most marks and so on till 400 consecutive quiz who had most marks... rather than running query for each 'n' value seperately i want a single query that can give me a summary of most marks in each n consecutive quizes...
my sample output is:
Nth consecutive quiz student_id sum(marks)
1 1 90
2 1 170
3 1 246
4
.
.
.
100
.
.
200
.
.
300
.
400 ? ?
Is this possible to get the above output from one single query? If there are two or more students with equal most marks for any 'n' conseutive quizes then both should come in the summary.
I have a table (tblProject) with the following fields:
Project_ID, Project_Name, Update_Date
I need to look back over the last week to find out which of the projects stored in the above tables haven't been updated on consecutive days day.
For example i would expect to see:
14, Streamline, 01/08/2013
14, Streamline, 02/08/2013
14, Streamline, 03/08/2013
14, Streamline, 04/08/2013
14, Streamline, 05/08/2013
14, Streamline, 06/08/2013
14, Streamline, 07/08/2013
15, Bonus, 01/08/2013
15, Bonus, 03/08/2013
15, Bonus, 04/08/2013
15, Bonus, 05/08/2013
15, Bonus, 07/08/2013
The code should identify that the 'Bonus' project missed updates on 02/08/2013 and 06/08/2013. Should be a simple enough piece of code for an experienced developer i'm sure
