I want to populate totale number of record in the file. Usually i get 10000 records per file and i load them using sql loader.I want to also insert the number of records in file while loading the data in table.
How can i achive it.
structure of control file is
load data
BADFILE '/backup/temp/rajesh/RIO/BadFiles/FILENAME'
append into table ERS_RIO_SRC
TRAILING NULLCOLS
(
INSTALLATION_ID CHAR
I'm trying to load data into a table using SQL Loader but getting a failure error below.
Log File ========
SQL*Loader: Release 11.2.0.2.0 - Production on Wed Feb 6 23:54:25 2013 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. Control File: /opt/Infor/Outbound_Marketing/7.2.2/EM/metadata/trans.ldr Data File: /opt/Infor/Outbound_Marketing/7.2.2/EM/logs/trans.log Bad File: trans.bad Discard File: none specified [code]....
I have to load a fixed width file using sql loader utility. But the records have multiple special characters. writing / modifying the loader utility to load the data.
--Script to create the table create table t1 ( ip1 varchar2(2), ip2 number, ip3 number);
--loader utility LOAD DATA INFILE 'c:inputfile.dat' BADFILE 'c:adfile.bad' REPLACE INTO TABLE t1 FIELDS TERMINATED BY '' OPTIONALLY ENCLOSED BY '°' ( ip1POSITION(1:2) CHAR, ip2POSITION(3:17) INTEGER EXTERNAL ":ip2/100", ip3POSITION(18:32) INTEGER EXTERNAL ":ip3/100", )
--sql version i am using SQL*Loader: Release 9.2.0.1.0 - Production on Wed Mar 7 18:32:33 2012 Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
In the above mentioned data file, records has multiple special characters like '°','¶' ,'-'. All these special characters have some meaning. eg: '°' specifies the above column needs to be multiplied by -1 '¶' specifies the above column needs to be multiplied by -0.1
what changes need to be made in loader utility for the same? Also, will there be any change in the utility if I am using higher version of oracle?
Sl#Emp_noNameAddress 00101Tom1/B-XYZ street 00202Jon1/C-XYZ Street
Employee Datafile 001, 01, Tom, 1/B-XYZ street 002,02,Jon, 1/C-XYZ Street
Above is a sample data file. Now I would like to import the data into an Oracle table called employee using Oracle 9i SQL Loader utility. But the table has only 3 fields (Emp_no,Name & Address), so I would like to skip Sl# while loading data. I do not want to manually modify data file. How should I write .ctl file.
Sample .ctl file.
load data INFILE 'dataEmployee' BADFILE 'Employee.bad' DISCARDFILE 'Employee.dis' into table Employee fields terminated by ',' TRAILING NULLCOLS (Emp_no NULLIF Emp_no = BLANKS, Name NULLIF Name = BLANKS, Address NULLIF Address = BLANKS )
After exporting some data to excel, I noticed that on one row all the columns shifted over some. So I queried this record in the database and noticed that the ADDRESS field has some unknown characters at the end of it. They are little squares. I think they are TABS.
2630 LINDEN BLVD, APT. #8G(2 squares are in here)
ADDRESS_1 "TRIM(:ADDRESS_1)",
Besides trimming the data, is there some other function I can use to clean up the address further?
LOAD DATA INFILE "gateway.csv" truncate INTO TABLE GATEWAY Fields terminated by "," Optionally enclosed by '"' trailing nullcols
[code]....
and I got the following error:
zcyds891:/opt/oracle> sqlldr gwcem/gwcem@pfs control=gateway.ctl log=/tmp/ldr.log bad=/tmp/bad.log SQL*Loader: Release 9.2.0.8.0 - Production on Tue Dec 7 05:07:59 2010 Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved. SQL*Loader-350: Syntax error at line 12. Expecting "," or ")", found "INTERGER". GATEWAYPROTOCOL INTERGER, ^
Iam having the following query, After executing schema refresh using export & import , getting count of database objects comparison to be done,
-- SELECT 'TRUNCATE TABLE '||OWNER||'.'||TABLE_NAME||' ;' FROM DBA_TABLES WHERE OWNER='PRICING' order by TABLE_NAME; SQL> SELECT 'select count(*) from '||OWNER||'.'||TABLE_NAME||' ;' FROM DBA_TABLES WHERE OWNER='PRICING' order by TABLE_NAME;
The output expected was to display each table name in a schema following below with corresponding number of records to be displayed, but it wasn't showing correctly.
I installed oracle 10G complete so I can have everything. But now I cannot run sql loader. I check my oracle devsuitehome directory and I cannot find sqlldr.exe
I need to install sql loader separately? I can't find sql loader installer on web.
- 1 - M or P: indicates which table to insert: MASTER or PARENT; - 2 - M or A or B: indicates MASTER, PARENT_A, PARENT_B; - 3:18 - DATA.
Based on the values above, what I need to do is:
1. Load a line to MASTER_TABLE; 2. Load a line to PARENT_TABLE_A pointing to its relative line in MASTER_TABLE; 3. Load a line to PARENT_TABLE_B pointing to its relative line in MASTER_TABLE; 4. In the original file line, there is nothing I can use to join a MASTER line with a PARENT line.
The result would be: MASTER_ID PARENT_DATA 1 PARENT_TABLE_A1 1 PARENT_TABLE_B1 2 PARENT_TABLE_A2 2 PARENT_TABLE_B2
I tried to use both: SEQUENCE and Sequence.NextVall (CurrVal) but they only work when using ROWS=1 and the file I need to load has millions of rows, so I need direct path loading.Also, I read about External Table, but it does not suit my needs because the Application server is not the same as Database server, which is needed by external tables.
in this case is better load the data to a temporary table and then insert to the other tables, I found almost the same question in the topic pointed by the link below: URL....
I want to load geometry into a table using sql*loader. My datafile contains geometry defined as WKT URL...., a standard for geometry and also Oracle has a function called sdo_util.from_wktgeometry.If I'm using a separate 'insert into' statement using this function in sql*plus, there's no problem. But if I'm using the same function in my control-file for sql*loader import, I get a sql*loader-418 error: "bad datafile for column geometrie".
My data file contains records with RECORD_TYPE '01', '02', '03' and '04' in position (30:31) I use sql loader to load this data into a table. I need to load ONLY rows with RECORD_TYPE ='04'. I have to output all the other rows into a file, so I decided to use DISCARD file. Now, those with RECORD_TYPE ='4' have to be loaded into different columns depending on the value in position (267:268).
So, my ctl file should look something like:
WHEN (30:31) = '04' into table MYDATA WHEN (267:268) != 'O ' into table MYDATA WHEN (267:268) = 'O '
and whatever is not '04' goes to discard file.
I tried to use
into table MYDATA WHEN (30:31) = '04' and (267:268) != 'O ' into table MYDATA WHEN (30:31) = '04' and (267:268) = 'O '
but I don't get the right result in terms of the discard file.
Is there any way to put together all these conditions?
The SQL loader somehow is loading only first record. The data file is a csv and the end of line character is a new line. Some text fields have multiple new lines.
Here is my control file
load data infile '/home/devo/c0397105/RuleImport/testLoad/dummyLoad.csv' Truncate into table DUMMY_LOAD_TABLE fields terminated by "," optionally enclosed by '"' ( ID "to_number(:ID)",REQUESTED_GROUP,PURPOSE,COMMENTS) [code]........
We don't have Retail resource type as Dependent System now; the rule will be changed later when Dependent Systems can accept resource types other than application"
I am using sqlloader for loading the data into database by using csv file.My csv file is delimited by comma in that i am having a column which is having the , and line feeds targeted to load into a long data type.for example as below
descri,dfdfdfd,dfdfdf, sdfsdf, dfsdfd,
i want to move this column data into a single table column.But due to because of delimited "," it is splitting into number of columns
I had a requirement of loading flatfile into staging table using SQL Loader, One of the columns in the the Flat file is having values FALSE or TRUE and my requirement is that I load 0 for FALSE and 1 for TRUE which can be achieved by simple DECODE function...I did use decode and tried to load several times but did not work.
INFILE 'sql_4ODS.txt' BADFILE 'SQL_4ODS.badtxt' APPEND INTO TABLE members FIELDS TERMINATED BY "|"
[code]...
I did try putting a trim as well as SUBSTR but did not work....the cloumn just doent get any values in the output (just null or say free space)
I have a small problem when I am trying to load data into a table using SQL Loader. The data I am trying to load should be a number, but it is in the format '999,999,999 USD'. When I try to load the data, I am getting an invalid number error, due to the USD (I have already accounted for the thousands seperators). My question is, how can I load the data as a number with USD in the format?
LOAD DATA APPEND INTO TABLE IPGITLREDATA WHEN ITL_REC_TYPE = 'D' FIELDS TERMINATED BY ',' TRAILING NULLCOLS (
[code].....
The data file might have a value of " D " instead of "D" for ITL_REC_TYPE and ITL_REC_TYPE is in the WHEN clause. How can I check for the trimmed value of ITL_REC_TYPE in the WHEN clause ?
I have loaded 14324590 rows into target tables using sql*loader.I used below consideration during the load process.
1) direct=true,parllel=true 2) unrecoverable 3) disable all indexes and triggers.
But, sql loader takes 21 minutes to load 14324590 rows in database? tuning sql loader process? we cannot change data file because it has given by client.
from Control file, data is getting popupalated in TEST_USER and TEST_TITLE similarly if remove
INTO TABLE TEST_TITLE( TX_SID POSITION(1:3) CHAR, ID_TITLE "get_title_id(:TITLE_NAME)" ,
[code]...
from Control file, TEST_USER and TEST_ROLE is getting populated.
Here RD_ROLE_MASTER script
CREATE TABLE RD_ROLE_MASTER ( "ID_ROLE" NUMBER(38,0) NOT NULL ENABLE, "TX_ROLE_NAME" VARCHAR2(20 BYTE) NOT NULL ENABLE
[code]...
Here is RD_TITLE_MASTER script CREATE TABLE RD_TITLE_MASTER( "ID_TITLE" NUMBER(38,0) NOT NULL ENABLE, "TX_TITLE_NAME" VARCHAR2(25 BYTE) NOT NULL ENABLE);
Insert into RD_TITLE_MASTER (ID_TITLE,TX_TITLE_NAME) values (7,'RED_LOB_ESCALATION_L1'); what is the problem?
I Have one csv file.i want to load to a table trough sql*loader.but in table 3 column is there.but in the csv file some record hav one semicolumn in last filed like this
My requirement is to load the data from feed file into two tables based on the value of a column in feed file.
say column in feed file is "Activity_Value" . If the Activity_value is 10, the data from feed file should be loaded into Table A and If the Activity Value is 20 the data from feed file should be loaded into Table B.
