Data Guard :: ORA-24333 - Zero Iteration Count
Dec 4, 2008
Error@ ORA-24333 - Zero Iteration Count.
Here is the program,..for my report, Strangely I am able to run the query Successfully for my report in SQL developer and report builder and I can even give a bind parameters using both , but the requirement for this report is I should ether run this report in discoverer or xml For that I have successfully created a report in report builder and when I create a Concurrent Program and Run It,… I get an error ORA-24333 - Zero Iteration Count
=> with Tender As ( Select F1.Store_code as Store_Code, ……
With Tenders As ( Select F1.Store_code AS Store_code,
F2.Tender_type_code AS Tender_type_code,
Sum(F2.Payment_amount) As Trans_amount,
Count(F2.trx_id) as Trans_count
From ors_transactions F1
[code]....
View 2 Replies
ADVERTISEMENT
Aug 2, 2013
Get the following error from Oracle ORA-24333: zero iteration count Cause: An iteration count of zero was specified for the statementAction: Specify the number of times this statement must be executed on whether is this a Oracle bug or if not what should be set to avoid this failure.
View 2 Replies
View Related
Dec 27, 2010
I have one table as shown below,
CREATE TABLE MAT
(matrl varchar2(100),
date_man date,
weight number(10)
);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat1','12-DEC-10',100);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat2','13-DEC-10',200);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat3','21-DEC-10',300);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat4','26-DEC-10',400);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat5','22-DEC-10',500);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat6','02-DEC-10',600);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat7','23-DEC-10',700);
INSERT INTO MAT(Matrl,DATE_MAN,WEIGHT) VALUES ('mat8','07-DEC-10',800);
The data will look like this .
matrldate_manWeight
mat112-Dec-10100
mat213-Dec-10200
mat321-Dec-10300
mat426-Dec-10400
mat522-Dec-10500
mat602-Dec-10600
mat723-Dec-10700
mat807-Dec-10800
I need to order by this data in terms of date and need to get the data as shown below. Acc_wt is accumulated weight till the material.
Date Weightacc_wt
mat602-Dec-106000
mat807-Dec-10800600
mat112-Dec-101001400
mat213-Dec-102001500
mat321-Dec-103001700
mat522-Dec-105002000
mat723-Dec-107002500
mat426-Dec-104003200
Can we make use of oracle lag and lead functions here?Or some other methods?
View 6 Replies
View Related
Jul 27, 2011
i have inner query result like
Emp status
----- ----------
ram a
ram a
ram b
ram a
i want write a query to find a maximum occurrence of status and update in status column.
result should be
Emp status
----- ----------
ram a
ram a
ram a
ram a
i tried lot of thing but not to go.
View 2 Replies
View Related
Jul 5, 2011
We have physical data guard configured version (10.2.0.4). We are in need to upgrade primary & standby database to 11G R2. Can we perform rolling upgrade.
View 3 Replies
View Related
Oct 17, 2012
Controlling User Access to Tables in a Logical Standby Database can be controlled using the following command:
ALTER DATABASE GUARD STANDBY;
My simple question is: how can I know the current active Guard setting in the standby database?
Oracle 11g R2.
View 1 Replies
View Related
Jan 16, 2013
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
View 1 Replies
View Related
Nov 5, 2010
I want to change dbname,sid,data/control file locations in operational dataguard setup i plan to follow as below
1)shutdown primary and standby (stop managed recovery)
2)change db name in init.ora of primary and standby change database name control file location
3)create control file for primary from trace(script) make changes for db name and file locations
4)mount and open primary database
5)create standby control file
6) transfer standby control file to standby
7) mount stand by database and start manage recovery
If this steps will error free do i need to follow any thing additional to this or what is other best way for this or its not possible at all
View 1 Replies
View Related
Feb 24, 2013
Oracle Version: 11.1.0.7.0
Active Dataguard
Statspack has been configured for Active Dataguard on Primary database.We got an spike of Buffer busy waits for about 5 min in Active Dataguard, this was causing worse Application SQL's response time during this 5 min window.Below is what i got from statspack report for one hour
Snapshot Snap Id Snap Time Sessions Curs/Sess Comment
~~~~~~~~ ---------- ------------------ -------- --------- -------------------
Begin Snap: 18611 21-Feb-13 22:00:02 236 2.2
End Snap: 18613 21-Feb-13 23:00:02 237 2.1
Elapsed: 60.00 (mins)
[code]...
Why there could sudden spike of demand on UNDO data in Active Data Guard ?
View 2 Replies
View Related
Mar 29, 2011
I am working in a bank as an system consultant, i have a SAN Storage Area and oracle as below.
SAN 1
This interface includes the DATA FILES of the oracle tablespace
SAN 2
SAN1 Mirrors the DATA FILES of the oracle tablespace to SAN 2
1. Can i rely on real time data recovery from SAN2 ?
2. if SAN1 (Data Files are currupted) will the SAN2 Data Files will be currupted as well.
3. If the SAN2 is currupted then what Oracle Features can be used to have uncurrupted data.
View 5 Replies
View Related
Jul 23, 2010
i did everything writen but when i do *SQL>alter database recover managed standby database disconnect from session;*
i go and look in the standby database AlertLog file ,and thats whats writen
*ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'F:ORACLEPRODUCT10.2.0ORADATADBSYSTEM01.DBF'
ORA-27041: unable to open file
OSD-04002: غير قادر على فتح الملف
O/S-Error: (OS 3) The system cannot find the path specified.
[code]....
strange thing that it realises the primary database in drive F and it goes to it but i dont understand what could be the reason of this ,although im doing this command while primary database is shutdown!
View 2 Replies
View Related
May 2, 2012
I configure logical standby online .when I execute dbms_logstdby.buid,first
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
it was blcoked by other sesson,then i kill the holding session,but no work.then i cancel this step and execute it again . the error is
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
BEGIN DBMS_LOGSTDBY.BUILD; END;
*
ERROR at line 1:
ORA-01354: Supplemental log data must be added to run this command
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3669
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3755
ORA-06512: at "SYS.DBMS_LOGMNR_D", line 12
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_INTERNAL_LOGSTDBY", line 370
ORA-06512: at "SYS.DBMS_LOGSTDBY", line 157
[code]....
View 3 Replies
View Related
Jun 15, 2012
I have set up a cross platform (Microsoft Windows IA (32-bit) -> Linux x86 64-bit) data guard and it worked fine.Then I did a switch over (which again worked) and found out the data is not getting replicated at all.. checked the data files available from the new primary database and found out they are in the windows format as below..
SQL> select name from v$datafile;
NAME
--------------------------------------------------------------------------------
D:ORACLEAPPADMINISTRATORORADATAMFSSYSTEM01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSSYSAUX01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUNDOTBS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSUSERS01.DBF
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
and physically they were created at '/home/app/oracle/product/11.2.0/db_1/dbs/' and as
D:ORACLEAPPADMINISTRATORORADATAMFSREDO02.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSREDO03.LOG
D:ORACLEAPPADMINISTRATORORADATAMFSRMANRMAN_TS01.DBF
View 5 Replies
View Related
Jan 16, 2013
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
View 31 Replies
View Related
Oct 21, 2012
Our organization has recently decided to go for storage metro cluster solution for disaster recovery. In a Data guard environment, we normally calculate how much archive log is generating and based on that value we calculate the required bandwidth.
For storage metro cluster, we need to find how much block is changing in our primary database, and the same rate of change would apply on DR cluster. Now, i need to give the assumption how much changing is happening in my system. How to calculate the change.
View 4 Replies
View Related
Apr 2, 2010
I want to retrieve the data based on the count.
Sample data
AccountSubAccountDate
11.12-Mar-10
11.23-Mar-10
11.34-Mar-10
11.42-Mar-10
11.56-Mar-10
21.67-Mar-10
21.78-Mar-10
21.82-Mar-10
3210-Mar-10
32.111-Mar-10
32.22-Mar-10
32.313-Mar-10
32.414-Mar-10
32.52-Mar-10
42.616-Mar-10
42.717-Mar-10
What i want is I want the data which account is having more than 5 subaccounts within the last one month. Also need data with other date criteria like last 100 days if more than10 sub accounts. need single query.
Output is :
3210-Mar-10
32.111-Mar-10
32.22-Mar-10
32.313-Mar-10
32.414-Mar-10
32.52-Mar-10
Having more than 8lacks in my database. i wrote the query but it is taking much time and didnt give the data even after 14 hours.
My query is :
select * from table a where account in
(select account from table b where b.subaccount=a.subaccount
and b.date>=sysdate-35
group by b.account having count(b.subaccount)>5)
union
select * from table a where account in
(select account from table b where b.subaccount=a.subaccount
and b.date>=sysdate-100
group by b.account having count(b.subaccount)>10)
how to retrieve the Subaccounts which satisfies my requirements.
View 33 Replies
View Related
Nov 15, 2010
I need to know the counts(into buckets) for each event_date for a given event_id.
I have 4 buckets that I'm trying to calculate
1. Past (from Today)
2. Today
3. > Today but within 3 days in the future
4. More than 3 days in the future
WITH event_data AS
(SELECT '1' event_id, SYSDATE - 1 event_date
FROM dual
UNION ALL
SELECT '1' event_id, SYSDATE
FROM dual
[code]....
Sample Output:
EVENT_IDPASTTODAYWITHIN_3_DAY_WINDOWOUTSIDE_3_DAY_WINDOW
1 111 1
2 102 0
View 3 Replies
View Related
Oct 23, 2011
provide SQL query (not PL/SQL block) for the following. I have data in table as shown below
Serial No value
========= ========
123
2-99
3-99
4-99
534
656
77
88
990
1065
1167
12-99
13-99
14-99
15-99
16-99
17-99
182
1945
206
The output of the SQL will be the largest consecutive series of the value -99 is 6 and total count of the value -99 is 9
View 21 Replies
View Related
Aug 3, 2012
I want to populate totale number of record in the file. Usually i get 10000 records per file and i load them using sql loader.I want to also insert the number of records in file while loading the data in table.
How can i achive it.
structure of control file is
load data
BADFILE '/backup/temp/rajesh/RIO/BadFiles/FILENAME'
append into table ERS_RIO_SRC
TRAILING NULLCOLS
(
INSTALLATION_ID CHAR
[code]...
data
V5_RIO_5K7C|78967|172.16.43.153|RioLoginSrc.asp|0.375|01/08/2012 07:44:44.623|01/08/2012 07:44:45.000|V5_RIO_5K7C||||||||||
V5_RIO_5K7C|78968|172.16.43.150|RioLoginSrc.asp|0.187|01/08/2012 08:22:32.813|01/08/2012 08:22:33.000|V5_RIO_5K7C||||||||||
[code]...
table structure
CREATE TABLE ERS_RIO_SRC
(
INSTALLATION_ID VARCHAR2(50 BYTE) NULL,
TRANSACTION_ID VARCHAR2(50 BYTE) NULL,
SERVER_ID VARCHAR2(50 BYTE) NULL,
CLINICAL_TRANSACTION_ID VARCHAR2(255 BYTE) NULL,
[code]...
View 4 Replies
View Related
Nov 6, 2013
I have 2 tables
Table 1Name Item DateJon Apples 06/11/2013 00:30:00 hrsSam OrangesNish Apples
Table 2 - Net countName Item CountNish Apples 10Nish Oranges 17Nish BananaSam Apples 10Sam Oranges 1Sam Bananas 1Jon Apples 8
I need to create a job that checks Table 1 for new records added after last run and then add the count in Table 2 accordingly.how to achieve this using PL/SQl or something similar
View 2 Replies
View Related
May 13, 2011
i'm using a mixture of Oracle� Data Guard Concepts and Administration11g Release 1 (11.1) And Bulletin : MAA - Creating a RAC Physical Standby for a RAC Primary 10g ( on oracle support) But neither is comprehensive for what i'm trying to do.
setting up Data Guard Broker on a RAC Data Guard environment?
View 1 Replies
View Related
Aug 20, 2011
how to count how many items present in a particular data block in oracle forms 10g.whether it is a text_item or display_item or list_item etc is there any method to do this.
i have written this when-button pressed but the problem is how to get the next item name in the block
DECLARE
V_COUNT NUMBER:=0;
V_FIRSTITEM VARCHAR2(100):='';
BEGIN
GO_BLOCK('BLOCK_ITEMCOUNT');
V_FIRSTITEM := GET_BLOCK_PROPERTY('BLOCK_ITEMCOUNT', FIRST_ITEM);
LOOP
[code]....
View 3 Replies
View Related
Jan 7, 2011
I am very new to data guard...I have a primary and a physical standby database...If the primary got crashed, are the users directly switched to physical standyby (is it automated) or the DBA has to manually do the fail over or switch over....is it the same concept as in RAC like TAF....How can the DBA know that the users are disconnected from the database.....explain with some steps...
the version is 10.2.0...
View 2 Replies
View Related
Feb 16, 2012
Log shipping stopped logging/shipping into the Standby Database in one of our Oracle Data Guard Servers about two month ago and there was no change carried out as at that time. The Data Guard has only one Standby database. I have been managing the log shipping and recovery manually.
View 1 Replies
View Related
Apr 5, 2010
I want to implement data guard on same PC.
View 1 Replies
View Related
Sep 25, 2012
I did upgrade from 10.2.0.1 to 10.2.0.4 on the secondary database , the primary database version is 10.2.0.4,i took cold backup from the primary to the secondary database , when i try to create control file on the secondary , i am getting this ORA-01130: database file version 10.2.0.3.0 incompatiable with ORACLE version 10.2.0.1.0.*
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
View 2 Replies
View Related
Jan 5, 2011
I'm trying to prepare data guard operation on the virtual machines.
1. I have install Oracle database without start up database on the standby server.
2. I try to connect this db by sysdba, but failed!
Quote:
C:>sqlplus "/as sysdba"
SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:SQL*Plus: Release 11.1.0.6.0 - Production on Wed Jan 5 20:03:33 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
Enter user-name:
I'm using instruction below: [URL]
Why I can't login to database?
View 7 Replies
View Related
Sep 22, 2010
I have to implement Physical standby using same SID. parameters required to set on Primary and standby. Also what entries are required to do in TNS file. Recently we have faced hardware failure.
View 10 Replies
View Related
May 29, 2011
how to check dataguard synchronization?
View 2 Replies
View Related
Mar 6, 2012
I am working on Data Guard concepts. I have configured Data Guard which is working fine.
Now I am trying to work on script which can give me output on OS prompt if there are any archive gaps..
I tried to use few commands on a script archgap.sh as
archgap.sh
sqlplus "/ as sysdba"
select * from v$archive_gap;
I am trying to run above script on OS prompt as
ABC:/home/oracle>sh archgap.sh
but I am not getting output ... I want it a way that this script should run within interval of 5 min and give output on OS prompt.
View 2 Replies
View Related
