Data Guard :: Changing Dbname / Sid / Data / Control File Locations?
Nov 5, 2010
I want to change dbname,sid,data/control file locations in operational dataguard setup i plan to follow as below
1)shutdown primary and standby (stop managed recovery)
2)change db name in init.ora of primary and standby change database name control file location
3)create control file for primary from trace(script) make changes for db name and file locations
4)mount and open primary database
5)create standby control file
6) transfer standby control file to standby
7) mount stand by database and start manage recovery
If this steps will error free do i need to follow any thing additional to this or what is other best way for this or its not possible at all
View 1 Replies
Jan 26, 2012
I have an oracle autoback of controlfile and spfile. I am trying to restore the production database using this backup, into a new server with a different directory structure.
I have completed the following steps in the restore process.
1. Creating a pfile from spfile
2. Changing the the location of cdump, udump, bdump and the control files ( there are three )
3. Then creating a spfile from this pfile
I am stuck on the next step where to rename all the datafiles and tempfile and restore the database. Following is what I did.
After mounting the database in RMAN, tried to run the following.
RMAN> run
2> {
3> allocate channel c1 device type disk
4> ;
5> @/home/oracle/rman_scripts/newloc.rman
6> SET NEWNAME FOR DATAFILE 1 TO '/u02/oradata/dorian/system01.dbf';
7> SET NEWNAME FOR DATAFILE 2 TO '/u02/oradata/dorian/undotbs01.dbf';
8> SET NEWNAME FOR DATAFILE 3 TO '/u02/oradata/dorian/sysaux01.dbf';
9> SET NEWNAME FOR DATAFILE 4 TO '/u02/oradata/dorian/users01.dbf';
[code]....
I am getting the following error message.
Starting restore at 25-JAN-2012 21:26:48
released channel: c1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 01/25/2012 21:26:49
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 30
RMAN-06100: no channel to restore a backup or copy of datafile 29
RMAN-06100: no channel to restore a backup or copy of datafile 28
[code]....
View 14 Replies
View Related
Jul 23, 2010
i did everything writen but when i do *SQL>alter database recover managed standby database disconnect from session;*
i go and look in the standby database AlertLog file ,and thats whats writen
*ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: 'F:ORACLEPRODUCT10.2.0ORADATADBSYSTEM01.DBF'
ORA-27041: unable to open file
OSD-04002: غير قادر على فتح الملف
O/S-Error: (OS 3) The system cannot find the path specified.
[code]....
strange thing that it realises the primary database in drive F and it goes to it but i dont understand what could be the reason of this ,although im doing this command while primary database is shutdown!
View 2 Replies
View Related
Aug 29, 2013
I have to load data file into a table. And the requirement is as below:
Input Data:
1234|20130815|20130822|This is a test, this is the the part
3456|20130823|20130809|This is a test
3456|20130823|20130809|This is a test
3456|20130823|20130809|This is a test
3456|20130823|20130809|Siva 1234
The data should be inserted only in two rows as below:
When Value in first 3 fields is same, 4th field should be appended to the existing value in table.
1234|20130815|20130822|This is a test, this is the the part
3456|20130823|20130809|This is a testThis is a testThis is a testSiva 1234
View 3 Replies
View Related
Apr 8, 2010
I am using perl script to dynamically generate the control file.If I have data in the control file as well as in the datafile, how would i write the control file in that case. Is the below one correct?
load data
INFILE '*'
INFILE '/export/home/test/test.csv'
INSERT INTO TABLE EMP fields
terminated by "," optionally enclosed by '"'
trailing nullcols
( empno, empname, sal, deptno )
[code]....
Is there any way that if my control file contains half of the data and my data file contains the other half of the data can i club this data into a logical record in the control file to populate the DB?
My exact 2nd requirement is, my DB contains 5 cols and for 1 col the data is common(countryName) which i have to pass to the control file dynamically and the .csv file contains the data for the other four cols. How could i combine these in the ctrl file and populate the DB?
so if the DB contains CountryName, empid, ename, sal and dept..I will get the CountryName to the ctrl file and csv contains the data for empid, ename, sal and dept. How would i combine these data into a logical record and populate the DB?
View 12 Replies
View Related
Aug 16, 2011
I have a table revenue
create table revenue
(
person varchar2(23),
month varchar2(3),
rev_amt number
)
and i have data in a file like below
Person Jan Feb Mar Apr Mai Jun Jul Aug Sep Oct Nov Dez
--------------------------------------------------------
Schnyder,345,223,122,345,324,244,123,123,345,121,345,197
Weber,234,234,123,457,456,287,234,123,678,656,341,567
Keller,596,276,347,134,743,545,216,456,124,753,346,456
Meyer,987,345,645,567,834,567,789,234,678,973,456,125
Holzer,509,154,876,347,146,788,174,986,568,246,324,987
Müller,456,125,678,235,878,237,567,237,788,237,324,778
Binggeli,487,347,458,347,235,864,689,235,764,964,624,347
Stoller,596,237,976,876,346,567,126,879,125,568,124,753
Marty,094,234,235,763,054,567,237,457,325,753,577,346
Studer,784,567,235,753,124,575,864,235,753,864,634,678
i want to load it into the table in the following way.
Person Month Revenue
-------------------------
Schnyder Jan 345
Schnyder Feb 223
Schnyder Mar 122
Schnyder Apr 345
Schnyder Mai 324
Schnyder Jun 244
Schnyder Jul 123
Schnyder Aug 123
Schnyder Sep 345
Schnyder Oct 121
Schnyder Nov 345
Schnyder Dez 197
........ ... ...
How to write control file to load this data into the above revenue table.
View 2 Replies
View Related
Aug 19, 2012
[oracle@RSASPGERP02 ~]$ cd /
[oracle@RSASPGERP02 ~]$ . .bash_profile
[oracle@RSASPGERP02 ~]$ sqlplus / as sysdba
sql*plus:Release 10.2.0.4.0 - production
Error:
ORA-09925:Unable to create audit trail file
[code]....
its standby archieving problem ,the problem appears when try to connect directly or through telenet and we try to login directly using oracle user we receving following message and login fail, "GDM could not write to your authorization file,this could mean that you are out of disk space or that your home directory could not be opened for writting"
View 14 Replies
View Related
Jan 16, 2013
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated)))
VERSION INFORMATION:
TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
[code]....
View 1 Replies
View Related
May 2, 2012
I configure logical standby online .when I execute dbms_logstdby.buid,first
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
it was blcoked by other sesson,then i kill the holding session,but no work.then i cancel this step and execute it again . the error is
SQL> EXECUTE DBMS_LOGSTDBY.BUILD;
BEGIN DBMS_LOGSTDBY.BUILD; END;
*
ERROR at line 1:
ORA-01354: Supplemental log data must be added to run this command
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3669
ORA-06512: at "SYS.DBMS_LOGMNR_INTERNAL", line 3755
ORA-06512: at "SYS.DBMS_LOGMNR_D", line 12
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_INTERNAL_LOGSTDBY", line 370
ORA-06512: at "SYS.DBMS_LOGSTDBY", line 157
[code]....
View 3 Replies
View Related
Jan 16, 2013
I configured dataguard in my local system.
1) scn differs wrt primary in standby (i checked, 1day difference), how to make scn same?
2)i created a table in primary, its not refelecting in standby, (below i ve pasted alertlog entries)
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Errors in file d:oracle11gappadministratordiag
dbmsstandstand racestand_dbw0_6916.trc:
ORA-01157: cannot identify/lock data file 2 - see DBWR trace file
ORA-01110: data file 2: 'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSAUX01.DBF'
[code]....
3)wen i try to open standby database in read only mode gives below error..
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1:
'D:ORACLE11GAPPADMINISTRATORORADATASTANDSYSTEM01.DBF'
View 31 Replies
View Related
