We have a table with timestamp column and having millions of records.We want to create a materialized view or query, which can give count based
-on some group by columns from table and -group by on condition (if count > 1000) and -group by on condition (if timestamp range for that group is > 1hr)
i create form on which 3 window, 3 Canvas, 3 blocks are there.
1)first block contain 3 items from_date and to_date(nondatabase)and find button
2)second block contains 3 items segment1, quantity and payment_terms
when i enter 2 dates and click on find button 2nd window open. segment1 and quantity between this 2 dates comes from base table like
select segment1,quantity from po_lines_all pll, mtl_system_items mts where pll.ITEM_ID=mts.INVENTORY_ITEM_ID and creation_date between :FROM_DATE and :TO_DATE
and payment_terms should enter manually
3)2nd block contains summary button when i click on it, it save segment1, quantity, payment_terms and open new window which contain segment1 ,qty, payment_terms and when i click on summary button data comes from custom table which group clause means
suppose
item qty terms a 2 2days a 3 2days b 3 3days
then on third form i shows like this a 5 2days b 3 3days
i done all this things but problem is that
suppose once data between 21-aug-2010 and 24-aug-2010 comes on second form , i enter payment_terms and save it. sumaary form also run properly but if another user enter date between 22-aug-2010 and 30-aug-2010 then it will shows data between 21-aug-2010 to 24-aug-2010 from custom table i.e with payment terms as earlier it save and from 25-aug-2010 to 30-aug-2010 it shows data from base table
like
item qty terms date a 2 2days 21aug a 3 2days 22aug b 3 3days 24aug b 4 NULL(ENTER MANUALLY) 26aug c 5 NULL 27aug
Reg. Area Age <=19 20 <= Age <= 24 25 <=Age <= 29 Total No. of Voters xxxx 10 15 7 32 yyyy 5 7 3 15
I have work out a script but the age is not in a range
select * FROM (select rgs_id_reg_area, count(decode(fbd_age,19,fbd_age)) Age19, count(decode(fbd_age,20,fbd_age)) Age20 FROM rubyvoterstat where vote ='Y' GROUP by rgs_id_reg_area) order by rgs_id_reg_area
I would like to inquire how do I code my select statement if my user enter a search date range(search startDt: 01/08/2012 and search endDt :30/09/2012) and I will like to retrieve only the 7records out from my table as shown below ?
I have a table which contains two columns containing the range of some products. These range are alphanumeric and i want to calculate the count of this range by a query. .
test case: CREATE TABLE MARRIAGE_FILE_NAME ( START_SERIAL_NO VARCHAR2(10 BYTE) NOT NULL, END_SERIAL_NO VARCHAR2(10 BYTE) NOT NULL, CATCODE VARCHAR2(10 BYTE) NOT NULL,
This data needs to be represented in a SQL report as below. The Date Range in the below i.e., Starts with FEB, by checking against the sysdate.. That is from sysdate it will display the Quarter data for 4 months as below.
Currently I am using a procedural logic to populate data into a different table in the above format. Is there any method to do with a single SQL using PIVOT. Below given is the table structure and Insert scripts.
I want my user to be restricted for entering duplicate time within two times.
create table asd(dt_frm date,dt_to date);
insert into asd VALUES(to_date('01-04-2012 08:00','dd-mm-yyyy hh24:mi'),to_date('01-04-2012 10:00','dd-mm-yyyy hh24:mi')); insert into asd VALUES(to_date('01-04-2012 09:00','dd-mm-yyyy hh24:mi'),to_date('01-04-2012 11:00','dd-mm-yyyy hh24:mi'));
now in the second insertion I want to alert the entry user that 9am already falls in the saved record which is 8am to 10am and so that this record can't be saved.
Other than the obvious to me, where interval partitioning creates partitions as needed. Is there any performance benefit from using interval partitions vs date range partitions.
One draw back for me is that developers do access the partition name in some of their queries, so if I use date range partitioning this will not break their code. I could not find a way to assign a name to a partition when using intervals, is this always system generated or can this be over-ridden.
I am running Oracle 11.1.0.7 soon to be running on 11.2.0.0
I require to find the years between any given date range. For example what are the years between the dates '01/12/2010' and '01/02/2012'? Answer must be '2010,2011,2012'. how to code the query for this result?
Our term (strm) is dictated by the term_begin_dt and term_end_dt dates but I want to keep selecting that term until 1 week before the next term opens and then switch to that term.
Basically, I don't want any gaps between a term.
Output:
select strm when sysdate is between term_begin_dt and term_end_dt (strm would equal 3943) select strm until 1 week before the start of the next term (4027) (strm would equal 3943) select strm when 1 week before term_begin_dt (strm would equal 4027)
Repeat for the next term and so on 12/16/2011 select strm from term where trunc(sysdate) between trunc(term_begin_dt) and trunc(term_end_dt)
Output: 3943 12/17/2011 - 01/01/2012
select strm from term where ?
Output: 3943
01/02/2012 - 5/4/2012 select strm from term where ?
Output: 4027
Repeat.
Test Case:
CREATE TABLE TERM ( STRM VARCHAR2(4 BYTE), DESCR VARCHAR2(20 BYTE), TERM_BEGIN_DT DATE, TERM_END_DT DATE )
Insert into TERM (STRM, DESCR, TERM_BEGIN_DT, TERM_END_DT) Values ('3943', '2011 Fall Semester', TO_DATE('08/22/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/16/2011 00:00:00', 'MM/DD/YYYY HH24:MI:SS')); Insert into TERM [code].....
I am trying to replace a date range in a query. Don't understand why it's not working, below is the dummy query for the same:
/* v_Employee:= 'select emp_name from employee_table where Join_Year=~Replace1~ and Release_Month <=~Replace2~'; v_Replace1:=2013; v_Replace2:=7; pos := 1; WHILE (INSTR(v_Employee, '~', 1, pos) <> 0) LOOP IF (pos = 1) THEN
[code]....
Since actual code is like CLOB type, so I have not provided the same. Here after executing this query i found that v_Employee query is getting replaced by v_Replace1 at both of his position i.e "select emp_name from employee_table where Join_Year=2013 and Release_Month <=2013"
But my actual result should: "select emp_name from employee_table where Join_Year=2013 and Release_Month <=7"
I'm trying to compare a date and time within a certain range.
If the sysdate date/time range falls within the range of the values within the database tables then show a "Yes", otherwise, show a "No". The date works but the time doesn't seem to work. Maybe you can't use a "between" operator for time?
I have a table which has 2 range partitions on a date column currently.
CREATE TABLE TABLEA ( RUN_TIME INT NOT NULL ) PARTITION BY RANGE (RUN_TIME) ( PARTITION DATAONE VALUES LESS THAN (20110101000000) TABLESPACE SPACE1 PARTITION DATATWO VALUES LESS THAN (MAXVALUE) TABLESPACE SPACE2 );
I am planning to drop one partition i.e DATAONE. So table will have one partition left for MAXVALUE. Does it make sense to have a partition with MAXVALUE? Isn't it same as TABLEA in terms of number of records? TABLEA is also in tablespace SPACE2. Should i remove partition DATATWO also? If i have to what is the best way to move all DATATWO records to base table TABLEA?
I'm trying to run a script that will sum column values from a table using only a certain period of time in example below only January submissions. However, some of those rows have the same date and I want to have the latest time row of that day in the count.
I want to select a specific date/time range in a query. I want to select from 6 AM yesterday through 6 AM today. I know that CURRENT_DATE - 1 will give me yesterday, and I can search between that and the current_date. However, how do I incorporate the specific time in the query?
select to_date('30-DEC-00','DD-MON-YYYY') from dual
Error starting at line 1 in command:
select to_date('30-DEC-00','DD-MON-YYYY') from dual
Error report:
SQL Error: ORA-01841: (full) year must be between -4713 and +9999, and not be 0 01841. 00000 - "(full) year must be between -4713 and +9999, and not be 0"
*Cause: Illegal year entered *Action: Input year in the specified range
Is it possible within a CASE statement to put conditions on the date range that I want to pull? IE: am versus pm. The query has to pull specific time ranges for an AM run versus a PM run. ..... FROM table WHERE CASE WHEN TO_CHAR(SYSDATE,'AM') = 'AM' THEN table.date BETWEEN TRUNC(SYSDATE) AND SYSDATE ELSE table.date BETWEEN TRUNC(SYSDATE+12/24) AND SYSDATE
BANNER -------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production PL/SQL Release 11.2.0.1.0 - Production CORE 11.2.0.1.0 Production TNS for 32-bit Windows: Version 11.2.0.1.0 - Production NLSRTL Version 11.2.0.1.0 - ProductionSET DEFINE OFF; [code]....
10 rows selected.I want the output like as follows, all those missing date i need to carry on the last one's number
The date value I have created for this sample is monthly, based on the condition the data value I may need to generate weekly also. That's Monthly or weekly either one.
insert into call values(1,9818764535,9899875643,'IN','24-APR-13 02:10:43',10); insert into call values(1,9818764535,9898324234,'IN','24-APR-13 05:06:78',10); insert into call values(1,9818764535,9215468734,'IN','24-APR-13 15:06:78',10); insert into call values(1,9818764535,9899875643,'OUT','25-APR-13 01:06:78',10); insert into call values(1,9899875643,9899875643,,'OUT','25-APR-13 22:06:78',10);
Query : need to find first and last call of '9818764535' mobile number and of call_date between '24-apr-13' and '25-apr-13';
Find the date difference. I need to find that how many days the task is pending, if ACT_NAME field switching from 'SET PENDING%' to 'RESUME PENDING%' by using ACTIONTAKENDATETEXT field in the History table.
Example as needed: NoPendingDays = 23 (8+15)
I have attached Create table and Insert table values sample as SQL file.