PL/SQL :: Calculate Business Hours Between Two Dates Within A Cursor
Jul 24, 2013
I need a similar function to determinate difference between two dates, but i need other business hours; Monday - Friday: 9:00 - 21:00 (this is OK)Saturday: 09:00 - 14:00 (and this is my problem, how to add this condition in this function)
format of dtActivityStartDate/dtActivityFinishDate: 2010-09-17 14:50:51.150 Note: Both dtActivityStartDate/dtActivityFinishDate vcActivityName = Process Request usdFuncTimeCalc (vcActivityName,dtActivityStartDate, dtActivityFinishDate)
i need to calculate time elasped for that type of activity following are the rules:
(If Process Request is the activity) Working Days: Monday through Saturday Hours of Operation: 9AM 5PM
only working hours of day need to the counted like for example if it is sep 15 11 Am is dtActivityStartDate & Sep 17 is dtActivityFinishDate is 10 Am. then time elapsed is 11am to 5pm on sep 15 , 9 to 5 on sep 16 & 9 to 10 on sep 17 so total should be
6+ 8 + 1 = 15 hours + minutes. format of date time: 2010-09-17 14:50:51.150 vcActivityName = Process Request Don't worry about process request..
I have a query that uses a function to find the business days between two dates.It sums the total number of days between two dates per employee to find the total days for the past 30, 90, or 365 days.
The problem is that the query takes 21 second to return the last 30 days.Over 70 second to return the last 90 days and over 140 second to return the last 365 days.Do you know how I could tune the query to return faster? Below is the query for the last 30 days:
select dwt_emp_id, SUM((SELECT GET_BDAYS(DWT_DATE,DWT_CREATE_DATE) FROM DUAL)) from dwt_dvt_work_time where dwt_create_date > sysdate - 30 and dwt_hours > 4 and dwt_usr_uid_created_by <> -1 group by dwt_emp_id order by dwt_emp_id
Here's the function: CREATE FUNCTION get_bdays (d1 IN DATE, d2 IN DATE) RETURN NUMBER IS total_days NUMBER(11,2); holiday_days NUMBER(11,2); [code]....
EMP_IDENAME Date Min Hrs 10013Javed Iqbal09/20/2011 00:00:0036.007.00 10013Javed Iqbal09/21/2011 00:00:0027.007.00 10013Javed Iqbal09/22/2011 00:00:0049.007.00 10013Javed Iqbal09/23/2011 00:00:000.000.00 10013Javed Iqbal09/24/2011 00:00:000.000.00
i need the TOtal sum of Minutes and Hrs e.g 7+7+7=21 and also minutes but if minutes total increase from 60 minutes then it should add to hrs .how to get sum.
here I need to exclude the Dates which comes on 'saturday' and 'sunday' and also the common holiday..Here it is '01-May-2012' and I need the output like the following,
create or replace function getDate(p_joing_date Date,p_sysdate) Return Date; IS v_compltd_mnths; BEGIN SELECT into v_compltd_mnths MONTHS_BETWEEN(TO_DATE('sysdate','MM-DD-YYYY'), TO_DATE('joing_date','MM-DD-YYYY') ) "Months"FROM DUAL; return v_compltd_mnths; END;
how to caluclate days between two dates of single timestamp filed and with this
query Select * from m_activity_transaction where actn_opp_id in ( Select actn_opp_id from m_activity_transaction where ACTN_ACTV_ID = 218 Group by actn_opp_id
[code]...
and i nedd to caluclate no.of days between two dates like 27-JAN-12 11.06.20.000000 AM and 08-FEB-12 05.32.54.000000 PM where actn_id is unique AND ACTN_OPP_ID IS NOT UNIQUE.
I want Oracle stored function/procedure to calculate number of working days between two dates. We need to exclude Firdays and Saturdays as there are weekend holidays and also exclude official holidasy that lie between two dates.
I have to procedure that computes number of project, and average working hours of employees where employee id is passed as a parameter to the procedure. If the average working hours is less than 10 then employee's salary remain the same, otherwise check if number of project is less than 4 then 5% of salary, else 10% of salary is added to the salary.
I need to calculate first business day of a given month . Below is complete explanation
Business day=sould not include weekends and holidays.
In a table say ACTIVITY_XX I have all the month begin dates say 01-JAN-2010,01-FEB-2010,01-MAR-2010,01-APR-2010 and so on..and I have a HOLIDAY table where all the holidays are stored.
So using the above info I need to calculate the first business day for a given month. I guess this cannot be done by using a simple SQL query? I was wondering how could it be written using a PL/SQL function.
I'll be passing the month begin date as parameter..so the function should return the first business day for that month.
We need some transformation rules on Source employee table which comes from SAP and want to load in Target table.Basic idea is we need to calculate time when position was not held by sub owner so . . . Etc
I want to find the dates which have a date plus with in 2 days after this date. I mean group by 3 days each even the date i missing between two days. Actualy I want to find the start date where the employ was missing on job.
Basic concept is employes have allowed to use 10 personal leaves of a year. Each leave can be use for maximum 3 days.
If employ did not come on the job for one day or two days or three days, it shoul be count as ONE personal leave. And If employ is missing at job for four or five days, it should be count as 2 personal leaves.
After finding these days I want to select the starting date of 5th personal leave. (which is 16.01.10).
I am not a expert of using SQL, but I think it could be possible with using partitioning a table on the givin reslult and further partition the reslut on rownum() as rn and the using case statement where rn = 5.
Split a date into new dates according to black out dates!
Here is my tables:
CREATE TABLE travel ( start_date, end_date ) AS SELECT DATE '0000-01-01', DATE '9999-12-31' FROM DUAL;
[code]....
I have lets say a "travel date" and black out dates. I will split the travel date into pieces according to the black out dates.
Note: Travel Date can be between 0000-01-01 - 9999 12 31
Sample:
Travel Date:
Travel | START DATE | END DATE T | 2011 01 04 | 2011 12 11
Black Out Dates:
BO | START DATE | END DATE A | 2010 11 01 | 2011 02 11 B | 2011 01 20 | 2011 02 15 C | 2011 03 13 | 2011 04 10 D | 2011 03 20 | 2011 06 29
Excepted Result:
New Travel | START DATE | END DATE X1 | 2011 02 16 | 2011 03 12 X2 | 2011 06 30 | 2011 12 11
Visually:
Travel Date : -----[--------------------------]--
A : --[------]------------------------- B : ------[---]------------------------ C : --------------[---]---------------- D : ----------------[------]-----------
Travel Date : -[--------------------------------]--
BO Date A : ----[------]------------------------- BO Date B : -------------------------[---]------- BO Date C : ----------------[---]---------------- BO Date D : ------------------[------]-----------
Result X1 : -[-]------------------------------- Result X2 : -----------[--]-------------------- Result X3 : -----------------------------[--]--
I have been asked to see why a sister company cannot access multiple business areas through a single responsibility. At present, if they log in through a GL responsibility they can see all GL folders, items and the returned data. If they then go to the AP business area, they can see the folders and items, but when they run a report they get an error message 'Query returned no data' - but if they run the same query using an AP responsibility they get the correct results. I have looked at their user set up, and it seems fine i.e. has access to all business areas and required priveledges.
How can I select all of the dates between two dates? For example, given the start date 12/2/2003 and the end date 12/5/2003 I want to return:
12/2/2003 12/3/2003 12/4/2003 12/5/2003
Is there a built in function for this? Is there a way for a function to return multiple rows? It has to be a function because I need to use it within other SQL statements.
and want to check if there is an event in my EVENTS table that occurs in the same dd/mm/yyyy as the input, and can disturb the input event times. means:
input.event_start_time is between EVENTS.event_date and EVENTS.event_end_date and input.event_end_time is between EVENTS.event_date and EVENTS.event_end_date
but to compare only the hours here! (HH24:MI) because the date (dd/mm/yyyy) is checked before..
I don't know how to cut only the hours out of the date and compare them, and don't know how to write the whole function.
Here you can see that we have data for 27th Dec 2010 02,07,09 and 12 hours. I want a query which will show the full 24 hours data even if it doenst have any records. like the following,
i am using one query but not getting correct minutes.
here is my query:
v_Interval:= to_timestamp(v_temphrs,'HH24:MI:SS')-to_timestamp(v_outpunch1,'HH24:MI:SS'); v_TotalHrsMin1 := extract(hour from v_interval) * 60 + extract(minute from v_interval);
here v_interval datatype is "interval day to second" and v_temphrs datatype is varchar2 and value is : 12:00:00 and v_outpunch1 datatype is varchar2 and value is: 06:10:00 and v_totalHrsMin1 datatype is number.
here i should get value 370. but i am getting value 350.
I am using the below sql query to calculate working hours. The problem which i am facing is that query is taking lot of time to calculate the working hours. reduce the execution time of this query or if there is any other way to calculate working hours
The following query take 63.499 sec
SELECT sql_calc_found_rows gstime, MAX(stoptime) AS mx, MIN(starttime) AS mn,