ORA-01422: exact fetch returns more than requested number of rows.
I receive this error because i tried to introduce the below coding in a post query of the block.
begin
select supplier_cd into :fin_ex_rev_head.vendor_code
from fin_ex_rev_receipts
where receipt_date
between :keyblock.receipt_date
[code].....
I have perform a failover and encounters the following problem.
ORA-01422: exact fetch returns more than requested number of rows
initially primary db: chicago
physical standby db: boston
after failover
primary db:boston
physical standby: NA
after recreating physical standby
primary db:boston
physical standby: chicago
over at chicago (new standby)
log_archive_dest_3=E:chicago_arc
over at boston (new primary)
log_archive_dest_3=E:oston_arc
over at boston when I connect to both boston as target db and recovery catalog
RMAN> list archivelog like 'E:CHICAGO_ARC\%';
List of Archived Log Copies
Key Thrd Seq S Low Time Name
------- ---- ------- - --------- ----
252690 1 10 A 22-AUG-11 E:CHICAGO_ARC10_759842424_1.ARC
over at chicago when I connect to both chicago as target db and recovery catalog
RMAN> list archivelog like 'E:CHICAGO_ARC\%';
List of Archived Log Copies
Key Thrd Seq S Low Time Name
------- ---- ------- - --------- ----
252690 1 10 A 22-AUG-11 E:CHICAGO_ARC10_759842424_1.ARC
however at E:chicago_arc when I do a os check
C:Documents and SettingsAdministrator>dir /w E:chicago_arc
Volume in drive E is New Volume
Volume Serial Number is C874-DD6D
Directory of E:chicago_arc
[.] [..] 100_759410562_1.ARC
101_759410562_1.ARC 102_759410562_1.ARC 103_759410562_1.ARC
[Code]....
26 File(s) 9,077,989 bytes
2 Dir(s) 2,650,337,280 bytes free
there's more files than indicated by rman
also at both chicago and boston
I have the following error:
RMAN> debug on;
RMAN-03036: Debugging set to level=9, types=ALL
RMAN> report obsolete;
RMAN-06524: RMAN retention policy will be applied to the command
RMAN-06511: RMAN retention policy is set to redundancy 1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 08/24/2011 23:12:15
RMAN-06004: ORACLE error from recovery catalog database: ORA-01422: exact fetch returns more than requested number of rows
RMAN> debug off;
Debugging turned off
here's the trace files I logged
DBGRCVMAN: EXITING listBackup with exception: ORA-01422: exact fetch returns more than requested number of rows
DBGMISC: krmicomp: error 6004 signalled during compilation [23:12:15.358]
DBGMISC: ENTERED krmkmrsr [23:12:15.358]
[Code]...
How should I resolve this issue?
In Report it is possible to set the maximum rows to fetch to be a number e.g. 1+.Is it possible to use a number that is selected from another query? When I try to do this i.e. I put in the field num_lines or :num_lines I just get invalid number
View 10 Replies View Related I am trying to do a simple query where I need to return the rows from a table and treat each rown according to some rules.The query works fine, and returns all the rows, usually I have 2 rows returned. WHen I add to the query where ROWNUM = 1, I get the first row returned, but when I use when ROWNUM =2 OR ROWNUM >1, I always get null rows retured, even if I have rows in the database. Here is my query:
SELECT on_time
INTO on_time2
FROM work.work_unit
WHERE work_code = 1
AND emp_no = :entry_blk.p_emp_no
AND work_date = :entry_blk.p_work_date
WHERE ROWNUM = 2;
--RETURN NULL
I changed it to the following format, but still I get the same results, only I get data when I say when rownum = 1, i get back the first record in the query
SELECT on_time
INTO on_time2
FROM (SELECT on_time
FROM work.work_unit
WHERE work_code = 1
AND emp_no = :entry_blk.p_emp_no
AND work_date = :entry_blk.p_work_date)
WHERE ROWNUM = 2;
I can't move forward in my form until I figure out why this is not returning records
I have a form (StaffDetail) with three different blcoks. One of them is an Application Assignment block which consists of nothing but Assignment Type, Staff (Name), Last Updated By and Last Updated Date.. The Assignment Type and Staff has LOVs assigned to them individually.. Assignment type lets me pick all different types except for Project Manager. As soon as I select this option, i get the following error :
FRM-40735: WHEN-VALIDATE-ITEM trigger raised unhandled exception...
This does not even let me select any other Assignment type, then i have to go close all sessions and come back into the same screen.
Also, this form was first created and tested on the development environment and later moved to QA environment. All selections work in the development environment.. I checked for the roles in QA for individual Users..
FRM-40501: ORACLE error: unable to reserve record for update or delete.
ORA-24374: define not done before fetch or execute and fetch
My master-detail form has single canvas. For both blocks, master and detail, two tables joined together in each. One table to be updated, second table has some info for reference (query only).
I am getting these errors when in detail block the item from LOV is selected for existing record. This does not happen for new record inserted in detail block.
select rl.org_rollup_skey from (select fc.org_skey as "FC_ORG_SKEY" from IA.HIST_FCT_FCST_SLS fc
inner join IA.DIM_ORG do
on fc.org_skey = do.org_skey
where do.org_nam IN ('101', '485','486')) p
INNER JOIN IA.DIM_ORG_HIER h
ON p.fc_org_skey = h.desc_org_skey
inner join IA.FCT_FCST_SLS_ORG_ROLLUP rl
on h.GPRNT_ORG_SKEY = rl.org_rollup_skey
Above join is taking is running forever even as subquery
(select fc.org_skey as "FC_ORG_SKEY" from IA.HIST_FCT_FCST_SLS fc
inner join IA.DIM_ORG do
on fc.org_skey = do.org_skey
where do.org_nam IN ('101', '485','486'))
returns no rows and this subquery give result in 10 seconds according to me Full query should not take more tha 20 secs.
in 10g report builder i have written this query
----------------------------------------------------
SELECT DISTINCT(A.TRANS_NUM)
, A.POST_CD
, A.TRANS_DT
, A.EFF_DT
, A.TRANS_TYPE
, ( SELECT DES FROM SMT_CODE_LIST WHERE CD = A.TRANS_TYPE) DTRANS_TYPE
, A.TIME_STAMP
[code]....
this query returns multiple row. how to get distinct row.
OS : widows 2003
Oracle 9i release 2
I need to Fetch 1 lakh rows from table (all rows) in fastest way.
How to do it?
I need to read a huge number of rows, say in lakhs and then need to populate it in data block. Since it is having huge data am never able to run the form. it hangs after some time. when i test with few rows it is working. so no problem in coding.
View 4 Replies View Relatedi want to load all rows of single columns into one variable. After that, that variable will use in any side of the pl sql block.
SET serveroutput ON
DECLARE
CURSOR CUR_DATA
IS
SELECT DAS_SECURITY_CODE FROM SECURITY_TYPE WHERE ASSET_TYPE='DERIVATIVES';
rec_data CUR_DATA%rowtype;
[Code]....
how to resolve this. above query,variable holds last value which fetched from cursor.
Our application servers will be running a SELECT which returns zero rows all the time.This SELECT is put into a package and this package will be called by application servers very frequently which is causing unnecessary CPU.
Original query and plan
SQL> SELECT SEGMENT_JOB_ID, SEGMENT_SET_JOB_ID, SEGMENT_ID, TARGET_VERSION
FROM AIMUSER.SEGMENT_JOBS
WHERE SEGMENT_JOB_ID NOT IN
(SELECT SEGMENT_JOB_ID
FROM AIMUSER.SEGMENT_JOBS) 2 3 4 5 ;
[code]....
Which option will be better or do we have other options?They need to pass the column's with zero rows to a ref cursor.
Lets say I have a table in ORACLE database like:
ACC_ID | ACC_AMT
111 | 10000
111 | 12000
111 | 14000
222 | 25000
222 | 30000
333 | 18000
333 | 27000
333 | 13000
333 | 15000
I want to get the output as:
ACC_ID_1 | ACC_AMT_1 | ACC_ID_2 | ACC_AMT_2 | ACC_ID_3 | ACC_AMT_3
111 | 10000 | 222 | 25000 | 333 | 18000
111 | 12000 | 222 | 30000 | 333 | 27000
111 | 14000 | null | null | 333 | 13000
null | null | null | null | 333 | 15000
I need each different ACC_ID with ACC_AMT in different columns. The table may have other different ACC_ID also, but I will fetch only what I need. What is the best way to do this?
So far I have tried this:
SELECT
(CASE WHEN ACC_ID=111 THEN ACC_ID END) AS ACC_ID_1,
(CASE WHEN ACC_ID=111 THEN ACC_AMT END) AS ACC_AMT_1,
(CASE WHEN ACC_ID=222 THEN ACC_ID END) AS ACC_ID_2,
(CASE WHEN ACC_ID=222 THEN ACC_AMT END) AS ACC_AMT_2,
(CASE WHEN ACC_ID=333 THEN ACC_ID END) AS ACC_ID_3,
(CASE WHEN ACC_ID=333 THEN ACC_AMT END) AS ACC_AMT_3
FROM <TABLE_NAME>
But I am not getting the desired result.
There are several stages for sql processing in 10g2 database concept document.The following stages are necessary for each type of statement processing:
■ Stage 1: Create a Cursor
■ Stage 2: Parse the Statement
■ Stage 5: Bind Any Variables
■ Stage 7: Run the Statement
■ Stage 9: Close the Cursor
Optionally, you can include another stage:
■ Stage 6: Parallelize the Statement
Queries (SELECTs) require several additional stages, as shown in Figure 241:
■ Stage 3: Describe Results of a Query
■ Stage 4: Define Output of a Query
■ Stage 8: Fetch Rows of a Query
Stage 3: Describe Results of a Query The describe stage is necessary only if the characteristics of a query's result are not known; for example, when a query is entered interactively by a user. In this case, the describe stage determines the characteristics (datatypes, lengths, and names) of a query's result.
Stage 4: Define Output of a Query In the define stage for queries, you specify the location, size, and datatype of variables defined to receive each fetched value. These variables are called define variables. Oracle performs datatype conversion if necessary.
I still don't understand what's Stage 3: Describe Results of a Query and Stage 4: Define Output of a Query.
How to fetch all the rows in a cursor in local variables(host variables) in PRO C . /*For x in cur is not working....*/
View 2 Replies View RelatedI'm looking to create a STORED PROCEDURE to do the following per v1...but I seem to misunderstanding some ORACLE concept(s) as when called in a PLSQL window I'm getting an ORA-01422 message when using the V2 syntax.
Ideally I want this code called from VB, but for the moment I'm trying to get it to work when called from the PLSQL Developer toolkit. Am I trying the wrong concept? per previous posts my background is MSSQL, but I've used Oracle SQL from approx 2 years (at a SQL level) only.
v1
create procedure myabc
as
begin
SELECT custNAME
FROM MYCUSTOMER
[code]....
i want to download form 6i and report 6i for window 7 64bit. from where i can download it. i can't find exact location from google.
View 6 Replies View RelatedI have a query that is pulling back more rows when I use the dblink than when I hit the linked database directly.
For example:
select
x,y,z
from
mytable@dblink
returns 788,324 rows
while
select
x,y,z
from
mytable
returns 712,102 rows
It's the exact same query, with the only difference being the dblink. It's not pulling the data into a cursor or array, it's a simple, straightforward query on a remote database.
I would like a pl/sql function that returns the check digit of a 9-digit number?
Look at
[UR]......
For example number 109409714 (9 digits) should do check digit. I want validation of check digit, & want to return the check digit.
create or replace PROCEDURE newprocedur(outname OUT VARCHAR2,outroll OUT NUMBER) AS
CURSOR c1 IS
select Name,Rollno,Section from emp;
BEGIN
Open c1;
fetch c1 into outname,outroll;
Here out of 3 columns in cursor is it possible to fetch only two columns using FETCH like i did above?
how can I select whole table in parts of 100 rows?
If I have primary key I can:
CODEstart=0;
end=100;
select * from table where ID>=start_point and ID<end;
start=end;
end=end+100;
and repeat:
CODEselect * from table where ID>=start_point and ID<end;
How can I do it without primary key? Is there another posibility to getting 100 number of rows? Maybe using rowid?
i have a table displaying location, cost, inner_num and rownum ordered by the descending order of the cost.
the question is: display locations of the highest 10 costs. if the cost of 11th row is the same as 11th, then display 11 rows.
In sql plus How do I get the number of distinct rows of a certain value?
for example
select group_number from records group by group_number
How would I query for the total number of group_numbers in this query?
is there a way to find out how many rows a View has? Something similar to NUM_ROWS with regular tables perhaps? Or do I have to use Count(*)?
View 4 Replies View RelatedI have a column COL1 in table TAB1 which is varchar2. I want select only rows which has number and not alphanumeric value? I don't want to use regexp for this since
View 11 Replies View RelatedI need to load 2 trillion data from an external table to Oracle Heap table. I am using Direct Path insert for that. how to commit after inserting n number of rows.
View 8 Replies View RelatedCan we select table's rows of 5 to 15, like
select * from emp
where rowid <=5;
It is through an error when i used the below method.
select * from emp
where rowid >=5 and rowid <=15;
I have a table ABC with two columns NAME and SEQUENCE. The valid values of sequence are from 1..50. The table may not have all the Sequence number. For example following is the data in my table..
Quote:NAME SEQUENCE
------------------------
Jonh| 5
Amy| 1
Suresh| 3
I need a SQL to get the data like
Quote:NAME SEQUENCE
------------------------
Amy| 1
| 2
Suresh| 3
| 4
Jonh | 5
|6
|7
..
..
..
|50
Basically I want to have rows for the sequence numbers which are not present i my table. I thought of using the following query to generate a sequence and then join, but does not work.
select rownum from dual connect by rownum <=50
I tried something like
with temp as (select name, sequence from abc where supp_ref_order is not null order by sequence )
select rownum as num, temp.name from dual, temp connect by rownum <=50 where temp.sequence =num
To count the number of rows to the below table entries with certain conditions
my table
col1(varchar2(4000)) col2(varchar2(10))
3-1808116101 3-Standard
3-1808312141 3-Standard
3-1808312061 3-Standard
3-1807714441 2-Significant
3-1808284201 2-Significant
3-1808278361 2-Significant
3-1808284111 3-Standard
3-1807714261 3-Standard
3-1807128371 3-Standard
3-1807128351 3-Standard
3-1808301721 2-Significant
3-1808301701 3-Standard
3-1808322501 2-Significant
where conditions:
1)need to take the count of rows(col1).where col2 value is 3 or 2 .
2)value 3 or 2 is extracted and conditioned in the query
This is what I've been trying to do.
I have the following table:
FOOTBALL PLAYERS < ID, NAME, ATTRIBUTE>
100-JIM-TALL
101-BOB-STRONG
102-MARK-SMART
...etc
I want to form a query that regardless of the total returned records, I will be able to specify how many of each "kind" of players I want returned. There are several good reasons that it has to be one query and not many.
