create or replace PROCEDURE newprocedur(outname OUT VARCHAR2,outroll OUT NUMBER) AS
CURSOR c1 IS
select Name,Rollno,Section from emp;
BEGIN
Open c1;
fetch c1 into outname,outroll;
Here out of 3 columns in cursor is it possible to fetch only two columns using FETCH like i did above?
FRM-40501: ORACLE error: unable to reserve record for update or delete.
ORA-24374: define not done before fetch or execute and fetch
My master-detail form has single canvas. For both blocks, master and detail, two tables joined together in each. One table to be updated, second table has some info for reference (query only).
I am getting these errors when in detail block the item from LOV is selected for existing record. This does not happen for new record inserted in detail block.
when i run this code i get a invalid number error
create or replace
PROCEDURE BULK_REJECT(System_name VARCHAR2)
as
MDM_run_id VARCHAR2(14);
V_sql clob;
cursor Job_metric is
select rowid_job,system_name, table_display_name, run_status
[code]....
I want to fetch the data through the cursor and cursor is getting the value of group_code through the variable 'a'. but when i am writing the code like this it is not coming.
My code is like this :
declare
a varchar2(400):='';
cursor c1 is select ref_no,ref_code,company_id from stock_detail where company_id=:global.company_id
[Code]....
I have the following piece of
CREATE OR REPLACE PROCEDURE COMP_RECORDS
IS
l_query VARCHAR2 (10000) := '';
CURSOR TBL1
IS
SELECT TABLE_NAME, COLUMN_NAME FROM COLS_TO_COMP WHERE TABLE_NAME='ACE_HIST';
TBL1_REC APP.COLS_TO_COMP%rowtype;
[Code]..
However I am getting an ORA-00923 exception with message as "FROM keyword not found where expected". know if I can/cannot use a cursor to fetch column names for a table?
I'm currently facing a non-critical situacion while trying to update a table. Here's the PL/SQL Code. It's a pretty straight-forward script, It just update one single column of the table. The only problem is that I have to update over 15 milions records. When I use the for update cursor, I put inside the loop a counter, when it reaches 1000 records, then commit, else keep counting.
The block throws the exception ORA-01002: fetch out of sequence.
I've tried to do some reserch on Google, buy it only says it is an out of secuence fetch caused by a commit inside a for update cursor.
My question is. Is there any risk by putting the commit under the end loop, I mean by doing this I'd be updating over 15.000.000 records at the same time. Will I have any issue with the rollback segment ?
Here's the code as along with the Create Table and Insert statements.
CREATE TABLE TEST_1
(
TEST_ID NUMBER PRIMARY KEY,
IS_LOCKED NUMBER NOT NULL
);
INSERT INTO TEST_1
(TEST_ID, IS_LOCKED)
VALUES
(1, 0);
[Code]....
I need to open an explicit cursor for making a total: after I have to use the same information of that explicit cursor for dividing a column of the cursor by that total. It is not enough to open close, reopen and reclose because I just obtain one register at the same time and it is the same register two times consecutively.
I don't want to use auxiliary structures cause there are 18000 columns for 10200 rows.
FOR i IN 300..300 --18000
LOOP
y:=ymax-ysize*(i+0.5);
[Code]......
i have a proc that is taking p_serial_number refsursor as in parameter. the structure of p_serial_number is required to be
mfg_prod_cdchar (3 byte)
mfg_prod_seq_no char (6 byte)
How do I need to define this ref cursor ? and when I use it in my Procedure how do I fetch the column values ?
i HAVE THE FOLLOWING CODE WRITTEN IN A *.pc FILE. I am trying to loop to fetch data from cursor. But the code exist after it fetches the first record. Let me know what is it the right way to fetch data from cursor?
EXEC SQL BEGIN DECLARE SECTION;
char str[64];
EXEC SQL END DECLARE SECTION;
/*cursor declarations*/
EXEC SQL DECLARE Get_SQLText_Cursor CURSOR FOR
[Code]....
there are 3 columns as Address1(max data length 80) , Address2(max data length 80), Address3 (max data length 80)..I need to fetch all the three address line with max length of 40 in each columns after concatenate address1,address2,address3
E.g Field data_length
Address1 49
Address2 32
Address3 33
now I need to concate all the char and split in 40 char per field i.e. 49+32+33 = 114
Field data_length
Address1 40
Address2 40
Address3 24
How to fetch all the rows in a cursor in local variables(host variables) in PRO C . /*For x in cur is not working....*/
View 2 Replies View RelatedLets say I have a table in ORACLE database like:
ACC_ID | ACC_AMT
111 | 10000
111 | 12000
111 | 14000
222 | 25000
222 | 30000
333 | 18000
333 | 27000
333 | 13000
333 | 15000
I want to get the output as:
ACC_ID_1 | ACC_AMT_1 | ACC_ID_2 | ACC_AMT_2 | ACC_ID_3 | ACC_AMT_3
111 | 10000 | 222 | 25000 | 333 | 18000
111 | 12000 | 222 | 30000 | 333 | 27000
111 | 14000 | null | null | 333 | 13000
null | null | null | null | 333 | 15000
I need each different ACC_ID with ACC_AMT in different columns. The table may have other different ACC_ID also, but I will fetch only what I need. What is the best way to do this?
So far I have tried this:
SELECT
(CASE WHEN ACC_ID=111 THEN ACC_ID END) AS ACC_ID_1,
(CASE WHEN ACC_ID=111 THEN ACC_AMT END) AS ACC_AMT_1,
(CASE WHEN ACC_ID=222 THEN ACC_ID END) AS ACC_ID_2,
(CASE WHEN ACC_ID=222 THEN ACC_AMT END) AS ACC_AMT_2,
(CASE WHEN ACC_ID=333 THEN ACC_ID END) AS ACC_ID_3,
(CASE WHEN ACC_ID=333 THEN ACC_AMT END) AS ACC_AMT_3
FROM <TABLE_NAME>
But I am not getting the desired result.
From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?
View 2 Replies View RelatedI'm using dynamic sql (DBMS_SQL) to define columns of ref cursor. It works Ok but the problem is when i'm using PL/SQL CURSOR in the REF CURSOR. Then,I'm getting :
Error at line 3
ORA-00932: inconsistent datatypes: expected NUMBER got CURSER
ORA-06512: at "SYS.DBMS_SQL", line 1830
ORA-06512: at "TW.PRINT_REF_CURSOR", line 28
ORA-06512: at line 9
Here is my code:
set serveroutput on
exec DBMS_OUTPUT.ENABLE(1000000);
declare
l_cursor sys_refcursor;
begin
[code]....
Is there a solution or bypass?
Table structure:
table x
x1 x2 (Columns)
1 x
2 y
1 z
now i need to o/p like this
1 x,z
2 y
how to fetch data in above format.
I want to write a SELECT query on the data which are collected in a PLSQL table which is having 4 columns.
Looping through all the records in the PLSQL table will not get my requirement. Because I need to group the data based on two columns and need to fetch the count of groups.
Is there any way to query that PLSQL table?
what ios wrong in the following code
create or replace type testobj as object(col1 number);
create or replace type tabtest as table of testobj;
create or replace procedure proc(a out tabtest) is
cursor c is
[code]..
the view from where we can fetch information for a foreign key viz. reference table, referenced columns etc.
View 3 Replies View Relatedhow to get name of coloumn and table name which is being modified in trigger
View 8 Replies View RelatedIm supposed to fetch first names, last names and age of some people based on their birthdate. In my code so far i manage to get the names and the birthdates but what i actually need is a name and lastname and age for example 65 years.
here is the code :
SET SERVEROUTPUT ON
DECLARE
CURSOR C_kundålder IS
SELECT FNAMN,ENAMN,PNR
FROM BILÄGARE;
v_fnamn bilägare.fnamn%TYPE;
[code].....
In my sql query, how can i fetch the row with max row count? the query has around 10 columns.
View 2 Replies View RelatedOS : widows 2003
Oracle 9i release 2
I need to Fetch 1 lakh rows from table (all rows) in fastest way.
How to do it?
I need to fetch the data from a particular column and display it as a row of data.
For example,
Table
Col1 col2 col3
1 6 10
1 7 11
1 8 12
2 6 18
2 7 null
2 8 19
Data should be diplayed using col 2 as partition as below
col1 col3 col3 col3
1 10 11 12
2 18 null 19
Note: I have also referred to this link [URL]....
I have created two tab pages.when i change tab then it should be display automatically all the records in that tab without pressing any.
View 1 Replies View Relatedi am fetching one record based on date but not able to fetch the data.
in my table pdate column is there with date datatype and value is in that is:15-OCT-12 so i am fetching empid based on dates.
select empid from masterprocessdailydata where pdate=to_date('15/OCT/12','dd/MM/yy'); but not getting the empid.
create table test_exp (oid number, ioid number, status varchar2(20));
Below are the insert statements.
Insert into TEST_EXP (OID, IOID, STATUS) Values (1, 100, 'NEW');
Insert into TEST_EXP (OID, IOID, STATUS) Values (1, 101, 'DISCO');
Insert into TEST_EXP (OID, IOID, STATUS) Values (1, 102, 'CANCELLED');
Insert into TEST_EXP (OID, IOID, STATUS) Values (2, 103, 'NEW');
Insert into TEST_EXP (OID, IOID, STATUS) Values (3, 104, 'DISCO');
Insert into TEST_EXP (OID, IOID, STATUS) Values (4, 105, 'DISCO');
Insert into TEST_EXP (OID, IOID, STATUS) Values (4, 106, 'NEW');
Insert into TEST_EXP (OID, IOID, STATUS) Values (5, 107, 'NEW');
Insert into TEST_EXP (OID, IOID, STATUS) Values (5, 108, 'CANCELLED');
[code]...
Now my problem is we should fetch the data based on the below rules
If an OID contains 2 IOIDs for which there is a NEW and DISCO status attached, then fetch the 2 records
If an OID has only 1 of these status, then ignore the same
If an OID has none of the 2 status, then ignore the same.
The expected output will be like below:
OID|IOID|STATUS
1 |100 |NEW
1 |101 |DISCO
4 |105 |DISCO
4 |106 |NEW
i am running one query which is here
INSERT INTO shiftsample (Empid, PPDate, Inpunch, outpunch)( SELECT Emp_ID, PDate, In_Punch, Out_Punch FROM ProcessDailyData WHERE PDate = to_char(2012-10-15,'yyyy-MM-dd') AND Emp_ID = '00000001' );
in this query pdate has timestamp datatype and in shift sample ppdate column has date type. so i am not able to insert value from process daily data table.
getting this error.
SQL Error: ORA-01481: invalid number format model
01481. 00000 - "invalid number format model"
*Cause: The user is attempting to either convert a number to a string
via TO_CHAR or a string to a number via TO_NUMBER and has
supplied an invalid number format model parameter.
declare
cursor c1 is select distinct edt, regno, name, desgn, form_no, form_status, recd_on
from ol_registration_vu
where RECD_ON between :control.REC_FROM and :control.REC_TO ;
[Code]....
this coding giving me only one record i.e the last record of the table, whereas the table has 50 records. how can i get all records from the table in the form datablock.
This is my data
ID TIME_IDVCL_IDIDLE_END_TIME START_AT
351601834326910110/29/2009 1:18 10/29/2009 1:18
351601837056910110/29/2009 1:51 10/29/2009 1:51
351601838106910110/29/2009 2:39 10/29/2009 2:39
351601840626910110/29/2009 3:04 10/29/2009 3:04
351601841466910110/29/2009 3:09 10/29/2009 3:09
I want to minus 1st row of START_AT from 2nd row of END_TIME means (10/29/2009 1:51 - 10/29/2009 1:18)
i want to load all rows of single columns into one variable. After that, that variable will use in any side of the pl sql block.
SET serveroutput ON
DECLARE
CURSOR CUR_DATA
IS
SELECT DAS_SECURITY_CODE FROM SECURITY_TYPE WHERE ASSET_TYPE='DERIVATIVES';
rec_data CUR_DATA%rowtype;
[Code]....
how to resolve this. above query,variable holds last value which fetched from cursor.