I want to fetch the data through the cursor and cursor is getting the value of group_code through the variable 'a'. but when i am writing the code like this it is not coming.
My code is like this :
declare
a varchar2(400):='';
cursor c1 is select ref_no,ref_code,company_id from stock_detail where company_id=:global.company_id
[Code]....
when i run this code i get a invalid number error
create or replace
PROCEDURE BULK_REJECT(System_name VARCHAR2)
as
MDM_run_id VARCHAR2(14);
V_sql clob;
cursor Job_metric is
select rowid_job,system_name, table_display_name, run_status
[code]....
create or replace PROCEDURE newprocedur(outname OUT VARCHAR2,outroll OUT NUMBER) AS
CURSOR c1 IS
select Name,Rollno,Section from emp;
BEGIN
Open c1;
fetch c1 into outname,outroll;
Here out of 3 columns in cursor is it possible to fetch only two columns using FETCH like i did above?
I have the following piece of
CREATE OR REPLACE PROCEDURE COMP_RECORDS
IS
l_query VARCHAR2 (10000) := '';
CURSOR TBL1
IS
SELECT TABLE_NAME, COLUMN_NAME FROM COLS_TO_COMP WHERE TABLE_NAME='ACE_HIST';
TBL1_REC APP.COLS_TO_COMP%rowtype;
[Code]..
However I am getting an ORA-00923 exception with message as "FROM keyword not found where expected". know if I can/cannot use a cursor to fetch column names for a table?
I'm currently facing a non-critical situacion while trying to update a table. Here's the PL/SQL Code. It's a pretty straight-forward script, It just update one single column of the table. The only problem is that I have to update over 15 milions records. When I use the for update cursor, I put inside the loop a counter, when it reaches 1000 records, then commit, else keep counting.
The block throws the exception ORA-01002: fetch out of sequence.
I've tried to do some reserch on Google, buy it only says it is an out of secuence fetch caused by a commit inside a for update cursor.
My question is. Is there any risk by putting the commit under the end loop, I mean by doing this I'd be updating over 15.000.000 records at the same time. Will I have any issue with the rollback segment ?
Here's the code as along with the Create Table and Insert statements.
CREATE TABLE TEST_1
(
TEST_ID NUMBER PRIMARY KEY,
IS_LOCKED NUMBER NOT NULL
);
INSERT INTO TEST_1
(TEST_ID, IS_LOCKED)
VALUES
(1, 0);
[Code]....
I need to open an explicit cursor for making a total: after I have to use the same information of that explicit cursor for dividing a column of the cursor by that total. It is not enough to open close, reopen and reclose because I just obtain one register at the same time and it is the same register two times consecutively.
I don't want to use auxiliary structures cause there are 18000 columns for 10200 rows.
FOR i IN 300..300 --18000
LOOP
y:=ymax-ysize*(i+0.5);
[Code]......
FRM-40501: ORACLE error: unable to reserve record for update or delete.
ORA-24374: define not done before fetch or execute and fetch
My master-detail form has single canvas. For both blocks, master and detail, two tables joined together in each. One table to be updated, second table has some info for reference (query only).
I am getting these errors when in detail block the item from LOV is selected for existing record. This does not happen for new record inserted in detail block.
I have created two non base table text items(from date, to date) and if values are not entered from front end i.e. null then hadrcoded in pre_query trigger to default values.But even i enter values dynamically from front end and when ever i press fetch button ,it is taking default values i.e. it is not accepting values what i have entered.
View 6 Replies View Relatedi have a proc that is taking p_serial_number refsursor as in parameter. the structure of p_serial_number is required to be
mfg_prod_cdchar (3 byte)
mfg_prod_seq_no char (6 byte)
How do I need to define this ref cursor ? and when I use it in my Procedure how do I fetch the column values ?
i HAVE THE FOLLOWING CODE WRITTEN IN A *.pc FILE. I am trying to loop to fetch data from cursor. But the code exist after it fetches the first record. Let me know what is it the right way to fetch data from cursor?
EXEC SQL BEGIN DECLARE SECTION;
char str[64];
EXEC SQL END DECLARE SECTION;
/*cursor declarations*/
EXEC SQL DECLARE Get_SQLText_Cursor CURSOR FOR
[Code]....
How to fetch all the rows in a cursor in local variables(host variables) in PRO C . /*For x in cur is not working....*/
View 2 Replies View RelatedHow can i get data from Ref cursor on Oracle forms?
View 1 Replies View Relatedi want to use cursor to get data from db to "control block "(db item =no ) this data had where clause depend on item on other block
this my code :
declare
cursor get_sol is
select SOL_STEP,PROB_ID
from MI_SOLUTION
where PROB_ID=:MI_FORM_PROB.PROB_ID;
begin
go_block('control');
[code]......
when am using when_validate_item trigger error raise :
FRM-40737:Illegal restricted procedure next_record in when_validate_item
that's the trigger ? or how to solve ? in case of execute query in what trigger i will write the same code to get data in case of execute query by user .
SELECT
contgrp_num,
cpgrp_desc,
strategy_id,
perftyp_cd,
stiertyp_id_calcbase,
stiertyp_id,
cpgrp_flg_aggr,
pgrptyp_cd
[Code]..
The above query is not returning any value. But, when I put this within a begin-end block, its fetching data.
why its not returning any data without the begin-end block.
The entire code has an outer begin-end block within which the cursor is also defined.
I have the following data with me
AddId Salaries
10600
10 50
10 400
10 300
10 200
10600
20 200
30200
30 600
30 300
Required output should be
The average of the three highest salaries exceeds 100, only those rows should be visible...wrt each addid.
I'm using dynamic sql (DBMS_SQL) to define columns of ref cursor. It works Ok but the problem is when i'm using PL/SQL CURSOR in the REF CURSOR. Then,I'm getting :
Error at line 3
ORA-00932: inconsistent datatypes: expected NUMBER got CURSER
ORA-06512: at "SYS.DBMS_SQL", line 1830
ORA-06512: at "TW.PRINT_REF_CURSOR", line 28
ORA-06512: at line 9
Here is my code:
set serveroutput on
exec DBMS_OUTPUT.ENABLE(1000000);
declare
l_cursor sys_refcursor;
begin
[code]....
Is there a solution or bypass?
Table structure:
table x
x1 x2 (Columns)
1 x
2 y
1 z
now i need to o/p like this
1 x,z
2 y
how to fetch data in above format.
I want to write a SELECT query on the data which are collected in a PLSQL table which is having 4 columns.
Looping through all the records in the PLSQL table will not get my requirement. Because I need to group the data based on two columns and need to fetch the count of groups.
Is there any way to query that PLSQL table?
This is my data
ID TIME_IDVCL_IDIDLE_END_TIME START_AT
351601834326910110/29/2009 1:18 10/29/2009 1:18
351601837056910110/29/2009 1:51 10/29/2009 1:51
351601838106910110/29/2009 2:39 10/29/2009 2:39
351601840626910110/29/2009 3:04 10/29/2009 3:04
351601841466910110/29/2009 3:09 10/29/2009 3:09
I want to minus 1st row of START_AT from 2nd row of END_TIME means (10/29/2009 1:51 - 10/29/2009 1:18)
I have a table with a BLOB column ;
I want read data from table and insert to another table with a cursor
My code is :
procedure read_data is
cursor get_data is
select id,image from picture1;
id1 number;
pic blob;
begin
open get_data;
[code]....
when I run form , error FRM-40734 occurred
error in line " fetch .... "
I am trying to write a proper query to fetch data from database. Scenario:
I need to retrieve employees who are not working in multiple departments. scott@TESTCRM> select * from emp1;
EMPNO DEPTNO
---------- ----------
7654 30 7698 30 7788 20 7788 30 7876 20 7900 10 7900 30 7902 20 7934 10
scott@TESTCRM>
Ouput Expected is
EMPNO DEPTNO
---------- ----------
7654 30 7698 30 7876 20 7902 20 7934 10
I need to design a report out of the below data:
1. bprf_no will be my primary field
2. report parameters will be the bill_month & no_of_months
Based on above 2 parameters I need to scan through the data for BILL_MONTH <= '20-Jun-2012' and NO_OF_MONTHS <= 6 the other criteria being the AVG_IND in (1,2).
In brief the criteria will be to pick all BPRF_NO having AVG_ID in (1, 2) consecutively till a break (AVG_IND not in (1, 2) starting from the given BILL_MONTH and going below this period, that is BILL_MONTH <= '30-Jun-2012'.
For the below data, if my parameters are: BILL_MONTH <= '30-Jun-2012' and NO_OF_MONTHS <= 3, only the underscore added data should be picked (as they fulfill the criteria) and the report output will be like:
BPRF_NO BILL_MONTH NO_OF_TIMES
-------------------------------------------------
BP05 30-Jun-2012 6
BP06 30-Jun-2012 6
BP07 30-Jun-2012 6
BP08 30-Jun-2012 6
Here the NO_OF_TIMES is the count, that is no of times the BPRF_NO falls into the above mentioned criteria consecutively starting from the provided BILL_MONTH.
BPRF_NOBILL_MONTH VOID_STATUS AVG_IND
------- ----------- ------------ --------
BP0130-Jun-1200
BP0230-Jun-1200
BP0330-Jun-1201
BP0430-Jun-1201
_BP0530-Jun-1201_
_BP0630-Jun-1202_
[code]....
My below query is fetching me wrong data:
----- Query -----
select bprf_no, no_of_month--count(*)
from
(
select a.bprf_no, count(*) no_of_month
[code]....
Here BP03 & BP04 should not come into the listing itself.
join two oracle tables for fast fetch of data from table.
View 1 Replies View Relatedwe are using ERP System based on Oracle DB. I have an oracle client 10.2.0 installed on my machine (Win 7/64-Bit) and trying to create Excel(2010) VBA-Macro to get datas out of the Oracle DB using a SQL query:
On my old machine (Win XP/Excel 2007) following worked fine:
strConOracle = "Driver={Microsoft ODBC for Oracle}; " & _
"CONNECTSTRING=(DESCRIPTION=" & _
"(ADDRESS=(PROTOCOL=TCP)" & _
"(HOST=" & strHost & ")(PORT=1521))" & _
"(CONNECT_DATA=(SERVICE_NAME=" & strDatabase & "))); uid=" & strUser & " ;pwd=" & strPassword & ";"
Set oConOracle = CreateObject("ADODB.Connection")
Set oRsOracle = CreateObject("ADODB.Recordset")
oConOracle.Open strConOracle
Set oRsOracle = oConOracle.Execute(strSQL)
All the datas in the variables coming from cells or userforms - I am 100% sure all this is correct, as as said, it works on any Win XP Machine with Excel 2007
But trying same with Win 7/64-Bit/Excel 2010 gives me following error: MS ODBC Driver for Oracle: ora-01019: unable to allocate memory in the user side.
I have created two tab pages.when i change tab then it should be display automatically all the records in that tab without pressing any.
View 1 Replies View Relateddeclare
cursor c1 is select distinct edt, regno, name, desgn, form_no, form_status, recd_on
from ol_registration_vu
where RECD_ON between :control.REC_FROM and :control.REC_TO ;
[Code]....
this coding giving me only one record i.e the last record of the table, whereas the table has 50 records. how can i get all records from the table in the form datablock.
i create form in which first block is non database having 2 items from_date and to_date and one button is there.when i click on button i.e when button pressed new window is open having new database block
i write code on when button pressed
HIDE_WINDOW('XX_RFQ_FIND');
SET_WINDOW_PROPERTY('XX_RFQ_FIND', visible, property_false);
SHOW_WINDOW('XX_RFQ_ACKT');
GO_ITEM('LE_NAME');
SEARCH_REQ;
[code]...
my problem is that when i click on button i fetch only one record
i want to fetch the data in my form from table, by using item_code.
eg when i write the item_code its value get matched in same table and fetch the another
columns by item_code.
I have made a travel booking system which comprises of 3 forms
1)Travel Booking form
2)Reservation Form
3)Cancellation Form
Under one booking number i can add multiple users in which they can have there multiple travels.
Users can cancel there individual travels under a prescribe booking number which on doing the Cancel flag turns to 'Y'.
What i want is, If a user is cancelling his/her travel under any booking number then while retriving the records in Travel Booking form, the travels which are cancelled should not be in enable mode.
For one user there can be 4 travels out of which 2 are cancelled, how can i track only those records whoes cancel flag is set to Y. some logic to find it out. Else can i use :system.cursor_record. If yes, How to use it for this system.
ORA-01422: exact fetch returns more than requested number of rows.
I receive this error because i tried to introduce the below coding in a post query of the block.
begin
select supplier_cd into :fin_ex_rev_head.vendor_code
from fin_ex_rev_receipts
where receipt_date
between :keyblock.receipt_date
[code].....
