Balance Calculation And Subtracting / Displaying Dates?
Sep 3, 2010
My problem is that I am working with a balance (Infor/WorkBrain - Time & Attendance) I have a balance called Bank Holiday(bal_id 10044). Every holiday that an employee works, he is allowed to take another day off in lieu of the day he worked. The employee has up to twelve months to take that holiday.
My job is to figure out when he worked that holiday (not a problem) and send an email/note at the 11 month mark and notify the employee and supervisors that said employee has 1 month to use his banked holiday.
My problem is the data/constraints I am working with. I can tell what day the holiday was based on a time code (EBLOG_MESSAGE) and EBLOG_DELTA shows a positive 1. I can also tell when the employee has used a bank holiday (EBLOG_DELTA is -1) and EBLOG_MESSAGE = FR_HWO.
But how to I perform the deduction so that I get four most current dates. Meaning since my first date that the employee gets for a holiday wokred is 6/3/2010 but the employee used a bank holiday on 8/31/2010. So I want to display the dates 7/1/2010, 7/27/2010, 8/1/2010 and 10/15/2010.
My preference would be not to add anything new to this table as it is a core table for Infor/WorkBrain.
INSERT INTO JOB_EXECUTION (RUN_DATE ,RUN_ORDER ,RUN_DIV ,RUN_TYPE ,RUN_FMT ,PICKUP_STATUS ,START_TIME ,END_TIME ,REMARKS) VALUES (sysdate-1,1,'AE','FILE-HFM','NY_PLAN-2014','FINISHED',TRUNC(SYSDATE),SYSDATE,'"Load Process is INITIATed: with [BATCHID:= FILE-HFM_RUN_ORDER#_5 ]: as of @ 26-Sep-2013 10:26:50. AFM-Load END PROCESS: as of @ 26-Sep-2013 10:26:52. AUTO-LOAD RUNNING :as of @ 26-Sep-2013 10:26:57. FILEs-LOAD PROCESS: as of @ 26-Sep-2013 10:26:59. ALLOCATIONs PROCESS: as of @ 26-Sep-2013 10:27:52.
[code]....
The select I tried.
WITH reporting_info AS ( SELECT b.run_date,b.run_div,b.run_type,b.run_fmt,1234 as Batch_id, start_time as BATCH_START_TIME, end_time AS BATCH_END_TIME, REPLACE(substr(substr(remarks,instr(remarks,'FILEs-LOAD PROCESS: as of @ ')), 0,instr(substr(remarks,instr(remarks,'FILEs-LOAD PROCESS: as of @ ')),chr(10))-2 ),'FILEs-LOAD PROCESS: as of @ ','') FILE_LOAD, REPLACE(substr(substr(remarks,instr(remarks,'ALLOCATIONs PROCESS: as of @ ')), 0,instr(substr(remarks,instr(remarks,'ALLOCATIONs PROCESS: as of @ ')),chr(10))-2 ),'ALLOCATIONs PROCESS: as of @ ','') ALLOCATION,
[code]....
Since the date format does not contain AM or PM in it ... while subtracting time values crossing midnight the value goes in negative .... How to subtract two date strings with out AM or PM values to get a positive value ?
I am having a problem when calculating dates in a package usiong Toad. I have my function :
FUNCTION PORTFOLIO_MEMO_RPT_Sql( schema_name IN VARCHAR2 , select_business_date IN DATE ) RETURN VARCHAR2.....SELECT DISTINCT Case when NVL(TO_DATE(''09/24/2013'',''MM/DD/YYYY'') - DECODE(mn.Active, 1, mn.DueDate, sc.DueDate ),0) = 0 then ''0Days'' when NVL(''' || select_business_date || ''' - DECODE(mn.Active, 1, mn.DueDate, sc.DueDate ),0) = 0
then ..... when I give it my variable from outside , it is not working......but when I use a date inside, it works. I call my function from outside like :
SELECT * FROM TABLE ( FI_rpt.Fi_Rpt_Pkg_loan.PORTFOLIO_MEMO_RPT (sys_context('userenv','session_user'),TO_DATE('09/24/2013','MM/DD/YYYY')) )
Version: 11.2 I am not an SQL expert. I am trying to subtract the start time and end time and thereby find the difference between these two times. In the below example , the difference between start_time and end_time is around 52 minutes (6:15 PM to 7:07 PM)I tried some stuff to find the difference below. But it didn't work out .
SQL> create table t (start_time date, end_time date); Table created. SQL> desc t Name Null? Type ----------------------------------------------------------------- -------- --------------------- START_TIME DATE END_TIME DATE SQL> insert into t values (to_date('24/JUN/2013 18:15:42', 'DD/MON/YYYY HH24:MI:SS'), to_date('24/JUN/2013 19:07:54','DD/MON/YYYY HH24:MI:SS')); 1 row created. SQL> commit; Commit complete. SQL>SQL>SQL> select * from t; START_TIME END_TIME-------------------- --------------------24 Jun 2013 18:15:42
i want to get balanced amount based on max(suid ).
my query is
create or replace procedure prc_stk_upd_pur(v_comp_suid in i_purchase_h.pih_company_suid%type, v_area_suid in i_purchase_h.pih_area_suid%type, v_invoice_dt in i_purchase_h.pih_invoice_date%type, v_pih_suid in i_purchase_h.pih_suid%type, v_type in i_purchase_h.pih_type%type) is [code]......
my output is SEFF_SUIDSEFF_INV_DATESEFF_LOT_SUIDSEFF_LOC_SUIDSEFF_TRAN_SUIDSEFF_TRAN_TYPESEFF_COMP_SUIDSEFF_AREA_SUIDSEFF_STOCK_INSEFF_STOCK_OUTSEFF_CURRENT_STOCKCREATE_USERCREATE_TIMESEFF_RATE_USDSEFF_RATE_LCURNSEFF_PID_SUID 1121411/29/20121317151346LP11115720.00020.000SYSTEM29-NOV-12 06.53.45.000000 PM116.14107665.30601382 2121511/29/20121317151346LP11115755.00055.000SYSTEM29-NOV-12 06.53.45.000000 PM116.14097665.30001383 3121611/29/20121317151346LP11115730.00030.000SYSTEM29-NOV-12 06.53.45.000000 PM0.440729.08401384
my output should come SEFF_SUIDSEFF_INV_DATESEFF_LOT_SUIDSEFF_LOC_SUIDSEFF_TRAN_SUIDSEFF_TRAN_TYPESEFF_COMP_SUIDSEFF_AREA_SUIDSEFF_STOCK_INSEFF_STOCK_OUTSEFF_CURRENT_STOCKCREATE_USERCREATE_TIMESEFF_RATE_USDSEFF_RATE_LCURNSEFF_PID_SUID 1121411/29/20121317151346LP11115720.00020.000SYSTEM29-NOV-12 06.53.45.000000 PM116.14107665.30601382 2121511/29/20121317151346LP11115755.00075.000SYSTEM29-NOV-12 06.53.45.000000 PM116.14097665.30001383 3121611/29/20121317151346LP11115730.000105.000SYSTEM29-NOV-12 06.53.45.000000 PM0.440729.08401384
I want to find the dates which have a date plus with in 2 days after this date. I mean group by 3 days each even the date i missing between two days. Actualy I want to find the start date where the employ was missing on job.
Basic concept is employes have allowed to use 10 personal leaves of a year. Each leave can be use for maximum 3 days.
If employ did not come on the job for one day or two days or three days, it shoul be count as ONE personal leave. And If employ is missing at job for four or five days, it should be count as 2 personal leaves.
After finding these days I want to select the starting date of 5th personal leave. (which is 16.01.10).
I am not a expert of using SQL, but I think it could be possible with using partitioning a table on the givin reslult and further partition the reslut on rownum() as rn and the using case statement where rn = 5.
Split a date into new dates according to black out dates!
Here is my tables:
CREATE TABLE travel ( start_date, end_date ) AS SELECT DATE '0000-01-01', DATE '9999-12-31' FROM DUAL;
[code]....
I have lets say a "travel date" and black out dates. I will split the travel date into pieces according to the black out dates.
Note: Travel Date can be between 0000-01-01 - 9999 12 31
Sample:
Travel Date:
Travel | START DATE | END DATE T | 2011 01 04 | 2011 12 11
Black Out Dates:
BO | START DATE | END DATE A | 2010 11 01 | 2011 02 11 B | 2011 01 20 | 2011 02 15 C | 2011 03 13 | 2011 04 10 D | 2011 03 20 | 2011 06 29
Excepted Result:
New Travel | START DATE | END DATE X1 | 2011 02 16 | 2011 03 12 X2 | 2011 06 30 | 2011 12 11
Visually:
Travel Date : -----[--------------------------]--
A : --[------]------------------------- B : ------[---]------------------------ C : --------------[---]---------------- D : ----------------[------]-----------
Travel Date : -[--------------------------------]--
BO Date A : ----[------]------------------------- BO Date B : -------------------------[---]------- BO Date C : ----------------[---]---------------- BO Date D : ------------------[------]-----------
Result X1 : -[-]------------------------------- Result X2 : -----------[--]-------------------- Result X3 : -----------------------------[--]--
I have one table where the item stock balance can be taken.What i want is like a ageing report based on the ending balance.If the ending balance is 10,000 for item a.It should bring all the Receipts which have qty lesser than 10,000.
I managed to write one function like below to get the receipts numbers but the format is 3778578-3778612-3790428 and i want to convert them into rows like
3778578 3778612 3790428
The function used is as below.
CREATE OR REPLACE FUNCTION l_get_rcpt ( l_item IN VARCHAR2, l_date DATE, l_bal IN NUMBER )
Is there a way to find running balance for accounts, suppose i have two tables.one for transaction and one summary of balance.
i want to have the closing balance based on transactions subtracted or added based on credit and debit for example.it will add to the running total if its debit and subtract if its credit and final output is the balance.
create table acnt_trans ( acnt_code varchar2(12),trans_date date,debit_amt number,credit_amt number); insert into acnt_trans values ('1001','02-FEB-2013',200,0); insert into acnt_trans values ('1001','03-FEB-2013',0,100); insert into acnt_trans values ('1001','04-FEB-2013',50,0);
[code]....
--I want the output as below.if i run the report as of '04-feb-2013'
trans_date , acnt_code , debit_amt,credit_amt , balance 02-feb-2013 1001 200 0 3200 03-feb-2013 1001 0 100 3100 04-feb-2013 1001 50 0 3150 -- this is the closing balance.
I am having a table with 5 lakhs transactions. I want to fetch the last balance for a particular date. So i have have returned a query like below.
SELECT curr_balance FROM transaction_details WHERE acct_num = '10'
[Code]...
This has to be executed for incrementing of 12 months to find the last balance for each particular month. But this query is having more cpu cost, 12 times it is taking huge time. how to remodify athe above query to get the results in faster way using analytical query. Whether this can be broken into two part in PL/SQL to achive the performance. ?
I am doing a report to show current balance, aging (30-60), (60-90), (90-120) and 120+ and a combination of all of these should be the total balance overdue.
If i use a formula cclumn in the report builder, how should i write this query to calculate the total?
I need to calcuate balance for last two cooprative years on input date.
example
if input date is-->"01-AUG-2012" if (month >=7) -->then i need to calculate from 01-july-2010 to 30-june-2011 and 01-july-2011 to 30-june-2012 and 01-july-2012 to input date.
if input date is-->"01-june-2012" if (month<7) -->then i need to calculate from 01-july-2009 to 30-june-2010 and 01-july-2010 to 30-june-2011 and 01-july-2011 to input date.
Background: We are migrating a lot of databases from one SAN appliance to another. We are doing this by adding new disks from the new SAN appliance to the existing disk groups, re balancing, removing the old disks from the disk groups, and then re balancing again.
Question: If I execute two ALTER commands with the same power on 2 or more separate disk groups, do both operations start executing right away? Or do they queue up and execute one after another?
I ask because we would like to queue up several re-balances so we don't have DBAs watching status bars all day.
How can I select all of the dates between two dates? For example, given the start date 12/2/2003 and the end date 12/5/2003 I want to return:
12/2/2003 12/3/2003 12/4/2003 12/5/2003
Is there a built in function for this? Is there a way for a function to return multiple rows? It has to be a function because I need to use it within other SQL statements.
i have attached the .csv file for gratuity calculation.
In the given criteria you can see if number of years 1 then he can get 1 salary if years 1.5 then 2 salary and so on also we need to take care about the leap year.
create table ex (sno number,ename varchar2(10),job_code char(4),sal number); insert into ex values(101,'John','Java',21000,'IT'); insert into ex values(102,'Michel','BI',25000,'IT'); insert into ex values(103,'Johny','Java',30000,'IT');
I have tested it and it is working as the way I expected: select 'to display week no as column' "Week &week_no" from dual;
The output: Week 16 ---------------------------- to display week no as column ...So how do I display Week 15, Week 17 etc based on the calculation of &week_no e.g. &week_no+1?
I have time fields that have been converted from a 12hr clock to a 24hr clock and these fields hold only the time...no date.
I need to be able to determine the difference between column A and B eg.
Column A: Column B: 11:00 14:00
I can remove the ':' by using the replace command, but as I need to run on a actual 24hr clock I am not sure how to tackle the calculation as it is not the full oracle datetime format.
Is it possible to calculate cumulatively in oracle sql queries, i.e. using the results of the last row for calculating the values in the current row?For example I want my query to return the following:
In col3 above, for feb I want to use the result returned for jan ((100 * 1)*2+200), for mar I am using the result returned for feb((100 * 2 + 200) * 3 + 300) and so on.
i.e. I want to use the previous value of column3 to derive the current value of column3. Like using the LAG function but on the analytically derived column itself.
SELECT FROM_TZ(CAST(TO_DATE('1999-12-01 11:00:00', 'YYYY-MM-DD HH:MI:SS') AS TIMESTAMP), 'gmt') AT TIME ZONE '+05:30' "Time at Time zone" FROM DUAL;
Time at Time zone 01-DEC-99 04.30.00.000000 PM +05:30
My requirement is that
I want to add 2 hours to DateTime i get here i.e. add two hours in result and display the resultant date and tine in time zone '+05:30'. I also want to check that the resultant time falls in business hours (9 am to 6 pm).
for making the query for following data,when we give start and end date then query need to calculate number of years.
if less than one year then return 0 if exact one year then return 1 if exact 1.5 years (18 months) then return 2 if exact 2 years (24 months) then also return 2 if exact 2.5 years (30 months) then return 3 if exact 3 years (36 months) then also return 3 if exact 3.5 years (42 months) then return 4 if exact 4 years (48 months) then also return 4 and so.
also we need to add leap year 1 day if exist in start and end date.
I am developing a form where I need to add Numbers.In fact we have a bag of Cones that contain 24 cones.In normal calculation when I add numbers for example
5.24 Plus 5.24 it will give the result 10.48
I Need the appropriate method to calculate if I add these two numbers it should give the result 5.24 Plus 5.24 the result should be 12
Currently I am working on payroll system where I have to calculate employees working hours/late coming hours/early going hours against its roster which is defined in the beginning of every month/week.
In roster form user define shift of every employee like
Code Name Shift 7 Saad Nafees A - 09:00 17:00 492 Muhammad Nasir Shahzad B - 17:00 01:00 243 Muhammad Tahir C - 01:00 09:00
Roster table structure
code varchar2 name varchar2 Shift date Remarks varchar2
shift table structure
code varchar2 timein date timeout date latetime date Hdaytime date
Oracle stores both date and time information in date data type, suppose today user change shift timings from 17:00 to 17:30 or user change timein/timeout in attendance form then oracle will store current date with user define timings.
Now this is the main problem which I am facing because whenever you calculate difference between timein and timeout or compare with its roster then output comes wrong because oracle returns total no of hours whenever you minus two dates.
