I have tested it and it is working as the way I expected: select 'to display week no as column' "Week &week_no" from dual;
The output:
Week 16
----------------------------
to display week no as column ...So how do I display Week 15, Week 17 etc based on the calculation of &week_no e.g. &week_no+1?
I have time fields that have been converted from a 12hr clock to a 24hr clock and these fields hold only the time...no date.
I need to be able to determine the difference between column A and B eg.
Column A: Column B: 11:00 14:00
I can remove the ':' by using the replace command, but as I need to run on a actual 24hr clock I am not sure how to tackle the calculation as it is not the full oracle datetime format.
I have a table where i need to update one field values based on another field of the same table , simply as it is.I have done this using one select all check box , on clicking that all check boxes of item_trans table will get selected , then i will un select some of check box and then using one button, i will update the value of the fields which are checked only.
I have put the sample code but when i am updating its taking long time and hanging.I am also attaching the form based on the test case provided.
insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE1',40,NULL); insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE2',20,NULL); insert into item_trans(TRANS_ITEM,TRANS_QTY,TRANS_ACT_QTY) VALUES ('TREE3',20,NULL);
--i want to set the value of trans_Act_qty as trans_qty
--i create one dummy or test block to keep the select all check box. for that table test script is
CREATE TABLE TEST ( C VARCHAR2(2000 BYTE), B NUMBER, A NUMBER );
insert into test (C,B,A) values ('A',1,1);
--code written in select all check box which is created on test.block.
BEGIN GO_BLOCK('item_trans'); FIRST_RECORD; LOOP :M_END_YN := :M_END_ALL; [code].......
--code written in M_END_YN ( actual check boxes where i will uncheck).
IF :M_END_YN = 'N' THEN :M_END_ALL := 'N'; END IF;
--code written on button to update those values which are checked.
BEGIN GO_BLOCK('item_trans'); FIRST_RECORD; LOOP IF :M_END_YN = 'Y' THEN [code]......
I have partitioned the table based on field.But when I am selecting by Partition or by the field I am getting Explain plan as Table Access full.I am pasting the sql and Explain Plan here. The table has two partition by BOOKING_DT_WID. One less than 20100801 and other less than 99991231.
CODESELECT * FROM WC_BOOKING_SALESREP_F WHERE BOOKING_DT_WID >= 20100801; SELECT * FROM WC_BOOKING_SALESREP_F PARTITION(SALESREP_LESS1_99991231); Here is the Explain Plan for the same. CODESELECT STATEMENT ALL_ROWSCost: 1,501 Bytes: 293,923,641 Cardinality: 809,707 4 PX COORDINATOR [code]....
How do I know if the sql is doing partition prune.
I am attempting to update a single field in one table based on a select from two tables. However, I am receiving the following error.
ORA-00933: SQL command not properly ended
The sql I am using is as follows:
update PS_TRNS_CRSE_DTL set RQMNT_DESIGNTN = 'TRN' FROM PS_TRNS_CRSE_DTL A, PS_STDNT_CAR_TERM B where (SELECT A.EMPLID, A.ACAD_CAREER, A.INSTITUTION, A.MODEL_NBR, A.ARTICULATION_TERM, A.TRNSFR_EQVLNCY_GRP, A.TRNSFR_EQVLNCY_SEQ, A.TRNSFR_STAT, A.GRADING_BASIS, A.RQMNT_DESIGNTN, B.STUDY_AGREEMENT FROM PS_TRNS_CRSE_DTL A, PS_STDNT_CAR_TERM B [code]......
In the query below, I'm attempting to replace task codes with task descriptions by left joining to a multi-purpose control table.
In our corp, the description for the task code varies based on the value of change_program in each record, so rather than referencing the value of code_index.tabl statically as I do in the query below (201), I need a dyanamic variable to be defined for each record based on the value of work.change_program, which would represent the value for code_index.tabl.
For each record if change_program =1 then v_tabl = 201 elseif change_program =2 then v_tabl = 202 elseif change_program =3 then v_tabl = 203 else v_tabl = 201
how to declare and use variables.
SELECT account, change_program, task_code_01, task_code_02, task1.longdesc, task2.longdesc FROM work
I have a table test with 10,000 records in it and 50 columns.I have to select those rows which contain values as "Sales Dum" in their field..For table with small number of colums i did this
SELECT * FROM tbl_website_dtl WHERE created_by like '%Sales%' or website_name like '%Sales%' or website_code like '%sales%';But should i do for table containing 50 columns.
Personally, I don't need the top value(s), but it would be nice.I was trying a few routes with rownum, and I can get it to pull 1 set of pairs with a where location= condition, but I can't seem to successfully combine the two.
I have a need to change the LOV of a page item's select list based on the selection in another page item's select list. So in other words, for a page item that is a select list, I need to use one LOV normally, and a different LOV if the value of a different page item is set to X.
A dynamic action would be useful here (on change where Select List 1 = x), but I don't know how to take the action of changing LOVsfor Select List 2 based on that action.
I need to partition a existing table based on varchar2 field (which is actaully date value but storing as character in the table). Using below statement for creating table, but getting error.
I would like to populate a text box based on selection from a LOV. If someone selects a LOV value and then tabs off off of that element, I would like the text box populated from a sql statement based on the LOV value in the predicate.Application Express 4.1.1.00.23
I am having a problem with auto populating different fields based on inventory no. field.. This is a bug giving to me to work on and i not able to figure out how to populate the other fields.
How to set any triggers for the items to auto populate and i am suppose to finish this work today.
i have multi data block filed. and checkbox field which based on control block...My task is when i check checkbox only one field should enabled and my mouse goes to that field
My item field based on data block and checkbox based on control block,while i checked chkbox1 , only item31 on that current record should be enabled and i changed value only on that field
when i checked chkbox1 , my cursor goes to item31...not item32
i have attached the .csv file for gratuity calculation.
In the given criteria you can see if number of years 1 then he can get 1 salary if years 1.5 then 2 salary and so on also we need to take care about the leap year.
create table ex (sno number,ename varchar2(10),job_code char(4),sal number); insert into ex values(101,'John','Java',21000,'IT'); insert into ex values(102,'Michel','BI',25000,'IT'); insert into ex values(103,'Johny','Java',30000,'IT');
Is it possible to calculate cumulatively in oracle sql queries, i.e. using the results of the last row for calculating the values in the current row?For example I want my query to return the following:
In col3 above, for feb I want to use the result returned for jan ((100 * 1)*2+200), for mar I am using the result returned for feb((100 * 2 + 200) * 3 + 300) and so on.
i.e. I want to use the previous value of column3 to derive the current value of column3. Like using the LAG function but on the analytically derived column itself.
SELECT FROM_TZ(CAST(TO_DATE('1999-12-01 11:00:00', 'YYYY-MM-DD HH:MI:SS') AS TIMESTAMP), 'gmt') AT TIME ZONE '+05:30' "Time at Time zone" FROM DUAL;
Time at Time zone 01-DEC-99 04.30.00.000000 PM +05:30
My requirement is that
I want to add 2 hours to DateTime i get here i.e. add two hours in result and display the resultant date and tine in time zone '+05:30'. I also want to check that the resultant time falls in business hours (9 am to 6 pm).
for making the query for following data,when we give start and end date then query need to calculate number of years.
if less than one year then return 0 if exact one year then return 1 if exact 1.5 years (18 months) then return 2 if exact 2 years (24 months) then also return 2 if exact 2.5 years (30 months) then return 3 if exact 3 years (36 months) then also return 3 if exact 3.5 years (42 months) then return 4 if exact 4 years (48 months) then also return 4 and so.
also we need to add leap year 1 day if exist in start and end date.
I am developing a form where I need to add Numbers.In fact we have a bag of Cones that contain 24 cones.In normal calculation when I add numbers for example
5.24 Plus 5.24 it will give the result 10.48
I Need the appropriate method to calculate if I add these two numbers it should give the result 5.24 Plus 5.24 the result should be 12
Currently I am working on payroll system where I have to calculate employees working hours/late coming hours/early going hours against its roster which is defined in the beginning of every month/week.
In roster form user define shift of every employee like
Code Name Shift 7 Saad Nafees A - 09:00 17:00 492 Muhammad Nasir Shahzad B - 17:00 01:00 243 Muhammad Tahir C - 01:00 09:00
Roster table structure
code varchar2 name varchar2 Shift date Remarks varchar2
shift table structure
code varchar2 timein date timeout date latetime date Hdaytime date
Oracle stores both date and time information in date data type, suppose today user change shift timings from 17:00 to 17:30 or user change timein/timeout in attendance form then oracle will store current date with user define timings.
Now this is the main problem which I am facing because whenever you calculate difference between timein and timeout or compare with its roster then output comes wrong because oracle returns total no of hours whenever you minus two dates.
We want to calculate Annual leave the scenerio is as follows
1. Employee service more the one year 2. if joining date is 07-04-2008 than on 07-04-2009 completed one year and on 07-04-2010 completed two years and so on. day and month of date must be the same.
so we need YEAR*14. e.g. if 1 year completed then 1*14 if two years completed then 2*14 and so on. by this we will get the opening of Annual leaves.
We have another table where we entered the leave day by day in whole year, if he avail 10 leaves in first year then 4 will be remaining and we can say it is the closing of first year and opening of second year. so on second year he will entitled 14 more leaves so 14 + 4 = 18 should be opening of next year.In year Caclulation Day and Month must be the same for example 07 day, 04 month for every year. 14 Annual leaves are fix for each year
I want to write a sql qeuery to get result similar to expected average column as shown in sheet.
Record can be uniquely identified by columns ID, PRODUCT and OFFICE. I want to calculate average for each date considering the same record does not exists earlier i.e. I want to consider the latest vote while calculating average. E.g.
Average till date 1/1/2011 is Avg (2, 4, 3) = 3 (as no repeating vote value exists) Average till date 2/1/2011 is Avg (4, 3, 5, 3) = 3.75 (excluding vote value 2 as 122_UK_LONDON was provided his vote earlier, so considered latest vote value i.e. 5) Average till date 3/1/2011 is Avg (3, 5, 3, 6, 5, 8 ) = 5 (excluding vote value 2 for 122_UK_LONDON and vote value 4 for 967_Europe_London)
I'm getting trouble in getting the sum of all the product's prize present in the form fields of invoice form. For example, I user bought 2 products so I want to get there prize sum in the total box. I first want that I've QUANTITY, DISCOUNT and SELLING PRIZE.
If I multiply Quantity with Selling Prize then I gets the result in Product and Quantity Total Box. However, Now I want to add discount option in it. Means if user is providing 10% discount to his/her customer then Quantity * Selling Prize - Discount% becomes a result in product's solution final prize box.
Here is the pic..
Look...Now here..I've added 22 in quantity.. now if I'll insert 10% in discount then the total will comes in Amount Display Box.
I'm currently using this coding on on Prize Box.. :SP_PRODUCT_PTOTAL := NVL(:SP_PRODUCT_QUANTITY,0) * NVL(:SP_PRODUCT_PRIZE,0) * NVL(:SP_PRODUCT_DST,0) / 100;
