We wish to configure an Oracle 11g RAC with ASM setup for the internal employee training purpose. The requirement is as follows
1. Operating system Linux, Software Oracle 11g Release 2
2. Need to build total 5 individual clusters.
3. Each cluster with 2 Node
4. Need to configure ASM as a shared storage with real hardware. (No virtualization, Openfiler, NFS)
5. Need to configure RAC database.
provide me the hardware details for configuring Shared storage. Is there any specific Storage which we can use to configure ASM as a storage.
i want to configure my present Data Guard Setup with Enterprise Manager...and on the Enterprise Manager grid control page i am not seeing any Data Guard option.....i am using oracle 10gR2 and Windows XP.
How to use enterprise manager for configuring Data Guard.
I have a SAN Storage device of 8TB size . I am new to rac setup ,i dont know how to configure the SAN device for RAC SETUP on ASM..how to configure the SAN device for RAC setup on ASM
How many disks we need to have? which and sholud be on ASM ? how to impliment raid10 for database file disk and raid5 for arhcive log files
I'm trying to configure the patching setup in OEM(11g) and when I tried testing the connection to URL...., it errord out saying "Gateway timed out. Either you need to setup proxy or there is no process listening on the remote port".
How to configure Oracle EM with newly created Oracle Instance on Oracle 10g DB,which is Single Instance DB but not RAC ,when I start the Oracle EM it is starting the default DB which created during Oracle Server Installation.
I have installed oracle 10g in D drive . The installation says it is successful, without asking the database name or the password . I have followed the steps given in the attached file .
However it is not asking the database name or password ( no configuration set up is appearing for the user to interact with the system ) . So, after installation I can not give the username and password .
I am setting up a new production Oracle 11gr2 database on Windows 2008r2 server. I will have SAN(HP 3PAR) attach to the physical server. Here is my plan for diskLUN allocation:
1. 2 SAS disk in Raid1 for OS. 2. 2 SAS disk in Raid1 for Oracle database binary file. 3. 1 LUN for data file. (system, application, user table space) 4. 1 LUN for log file. 5. 1 LUN for temp. 6. 1 LUN for backup.
is this configuration OK? Does UNDO table space on separate LUN or it's OK to put it on data LUN?
I am trying to install Oracle 11g R2 on my Windows 7 Ultimate 64 bit. When I execute setup.exe as Administrator the command window flashes and exits. I could not even see what the message is. Also tried command prompt.
I am trying to create a rac setup on oracle 10.2. through NFS cluster configuration .i succeeded with the installtion of cluster configuarion and installation of oracle software ,but when i am trying to create database ,
I'm trying to setup ODBC connection for my Oracle client while installing BO. Following are the steps I followed.
1. Downloaded the Oracle Client from the link [URL] . From that downloaded two zip files. “Instant Client Package – Basic Lite" and “Instant Client Package – ODBC”. Extracted the Zip Files to the folder I created under C: as C:Oracleinstantclient_11_2.
2. Since I'm setting up in ODBC in windows 2008 64-bit R2. I was advised to install 32 bit . So in cmd prompt, from the location C:Oracleinstantclient_11_2, ran odbc_install.
3.Created the Environment variables as i) *TNS_ADMIN - C:Oracleinstantclient_11_2* ii) *Oracle_Home - C:Oracleinstantclient_11_2* iii) *Edited the PATH variable with ;C:Oracleinstantclient_11_2*
4. Created the tnsnames.ora file in C:Oracleinstantclient_11_2. Its content are as follows. clarity_dev = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = claritydev.vip.its.ebay.com )(PORT = 1521)) ) (CONNECT_DATA = (SID = clarity) ) )
5. From the folder %windir%sysWOW64odbacd32.exe, Opens ODBC Data Source Adminsitartor. In that I found my Oracle in instantclient_11_2 and added following details.
Data Source Name : claritydev.vip.its.com TNS Service Name : clarity_dev User Id: clarity1
When I test connect it, I get error *ORA-12154:* * TNS:could not resolve the connect identifier specified*
I've seen FAQs for this error, but couldn't find anything which solves. Is there any steps I'm missing? I've checked in DB properties. It uses SID not the Service Name.
I need to setup Oracle 11gR2 single node @ Linux RHat 5 64-bit for long performance tests, huge loads, high speeds, a lot of transactions, having a good scalability, etc.
It's not a production server, but for strong system/volume tests.
I have a scenario In which I have say 4 AQ in which I will post the message.Also i have say 2 database.I am planning to create an MDB which will poll on these AQ's, so whenever I post message the MDB will read it and perform a specific action.I believe I can create only one MDB per queue, if it is so then I have to create 8 MDB.
As there 2 datasource and 4 MDB. Is there any other way to handle this I mean without creating 8 MDB as the Data sources can increase to 10 to 20 so the number of MDB will be 20 to 40.I guess this will affect the application performance. Can I make some changes in application so that only few MDB's are required?
i am trying to install 2 node RAC on Oracle VMs. Before the installation during the -preinst check there were few issues which were resolved (ex user equivalence). After that during the installation process of the Grid it failed at step "Configure Oracle Grid Infrastructure for a cluster". After it failed at this step, subsequent steps too failed which I asked OUI to ignore and then I ran both the post installation scripts. And then ran post crsinst which failed. Pasting below the output of the root.sh script, post crsinst and other checks.
************************************* [root@bsfrac01 grid]# sh root.sh Running Oracle 11g root.sh script...
Enter the full pathname of the local bin directory: [/usr/local/bin]:
Copying dbhome to /usr/local/bin ... Copying oraenv to /usr/local/bin ... Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created.Finished running generic part of root.sh script.Now product-specific root actions will be performed.
2011-02-13 00:11:55: Parsing the host name 2011-02-13 00:11:55: Checking for super user privileges 2011-02-13 00:11:55: User has super user privileges
We have to configure Dataguard for our 24x7 critical banking 2 Node RAC database(10.2.0.4). Before proceeding with the configuration we have to make sure what steps we should follow to have minimum or no downtime.
1) Document covering DG setup in RAC environment. 2) We have to perform switchover as well so need its steps too. Either the normal switchover steps would be used or have to stop/start rac services as well.
We want to configure HSODBC on HP-UX 11.23 for Oracle Database 10g R2 in order to establish a DB link from Oracle to Netezza.We have installed the ODBC Drivers too..Currently we have not done any configurations and we go via an AIX box to establish a link.We want to get rid of the AIX box and instead establish directl link towards netezza from HP-UX Box.
Does Oracle support have some guidelines or steps to setup HSODBC on Oracle database 10g r2 residing on HP-UX 11.23 towards Netezza?
I need to configure a watchdog (or any other) utility which will constantly monitor database health. And if something goes wrong with the database, the utility should restart the DB instance.
I have 9i RDBMS Software and RHEL 4. I want to install a Oracle Names server. I install RDBMS.But Where I run netmgr and want to configure and start Oname server it says.
$ORACLE_HOME/bin/names file not exists.
How Can I configure OracleNames Server using Oracle 9i On Linux.
I want to setup Web based Discoverer 10g on Oracle EBsuite 12.1.1.Is there any way to do this without installing a separate Oracle Application Server 10g Home????.The EBsuite 12.1.1's Oracle Application Server version is 10.1.3.
I migrated a server + data + APEX application from 10g to 11g. Now my email sending is all messed up because of the ACL in 11g. I can't seem to figure out how to appease it. I have the smtp server correctly set in the parameters. Here is the procedure I'm trying to use (from [URL]):
CREATE OR REPLACE PROCEDURE send_email( pFromUser IN VARCHAR2, pToUser IN VARCHAR2, pSubject IN VARCHAR2 DEFAULT NULL, pBody IN VARCHAR2 DEFAULT NULL)
I wanted to setup a two node 11g RAC with ASM at my home for learning purpose. I have read many documents to configure shared storage using NFS, Openfiler, VMsetup etc. Is there any hardware available (something like maxtor disk) which is not much expensive to setup a shared storage ?
I have a dataguard setup, a primary and a standby.my instance is testdb.i have set all necessary dataguard parameters and everything seemed to work well initially with logs being moved from primary to secondary and being applied there.but all of a sudden i see that the primary pushes logs to the standby and at the standby end these logs are available but not applied.
when i try to execute the: alter database recover managed standby database cancel; it hangs for a long time and never returns to sql prompt.
i bascially want to stop and restart the MRP process to apply the logs but cannot cancel the managed recover mode.Is it advisable to kill the mrp process at os level using "kill -9 "?
