I have a dataguard setup, a primary and a standby.my instance is testdb.i have set all necessary dataguard parameters and everything seemed to work well initially with logs being moved from primary to secondary and being applied there.but all of a sudden i see that the primary pushes logs to the standby and at the standby end these logs are available but not applied.
when i try to execute the: alter database recover managed standby database cancel; it hangs for a long time and never returns to sql prompt.
i bascially want to stop and restart the MRP process to apply the logs but cannot cancel the managed recover mode.Is it advisable to kill the mrp process at os level using "kill -9 "?
I have setup 11g Dataguard - physical standby. Everything seems to be fine. I have also tested switchover and failover using DG broker which seems to work fine.All, I would like to know is abt ORA-01109 during switchover..
DGMGRL> SWITCHOVER TO TEST_stby; Performing switchover NOW, please wait... New primary database "TEST_stby" is opening... Operation requires shutdown of instance "TEST1" on database "TEST_prim" Shutting down instance "TEST1"... ORA-01109: database not open [code].....
This ORA error occurs when it tries to shut down primary. When primary is in open state, why its saying that database not open. Operation requires shutdown of instance "TEST1" on database "TEST_prim"..Shutting down instance "TEST1"..
i have configured physical standby in my local system, to check logshipping i created a table at primary db, wen i tried to check in standby, it says table does not exist..below are primary & standby alert entries..
Primary alert log
Fatal NI connect error 12514, connecting to: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.0.98)(PORT=1522))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=STAND)(SERVER=dedicat ed)(CID=(PROGRAM=d:oracle11gappadministratorproduct11.1.0db_1inORACLE.EXE)(HOST=A960M)(USER=SYSTEM))(SERVER=dedicated))) VERSION INFORMATION: TNS for 64-bit Windows: Version 11.1.0.6.0 - Production
I am using RAC to RAC data guard environment. Os hp-unix. during primary(old standby) to standby(old primary) switchover I am ussing:
SQL>ALTER DATABASE COMMIT TO SWITCHOVER TO PHYSICAL STANDBY WITH SESSION SHUTDOWN;
I have 11.2.0.1 environment with standby and when performing switch over - it was hanging for more than 2 hours and i had to cancel it. This is what all i see in the database alert.log:
Errors in file /u02/app/oracle/diag/rdbms/drpdb/drpdb1/trace/drpdb1_m000_15160.trc: ORA-01155: the database is being opened, closed, mounted or dismounted Thu Apr 04 17:44:03 2013 Errors in file /u02/app/oracle/diag/rdbms/drpdb/drpdb1/trace/drpdb1_m000_15780.trc: ORA-01155: the database is being opened, closed, mounted or dismounted Thu Apr 04 17:59:03 2013 Errors in file /u02/app/oracle/diag/rdbms/drpdb/drpdb1/trace/drpdb1_m001_16373.trc:
[code]....
ORA-01155: the database is being opened, closed, mounted or dismounted.
I have two Oracle 10.2.0.4 databases, on two SUN M5000 (Solaris 5.10). One is primary (EXP1), the other is the standby (EXPBKP). Both SID is 'EXP'. If I do a manual recover (after I sync'ed primary archive logs from primary to standby), it works. If I do a manual log switch, logs are shipped AND applied on the standby. But after a while, I can see some errors on primary alert log , and logs are not shipped anymore :
CODE Errors in file /applications/oracle/admin/EXP/bdump/exp_arc2_1277.trc: ORA-03135: connection lost contact Tue Oct 26 08:30:14 2010 FAL[server, ARC3]: FAL archive failed, see trace file. Tue Oct 26 08:30:14 2010 Errors in file /applications/oracle/admin/EXP/bdump/exp_arc3_1279.trc: ORA-16055: FAL request rejected ARCH: FAL archive failed. Archiver continuing [code]....
1) The Primary Database is UP. The Physical Stand By Database is DOWN. The Current Archive Log Sequence is 99 in Primary.
We have to apply Archive Log from 51 to 99 to the Standby Database. But Unfortunately, there is no backup of those Archivelogs and the ArchiveLogs from 51 to 98 have got deleted at Primary end.
Now how will you apply these Archive Logs from Primary Database to Physical Standby Database?
In DR site. i have to clone the database from pshysical standby database and clone db will be normal db not standby. Is it possible to do rman duplicate from active dataguard? will it support the duplicate database from active database or i have to take the rman backup of standby database and duplicate from backup piece.
Can i setup physical standby without RMAN? I want to create a fresh single physical standby without RMAN .. If i copy all files in another system and take the controlfile from primary as alter database create controlfile for standby ... and fill all the gaps with archives.. Should it work ? i am on 10G Rhel 4 linux.. and both machines would have same config
we are getting below error on alert log file in logical standby database from May 2013 how can find time of sequence creation and how can restore these sequence redo files and sysnc databases primary and standby
Snipped of alert log: Wed Jun 10 15:29:40 2013 Fetching gap sequence in thread 1, gap sequence 62079-62178 Wed Jun 10 15:29:50 2013 Fetching gap sequence in thread 1, gap sequence 62079-62178 Wed Jun 10 15:30:01 2013 Fetching gap sequence in thread 1, gap sequence 62079-62178
I'd like to know the Standby hostname and database name (db_unique_name) from primary using SQL. Simply put, which table in primary datbase gives us the standby host and the database name. I am aware that TNSNAMES.ORA contains details, but we cannot use SQL for that. I am also aware of V$ARCHIVED_LOG's DEST_ID column. But, the DEST_ID will not show the host and the db names, neither does V$PARAMETER's LOG_ARCHIVE_DEST_n if SERVICE parameter is set to Connect Identifier.
If I further paraphrase my problem, how I'd relate a dest_id to a standby host and database using SQL.
SELECT <columns> FROM <v$some_view> WHERE dest_id IN (2, 3);
DEST_ID HOST_NAME DATABASE_NAME -------------------------------------------------------- 2 host2 standby_1 3 host3 standby_2DB version : 10g OS : Solaris 10
I was using physical standby but my primary database had had some HW issue.So I had activated standby database to handle production.During 3 months, standby database was our live database and our old primary was unavailable.Now HW issue on primary has been fixed.And I want to set again my old configuration : means set primary and standby db.
I did standby before and it works wighout any disturbations and even configuration seems to me not very complicated - but it was before. now i am trying to do standby configuration once again. there is database named DESK.
two physical serwers: sczepl-db07 - primary r00979 - standby
on each for this serwer there is listener listening on port 1521, and on each is tnsnames configured properly:
I have one primary database and one physical standby database on my data guard environment.
Now i want one more physical standby database in my data guard environment, meaning i want 2 physical standby. since this is a production environment, i need to take great care. However, downtime will be mandatory.
[u]init.ora for production:[/u]
pup2.__db_cache_size=6241124352 pup2.__java_pool_size=33554432 pup2.__large_pool_size=134217728 pup2.__oracle_base='/oracle/app/oracle'#ORACLE_BASE set from environment pup2.__pga_aggregate_target=5771362304 [code]......
init.ora for my first primary standby
pup2.__db_cache_size=6509559808 pup2.__java_pool_size=33554432 pup2.__large_pool_size=67108864 pup2.__oracle_base='/oracle/app/oracle'#ORACLE_BASE set from environment pup2.__pga_aggregate_target=5502926848 [code].......
I have a primary and standby DB using data guard 10.2.0.3.I want to upgrade oracle to 11G.I know that primary and standby should have same version even if data guard will not work again.I want to know what is the steps by steps action to properly upgrade both DB : primary and Standby.
Brand new box, and I installed 11.1.0.6 (software only)
I have a brand new box set-up for a single-instance standby database, and I have installed 11.1.0.6 software only.
Do I need to patch 11.1.0.6 to 11.1.0.7 before I send a copy of the primary over to be set-up as a standby? If so, how do I patch 11.1.0.6 without having a local database in place as this server will only be used for a standby? Can patching the oracle_home only be done?
i have a db's in maximum protection mode and i am trying to perform a switchover of physical standby database to primary role. but it failed., the steps followed is as follows. everything is fine with old primary site and the it is now in mounted state. When I went through the log file, I got the error message as "ORA-16072: a minimum of one standby database destination is required".the standby_archive_dest is as follows.
old primary database
SQL> alter system switch logfile; SQL> alter system archive log current;
old standby database...Disconnect the managed recovery mode in Standby database.
SQL> recover managed standby database cancel; Media recovery complete. SQL> recover standby database; AUTO SQL> exit [code]....
We have a primary and a standby (Physical Dataguard) site.
1. How do i check if the database is encrypted or not on primary as well as standby ? 2. If primary and standby are encrypted, does the data that gets replicated from primary to standby also in encrypted form ? If not, does it make sense to encrypt that ?
(Oracle 11gR1 OEL 5)Is there any possibility to convert snapshot database (standby) directly to Primary. Instead of manual switchover I want to do this
I have checked that snapshot creates a guaranteed restoration point which reverts back changes in Standby.
I want to know if there is any reflection on the standby database states when it's primary is down or not reachable? I want to use this information from standby node to determine if I can programmatically execute (dgmgrl) failover operation or not? This is considering that the broker configuration has no fast-start failover and no observer enabled/configured.
I have a requirement to change the instance parameter of the primary database and standby in the data guard. Any procedure to do the same. I have to do it directly on production and there is no test set up so I cannot experiment . The procedure I am thinking of is as below.
1. Stop the standby
2. backup the primary
3. Change the parameter and restart to make it effective
4. Start the primary
5. Go to stand by
6. Change the parameter and mount the database.
7. Check if both are in sync and apply logs if not.
I am using oracle 10g with data guard configured , I have primary ( A ) and standby database ( B ) .But because of some unavoidable conditions the primary database ( A ) got shutdown and was not starting , We shifted the standby database ( B ) at new location and changed it to primary with following command ,
startup mount; alter database recover managed standby database finish; alter database commit to switchover to physical primary; shutdown; startup;
This new primary ( B ) was open for end users for 2 days during which old primary ( A ) was shutdown .
I took the backup of ( B ) and restored it on A AND shutdown the B . Now A is acting as Primary database. Server B is shutdown . I want to change server B to standby database with A running as Primary .Is it possible ?
The customer wants the RMAN recovery catalog database to be highly available so that none of the RMAN database backup jobs are impacted at the time of taking the database backups. There are are 200+ databases running on OEL, RHEL and Windows. So we planned to host the recovery catalog database on Oracle Active DataGuard 11.2.0.1 Enterprise Edition on RedHat EL 5.8 version on two physical servers.
The Primary Instance will be in one server in the Primary DC and the Standby Instance will be on another server in another DC. Also all the database datafiles are hosted in ASM Diskgroups on SAN (DATA, FRA, REDO, ARCH diskgroups). Are there any specific RPM/patch/OS user custom/specific settings or configurations needed..?
I am using Oracle RAC 11.2.0.3 as primary database, we are going to start using Oracle data guard. So I am designing my infrastructure and planing to use Oracle 11.2.0.3 Single instance as my physical stand by database.
My question is it feasible to have my standby database as single instance while the primary is RAC? is it feasible to build my Oracle single instance standby database from the RMAN backup of the RAC primary database? Is there any restrictions (or any points to be taken into consideration) since my primary database is RAC while the physical standby is Oracle single instance?
in the below link
[URL].......
it was mentioned that primary can be RAC or single and same for standby, but my question is it feasible to have primary as RAC while standby as single instance? or it should be like each others?
The primary database can be either a single-instance Oracle database or an Oracle Real Application Clusters (RAC) database. Similar to a primary database, a standby database can be either a single-instance Oracle database or an Oracle RAC database.
If flashback is enable in physical standby database 1. If we failover at 11AM can I flash back NEW primary database to 6 AM ? 2. if I convert physically standby database to snapshot standby database at 11AM , Can I flashback snapshot standby database to 6 AM and do some works on it (DML operations) then converting the snapshot standby database into physical standby database ?
