i mean can i write a trigger to prevent shutdown in certain time.
create or replace trigger trig1 before shutdown on database begin if to_char(sysdate,'hh24') <16 then 'what is the right thing to do here?'
I issued a SHUTDOWN IMMEDIATE command on my database and for over 2 hours and got no response. I did this because I wanted to restart the database due to many hanging sessions which had led to high CPU usage on the server by oracle process.
Oracle Service<dbname> instance using the Windows Services screen which failed with an error 1053 message. At the same time I got an ORA-01013 message saying user requested cancel of operation. See below:
SQL> SHUTDOWN IMMEDIATE
ORA-01013: user requested cancel of current operation
SQL> SHUTDOWN IMMEDIATE
ORA-01089: immediate shutdown in progress - no operations are permitted
SQL> SHUTDOWN ABORT
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
What I want to know is how do I proceed? Also how do I check to see the status of the Shutdown operation?
We have 2 Unix SunOS server, named as SUNOS01 and SUNOS02, there is some space need to add in SUNOS02 and for that I have to bring Database down on SUNOS02. When I checked I found that the DB is pointing to SUNOS01, i.e. there is no DB on SUNOS02, So, Do I required to shutdown the DB on SUNOS01 or it is not required to do anything from Database side. I mean to say should I ask Unix team to bring down the unix server and add the space.Also, if DB shutdown is not required then what I have to do afetr they have added space and bring the server up from DB side.
View 4 Replies View RelatedI was monitoring a database job to collect statistics, it was scheduled using DBMS_JOBS..I found that it was running during business hours so i got the session ID of the job using;
select sid from dba_jobs_running where job=11;
I then i killed the job using;
select serial# from v$session where sid =232;
alter system kill session '232, 10852';
select sid from dba_jobs_running where job=11;
no rows selected...After some time i again fired the same command
select sid from dba_jobs_running where job=11;
SID
----------
232
and found that the same job is again running..This behavior was repeated again N again. i have attached the spool file for the same...
what could be the reason that the job is starting all over again even after killing the session and what should be done to stop it..I understand that once the database shuts down and if the job is still running then it will restart once the database is up..In this case, Should i remove the job and re submit it again..
I recently installed Oracle 10g on my windows Xp laptop. It has become considerably slow since then. I want to start the database server only when I need it, and not every time I start my laptop. I looked around in OEM and did found a way.
View 5 Replies View RelatedWe are unable to drop user due to below error, how to drop the below user without shutdown the database.
SQL> drop user mvm_2010 cascade;
drop user mvm_2010 cascade
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-14452: attempt to create, alter or drop an index on temporary table already in use
No session was available for particular user.
Find an appropriate script to automate Oracle DBs in one server? This db server have 6 instances. We always done the starting up and shutting down manually, although we have a reference script that does this but in Oracle v7.3.4. We do want to include the automatic start/stop of dbconsole for accessing it via OEM.
View 1 Replies View RelatedI am working on a assignment, How to prevent duplication with Trigger. I create following compound trigger for this, but it is not doing so.
CREATE OR REPLACE TRIGGER CHK_DUPLICATION FOR INSERT ON TST COMPOUND TRIGGER
R_BCOUNT NUMBER;
R_ACOUNT NUMBER;
D_VAL NUMBER;
BEFORE STATEMENT IS
BEGIN
[code].....
I have installed oracle 11g Release 11.1.0.1 on windows server 2008.I access this server from a client machine running on winXP through SQL PLUS. I wanted to shutdown and start DB server from this client machine. Accordingly i issued shutdown immediate command from SQLPLUS.
Now when i tried to start the DB with "STARTUP NOMOUNT" command i received error 12514. I understand this error means that the listener received a request to establish connections to a database but since DB services are not up and running, hence the error. So my first question is how do I resolve this error.
Continuing further, i tried to re-connect to the database as sys, and i received another error ORA-01041. So, my second question is why did i receive this error and again how can i resolve it
may be you can point me to relevant reference in Oracle documentation) how can i start and stop oracle from a client machine using SQL interface in CLI mode and windows environment and avoid this error.
I want to shutdown the database using shutdown immediate and startup the database using startup mount.
1.)My system is client system if I connect start--> program -->Accessories --> communication --> Remote Desktop connection (connect server system) , open Run type cmd after
Shutdown immediate (database is shutdown)
Startup mount (database is mounted no problem it's working fine)
2.) But if I, open Run type cmd in client system If I run same command, I'm getting below error (ORA-12560: TNS:protocol adapter error).
C:>set oracle_sid=dbadb
C:>sqlplus / as sysdba
SQL*Plus: Release 10.1.0.2.0 - Production on ╘± ╠ß± 31 18:09:27 2009
Copyright (c) 1982, 2004, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
[code].....
3. If I run same command in Sql Plus I'm getting below error(ORA-12514: TNS:listener does not currently know of service requested in connect descriptor).
SQL*Plus: Release 10.1.0.2.0 - Production on Ôñ Ìáñ 31 18:23:13 2009
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
[code].....
When i am trying to shutdown the database it is not recognising it.It is giving error.
SQL>shutdown immediate unknown command beginning "shutdown i..." - rest of line ignored.
I am passing this command on Sql prompt.So i don't think problem in setting ORACLE_BASE,ORACLE_SID.
I am upgrading a DB using catupgrd.sql, and one of the prerequisites is to shut down the listener. Now, I have multiple database instances registered with this listener, and I don't want the other ones to become unavailable while I do the upgrade. Is there any way to do this for a particular instance only?
View 9 Replies View RelatedWhen I am trying to connect to sql from scott or any other user i am getting this error message ,
ORA-01033: ORACLE initialization or shutdown in progress
I have been getting this error message for 4 four days . Butt when i am trying to connect from SYS user it connects successfully ,but when i do query it gives me following error message .
ORA-01219: database not open: queries allowed on fixed tables/views only
I shutdown Database from SYS user ,and start it again .But at startup it gives me following error message .
ORA-00204: error in reading (block 3, # blocks 8) of control file
ORA-00202: control file: 'D:ORACLEPRODUCT10.2.0ORADATAORCLCONTROL03.CTL'
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 23) Data error (cyclic redundancy check).
I found in alert log that PMON "failed to acquire latch" during shutdown.What it means and how to rectify the same.
View 2 Replies View Relatedwhen i am using sql prompt and enter username and password scott and tiger it is giving error ORA-01033 oracle initialization or shutdown in progress.
View 9 Replies View RelatedI have oracle 10g as well as oracle 8i on my server. currently we are using oracle 10g. now we get the following error when we try to connect to oracl 10g database.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsomni>cd
C:>sqlplus
olog
The system cannot find the path specified.
C:>sqlplus/nolog
SQL*Plus: Release 8.1.5.0.0 - Production on Tue May 15 16:39:13 2012
(c) Copyright 1999 Oracle Corporation. All rights reserved.
SQL> connect sys/admin as sysdba
Connected to an idle instance.
SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup nomount;
LRM-00109: could not open parameter file 'D:oro8iDATABASEINIT.ORA'
ORA-01078: failure in processing system parameters
The location of pfile of oracle 10g database is c:/oracle/product/10.0.0.1/admin/pfile.
We have changed the SYSDATE to 03-FEB-1994 in our AIX machine where oracle11g database is running. Once the sysdate is changed db and listner are getting down immediately and its generating the core in $ORACLE_HOME/dbs
This AIX machine is for PT test and as per one requirement we are changing the sysdate. Moreover, we found that database is getting down if we change the sysdate till 1999. If we change the sysdate to 2000, then we are not seeing any issue.
Below point is for additional info. After changing the sysdate and trying to connect to the db user, we are getting the below issue.
$ sqlplus '/as sysdba'
Segmentation issue (Core dump)
I searched the knowledge base here and in other forums and haven't found the answer. There was a similar condition presented earlier, but it turned out the resolution was to run the >shutdown/>startup on the server rather than from a client. Not applicable in my case!
Shutdown and startup called used to work with 9i, now startup fails in 10g. ORACLE_HOME and ORACLE_SID are set and report correct values. What is different in 10g that the script (shown below) now throws a TNS listener error after shutdown?
I successfully upgraded from 9i to 10g (10.2.0.5.0) on Windows Server 2003, 32-bit last weekend. Now our backup_script.bat and oracle_stop_start.sql throw "ORA-12514: TNS:listener does not currently know of service requested in the connect descriptor"
This batch file and sql script predate me and worked with 9i for years. Now the startup command in the oracle_stop_start throws this error after executing shutdown. The backup batch file calls:
sqlplus "system/manager@wind as sysdba" @D:ptcwindchillackupsoracle_stop_start
The entire oracle_stop_start.sql is as follows:
shutdown immediate;
startup open;
quit
What is different in 10g that this now doesn't work? Shutdown works, but it will not startup due to the listener error. I have made the backups work by commenting out the call to sqlplus and I'm getting good backup dumps.
In my virtual image of the server I have found that I can duplicate the error after >shutdown. I have found that if I exit sql*plus and go back in as follows I can get the database instance to restart from the command line:
c:>sqlplus /nolog
sql>connect sys/* as sysdba
sql>startup open wind;
That does start, mount and open the database instance.
Is there a better way to be making sure that everything is stopped before executing the >exp command to create a backup dump? I will look into and test datapump export/import and RMAN for creating the backups, after I get this working again.
why this worked in sql*plus in 9i but not in 10g? Can I make TNS Listener smarter? Change or add variables to the startup command?
My database was working fine and now I am not able to login and getting the error:-
"ORA-01033: ORACLE initialization or shutdown in progress"
I have done the below steps:
SQL> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> STARTUP
ORA-32004: obsolete and/or deprecated parameter(s) specified
[code]....
i install oracle 10g on linux on perform the following step but my database is not auto start with the machine
Automatic startup and shutdown oracle on linux Oracle database server provides two scripts to configure automatic database startup and shutdown process.
The scripts are,
$ORACLE_HOME/bin/dbstart
$ORACLE_HOME/bin/dbshut
Now let's look at unix level script. When a unix machine boots it runs scripts beginning with Snnname in /etc/rc3.d.
-Here the number nn indicates the order in which these scripts will be run. The name just indicates the function of the script.
In the same way shutdown scripts are named as Knnname which are run from /etc/rc0.d.
If we want that Oracle is the last program that is automatically started, and it is the first to be shutdown then we will name the startup and shutdown scripts on OS like /etc/rc3.d/S99oracle and /etc/rc0.d/K01oracle respectively.
The database script dbstart and dbora will be called from OS script /etc/rc3.d/S99oracle and /etc/rc0.d/K01oracle respectively.
Note that dbstart and dbshut take each SID, in turn, from the /etc/oratab file and startup or shutdown the database.
Automate Startup/Shutdown of Oracle Database on Linux
Step 01: Be sure that oratab file is correct and complete.
Check for oratab file either in /etc/oratab or in /var/opt/oracle/oratab.
Database entries in the oratab file have the following format:
$ORACLE_SID:$ORACLE_HOME:Y
Here Y indicates that the database can be started up and shutdown using dbstart/dbshut script.
If in my database there is two database named arju and arjudup then my oratab file will contain the entry like,
arju:/var/opt/oracle/product/10.2.0/db_1:Y
arjudup:/var/opt/oracle/product/10.2.0/db_1:Y
where /var/opt/oracle/product/10.2.0/db_1 is the $ORACLE_HOME of my database.
Step 02: Create a script to call dbstart and dbshut. In this example I will create one script that will do both startup and shutdown operation. I will name this script as dbora and will be placed in '/etc/init.d'.
a) Login as root.
b) Change directories to /etc/init.d
c) Create a file called dbora and chmod it to 750.
# touch dbora
# chmod 750 dbora
d)Edit the dbora file and make the contents of it like below.
[Code].....
How can prevent DBA user from disabling any trigger ? suppose DBA user can't be able to execute following command
ALTER TRIGGER {trigger_name} DISABLE;
how can i protect it?
The Database is Shutdown, no user is complaining about it and also you are not monitoring it through alert log file, then how will you, as a DBA, come to know about it?
View 2 Replies View RelatedColumn Trigger_body in table user_trigger is long data type.I want to find out the certain 'table name' was using intrigger.
Below is my sql statement:
select trigger_name
from user_triggers
where TRIGGER_BODY like '%tb_test%' or TRIGGER_BODY like '%TB_TEST%';
then it show me a error :
where TRIGGER_BODY like '%tb_test%'
*
ERROR at line 3:
ORA-00932: inconsistent datatypes
I had set long 32767 before execute above statement
We are having a problem trying to automate our 11g database startup on a Linux Platform (Redhat). This is the procedure we followed.
1. Logged in as the root user.
2. Edited the oratab file for the platform.
vi /etc/oratab
db:/u01/app/oracle/product/11.2.0/dbhome_1:Y
3. Create a file called dbora in /etc/init.d directory
4. Entered the following in dbora:
#! /bin/sh -x
#
# Change the value of ORACLE_HOME to specify the correct Oracle home
# directory for your installation.
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
[Code] .....
4. Changed permissions of dbora
chgrp dba dbora
chmod 750 dbora
5. Created symbolic links to the dbora script in the appropriate run-level script directories:
# ln -s /etc/init.d/dbora /etc/rc.d/rc0.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora
Have I covered everything needed? At system restart the listener and database fail to startup as expected.
Any example of database startup event and database shutdown event?
View 2 Replies View Relatedwe have scheduled cold backup for our database. is there any solution to resolve below mentioned errors other than RMAN hot backup or shutdown abort ?
Sat Jan 26 00:20:55 2013
Active call for process 3939 user 'oracle' program 'oracle@proddb.fgho.com'
SHUTDOWN: waiting for active calls to complete.
Sat Jan 26 01:15:59 2013
SHUTDOWN: Active sessions prevent database close operation
Instance shutdown aborted
I have configured data Guard on oracle 11gR2. It is working fine. The only issue i am facing is that when i am stopping the database on the primary server, it is taking a long long time to down the database.
Is it normal?
Furthermore, regarding backup i used veritas Netbackup to perform hotbackup. Can i still used the same principle.
i am installing oracle database 8.1.7 on dell server power edge 2650 first time database successfully installed but when i want to crate new database by Database Configuration Assistant it is not working for new database creation.
View 1 Replies View Relatedi am trying to install Oracle 10.10.2.0 on Windows Server 2003 standard x64 Edition Service Pack, but when i try to run the installer or open DVD it gives me below error.
"The image file D: is Valid, but is for a machine type other than the current machine."
I have to migrate production database version 10gR2 on windows 2003 server to oracle 11gR2 on windows 2008 server . So far i have just installed the oracle software on 64bit windows 2008 server. How to move the data or migrate from old server to new server .
View 22 Replies View Related