Server Administration :: Oracle Server Shutdown
Apr 1, 2012
We have changed the SYSDATE to 03-FEB-1994 in our AIX machine where oracle11g database is running. Once the sysdate is changed db and listner are getting down immediately and its generating the core in $ORACLE_HOME/dbs
This AIX machine is for PT test and as per one requirement we are changing the sysdate. Moreover, we found that database is getting down if we change the sysdate till 1999. If we change the sysdate to 2000, then we are not seeing any issue.
Below point is for additional info. After changing the sysdate and trying to connect to the db user, we are getting the below issue.
$ sqlplus '/as sysdba'
Segmentation issue (Core dump)
View 3 Replies
ADVERTISEMENT
Jun 29, 2011
I recently installed Oracle 10g on my windows Xp laptop. It has become considerably slow since then. I want to start the database server only when I need it, and not every time I start my laptop. I looked around in OEM and did found a way.
View 5 Replies
View Related
Aug 18, 2008
When i am trying to shutdown the database it is not recognising it.It is giving error.
SQL>shutdown immediate unknown command beginning "shutdown i..." - rest of line ignored.
I am passing this command on Sql prompt.So i don't think problem in setting ORACLE_BASE,ORACLE_SID.
View 24 Replies
View Related
Oct 14, 2010
When I am trying to connect to sql from scott or any other user i am getting this error message ,
ORA-01033: ORACLE initialization or shutdown in progress
I have been getting this error message for 4 four days . Butt when i am trying to connect from SYS user it connects successfully ,but when i do query it gives me following error message .
ORA-01219: database not open: queries allowed on fixed tables/views only
I shutdown Database from SYS user ,and start it again .But at startup it gives me following error message .
ORA-00204: error in reading (block 3, # blocks 8) of control file
ORA-00202: control file: 'D:ORACLEPRODUCT10.2.0ORADATAORCLCONTROL03.CTL'
ORA-27091: unable to queue I/O
ORA-27070: async read/write failed
OSD-04006: ReadFile() failure, unable to read from file
O/S-Error: (OS 23) Data error (cyclic redundancy check).
View 9 Replies
View Related
Jul 1, 2010
when i am using sql prompt and enter username and password scott and tiger it is giving error ORA-01033 oracle initialization or shutdown in progress.
View 9 Replies
View Related
Aug 20, 2010
My database was working fine and now I am not able to login and getting the error:-
"ORA-01033: ORACLE initialization or shutdown in progress"
I have done the below steps:
SQL> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> STARTUP
ORA-32004: obsolete and/or deprecated parameter(s) specified
[code]....
View 10 Replies
View Related
Sep 21, 2010
I have installed oracle 11g Release 11.1.0.1 on windows server 2008.I access this server from a client machine running on winXP through SQL PLUS. I wanted to shutdown and start DB server from this client machine. Accordingly i issued shutdown immediate command from SQLPLUS.
Now when i tried to start the DB with "STARTUP NOMOUNT" command i received error 12514. I understand this error means that the listener received a request to establish connections to a database but since DB services are not up and running, hence the error. So my first question is how do I resolve this error.
Continuing further, i tried to re-connect to the database as sys, and i received another error ORA-01041. So, my second question is why did i receive this error and again how can i resolve it
may be you can point me to relevant reference in Oracle documentation) how can i start and stop oracle from a client machine using SQL interface in CLI mode and windows environment and avoid this error.
View 12 Replies
View Related
Dec 16, 2012
I issued a SHUTDOWN IMMEDIATE command on my database and for over 2 hours and got no response. I did this because I wanted to restart the database due to many hanging sessions which had led to high CPU usage on the server by oracle process.
Oracle Service<dbname> instance using the Windows Services screen which failed with an error 1053 message. At the same time I got an ORA-01013 message saying user requested cancel of operation. See below:
SQL> SHUTDOWN IMMEDIATE
ORA-01013: user requested cancel of current operation
SQL> SHUTDOWN IMMEDIATE
ORA-01089: immediate shutdown in progress - no operations are permitted
SQL> SHUTDOWN ABORT
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
What I want to know is how do I proceed? Also how do I check to see the status of the Shutdown operation?
View 1 Replies
View Related
Apr 24, 2011
We have 2 Unix SunOS server, named as SUNOS01 and SUNOS02, there is some space need to add in SUNOS02 and for that I have to bring Database down on SUNOS02. When I checked I found that the DB is pointing to SUNOS01, i.e. there is no DB on SUNOS02, So, Do I required to shutdown the DB on SUNOS01 or it is not required to do anything from Database side. I mean to say should I ask Unix team to bring down the unix server and add the space.Also, if DB shutdown is not required then what I have to do afetr they have added space and bring the server up from DB side.
View 4 Replies
View Related
Apr 1, 2009
I want to shutdown the database using shutdown immediate and startup the database using startup mount.
1.)My system is client system if I connect start--> program -->Accessories --> communication --> Remote Desktop connection (connect server system) , open Run type cmd after
Shutdown immediate (database is shutdown)
Startup mount (database is mounted no problem it's working fine)
2.) But if I, open Run type cmd in client system If I run same command, I'm getting below error (ORA-12560: TNS:protocol adapter error).
C:>set oracle_sid=dbadb
C:>sqlplus / as sysdba
SQL*Plus: Release 10.1.0.2.0 - Production on ╘± ╠ß± 31 18:09:27 2009
Copyright (c) 1982, 2004, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
[code].....
3. If I run same command in Sql Plus I'm getting below error(ORA-12514: TNS:listener does not currently know of service requested in connect descriptor).
SQL*Plus: Release 10.1.0.2.0 - Production on Ôñ Ìáñ 31 18:23:13 2009
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
[code].....
View 14 Replies
View Related
Jan 15, 2013
i mean can i write a trigger to prevent shutdown in certain time.
create or replace trigger trig1 before shutdown on database begin if to_char(sysdate,'hh24') <16 then 'what is the right thing to do here?'
View 3 Replies
View Related
May 17, 2013
I am upgrading a DB using catupgrd.sql, and one of the prerequisites is to shut down the listener. Now, I have multiple database instances registered with this listener, and I don't want the other ones to become unavailable while I do the upgrade. Is there any way to do this for a particular instance only?
View 9 Replies
View Related
Aug 8, 2010
I was monitoring a database job to collect statistics, it was scheduled using DBMS_JOBS..I found that it was running during business hours so i got the session ID of the job using;
select sid from dba_jobs_running where job=11;
I then i killed the job using;
select serial# from v$session where sid =232;
alter system kill session '232, 10852';
select sid from dba_jobs_running where job=11;
no rows selected...After some time i again fired the same command
select sid from dba_jobs_running where job=11;
SID
----------
232
and found that the same job is again running..This behavior was repeated again N again. i have attached the spool file for the same...
what could be the reason that the job is starting all over again even after killing the session and what should be done to stop it..I understand that once the database shuts down and if the job is still running then it will restart once the database is up..In this case, Should i remove the job and re submit it again..
View 8 Replies
View Related
Aug 29, 2010
I found in alert log that PMON "failed to acquire latch" during shutdown.What it means and how to rectify the same.
View 2 Replies
View Related
Apr 19, 2013
We are unable to drop user due to below error, how to drop the below user without shutdown the database.
SQL> drop user mvm_2010 cascade;
drop user mvm_2010 cascade
*
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-14452: attempt to create, alter or drop an index on temporary table already in use
No session was available for particular user.
View 19 Replies
View Related
May 16, 2012
I have oracle 10g as well as oracle 8i on my server. currently we are using oracle 10g. now we get the following error when we try to connect to oracl 10g database.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and Settingsomni>cd
C:>sqlplus
olog
The system cannot find the path specified.
C:>sqlplus/nolog
SQL*Plus: Release 8.1.5.0.0 - Production on Tue May 15 16:39:13 2012
(c) Copyright 1999 Oracle Corporation. All rights reserved.
SQL> connect sys/admin as sysdba
Connected to an idle instance.
SQL> shutdown abort;
ORACLE instance shut down.
SQL> startup nomount;
LRM-00109: could not open parameter file 'D:oro8iDATABASEINIT.ORA'
ORA-01078: failure in processing system parameters
The location of pfile of oracle 10g database is c:/oracle/product/10.0.0.1/admin/pfile.
View 5 Replies
View Related
Jan 12, 2011
I searched the knowledge base here and in other forums and haven't found the answer. There was a similar condition presented earlier, but it turned out the resolution was to run the >shutdown/>startup on the server rather than from a client. Not applicable in my case!
Shutdown and startup called used to work with 9i, now startup fails in 10g. ORACLE_HOME and ORACLE_SID are set and report correct values. What is different in 10g that the script (shown below) now throws a TNS listener error after shutdown?
I successfully upgraded from 9i to 10g (10.2.0.5.0) on Windows Server 2003, 32-bit last weekend. Now our backup_script.bat and oracle_stop_start.sql throw "ORA-12514: TNS:listener does not currently know of service requested in the connect descriptor"
This batch file and sql script predate me and worked with 9i for years. Now the startup command in the oracle_stop_start throws this error after executing shutdown. The backup batch file calls:
sqlplus "system/manager@wind as sysdba" @D:ptcwindchillackupsoracle_stop_start
The entire oracle_stop_start.sql is as follows:
shutdown immediate;
startup open;
quit
What is different in 10g that this now doesn't work? Shutdown works, but it will not startup due to the listener error. I have made the backups work by commenting out the call to sqlplus and I'm getting good backup dumps.
In my virtual image of the server I have found that I can duplicate the error after >shutdown. I have found that if I exit sql*plus and go back in as follows I can get the database instance to restart from the command line:
c:>sqlplus /nolog
sql>connect sys/* as sysdba
sql>startup open wind;
That does start, mount and open the database instance.
Is there a better way to be making sure that everything is stopped before executing the >exp command to create a backup dump? I will look into and test datapump export/import and RMAN for creating the backups, after I get this working again.
why this worked in sql*plus in 9i but not in 10g? Can I make TNS Listener smarter? Change or add variables to the startup command?
View 2 Replies
View Related
Jun 24, 2010
Find an appropriate script to automate Oracle DBs in one server? This db server have 6 instances. We always done the starting up and shutting down manually, although we have a reference script that does this but in Oracle v7.3.4. We do want to include the automatic start/stop of dbconsole for accessing it via OEM.
View 1 Replies
View Related
Apr 8, 2010
My manager is asking to create a SQL scrip, which will provide following information.
Our database is 9.2.0.7.0 on Windows 2000 Server
-How many records Insert / Update or Delete daily in my Oracle database?
- Check Archive log / Redo Log switching information?
-Check database growth ?
View 10 Replies
View Related
Jan 11, 2011
i am trying to install Oracle 10.10.2.0 on Windows Server 2003 standard x64 Edition Service Pack, but when i try to run the installer or open DVD it gives me below error.
"The image file D: is Valid, but is for a machine type other than the current machine."
View 1 Replies
View Related
Jun 27, 2012
I was trying to delete the database in the test server. When i was deleting listener was already stopped, i continued deleting using dbca, it shown me some alert that datafiles cant be deleted because system could't find database, since listner was stopped so only service was deleted(the one showing in the windows administrator toolsservicesOracleServiceTEST).
All the datafile parameter files are still there. How can i delete the datafiles and parameter files belongs to that database or how to create the deleted service, so that i will start the listener and do the complete deleting of the database.
View 3 Replies
View Related
Feb 13, 2013
I am trying to find the unix process for one of my application in the database but I am unable to view the same. To simulate, I did the following.
1. My database runs on different server.
2. I invoked "sqlplus" from another unix box to login to the database.
3. I found that the process id (ps -ef |grep sqlplus).
4. When I execute the below mentioned query it does not display the process id that I am looking for. But the osuser, username, program and machine details are correct. How can I know the process details from the database?
SELECT SYS.GV_$SESSION.OSUSER, SYS.GV_$SESSION.USERNAME, SYS.GV_$PROCESS.SPID,
SYS.GV_$SESSION.MACHINE, SYS.GV_$SESSION.PROGRAM,
SYS.GV_$PROCESS.PROGRAM ,SYS.GV_$SESSION.SQL_ID
FROM
SYS.GV_$PROCESS, SYS.GV_$SESSION
WHERE
SYS.GV_$PROCESS.ADDR=SYS.GV_$SESSION.PADDR and SYS.GV_$SESSION.USERNAME='TEST'
and SYS.GV_$SESSION.MACHINE like '%hostname%'
View 3 Replies
View Related
Jul 26, 2010
While creating the index we are getting the error "ORA-00603: ORACLE server session terminated by fatal error".
We have the space in tablespaces and also in the file systesm.
View 13 Replies
View Related
Apr 19, 2011
I want to install Oracle 11g R2 in windows 2008 64 bit server. How can I know whether my server is ready to install Oracle ie is all components are available in server or any patch is to be applied etc.
View 3 Replies
View Related
Jun 29, 2013
I'm trying to connect a oracle client application on the client machine to a remote oracle server on the server machine but i get a connection fail.
On the server machine I configured oracle server in the following way:
Installed oracle server. Created a database "DB_Test" with the database configuration assistant Created a LISTNER with the Oracle NET Manager with the following parameter:
Protocol: TCP/IP HOST: server pc hostname (ENZOVAIO) or server machine address ip (192.168.0.71) in the network lan Port Number: 1521 Created "dbtest" service with the Oracle NET Manager with with the following parameter:
Service Name: "dbtest" Protocol: TCP/IP HOST: server pc hostname (ENZOVAIO) or server machine address ip (192.168.0.71) in the network lan Port Number: 1521
All services on the server machine are running and I opened port number (1521) in the router. On the client machine I installed SQL PLUS and SQL Developer.
With SQL Plus as by the official documentation I have entered the following command:
CONNECT username/password@[//]host[:port][/service_name]. In my case is:
CONNECT SYSTEM/oracledb@//ENZOVAIO:1521/testdb.
With SQL Developer I have entered the same parameter.
But with both SQLPlus and SQL Developer the connection fails.
View 14 Replies
View Related
Aug 10, 2010
we have oracle server. we have to connect 500+ client machine to oracle server.
is it i need to install client version to all 500+ or any other shortcut way?
View 6 Replies
View Related
Sep 22, 2010
We performed image copy of production Oracle server (OS and instances) to a backup server. After a few weeks, we try to restore a latest Oracle database backup from production server to backup server. As we know, Oracle instance must be unique on the network.
Even we log on to backup server and bring up the instance, I think that still point to production instance since all init file, TNSNAMES.ora and listener file are still same. If we restore the database, we will end up bring down the production instance and restore on top of productions. How to change instance name on backup server including TNSNAMES, sqlnet, listener files in order for us to restore Oracle database from production to backup server?
View 2 Replies
View Related
Jul 19, 2011
I am connected as System. It was the only user I set-up a password when installed the database on personal computer.
SQL> alter user sys identified by mypass007
2 /
User altered.
SQL> connect sys/mypass007
ERROR:
ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
[code]...
SQL> conn sysoper/mypass007
ERROR:
ORA-01017: invalid username/password; logon denied
View 1 Replies
View Related
Apr 11, 2012
We will be having a meeting with our client regarding their Database Server Migration (They are planning to buy a new server). Their current database is Oracle 10gR2, they will not upgrade to 11g, they just plan to migrate to a new more powerful machine.
I was planning to ask the following questions.
1. Specifications of the current server and the new one.
2. Operation system (I think they will use same OS, just an updated one)
3. Can the business afford full downtime on current servers?
4. Size of the DB, because it can take hours to move large files.
And is there documentation regarding Server Migration (Change of machine only, not database upgrade or anything,
View 5 Replies
View Related
Jul 17, 2013
Does a 10g oracle client works with an Oracle 11g server?
View 1 Replies
View Related
